Develop Bugs

My Samsung Note 2 is...BRICKED? Don't start (Galaxy Note 2 Brikkato, Non Parte !)

Hiii!!!
My Name is Adonis and i'm Italian Boy ^_^ Best fan for The GREAT JOB of This Site! i Vey Vey Love XDA! *_*
Mhhhh...but I try to ask your help..... :good: Pleasssseeeeee
I have the Some Problem with My NEW Samsung Galaxy Note 2....................
I recently installed a Root Permissions on Original Firmware, and I then installed a Custom Rom (I am Italian so I chose an Italian ROM COOKED ^ _ ^) of cis80. Up to yesterday's .. All okay!
For a Stroke, unfortunately, the phone started to reboot without any reason, and the last time it was restarted .. in a like Boot Loop... O_O The Phone Locked on screen "Samsung Galaxy Note 2 N7100" Without going on Next Logo of Loading (As Default What Samsung).
I've tried EVERYTHING .. but really .. I say to ALL! But nothing to do ..... What is the only one that I can to enter into "Download Mode" .. with Odin I've tried everything but everything I always returns "FAIL" or "Error Pit" & more .... or another Error. Also NAND Erase, nothing nothing... :_(
AIUTOOOOO!! I do not know Do! I have the Note 2 to 10 days c.a. ... and now I can't use it ..... My Beast is Down...

First, this isnt be .. a phone for kids.
Second, if you can enter into Download Mode, could be fixed. (If you couldnt enter you should need jig usb)
3rd, if you dont know what the hell are you doing, leave stock ROM.
Cya

Kashamalaga said:
First, this isnt be .. a phone for kids.
Second, if you can enter into Download Mode, could be fixed. (If you couldnt enter you should need jig usb)
3rd, if you dont know what the hell are you doing, leave stock ROM.
Cya
Click to expand...
Click to collapse
Ok Thanks.
But i Try....and i don't have any solution.
i tried load a Stock ROM with ODIN....but i have a Error....Because i have a "Error with a Table Partition"... "Error with Pit File"....i try load a Pit file, but not load anything.... can i do?

This is un example of report of ODIN:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXALIH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100OXXALJ1_BTU_CSC_factory.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Click to expand...
Click to collapse
and ODIN with last line come in standby... if i insert a PIT File for remapping of partition..if i not insert this, say there is an error with partition..... (
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
Click to expand...
Click to collapse

Adonis4U said:
This is un example of report of ODIN:
and ODIN with last line come in standby... if i insert a PIT File for remapping of partition..if i not insert this, say there is an error with partition..... (
Click to expand...
Click to collapse
What version of odin r u using? Try to get 1.85 version, redownload software for ur note2(try diferent version), run as administrator and try again.
Sent from my GT-N7100 using xda premium

szymi22 said:
What version of odin r u using? Try to get 1.85 version, redownload software for ur note2(try diferent version), run as administrator and try again.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I used the Version 3.04 e 3.07. But the Version 1.85 Not. Ok i Try!
I Tried used various Version of Stcok Firmware...All Italian...but nothingfor All...

Adonis4U said:
I used the Version 3.04 e 3.07. But the Version 1.85 Not. Ok i Try!
I Tried used various Version of Stcok Firmware...All Italian...but nothingfor All...
Click to expand...
Click to collapse
Try 1.85 odin and if that wont help try to download non italian rom, uk one works for me before when i fixed my friend note 2
Sent from my GT-N7100 using xda premium

You try
1. download Stock ROM file
2. Use Odin 3.07 (recommend)
3. Open Odin (on computer use normal harddisk. Not solid stat drive,SSD) check Auto Reboot and F. rest Time and Nand Erase All OR Repartition (If you have PIT file)
4. Check PDA and select Stock ROM (your downloaded)
5. Start
6. Finished Flash Rom. You Remove USB and restart Your phone will stop at samsung logo. Never mine. You restart again (Hold power button). Enter stock recovery mode (Vol Up + Home + power button).Your Phone show error can't read data.
7. In stock recovery menu. You check wipe cache. and wipe cache+factory reset. and restart your phone.
8. Your phone may come back normal.
good luck.

