Develop Bugs

[Q] galaxy s3 i747m ROGERS to jelly bean cm10

hey guys
let me start off by saying i am a noob to this site and android in general , ive learnt a lot from my galaxy s2 .
now i got the s3 , ive rooted it .. however i tried to upgrade to 4.1 awhile back . kept getting error .
anyways i want to upgrade to jellybean im sick of waiting like everyone else.
cm10 seems like a good rom , ive read a lot on this forum, could some one tell me what the first step is do i flash cwm first on the rogers stock or do i have to put ATT stock on it
thanks
cheers

Hi!
Welcome to the site! You'll really love the community here!
Here are some simple instructions I found for you: http://www.androidauthority.com/gal...elly-bean-cyanogenmod-10-cm10-preview-104742/
Just make sure you download the latest CWM from here (6.0.1.2 currently): http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.1.2-d2att.img
And flash it to your device.
Then follow those steps, wipe/format data partition, as it says there. CAREFUL make sure you download the latest CyanogenMod version from here too, the top one on the list is always newest, latest version came out today actually: http://get.cm/?device=d2att
Let me know how it goes and if you're enjoying it! Tried leaked version of JB on my S3 with Telus in Canada and didn't like the bugs in there...so let me know if the 'CM Finishing Touch' on there is really better than stock!
Michael

thanks man. i will give it a try soon and let you know..
so just i get this straight i can do everything from my rogers stock rom right .. i dont have to download the att stock rom ??
starting off with the flashing of cwm recovery ?
cheers

totti107 said:
thanks man. i will give it a try soon and let you know..
so just i get this straight i can do everything from my rogers stock rom right .. i dont have to download the att stock rom ??
starting off with the flashing of cwm recovery ?
cheers
Click to expand...
Click to collapse
Yup! Start off with CWM Recovery flash, when that's done, transfer file to device (internal sd card) and from the ROGERS stock rom you can do the apply update from zip option in CWM.
Michael

greenglue said:
Yup! Start off with CWM Recovery flash, when that's done, transfer file to device (internal sd card) and from the ROGERS stock rom you can do the apply update from zip option in CWM.
Michael
Click to expand...
Click to collapse
hey i downloaded all the files..
first i opened odin i couldn't find cwm in the pda. so i downloaded it again and added .tar at the end of the file name so it is now visible in pda odin
i flashed it succesfully however when i go to recovery mode it goes to android system recovery ?? not cwm recovery
iam i doing something wrong

totti107 said:
hey i downloaded all the files..
first i opened odin i couldn't find cwm in the pda. so i downloaded it again and added .tar at the end of the file name so it is now visible in pda odin
i flashed it succesfully however when i go to recovery mode it goes to android system recovery ?? not cwm recovery
iam i doing something wrong
Click to expand...
Click to collapse
Hmm...try ROM Manager free from the Play Store. If not just google around how to install CWM, installed it a while ago so I forgot sorry. But ROM Manager should work.

greenglue said:
Hmm...try ROM Manager free from the Play Store. If not just google around how to install CWM, installed it a while ago so I forgot sorry. But ROM Manager should work.
Click to expand...
Click to collapse
should i take off auto reboot then take out battery... i remember doing this when i rooted the phone . i think...
oh and for rom manager i cannot find my phone on the list , there isn't any galaxy s3 on it weird?

Hmm...weird. Guess it doesn't support the extra-super-duper-phone yet! Haha!
If you get the SGS3 All-in-one toolkit from here http://forum.xda-developers.com/showthread.php?t=1703488 , you can install CWM from it just make sure you have drivers installed, it can help you with that if you don't have them, and enable USB Debugging.
If that doesn't work, which I think it should, try to use this link a bit. Download the version they have it should be pretty recent.
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html

Hmm...weird. Guess it doesn't support the extra-super-duper-phone yet! Haha!
If you get the SGS3 All-in-one toolkit from here , you can install CWM from it just make sure you have drivers installed, it can help you with that if you don't have them, and enable USB Debugging.
If that doesn't work, which I think it should, try to use this link a bit. Download the version they have it should be pretty recent.
i cant find my phone version on the tool kit :S
but why cant i get cwm to work with odin ? that is angering me lol
i just rooted it again with superuser with galaxys3uscanada and installed superuser through cwm version 5. somthing
hxxp://androidroot.org/watch_video.php?v=28GYMH82S6Y1#
with this video... but i had to remove the battery and take auto reset off for it not to overwrite cwm recovery

totti107 said:
i cant find my phone version on the tool kit :S
but why cant i get cwm to work with odin ? that is angering me lol
i just rooted it again with superuser with galaxys3uscanada and installed superuser through cwm version 5. somthing
hxxp://androidroot.org/watch_video.php?v=28GYMH82S6Y1#
with this video... but i had to remove the battery and take auto reset off for it not to overwrite cwm recovery
Click to expand...
Click to collapse
Oh so now you have CWM? Well as long as you have it, you'll only need it once or twice to erase all data, then install CM and GApps.

