[Q] SensorHub and Magnetic Senor test FAILS every time. - Galaxy Note II Q&A, Help & Troubleshooting

I was checking out the builtin LCDTEST application which can be invoked by dialing the code *#0*# . I did some random tests using the app and a PASS message would be shown if successful. But not until I did the SensorHub test. Each time I do this test, the result is displayed as FAILED. Additionally following details are shown :
INT CHECK : NG
FIRMWARECHECK
MCU FIRM VERSION : AT0112111600
BIN FIRM VERSION : AT0112111600
MCU name: AT32UC3L0128
I decided to run all the test to see if any other tests would FAIL. And unfortunately, the MAGNETIC Sensor test too FAILED.
What might be the cause of this ? Does it happen because my phone is faulty ? HELP
NB : Mine is the international variant of Galaxy Note 2 (GT N7100) running the latest 4.1.2 JB .

INT CHECK : NG
FIRMWARECHECK
MCU FIRM VERSION : AT0112123109
BIN FIRM VERSION : AT0112123109
MCU name: AT32UC3L0128 fail

Related

[Q] URGENT !!! Need to know my one X is original or china clone

Hi, i just buy online the one X, i just want make sure it this phone CHINA clone set ????
but i open the benchmark software ( AnTuTu ) to check it show its original HTC , brand is htc_asia_hk, cpu everthing same like original
I also can not change to the othe rom, due to can not turn to (HBoot ),
ps help to my problem.
TQ.
i open about Phone as below detail
Android ver: 4.1.9,
baseband ver: 4.0 ,
Kernel ver : 1.28.708.10,
Build number : 4.12
Custom Build ver : HTCExtension_403_1_GA_7
when i try to ( Hboot ) it can not get in, so i try it ( press button volume down + power ) the phone go to Factory mode as below
Full Test
Item Test
Test Report
Clear eMMC
Version
Reboot
i go in version the detail as below
BB Chip : MT6577
MS board : G26
Modem Ver : MAUI.11ADM.W12.22.SP.V1, 2012/06/05
Bar code : MT012345678901.....................
Buid Time : Sun Oct ..............
UBoot Ver : 2010.06
Kernel Ver : 3.0.13-g69960c7 ([email protected]) (gcc version 4.4.3 (GCC) #1 SMP PREEMPT ........
Android ver : 4.1.9
SW ver : [email protected].V1
Custom Build Ver : release.V1.00
Ps let me know it is original or China clone set,
TQ
Please tech me , how to turn on my phone bootload / HBoot .
TQTQ
That's definitely not a genuine One X...
oqirong said:
Hi, i just buy online the one X, i just want make sure it this phone CHINA clone set ????
I also can change the othe rom, ps help to my problem.
TQ.
i open about Phone as below detail
Android ver: 4.1.9,
baseband ver: 4.0 ,
Kernel ver : 1.28.708.10,
Build number : 4.12
Custom Build ver : HTCExtension_403_1_GA_7
when i try to ( Hboot ) it can not get in, so i try it ( press button volume down + power ) the phone go to Factory mode as below
Full Test
Item Test
Test Report
Clear eMMC
Version
Reboot
i go in version the detail as below
BB Chip : MT6577
MS board : G26
Modem Ver : MAUI.11ADM.W12.22.SP.V1, 2012/06/05
Bar code : MT012345678901.....................
Buid Time : Sun Oct ..............