Need help rooting!!

Hi guys, I've been flashing for a while and well, I kinda broke the display on my old note 2. I did an claim, have my new one here right in front of me. I've never had a problem rooting before (I've broken more than one phone and I'm not proud). But for some reason, my odin v 3.07 keeps hanging up when attempting to flash the Note2-CWM-6.0.4.3-SGH-T889.tar file I downloaded from http://galaxynote2root.com/cwm-recovery. It's Max Lee's site, he's pretty great at keeping it updated, as you can see It's cwm 6.0.4.3.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
Right here is where it hangs up, now I've watched countless videos from official Root method here on the T-Mobile Note 2 XDA forum, http://forum.xda-developers.com/showthread.php?t=1955423
I've even used the .tar files from the ^^ thread as well to see if it yielded different results and it still hangs up at the same exact spot.
to Max Lee's tutorial, and everyone's Odin zips right through it. I'm sure it's only supposed to take a few seconds. Can anyone help me figure out what's going on? Point me in the right direction? I'd really really appreciate it! Thanks!

Did you run cf auto root yet? Or did you try exynos abuse app? Once rooted just use rom manager to install recovery. When I rooted mine I didnt even use my pc

mattlowry said:
Did you run cf auto root yet? Or did you try exynos abuse app? Once rooted just use rom manager to install recovery. When I rooted mine I didnt even use my pc
Click to expand...
Click to collapse
I've never used that method, I've seen that method in the OP of the How to root T889 thread http://forum.xda-developers.com/showthread.php?t=1955423. Are you aware if it's up to date? If so, I'll try this

Cf auto will work for sure. Exynos abuse is easer because its on your phone but doesnt always work.

mattlowry said:
Cf auto will work for sure. Exynos abuse is easer because its on your phone but doesnt always work.
Click to expand...
Click to collapse
Just tried the exynos abuser, didn't work. Going to try the other method, thanks

mattlowry said:
Cf auto will work for sure. Exynos abuse is easer because its on your phone but doesnt always work.
Click to expand...
Click to collapse
Cf Auto root is hanging up, but in a different spot.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
My phone's display isn't changing, it just stays at the downloading.... do not turn off target!!
Any clue what's going on?

XCrazedxPyroX said:
Cf Auto root is hanging up, but in a different spot.
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
My phone's display isn't changing, it just stays at the downloading.... do not turn off target!!
Any clue what's going on?
Click to expand...
Click to collapse
What are you trying to flash? I mean with the new phone?? Are you just trying to flash root??
Sent from my SGH-T889 using xda app-developers app

XCrazedxPyroX said:
Cf Auto root is hanging up, but in a different spot.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
My phone's display isn't changing, it just stays at the downloading.... do not turn off target!!
Any clue what's going on?
Click to expand...
Click to collapse
Maybe a silly question but you do have usb debugging enabled right? Are you in mtp or camera?

PhxDroid86 said:
What are you trying to flash? I mean with the new phone?? Are you just trying to flash root??
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I'm simply trying to install root, that's all. (CF-Auto-Root-t03g-t03gxx-gtn7100.zip unzipped, then PDA the CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 file) Once I get root, I can flash CWM myself, I've never had problems rooting before. It's always been with Odin, using pda, selecting the .tar file, and it'll simply root, and flash CWM, but if I could just get root, I'd be happy.

XCrazedxPyroX said:
I'm simply trying to install root, that's all. (CF-Auto-Root-t03g-t03gxx-gtn7100.zip unzipped, then PDA the CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 file) Once I get root, I can flash CWM myself, I've never had problems rooting before. It's always been with Odin, using pda, selecting the .tar file, and it'll simply root, and flash CWM, but if I could just get root, I'd be happy.
Click to expand...
Click to collapse
Have you uninstalled/reinstalled drivers? Used a different usb port? When connecting to odin (phone in download mode) what port is picked up (when going into device manager what port is odin picking up)??
Sent from my SGH-T889 using xda app-developers app