Ill try it with the cwm from the superuser one but I remember doing that it said error 9 or something
Sent from my SGH-I747M using xda premium

Quick question, I flashed CWM recovery using the terminal, and I see it when I boot into recovery, but when I go to ROM Manager to flash CM10, it says to flash CWM Recovery, and won't let me access the list. I would've flashed CWM from ROM Manager, but the S3 wasn't on the list of devices. Is there anyway to get around this?

ily112 said:
Quick question, I flashed CWM recovery using the terminal, and I see it when I boot into recovery, but when I go to ROM Manager to flash CM10, it says to flash CWM Recovery, and won't let me access the list. I would've flashed CWM from ROM Manager, but the S3 wasn't on the list of devices. Is there anyway to get around this?
Click to expand...
Click to collapse
Hi there!
Basically you must first but the CWM ZIP file on your internal sdcard then boot into CWM, from there go to install zip file or something like that, then select from SD Card, find the zip, you're done!
Don't forget to do a factory reset through CWM before the CM10 update and maybe after too.
Let me how it goes,
Michael

Never liked CWM, I personally love TWRP as a recovery. Go to the app store and download GooManager.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

But don't I already have CWM? Or is CWM and CWM Recovery two different things? Where would I get the CWM .zip for my rogers phone? I backed up my phone from recovery mode, does that mean I backed up my current ROM (stock rooted ROM)? And I backed up a few apps using Titanium Backup, if I use factory reset, would all my backups get erased? Thanks for your help!

ily112 said:
But don't I already have CWM? Or is CWM and CWM Recovery two different things? Where would I get the CWM .zip for my rogers phone? I backed up my phone from recovery mode, does that mean I backed up my current ROM (stock rooted ROM)? And I backed up a few apps using Titanium Backup, if I use factory reset, would all my backups get erased? Thanks for your help!
Click to expand...
Click to collapse
Hi,
CWM = CWM Recovery; same thing just shorter .
The ZIP file for your rogers phone can be found here: http://get.cm/?device=d2att
Click the one at the top of the list as it is the newest.
Don't worry about the ROM because worst case scenario if you want to downgrade to stock, you can re-download it online and re-root.
For the apps, it depends where your backups are, usually, in TitBak, the backups are stored in /sdcard/TitaniumBackup which will be safe as formatting to factory settings and data partition in CWM doesn't format the internal or external SD Card. But I am not responsable if it does so be careful!
Michael

Also, I just got a notification to update SuperUser, which takes me to the Playstore, but on I remember seeing not to update SuperUser on the thread where I was told how to root my phone. So do I update it or not?

ily112 said:
Also, I just got a notification to update SuperUser, which takes me to the Playstore, but on I remember seeing not to update SuperUser on the thread where I was told how to root my phone. So do I update it or not?
Click to expand...
Click to collapse
You can update it, I don't see what could go wrong because an update will only help fix things if there were bugs you had.

Okay, thanks! I'm going to use this <http://forum.xda-developers.com/showthread.php?t=1587607> guide to flash the cm ROM. But say afterwords, I want to unroot and remove the 'Modified' status of my phone, and return back to the stock ROM like nothing happened, and remove the flash counter. How would I do that?

ily112 said:
Okay, thanks! I'm going to use this <http://forum.xda-developers.com/showthread.php?t=1587607> guide to flash the cm ROM. But say afterwords, I want to unroot and remove the 'Modified' status of my phone, and return back to the stock ROM like nothing happened, and remove the flash counter. How would I do that?
Click to expand...
Click to collapse
That would be with Odin you would redownload the Stock ROM for Rogers and then flash it. To reset counter, you can download the app TriangleAway for free from the Play Store and with root, it resets the counter. Then you can unroot.

[Q] Can I return to stock Koodo?

