Develop Bugs

[FIX] Worse signal, dropped calls after installing new ROM

Hi all,
I've tried some rom and flash, and sometime i meet this probleme :
- get no or worse signal
- missed calls or dropped calls
- seems to get no 2g signal
Result => my phone became a pocket android....without gsm fonction...
Manytime i've saw other member met this problem....
So after many attemp, remplacing radio file in folder system/etc/motorola/bp_nvm_default has solved my problem for theses rom :
- Rooted and not froyo chinese rom
- JBoojie Eclair or Froyo (actually running)
- Milestone 2
- etc...
It work for me, so try it !
I've made a zip upgrade via Recovery mode with my working radio file (comes from original EU Eclair rom v2.34)
Please feeback
PS : i was using this source http://forums.whirlpool.net.au/archive/1596785
EDIT : fix confirmed by EU users

I'll try....
as I havn't found the file you providing here, I've got a question: Where are the radiofiles from (US ROM, Netherlands ROM....) ???

I've got the China 2.2 ROM running here, and I've made a file check. 4 of those 14 files are different to your files, but NOT by filesize.
Those files are:
File_Audio2
File_Audio8
File_GSM
File_Seem_Flex_Tables
I'm going to get those files from a 2.34 Central Europ ROM also to make this check again... stay tuned
Edit: those 2.34 Files exactly match your files.

Yes i've use 2.34, it has solve all my worse signal issue with many rom.
It could work only with my french operator, i don't know if it's needed for all ?
Also, try this if you are european user and if you meet signal problm after installing new modified froyo rom, it work for me.

dnsdenis said:
Yes i've use 2.34, it has solve all my worse signal issue with many rom.
It could work only with my french operator, i don't know if it's needed for all ?
Also, try this if you are european user and if you meet signal problm after installing new modified froyo rom, it work for me.
Click to expand...
Click to collapse
Did the ItfunzBaseBandSwitcher.apk alone not help improving your signal?

shamo42 said:
Did the ItfunzBaseBandSwitcher.apk alone not help improving your signal?
Click to expand...
Click to collapse
Hello,
i don't try it because i found the solution by replace radio file before the ItfunzBaseBandSwitcher.apk file posted....
I'll try it with next test rom (vanilla froyo), i'll let u know

This just solved my issues with T-Mobile (Germany) and Froyo ROMS. Thanks a lot!

ItfunzBaseBandSwitcher.apk work too, but not for the new T-mobile rom here :
http://forum.xda-developers.com/showthread.php?t=922430
slashvanyoung said:
This just solved my issues with T-Mobile (Germany) and Froyo ROMS. Thanks a lot!
Click to expand...
Click to collapse
Great You're welcome

I cant get HDSPA connection (Vodafone Spain) with new froyo T-Mobile Rom, this fix is not working.
Any idea??

pedrogamo said:
I cant get HDSPA connection (Vodafone Spain) with new froyo T-Mobile Rom, this fix is not working.
Any idea??
Click to expand...
Click to collapse
It seems like that is only a display iussue. For me it always show "3G", instead of "H" but when I use *#*#4636#*#* it shows either UMTS or HSPA depending if the telephone uses HSPA or not.

Thanks man!!!
it works perfectly for Vodafone Germany with Orange Deblur BlurlessGingerFroyo 4(Final) Rom!!!

dnsdenis said:
Hi all,
I've tried some rom and flash, and sometime i meet this probleme :
- get no or worse signal
- missed calls or dropped calls
- seems to get no 2g signal
Result => my phone became a pocket android....without gsm fonction...
Manytime i've saw other member met this problem....
So after many attemp, remplacing radio file in folder system/etc/motorola/bp_nvm_default has solved my problem for theses rom :
- Rooted and not froyo chinese rom
- JBoojie Eclair or Froyo (actually running)
- Milestone 2
- etc...
It work for me, so try it !
I've made a zip upgrade via Recovery mode with my working radio file (comes from original EU Eclair rom v2.34)
Please feeback
PS : i was using this source
EDIT : fix confirmed by EU users
Click to expand...
Click to collapse
Thank you!
After I replaced all the files in system/etc/motorola/bp_nvm_default , my 2G signal is back.
I am from Bulgaria/Globul, very new in this Andro-things, but before few days I rooted my Motorola Defy+.
I also did some things that I am not 100% sure what...changing rom, upgrading and etc...
However
Android version is 2.3.6
Model number: MB526
Baseband version: EPU93_U_00.60.03
System version: 45.0.2310.MB526.AsiaRetail.en.03
Kernel versioon: 2.6.32.9-ge281b6e...
Build number: 4.5.1-134_DFP-231
and this worked