mattlowry said:
Maybe a silly question but you do have usb debugging enabled right? Are you in mtp or camera?
Click to expand...
Click to collapse
Developer options have been turned on, USB debugging is enabled, it is connected as a media device (MTP). I power it down, use the Volume Down+Home+Power combo, hit volume up to enter download mode. Hook it up to PC, open up Odin 3.07. Odin recognizes the Note 2 is there as it displays the COM:04 on the left. The only options checked is auto-reboot and f. reset time (default settings). I click PDA and I select the CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 file, I've tried the Note2-CWM-6.0.4.3-SGH-T889.tar file, I've tried multiple different .tar's and .md5's. They all hang up in Odin and my phone doesn't leave the Downloader screen. Is there anything I'm supposed to do BEFORE all of this that I'm just clumsily not remembering?! Thanks in advance!

PhxDroid86 said:
Have you uninstalled/reinstalled drivers? Used a different usb port? When connecting to odin (phone in download mode) what port is picked up (when going into device manager what port is odin picking up)??
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Also, when you go into qualcomm settings (through dialer) are your settings set to just "MTP" or "MTP + ADB"
Sent from my SGH-T889 using xda app-developers app

PhxDroid86 said:
Also, when you go into qualcomm settings (through dialer) are your settings set to just "MTP" or "MTP + ADB"
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I went to the dialer, and don't see any "qualcomm settings" after hitting menu. Where's that at?

XCrazedxPyroX said:
Developer options have been turned on, USB debugging is enabled, it is connected as a media device (MTP). I power it down, use the Volume Down+Home+Power combo, hit volume up to enter download mode. Hook it up to PC, open up Odin 3.07. Odin recognizes the Note 2 is there as it displays the COM:04 on the left. The only options checked is auto-reboot and f. reset time (default settings). I click PDA and I select the CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 file, I've tried the Note2-CWM-6.0.4.3-SGH-T889.tar file, I've tried multiple different .tar's and .md5's. They all hang up in Odin and my phone doesn't leave the Downloader screen. Is there anything I'm supposed to do BEFORE all of this that I'm just clumsily not remembering?! Thanks in advance!
Click to expand...
Click to collapse
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!
I tried a different USB port and got a little further.. Unfortunately when it powers down it removes itself and odin stops the process. Tried to turn on the phone and galaxy note 2 was little off center.
Scratch that!! powered down, reflashed the cf auto root and now I have root access! Thanks everyone! sorry for the hicup haha

XCrazedxPyroX said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!
I tried a different USB port and got a little further.. Unfortunately when it powers down it removes itself and odin stops the process. Tried to turn on the phone and galaxy note 2 was little off center.
Scratch that!! powered down, reflashed the cf auto root and now I have root access! Thanks everyone! sorry for the hicup haha
Click to expand...
Click to collapse
Glad to help, I had quite a few adventures end with simply switching usb ports in my day
Sent from my SGH-T889 using xda app-developers app

PhxDroid86 said:
Glad to help, I had quite a few adventures end with simply switching usb ports in my day
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I truly never would have thought the USB port could be the issue haha, should I take down this post or something since it's been solved? I've already got CyanogenMod and CWM hooked up
Sent from my SGH-T889 using XDA Premium 4 mobile app

I have a problem in my phone please help me .. galaxcy not 2 i want to root it but the odin give me this massage
Enter cs for md5
Check

[Q] i317 at&t soft bricked, please help!

Ok, I know someone is going to yell at me. I have searched for 24 hours on this site before deciding to post. Please don't verbally assault me too badly. Here is what happened, overnight, the phone must have gotten an OTA update. It is now frozen at the Samsung Galaxy screen.
I cannot get to CWM which I did have on 4.1.1
I can only get to download / ODIN mode (vol down, home, power.) So I downloaded Odin 3.07 (the newest i think)
I downloaded KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 (AFTER A LOT OF SEARCHING!)
I can get Odin to see my phone, com4, I put the above file in PDA and eventually get this....
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Am I doing something wrong? Is it the wrong file I am trying to flash? Is there any way to get CWM back? Because I do have semi recent backups. ANY help would be appreciated. I'm pretty much willing to pay somebody at this point.
Thanks and sorry if I missed the thread on this. I REALLY tried via google and internal XDA searches
- Keith