Hey guys/gals,
I recently bought a Koodo Galaxy s2x. After a few weeks I looked online and saw that there were some JB Roms for my phone. I couldn't resist and tried to flash one after rooting. I didn't have many problems with it, but there were some glitches that started to bug me, so I decided to see about going back to stock (I should have done this first I know). So then after hours(many) of searching, the best I could find was a T-Mobile stock Rom I decided to try and flash it (both times via odin). I also read somewhere that I should use darkside superwipe to clear my cache, so I tried that, but ever since that CWM stopped working on my phone. anytime I tried to do any back up or anything it just froze, and I had to hard boot. Finally I just tried flashing T-Mobile stock ICS, and Odin said "Failed". I decided to just unplug my phone, as I thought I already screwed it up, but after rebooting, the T-mobile Rom worked. I don't understand why it works fine if the Flash Failed. Now, I can no longer connect to kies (I'm hoping official JB will be shipped soon!), and I am wondering if I can somehow return to a stock Koodo Rom, and if it will connect to Kies again, as it previously had. I have looked a lot and have not found anything that I fully understand. I'm not overly experienced, which is why I should not have flashed to begin with. This is the closest thread I have found to help me, but I don't fully understand what all I need to do:
"Haven't seen anyone shared this yet.
Here's the KOODO ICS 4.0.4 stock ROM I used CWM to flash to stock after I tried the custom ROM.
h t t p s : / / sourceforge.net/projects/koo...d.zip/download
I also flashed DARKSIDE.SUPER.WIDE before I flashed this or you can used CWM Recovery 6.0.1.2 to wipe system and cache."
Is it possible for me to get back to stock phone? and still connect to Kies? and then possibly upgrade to JB through Kies if Hercules ends up receiving it?
Thanks for any help you can give me. Here is all my current phone info incase this helps:
Model:
SGH-T989
Android Version:
4.0.3
Baseband version:
T989DTLLG2
Kernel version:
3.0.8-perf-T989UVLE1 -CL508451
[email protected] #1
SMP PREEMPT Sun May 6 15:07:07 KST 2012
Build number:
IML74K.UVLE1
Thanks.

If your ultimate goal is to get Jellybean on your phone, check the development section of this subforum. There are numerous stable and wonderful JB roms (AOKP Milestone 6, Liquid Smooth, CM10).
To get back to your stock ROM, download it from here: https://sourceforge.net/projects/koo...d.zip/download
Then, go into recovery (NOT odin), and flash the rom.

arcsine said:
If your ultimate goal is to get Jellybean on your phone, check the development section of this subforum. There are numerous stable and wonderful JB roms (AOKP Milestone 6, Liquid Smooth, CM10).
To get back to your stock ROM, download it from here: h t t p s ://sourceforge.net/projects/koo...d.zip/download
Then, go into recovery (NOT odin), and flash the rom.
Click to expand...
Click to collapse
That link doesn't work, it says cannot find page. Also, my phone is currently not rooted, does it have to be rooted to flash from recovery? if not what do I do to flash from recovery? I know how to get into recovery, but after that do I use 'apply update from external storage'? Do I have to wipe the cache first?
Thanks.
PS: I just want to be able to get back to stock for now. At least until I learn more about flashing Roms. There is still lots for me to learn, like kernels, radios, Nightly's for official Roms, or even how to properly flash a rom without feeling lost. If I know a way to get back to stock comfortably, It will give me more reason to try some other Roms (once I learn how).

Here is a working link to the stock Koodo ROM: http://sourceforge.net/projects/koodostock/files/KOODO_SGH-T989D_Stock_Signed.zip/download
Are you running a custom ROM right now or your stock ROM? If you're running a custom ROM, it should come with root privileges. If you are running the stock ROM, you can just back it up instead of needing to download the zip from sourceforge. This guide will help you get rooted: http://galaxys2root.com/t-mobile-galaxy-s2/how-to-root-icsgb-on-t-mobile-galaxy-s2-sgh-t989/. After rooting, get into recovery mode (if you can't get the button combinations to work, there is an app. called quick boot which reboots you into recovery/bootloader/etc). If you don't have a recovery or it's corrupt, download ROM manager from google play, and choose the 'install clockwork recovery'. Reboot to recovery to make sure it works, then uninstall rom manager (it's been known to cause bugs if you use it for other things - and I'd recommend other recoveries such as TWRP but it's a bit more advanced). From your recovery's screen, there should be a backup option. Make a complete backup and name it something appropriate. To flash a ROM, download it and put it on your storage drive. Reboot to recovery, and go to wipe. Wipe your data (factory reset), and system (only really need to wipe data in most cases, but be safe). To flash the custom ROM now (or flash the default ROM I just linked), there should be an option to 'install zip from sd card' or something similar. Choose that, browse to your ROM and install it. After installing, go to wipe and wipe your cache+dalvik cache, then reboot. There are several beginner guides sticked in the development forum, along with explanation of terms like radio/kernel/nightly/etc.