UBoot Ver : 2010.06
Kernel Ver : 3.0.13-g69960c7 ([email protected]) (gcc version 4.4.3 (GCC) #1 SMP PREEMPT ........
Android ver : 4.1.9
SW ver : [email protected].V1
Custom Build Verno : release.V1.00
Click to expand...
Click to collapse
never seen android 4.1.9 and if your phone doesn't boot to HBOOT, well that's a china clone! every one should have the HBOOT mode
That is just weird. Sounds like a knock off. Sorry dude.
Sent from my HTC One X using xda premium
To enter fastboot mode, you have to press and hold "power on" & "vol -" buttons at the same time. Try this combo.
Sent from my HTC One X using Xparent Blue Tapatalk 2
MediaTek (MT) chipset spotted, you will eventually get into uboot..
Yes, it is HTC One X's KIRF clone..
oqirong said:
Android ver: 4.1.9,
baseband ver: 4.0 ,
Kernel ver : 1.28.708.10,
Build number : 4.12
Custom Build ver : HTCExtension_403_1_GA_7
i go in version the detail as below
BB Chip : MT6577
TQ
Click to expand...
Click to collapse
Thats a fake phone, MT6577 is the CPU made by Mediatek, a cheap dual core CPU used on fake phones and many Chinee budget phones. If you run Antutu (not the one that came with the phone) the score should be around ~5500
Also there is no Android 4.1.9
Return it immediately~
oqirong said:
Hi, i just buy online the one X, i just want make sure it this phone CHINA clone set ????
but i open the benchmark software ( AnTuTu ) to check it show its original HTC , brand is htc_asia_hk, cpu everthing same like original
I also can not change to the othe rom, due to can not turn to (HBoot ),
ps help to my problem.
TQ.
i open about Phone as below detail
Android ver: 4.1.9,
baseband ver: 4.0 ,
Kernel ver : 1.28.708.10,
Build number : 4.12
Custom Build ver : HTCExtension_403_1_GA_7
when i try to ( Hboot ) it can not get in, so i try it ( press button volume down + power ) the phone go to Factory mode as below
Full Test
Item Test
Test Report
Clear eMMC
Version
Reboot
i go in version the detail as below
BB Chip : MT6577
MS board : G26
Modem Ver : MAUI.11ADM.W12.22.SP.V1, 2012/06/05
Bar code : MT012345678901.....................
Buid Time : Sun Oct ..............
UBoot Ver : 2010.06
Kernel Ver : 3.0.13-g69960c7 ([email protected]) (gcc version 4.4.3 (GCC) #1 SMP PREEMPT ........
Android ver : 4.1.9
SW ver : [email protected].V1
Custom Build Ver : release.V1.00
Ps let me know it is original or China clone set,
TQ
Please tech me , how to turn on my phone bootload / HBoot .
TQTQ
Click to expand...
Click to collapse
Turn off the phone, press Volume Up + Power button.
I think its a china clone... S/n looks weird and android version should be 4.0.4 with ota update.... Do you have Sense on it or it came Pure android UI?
Sent from my HTC One X using xda app-developers app
100% clon
I have that phone and is a clone, in aliexpress buy it for $ 220, and has exactly the same features that you've given.
Opens easily, really into having a 32GB SD Kinston. And you can easily remove the battery, not a one x Original ..................