AT&T Galaxt note 2
Hoping those keywords garner more attention. I am still stuck with a non working phone and my SIM is in an iPhone 4s..... yuck

Also I have a PIT issue?
keithh85 said:
Ok, I know someone is going to yell at me. I have searched for 24 hours on this site before deciding to post. Please don't verbally assault me too badly. Here is what happened, overnight, the phone must have gotten an OTA update. It is now frozen at the Samsung Galaxy screen.
I cannot get to CWM which I did have on 4.1.1
I can only get to download / ODIN mode (vol down, home, power.) So I downloaded Odin 3.07 (the newest i think)
I downloaded KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 (AFTER A LOT OF SEARCHING!)
I can get Odin to see my phone, com4, I put the above file in PDA and eventually get this....
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Am I doing something wrong? Is it the wrong file I am trying to flash? Is there any way to get CWM back? Because I do have semi recent backups. ANY help would be appreciated. I'm pretty much willing to pay somebody at this point.
Thanks and sorry if I missed the thread on this. I REALLY tried via google and internal XDA searches
- Keith
Click to expand...
Click to collapse
At least with the MD5 file I am trying to load, It says I need a PIT file. Which I have downloaded, but it just sits there for what seems like forever then gives me this error....
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

keithh85 said:
At least with the MD5 file I am trying to load, It says I need a PIT file. Which I have downloaded, but it just sits there for what seems like forever then gives me this error....
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hey, I used to flash my phone like 3-4x a week and the I bricked it, this video helped me get back on my feet, hope it helps. Just go from there as a base and then you flash whatever you need to install on your phone. Good luck!
http://www.youtube.com/watch?v=WwNOAgopXvc

Pit file? I have found 2 PIT files. neither work
Looks like my phone needs to be re-partitioned also? I am completely lost. Reading some of the threads that might mean my internal memory went dead. Anyone?
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

keithh85 said:
Looks like my phone needs to be re-partitioned also? I am completely lost. Reading some of the threads that might mean my internal memory went dead. Anyone?
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
1) Try different USB port.
2) did you put your md5 file in a folder? If so check folder name.
3) Run odin as admin

reply
A_youu said:
1) Try different USB port.
2) did you put your md5 file in a folder? If so check folder name.
3) Run odin as admin
Click to expand...
Click to collapse
Yes to all 3.... I read something about SDS (Sudden death syndyronme) on galaxy phones. I think that's what happened. I really don't know but I cannot flash anything without needing pit file.

keithh85 said:
Yes to all 3.... I read something about SDS (Sudden death syndyronme) on galaxy phones. I think that's what happened. I really don't know but I cannot flash anything without needing pit file.
Click to expand...
Click to collapse
Can you post what it says on Download mode screen? Also, is it OTA update from At&t? If so may be it updated your bootloader version to 4.3. So, try to flash 4.3 rom (may be you can try stock).

Thanks for the reply, I will try a 4.3 rom
A_youu said:
Can you post what it says on Download mode screen? Also, is it OTA update from At&t? If so may be it updated your bootloader version to 4.3. So, try to flash 4.3 rom (may be you can try stock).
Click to expand...
Click to collapse
ODIN MODE (red)
Product name:
Current Binary: Samsung Official
System Status: Custom
Android guy
Downloading...
Do not turn off target!!

your other question...
A_youu said:
Can you post what it says on Download mode screen? Also, is it OTA update from At&t? If so may be it updated your bootloader version to 4.3. So, try to flash 4.3 rom (may be you can try stock).
Click to expand...
Click to collapse
Yes, AT&T kept telling me I needed to update. I would try to kill the screen but it would keep popping up over and over. So I finally let it download with the intention never installing it. I guess it did it without my knowledge.