arcsine said:
Here is a working link to the stock Koodo ROM:
Are you running a custom ROM right now or your stock ROM? If you're running a custom ROM, it should come with root privileges. If you are running the stock ROM, you can just back it up instead of needing to download the zip from sourceforge. This guide will help you get rooted:. After rooting, get into recovery mode (if you can't get the button combinations to work, there is an app. called quick boot which reboots you into recovery/bootloader/etc). If you don't have a recovery or it's corrupt, download ROM manager from google play, and choose the 'install clockwork recovery'. Reboot to recovery to make sure it works, then uninstall rom manager (it's been known to cause bugs if you use it for other things - and I'd recommend other recoveries such as TWRP but it's a bit more advanced). From your recovery's screen, there should be a backup option. Make a complete backup and name it something appropriate. To flash a ROM, download it and put it on your storage drive. Reboot to recovery, and go to wipe. Wipe your data (factory reset), and system (only really need to wipe data in most cases, but be safe). To flash the custom ROM now (or flash the default ROM I just linked), there should be an option to 'install zip from sd card' or something similar. Choose that, browse to your ROM and install it. After installing, go to wipe and wipe your cache+dalvik cache, then reboot. There are several beginner guides sticked in the development forum, along with explanation of terms like radio/kernel/nightly/etc.
Click to expand...
Click to collapse
Thanks a ton... Worked perfectly! I'm hoping it will connect to Kies once again.. I'll let you know if it works.
Unfortunately, I still can't connect to Kies.. It just sits at the Loading status (for like 10-15 mins). But At least I don't have all of the T-mobile apps and stuff anymore!

Wierd Problem ? Please Help. (Bricked)

Hi i've come here many times before for any hiccups that came up for me with my phone but this time I believe I need help. I'll start it off with me earlier this week I was running CyanogenMod 10.1 and felt like I wanted to change it up leading me to isntall synergy onto my S3 (completed two nights ago). Today I decided it just wasnt doing it for me. Picked a new ROM ( Paranoid ).
This is where the problem comes in, I started the usual to flash a new ROM, put it into recovery and then started the factory/data reset. it froze waited half an hour for it to complete but it did'nt. Rebooted it into recovery as now I cant boot back into the software anyways. tried the same thing but wiped the cache and dalvik cache first. same thing happened froze on the factory reset. At this time I decided to reset it completley and get rid of the root, flashing the stock firmware. Odin also froze everytime, I cant even reinstall the stock firmware after failing everytime around the Nand area. I found this thread (http://forum.xda-developers.com/showthread.php?t=1840030) with I think a similar problem im really not sure as I cant do anything but the thing is, is that its for Verizon Galaxy S3 ( im on Rogers Canada). I'm sure I can fix this somehow as I can put it into download mode still but any help from the community would be greatly appreciated.

How far does Odin get during the stock ROM flash, before it freezes up on you?
I would try to Odin a stock recovery. Not the ROM & everything, just the recovery. Then go into the stock recovery and wipe everything.
Then Odin the stock ROM. Maybe try an ICS one if you were failing on the JB one.

CZ Eddie said:
How far does Odin get during the stock ROM flash, before it freezes up on you?
I would try to Odin a stock recovery. Not the ROM & everything, just the recovery. Then go into the stock recovery and wipe everything.
Then Odin the stock ROM. Maybe try an ICS one if you were failing on the JB one.
Click to expand...
Click to collapse
It says Nand write start, and then complete (write) operation failed. On the phone in download mode it says Secure check Fail : aboot . CMW works for me still ? is that what you mean ? if so the data/factory reset freezes. I do have a RecoveryGalaxyS3USCanada.tar file in my Root folder, if I should flash that.... but its been so long I forget what its for. Thank you for the feedback ive been searching all day and wasnt able to find anything useful so far. Right now im downloading older stock firmwares to attempt to flash them, hopefully they pan out.