[Q] Connection problem or invalid MMI code => INDONESIAN

Hello to all member
i come from indonesian. i have a problem with my new samsung galaxy S3 I-747 AT&T carrier. i buy this phone from ebay and has been unlocked from the seller. yesterday, i got this phone from post office in my country and try to use this phone. but i have a problem, when i try to check my token balance, i always got this notice :
"Connection problem or invalid MMI code"
This is my phone specification :
Model number : SAMSUNG-SGH-I747
Android version : 4.3
baseband version : I747UCUEMJB
Build number : JSS15J.I747UCUEMJB
anyone can help me with this problem ? i'm very noob about flashing. i'm affraid my phone is bricked
i will pay you if you can help me fix this problem via Bitcoin
thank you
there are several things you can try listed here:
http://www.technobezz.com/fix-connection-problem-invalid-mmi-code/

[Q] Redmi 1s No service , Wifi

New to the site, Hope im posting in the right place
I posted in the xiaomi website , and it was nothing but a waste of time , hope i find a solution here
I have a Redmi 1s and suddenly one day my phone showed no service
My problem : Wifi disabled , No service , phone taking very long to power off ,
I read a forum and according to that i flashed my phone
but still the problem persists
Network: Unknown
Signal Strength : 0 dBm
Mobile network type:Unknown
Service status : Out of service
Roaming: Not roaming
Mobile network state isconnected
My phone no : unknown
IMEI : Unknown
Model No; HM1S
Android version: 4.4.4 KTU84P
MIUI VERSION : 5.4.10 Beta
CPU : Quadcore 1.6 GHz
Ram : 1. GB
Internal Memory : 4.79 GB
Baseband Version : Unknown
After going through forums i think i have imei problem
kindly someone suggest me solution other than sercvice centre
or if i should post somewhere else let me know
slazerf said:
New to the site, Hope im posting in the right place
I posted in the xiaomi website , and it was nothing but a waste of time , hope i find a solution here
I have a Redmi 1s and suddenly one day my phone showed no service
My problem : Wifi disabled , No service , phone taking very long to power off ,
I read a forum and according to that i flashed my phone
but still the problem persists
Network: Unknown
Signal Strength : 0 dBm
Mobile network type:Unknown
Service status : Out of service
Roaming: Not roaming
Mobile network state isconnected
My phone no : unknown
IMEI : Unknown
Model No; HM1S
Android version: 4.4.4 KTU84P
MIUI VERSION : 5.4.10 Beta
CPU : Quadcore 1.6 GHz
Ram : 1. GB
Internal Memory : 4.79 GB
Baseband Version : Unknown
After going through forums i think i have imei problem
kindly someone suggest me solution other than sercvice centre
or if i should post somewhere else let me know
Click to expand...
Click to collapse
Same problem happened to me... I tried all the possible ways.........but unable to succeed.
I suggest you to go to service centre...(they will tell u motherboard of phone has gone... and they will replace it.)
Hey bro you should root your phone and flash any custom ROM recommend carbon lollipop
Press thanks button if helped you
That has to do with the beta OS, restart the phone with the Sim tray empty, boot it up, power it off, place the Sim back and power it back on.
The beta Roms are region specific, ensure you pick either the world ROM or the Chinese ROM, whichever region your phone was manufactured to run on.
try to flash with miui fastboot rom..and l think the problem from the custom rom..try to switch off and exchange your sim and turn it on..
Sent from my HM 1SW using XDA Free mobile app

E5577s-321

I got this model after i reset counter and tried all of codes available but not working. . Am i missing something ?? Plz help me ....
Found modem : E5577s-321
Model : Huawei AuthVer 4 modem (New)
IMEI : 867262020602254
Serial NR. : F5D7N15527005214
Firmware : 21.316.01.00.00
Dashboard version : WEBUI_17.100.13.01.03_MRE5
Web UI version : WEBUI_17.100.13.01.03_MRE5
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 2 (unlock attempts left : 8)
Sent from my iPhone using Tapatalk

Huawei UMG366 Wifi Dongle

Any one have unlock code or know how to unlock Huawei UMG366 T-Mobile Jet 2.0. I know the device is old, but I believe it is New algorithm and old algorithm code doesn't work. 48736981 doesn't work. Anyone have any ideas I'm running out of attempts.
Selected Applications port COM12
Found modem : UMG366
Model : Huawei UMG366 (T-Mobile JetTM 2.0)
IMEI : 863666010152233
Serial NR. : P2X7NA9370300099
Firmware : 11.809.09.02.420
Hardware ver. : CP1E366M
Voice feature : not supported in current firmware
SIM Lock status : Locked (CardLock)
Wrong codes entered : 4 (unlock attempts left : 6)
===================================================================
I found a V2 Calculator Online and was able to unlock.
DC - Unlocker 2 Client 1.00.1430
Detecting modem :
selection :
manufacturer - Huawei modems
model - Auto detect (recommended)
Found Applications port COM12
Found modem : UMG366
Model : Huawei UMG366 (T-Mobile JetTM 2.0)
IMEI : 863666010152233
Serial NR. : P2X7NA9370300099
Firmware : 11.809.09.02.420
Hardware ver. : CP1E366M
Voice feature : not supported in current firmware
SIM Lock status : unlocked
Wrong codes entered : 4 (unlock attempts left : 6)
===============================================

Categories

Resources