PIT file....
I finally got ODIN to make some progress... But I do not know what to do from here. Picture attached.

keithh85 said:
I finally got ODIN to make some progress... But I do not know what to do from here. Picture attached.
Click to expand...
Click to collapse
Ok, Can you try to flash new stock rom? You can follow here - http://forum.xda-developers.com/showthread.php?t=2589891
Also, make sure that you don't flash "AT&T i317 ODIN 4.3 UCUBMJ4 (Leak) Bootloader & TZ (AT&T Note 2 ONLY)" bootloader as this bootloader is only for 4.3 leaded version.

Failed
A_youu said:
Ok, Can you try to flash new stock rom? You can follow here - http://forum.xda-developers.com/showthread.php?t=2589891
Also, make sure that you don't flash "AT&T i317 ODIN 4.3 UCUBMJ4 (Leak) Bootloader & TZ (AT&T Note 2 ONLY)" bootloader as this bootloader is only for 4.3 leaded version.
Click to expand...
Click to collapse
Same result... Here is the screenshot.

keithh85 said:
Same result... Here is the screenshot.
Click to expand...
Click to collapse
When Odin fails, are you getting any message on the phone itself? If you look in the top left corner it should display some information. Mine will usually give me a message when Odin fails.

phone screen
cameron213 said:
When Odin fails, are you getting any message on the phone itself? If you look in the top left corner it should display some information. Mine will usually give me a message when Odin fails.
Click to expand...
Click to collapse
No the phone never changes.

I'm "guessing" you may be having a problem with the ota bootloader. I've seen luck with this thread in restoring a soft bricked phone due to trying to flash from the ota 4.3 to the leaked 4.3:
http://forum.xda-developers.com/showthread.php?t=2581321
Might be worth a try. Hope it helps

flymacs said:
I'm "guessing" you may be having a problem with the ota bootloader. I've seen luck with this thread in restoring a soft bricked phone due to trying to flash from the ota 4.3 to the leaked 4.3:
http://forum.xda-developers.com/showthread.php?t=2581321
Might be worth a try. Hope it helps
Click to expand...
Click to collapse
I will give it a shot. I have nothing to lose at this point. I've been on an iPhone for 3 days now

flymacs said:
I'm "guessing" you may be having a problem with the ota bootloader. I've seen luck with this thread in restoring a soft bricked phone due to trying to flash from the ota 4.3 to the leaked 4.3:
http://forum.xda-developers.com/showthread.php?t=2581321
Might be worth a try. Hope it helps
Click to expand...
Click to collapse
I will try again but I see I already have that file on my PC. If I try to flash it, it fails and it says no PIT partition found. I am starting to think I have a hardware issue.

keithh85 said:
I will try again but I see I already have that file on my PC. If I try to flash it, it fails and it says no PIT partition found. I am starting to think I have a hardware issue.
Click to expand...
Click to collapse
Do you have pit file? If so try to give all files together in Odin -
pit file in "PIT" & select re-partition checkbox
ROM in "PDA"
and try to flash.

keithh85 said:
I will try again but I see I already have that file on my PC. If I try to flash it, it fails and it says no PIT partition found. I am starting to think I have a hardware issue.
Click to expand...
Click to collapse
Had posted a possible solution for you over on general then saw this thread...
http://forum.xda-developers.com/showpost.php?p=49378159&postcount=62
Includes link to the pit file

Samsung Galaxy Note 2 N7100

Hello,
First, my note 2 stuck at boot logo.
When i try to enter recovery stuck about 15 seconds on logo after that says with red failed to mount /efs (no such file or directory) ; failed to mount /system (no such file or directory); failed to mount /cache (no such file or directory) ; failed to mount /cacahe/recovery/last_recovery (no such file or directory) ; failed to mount /data (no such file or directory).
I read that it would be something about a "rescue fireware" was a topic on the XDA forum but no link was not working.
Please help me fast!
Thx!

alex2003881 said:
Hello,
First, my note 2 stuck at boot logo.
When i try to enter recovery stuck about 15 seconds on logo after that says with red failed to mount /efs (no such file or directory) ; failed to mount /system (no such file or directory); failed to mount /cache (no such file or directory) ; failed to mount /cacahe/recovery/last_recovery (no such file or directory) ; failed to mount /data (no such file or directory).
I read that it would be something about a "rescue fireware" was a topic on the XDA forum but no link was not working.
Please help me fast!
Thx!
Click to expand...
Click to collapse
Same happened to my phone too and no luck. still stuck! Someone help please!