The utility in this thread offers an option to flash the stock recovery. I'd try it out and see what happens!
http://forum.xda-developers.com/showthread.php?t=1746665
Flash stock recovery and then boot to the stock recovery and restore to defaults. Then flash a stock ROM.
Stock recovery = Samsung recovery, not TWRP or Clockwork.

I had 2 soft bricks with cm this week. Had to Odin back to rooted stock for one. The other back to rooted stock and had to factory reset with Samsun 3e recovery before the phone would boot.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Okay i've installed everything (drivers, toolkit, deleted Kies) and now when im going in to flash the stock recovery it says its waiting for USB debugging, which I can't re-anable since im stuck in a boot loop. Am I screwed here ?

French1747 said:
Okay i've installed everything (drivers, toolkit, deleted Kies) and now when im going in to flash the stock recovery it says its waiting for USB debugging, which I can't re-anable since im stuck in a boot loop. Am I screwed here ?
Click to expand...
Click to collapse
can you still access recovery? i'm assuming it's twrp or cwm
if so, here's cwm flashable stock firmware from upndwn4par. flash it, boot in, turn on debugging.
http://d-h.st/8OQ

xBeerdroiDx said:
can you still access recovery? i'm assuming it's twrp or cwm
if so, here's cwm flashable stock firmware from upndwn4par. flash it, boot in, turn on debugging.
]
Click to expand...
Click to collapse
Thank you so much! I doubted it at first just because of the other roms and stock ones also never worked but this one has it up and running smoothy. I want to play it safe just so I dont screw up again so I'm gonna ask you guys one more thing.. Would it be safe to try and flash the Paranoid ROM now? ( I dont believe it was the problem earlier since I never actually got to installing it). The problem was something around the lines of not being able to write things onto the device. ex Data/Factory reset freezing everytime on CMW, while Odin also failed everytime it made to the step of flashing/writing in the stock ROM.
Thanks everyone, your're all very helpful !

If it were me, I'd Odin a stock/rooted JellyBean ROM first. Just to get to get all the correct files & structure on there. THEN I would flash whatever you want.

First, sorrt to speak french, but thatnll be more easy for me to tell it.
A partir du moment ou tu peux passer en mode download, tout va bien ^_^
Il m'est deja arrive sur mon teos de corrompre ma partition systeme et de repartir comme si de rien n'etait avec un flash.
Reflashe avec odin et reessaie
Sent with my AiKi and optimus rom

CZ Eddie said:
If it were me, I'd Odin a stock/rooted JellyBean ROM first. Just to get to get all the correct files & structure on there. THEN I would flash whatever you want.
Click to expand...
Click to collapse
French1747 said:
Thank you so much! I doubted it at first just because of the other roms and stock ones also never worked but this one has it up and running smoothy. I want to play it safe just so I dont screw up again so I'm gonna ask you guys one more thing.. Would it be safe to try and flash the Paranoid ROM now? ( I dont believe it was the problem earlier since I never actually got to installing it). The problem was something around the lines of not being able to write things onto the device. ex Data/Factory reset freezing everytime on CMW, while Odin also failed everytime it made to the step of flashing/writing in the stock ROM.
Thanks everyone, your're all very helpful !
Click to expand...
Click to collapse
i agree with coming from stock firmware when flashing. i would also make sure my cwm was up-to-date while i was at it. i would also boot into recovery and make a nandroid now so you'll have one. with that being said, here ya go:
http://forum.xda-developers.com/showthread.php?t=2179330
in the above link:
step 1: take the time to backup your imei if you havent already
step 2: this is stock with root already injected
step 3: if you dont have rom manager, download it and update your recovery if you're not running 6.0.2.3 or higher
step 4 & 5 are self explanatory
cheers

xBeerdroiDx said:
i agree with coming from stock firmware when flashing. i would also make sure my cwm was up-to-date while i was at it. i would also boot into recovery and make a nandroid now so you'll have one. with that being said, here ya go:
http://forum.xda-developers.com/showthread.php?t=2179330
in the above link:
step 1: take the time to backup your imei if you havent already
step 2: this is stock with root already injected
step 3: if you dont have rom manager, download it and update your recovery if you're not running 6.0.2.3 or higher
step 4 & 5 are self explanatory
cheers
Click to expand...
Click to collapse
The only thing so far (that I have noticed) is that the data/factory reset still does not work, I'm going to continue like you said earlier and flash stock recovery and my own stock firmware for Rogers now that I have turned debugging mode on. my cmw currently is 6.+ and my previous Nandroid backups would also get stuck when I tried to restore to them, I'm assuming that since I still can't factory reset that I wont be able to restore back to them but I will see. Should I make another nandroid even when its still in a semi-messed up state ?
Right now I seriously just want to get rid of the stupid data reset problem.

French1747 said:
The only thing so far (that I have noticed) is that the data/factory reset still does not work, I'm going to continue like you said earlier and flash stock recovery and my own stock firmware for Rogers now that I have turned debugging mode on. my cmw currently is 6.+ and my previous Nandroid backups would also get stuck when I tried to restore to them, I'm assuming that since I still can't factory reset that I wont be able to restore back to them but I will see. Should I make another nandroid even when its still in a semi-messed up state ?
Right now I seriously just want to go back to step one of everything, unrooted stock fimrware with access to Gapps and continue from there. Most of all get rid of the stupid data reset problem.
Click to expand...
Click to collapse
where are you saying the data/factory reset isnt working? cwm or in android settings?
i would download rom manager and update cwm to latest (6.0.3.0), boot into cwm recovery and try making a nandroid.
and i dont think you're as messed up as you think you are right now. you're rooted, with stock firmware and a custom recovery.
when i was ready, i would update recovery, in recovery make a backup, (still in recovery) wipe data/factory reset, wipe cache/dalvik, flash rom

xBeerdroiDx said:
where are you saying the data/factory reset isnt working? cwm or in android settings?
i would download rom manager and update cwm to latest (6.0.3.0), boot into cwm recovery and try making a nandroid.
and i dont think you're as messed up as you think you are right now. you're rooted, with stock firmware and a custom recovery.
when i was ready, i would update recovery, in recovery make a backup, (still in recovery) wipe data/factory reset, wipe cache/dalvik, flash rom
Click to expand...
Click to collapse
Google apps arent showing up for me either, Tried installing them and they did succesfully but i still dont see them. anyways I'm on a slightly lower version of cmw then 6.0.3.0 , can I flash the new version over the current one im on, since I cant install through the play store ?

French1747 said:
Google apps arent showing up for me either, Tried installing them and they did succesfully but i still dont see them. anyways I'm on a slightly lower version of cmw then 6.0.3.0 , can I flash the new version over the current one im on, since I cant install through the play store ?
Click to expand...
Click to collapse
boot into cwm and flash gapps again. flash twice to be sure. reboot. lemme know

I believe everything is working perfectly now, installed Rom manager from the web and updated cmw. Once more tried to data wipe from cmw and it froze again this time crashing by itself, I then went back into it went and formatted my data and then tried the wipe data, this time it worked for me and I proceeded to wipe the cach and dalvik, installed paranoid and everthing is working fine, ill post an update if i notice anything else happens but so far it looks perfect. Thank you so aton, I appreciate it guys especially you "Beer". Now I can relax on my birthday and stop tinkering around on my phone haha.
( Not sure why Gapps wer'nt working earlie,r but i'm done )

Same problem here
The same thing happened to me while trying to Odin to ATT stock rom. Flash stopped half way and Odin showed failed. Tried to reboot into download mode to repeat procedure and would not go into download mode. Phone will reboot but into android recovery mode. When I try to run an update from sd card I get a "file verification error" and the process aborts. I'm going to try this process to see if I have any better results.

[Q] unfortunately, System ui has stopped

i rooted my grand duos withn cwm , after that i installed some apps like titanium back up , ping my rom , etc
and made some changes in cpu , kernel through ping my rom
and from then after every 4-5 seconds it shows the above msg (unfortunately, System ui has stopped) and i cant operate phone
i reset facory data , wipe cache partition , but it of no use
please help me

COOLNILL said:
i rooted my grand duos withn cwm , after that i installed some apps like titanium back up , ping my rom , etc
and made some changes in cpu , kernel through ping my rom
and from then after every 4-5 seconds it shows the above msg (unfortunately, System ui has stopped) and i cant operate phone
i reset facory data , wipe cache partition , but it of no use
please help me
Click to expand...
Click to collapse
You probably changed something you shouldn't have. Wiping data/cache can only remove the apps you used to alter things, but it won't touch the system files or kernel files you have already altered. You need flash the ROM or firmware that you are using again to get your files back to normal. Make sure you backup your data first.