If you can boot into Odin mode, flash a stock rom from sammobile.com.

audit13 said:
If you can boot into Odin mode, flash a stock rom from sammobile.com.
Click to expand...
Click to collapse
I tryed this no result

What happened when you used Odin? Post the Odin log?

audit13 said:
What happened when you used Odin? Post the Odin log?
Click to expand...
Click to collapse
Nand write fail. Or Sometimes, complete write operation failed!

audit13 said:
What happened when you used Odin? Post the Odin log?
Click to expand...
Click to collapse
When i try to put rescue firware with odin says setup connection after that fail.
Tomorrow i'm going to samsung official service.
I'll comeback with edit!

karanvirkohli said:
Nand write fail. Or Sometimes, complete write operation failed!
Click to expand...
Click to collapse
What does the log actually say? It probably failed when trying to flash a certain file.
Did you try different USB cables and USB ports?

Flash repair firmware
4 file
Sent from my GT-N7100 using Tapatalk

Hey, sorry for hijacking your thread.
I have the same problem. I tried many different scenarios and I couldn't fix it. I gave up and went to Samsung and after 48hs I called finding out that they refused to fix it. Talked to the IT guy and he said he has no idea how to fix it and told me the only fix is to change the whole motherboard and he said its not suggested to do so as its expensive. I have no idea what I should do. I flashed custom recovery, stock recovery. Tried to separate the whole firmware and flash it piece by piece using the skipsoft tool. I tried flashing PIT files with custom recovery, stock recovery, stock rom I have tried multiple PIT files from multiple websites.
This happens when I try flashing stock rom downloaded by samfirm or sammobile.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNL1_N7100OJVFOD1_N7100XXUFOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
If I to flash a PIT file using any of the scenarios mentioned above I get this ( the 4 files repair rom in this example )
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_XEF_N7100OXADLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
It will keep doing this forever until I unplug the cable. I'm running stock Kitkat 4.4.2 but all methods I find are for older versions with different bootloaders yet I still tried them as there are no recent fix from what I can find.

In the first situation, the sboot.bin causes an error because the bootloader in the ROM is older than the phone's current bootloader.
Did you try flashing the latest stock ROM from sammobile.com using Odin 3.07 in the PDA slot? Sammobile.com ROMs should only be unzipped once to yield a tar.md5 file and flashed in the PDA slot.
Tried different USB cables and USB ports?

audit13 said:
In the first situation, the sboot.bin causes an error because the bootloader in the ROM is older than the phone's current bootloader.
Did you try flashing the latest stock ROM from sammobile.com using Odin 3.07 in the PDA slot? Sammobile.com ROMs should only be unzipped once to yield a tar.md5 file and flashed in the PDA slot.
Tried different USB cables and USB ports?
Click to expand...
Click to collapse
Yes I did all that. Same error. If I extract the tar file and do another odin flashable tar using skipsoft tool it doesnt work, removing one file at a time didnt work either. I tried the latest on sammobile, the latest on sammobile for my country, and the latest from Samfirm for my country. I also tried using SmartSwitch and Kies recovery using the serial number and model number and they don't recognise the phone during downloading like about 60% of downloading it will show an error that it doesnt recognise it.

When flashing the sammobile.com tar.md5 file in Odin's PDA/AP slot, do you receive an error message? If yes, what is the error?

audit13 said:
When flashing the sammobile.com tar.md5 file in Odin's PDA/AP slot, do you receive an error message? If yes, what is the error?
Click to expand...
Click to collapse
Same exact error of post #10
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNL1_N7100OJVFOD1_N7100XXUFOA1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

The ROM being flashed has a bootloader that is too old or the ROM is not meant for the phone.
The model # for the phone has been confirmed as being a gt-n7100 on the Odin screen?

audit13 said:
The ROM being flashed has a bootloader that is too old or the ROM is not meant for the phone.
The model # for the phone has been confirmed as being a gt-n7100 on the Odin screen?
Click to expand...
Click to collapse
Odin screen that is in download mode ? Yes it says GT-N7100.