com.android.systemui has stopped for grand i9082
Hi,
I had upgraded from 4.2 to 4.4.4 as mentioned in the link (http://forum.xda-developers.com/showthread.php?t=2603219)
I have flashed the custom ROM (CYANOGENMOD) on my samsung galaxy grand i9082,
I was able to use this ROM perfectly for a weeks time.
But when I had changed the clock details (center alignment & Font)
I got the "Unfotunately com.android.systemui has stopped",
To resolve this I had done a hard reset (fornatted data/cache/dalvik cache and reinstalled the ROM)
but now I am getting this showstopper error during the first boot itself - I have not even been able to open the App drawer or settings menu.
Please help.
New to xda

Is this thread alive??
Having same problem in my galaxy grand 2 stock rom. So i decided to flash a custom rom but the same problem still persists.. I dont think I altered any rom files in stock rom. Someone please help me solve the problem..

getvaisakh said:
Having same problem in my galaxy grand 2 stock rom. So i decided to flash a custom rom but the same problem was still persists.. I dont think I altered any rom files in stock rom. Someone please help me solve the problem..
Click to expand...
Click to collapse
Download your tar file for stock rom from sammobile.com Download Odin.
Unzip the zip file to get tar. Go to download mode in phone and connect to PC. Open Odin and put the tar file in PDA. Check only autoreboot and f time reset. Leave others unticked.
Press start and wait for ROM to be flashed. It will take some time( unplug only after it says pass with green light).. After stock ROM is flashed, factory reset again. Then flash your custom recovery and your desired ROM. Remember , while flashing custom ROM, follow the instructions given in the respective thread.
This will be a clean install and the errors will go away, at the cost of your internal data being wiped.

NoobInToto said:
Download your tar file for stock rom from sammobile.com Download Odin.
Unzip the zip file to get tar. Go to download mode in phone and connect to PC. Open Odin and put the tar file in PDA. Check only autoreboot and f time reset. Leave others unticked.
Press start and wait for ROM to be flashed. It will take some time( unplug only after it says pass with green light).. After stock ROM is flashed, factory reset again. Then flash your custom recovery and your desired ROM. Remember , while flashing custom ROM, follow the instructions given in the respective thread.
This will be a clean install and the errors will go away, at the cost of your internal data being wiped.
Click to expand...
Click to collapse
Thanks for the reply...
Will try and get back to you if there is any problem..

systemu has stopped fixeds
iceyhotguy said:
You probably changed something you shouldn't have. Wiping data/cache can only remove the apps you used to alter things, but it won't touch the system files or kernel files you have already altered. You need flash the ROM or firmware that you are using again to get your files back to normal. Make sure you backup your data first.
Click to expand...
Click to collapse
Thx to you
I wipe the date and cache partition
Its fixed now <3 :laugh:
ty <3 :good:
1:- turn off mob
2:-Recovery mod>wipe date and cache
3:-go to advanced>Reboot to bootloader
FIXED

Samsung Galaxy Note 4 Inaccurate Touchscreen, Can't Flash ROMs

touch screen bugging out
Ok so my phone for some reason can't click on the exact location i seem to want to press
idk i was trying to flash the silly roms you guys have around here. for stock galaxy note 4 spr
i've been flashing for a while
and it seems none of them work anymore
i use the latest TWRP even used the other one CWM or something like that
i used odin even up to .10 from 1.85 even lower and still can't
even when i install (seems to be the only rom i can cm12)
the locations i press on my screen are buged out. so i have to press higher than i should to even get a click and its hard to text or anything.
i did factory resets, cashe wipes. deleted partitions.. what am i doing wrong ??
why can't this annoying this go away what am i missing guys ???
and why is it only 1 rom can flash on my phone ?? and i can't go back to any lollipop or anything ??
(i also tried flashing a superSU from the tWRP .. when i used CM 12 and it all successed but still
i have this thing where i can't click anywhere im on my phone directly i have to try and feel it out.. please help

1)what software version are you on now?
2)what rom are you trying to flash?
Note4 Rocking a Hybrid Rom

Not long ago, it was discovered flashing the wrong recovery will mess up the lock-screen.
Some were solved with KIES firmware restore; no root, straight to dialer type *#2663# and then TSP FW update. If KIES won't update it, power down, pull battery 30 seconds, Odin stock tar and boot then the dialer code and update.
Do that after you determine which stock tar or KIES update is recommended from Your response above.
Sent from my SM-N910P using Tapatalk

schlepprock said:
1)what software version are you on now?
2)what rom are you trying to flash?
Note4 Rocking a Hybrid Rom
Click to expand...
Click to collapse
I am using
Cyanogenmod version
12.1-20150814-nightly-trltespr 5.1.1
kernel 3.10.40-gef59855
baseversion
N910PVPU4COG5
GALAXY NOTE 4 SPRINT
How ever im trying to flash back to stock evrything.
so that i can flash a rom that uses stock fetures of note 4 (windows mode etc)
the cm 12 does not utilize these and i need those badly.
so i tried to go back even factory reset wipe all cashes
but some reasn during all those fails my system UI says fail. and my touchscreen is not in sync correctly.
i heard of wiping system cache not sure if i done that but with TWRP i wipe everything but SD

it seems this has been a common issue the word we are looking for is calibration issues
it seems it happens to this person exactly how it is happening to me
there was a solution at the bottom but those buttons do not work for galaxy note 4 spr
does anyone know the codes for doing so ?
source:
http://forum.xda-developers.com/note-4-tmobile/help/touch-screen-issues-root-t2986883

Did you see post 3?
I suspect you need to flash OG5 first. Use KIES or Odin. I would suggest wiping all but ExtSdCard and factory reset or format data partition, then power off; pull battery 30 seconds prior to stock tar or KIES recovery.
There's a guide you can follow as well as the OP in this post/thread. But see the steps on post 3, this thread. Boot into stock right after stock flash to try to recover your touch screen. If your touch screen is OK, then follow the guide below to root stock.
http://forum.xda-developers.com/showthread.php?p=62241991
Sent from my SM-N910P using Tapatalk

NatsarYAhu said:
I am using
Cyanogenmod version
12.1-20150814-nightly-trltespr 5.1.1
kernel 3.10.40-gef59855
baseversion
N910PVPU4COG5
GALAXY NOTE 4 SPRINT
How ever im trying to flash back to stock evrything.
so that i can flash a rom that uses stock fetures of note 4 (windows mode etc)
the cm 12 does not utilize these and i need those badly.
so i tried to go back even factory reset wipe all cashes
but some reasn during all those fails my system UI says fail. and my touchscreen is not in sync correctly.
i heard of wiping system cache not sure if i done that but with TWRP i wipe everything but SD
Click to expand...
Click to collapse
I recommend you flash this rom. Mostly stock but very stable,and the developer is working on some goodies.
http://forum.xda-developers.com/showthread.php?p=62336588
I recommend that you back up everything you want to keep because you need to wipe everything EXCEPT external SD card. Wipe cache, dalvik , system, and data three times. Then factory reset three times and then flash this rom.
Note4 Rocking a Hybrid Rom

samep said:
Did you see post 3?
I suspect you need to flash OG5 first. Use KIES or Odin. I would suggest wiping all but ExtSdCard and factory reset or format data partition, then power off; pull battery 30 seconds prior to stock tar or KIES recovery.
There's a guide you can follow as well as the OP in this post/thread. But see the steps on post 3, this thread. Boot into stock right after stock flash to try to recover your touch screen. If your touch screen is OK, then follow the guide below to root stock.
http://forum.xda-developers.com/showthread.php?p=62241991
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Ok so this stock actually went through will get with you shortly to let you know if sync is fixed,
edit: still not synced correctly but phone does finally work how i want just the main problem is bugged trying the link with *#2663# now
Edit: IT WORKED !!! big UPS BRO thank you !!!

i have same problem after install twrp and flash custom firmware phone working fine but touch won't work
i tried that *#2663# but not working on custom rom any solution to solve touch problem on custom firmware
thanks

imeicodes said:
i have same problem after install twrp and flash custom firmware phone working fine but touch won't work
i tried that *#2663# but not working on custom rom any solution to solve touch problem on custom firmware
thanks
Click to expand...
Click to collapse
Odin stock tar and try again.
There's also an update to CFAR (Chainfire auto root) for Note 4. After you fix your touchscreen, root with it and make a TWRP backup once that is installed. A TWRP restore plus full un-root in SuperSU may make OTA possible; CFAR backs up stock recovery.
You can use Flashify to install custom recovery. You may have installed the wrong recovery to have the touch screen out of cal like it is.
Sent from my SM-N910P using Tapatalk