You're using the latest ROM for the phone? Which country?

audit13 said:
You're using the latest ROM for the phone? Which country?
Click to expand...
Click to collapse
Yes. Egypt. I have used both latest on sammobile and download by using samfirm. I have tried both of them. I have tried indian and few other countries all lead to the same error.

Are you using the original Samsung cable?

audit13 said:
Are you using the original Samsung cable?
Click to expand...
Click to collapse
It is not the one that came with the phone but it is one that I bought from Samsung. I also tried few other cables that came with LG and Asus phones.

flashable zip for J200GU stock

Hello,
I am unable to flash stock firmware back to my J200GU with Odin since it always gives me a fail.
So I was trying to flash directly on TWRP or ADB sideload but I always get an error with my zip firmwares.
Does anyone knows where to get the zip firmwares ready for ADB sideload or TWRP?
Sorry if it is a stupid question but I am really newb on this.
Thanks.

use noblerom/hydrarom meta-inf folder in your rom.

RevolverRz said:
use noblerom/hydrarom meta-inf folder in your rom.
Click to expand...
Click to collapse
I have tried what you recomended and TWRP proceeds to install hydrarom, however it is installed very fast and when it reboots i am stuck at bootloop. I believe it has sucessfully installed hydra but not the stock rom I wanted.
I have currently no OS on my phone or any firmaware so my guess is that to be able to install this custom roms (hydra and noble) i need to already have a stock firmware an this will be just an add on. Correct me if I am wrong.
Are the firmwares from SAMMOBILE ready to be used on TWRP? I am starting to think the are not to be used on TWRP but ODIN instead, but ODIN always gives me a fail. SO my question is: IS there a way to make roms downloaded from SAMMOBILE install on TWRP or adb sideload? Any guide about this?
Thanks. I appreciate any help since I have my J2 completly useless now

Can you post your Odin log?
or use the 4 files repair firmware.
https://www.androidfilehost.com/?fid=24407100847293886

RevolverRz said:
Can you post your Odin log?
or use the 4 files repair firmware.
https://www.androidfilehost.com/?fid=24407100847293886
Click to expand...
Click to collapse
Just tried the repair files and got this error on ODIN:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any more suggestions?

<ID:0/004> sboot.bin
<ID:0/004> FAIL!
Means this rom is not for you j200gu.
Use the most recent version of rom from here..
http://updato.com/firmware-archive-select-model?q=SM-J200GU&rpp=15&order=date&dir=desc&exact=1

pic upload edit
This is my phone. It was bought in Thailand and its dual sim. I am not sure which is the correct firmware for my phone since its dual sim. Can anyone guide me?

RevolverRz said:
Can you post your Odin log?
or use the 4 files repair firmware.
https://www.androidfilehost.com/?fid=24407100847293886
Click to expand...
Click to collapse
Thank you! Finally!
I have tried flashing using just the AP file instead of all 4 files and it worked. When I tried to use the 4 files together in Odin it failed but instead using only the AP I was able to install the firmware and get a PASS.
Thanks alot for all the help in this forum

sushyoshi said:
Thank you! Finally!
I have tried flashing using just the AP file instead of all 4 files and it worked. When I tried to use the 4 files together in Odin it failed but instead using only the AP I was able to install the firmware and get a PASS.
Thanks alot for all the help in this forum
Click to expand...
Click to collapse
Glad to hear that

FRP/FAP Locked
RevolverRz said:
Glad to hear that
Click to expand...
Click to collapse
I accidentally turned off the oem unlocking in dev options(couple of hours earlier) and then when i tried to change my emoticon pack it says FAP Lock. Thank you so much!!! :good: :highfive: (I use Samsung J200GU)