[Q] very strange issue

hi,
first off all sorry for my poor english... :d
I bought a DHD from netherland actualy the phone comes from england( virgin telecom branded)
when i was home with my " new " phone. i started to unlock this machine.
- 1/ make a goldcard succeed
- 2/ downgrade to 1.32.x it was 1.75.x so i must be downgrade succeed
- 3/ radio s-off en then ENG s-off succeed
- 4/ then check my bootloader i have a supercid cid is 111......
everythink is okey so far my phone is unlockt.
now, in belgium we have 3 providers proximus, mobistar and base(kpn group)
if i insert proximus and mobistar i can send and talk no problem at all.
but if i insert base sim card i can't send or talk because i have no network,
but i have one think "mobile data" so i can to internet with gprs no network.
i have tried another base sim the same, i have tried my sim in other phone works perfect. i have talk to the service hotline they says everything is okey here you must be able to connect in our network.
when i try to manual search to a network en then select base i have a error
" your sim card doesn't allowed to register to this network"
i already install another radio, another rom...
who can help me, otherwise i gonna slam it to the f*cking wall.
thanks
my specs.
andriod : 2.3.2
baseband : 12.28b.60.140eu_26.03.02.26_m
kernel; 2.6.35.10-g4a4b278
build 2.16.0.0
andriod revolution hd 4 f*cking 0 :d btw: perfect rom i like it

Hi, don't apologise for your English, its perfectly understandable!
What frequencies does this Base use, are you sure the DHD supports them?
I remember a week or so back someone had the same issue with the Base network. I don't think that was resolved either.

hi,
base uses this band :E-GSM and DCS-1800
width(mhz) : 2 x 5 and for dhs-1800 :2 x 22
channel : 25 " " " " ; 110
i think desire hd is compatible with that frequencies stuff.
why have i grps network but no normal signals?
There is something to do with imei block or something?

I would try speaking to Base see if they offer support for DHD, if they do offer official support that would suggest it should work on their network, is Base in the APN list for ARHD?

i don't know exactly
i have been spoke with them. they says you must do a unlock for the phone
but i have already done, very f*king strange.
where you exacty can see for the arhd?
i think the best solution is: i gonna sell them, and buy a regular/no branded phone.
i worked 2 weeks with that phone.
erase everythink start again, again again. factory reset etc..
but sometimes i have network when i do restart iets gone again.
damn

nuri1 said:
but sometimes i have network when i do restart iets gone again.
damn
Click to expand...
Click to collapse
Sounds like an issue with ARHD to me, if you can see a network sometimes very strange, have you tried a different ROM? possibly just a rooted stock i.e one of the raidroid roms

[Q] Sim getting deactivated when mobile is idle

Hi Everyone,
Device Name : GT-I9082
Android Version : 4.2.2(Stock ROM)
Baseband Version : I9082LUBUBMK1
Kernel Version : 3.0.31-1329016 [email protected] #1 Mon Sep 9 22:12:54 KST 2013
Build Number : JDQ39.I9082XXUBMI1
Problem:
I bought Samsung galaxy grand duos I9082L from Abu Dhabi and i am using it in india. from last 3 years. I did not have any problem till now but unfortunately from last one week my mobile was unable to reach when it was idle(i.e. Mobile is turned on and battery is full, signal is good but still unable to reach) . I use the operator Airtel and when i switch off the phone and turn it on then again the sim receive incoming calls. Apart from that when i make some outgoing calls to anyone then immediately at the same moment within 5 or 10 minutes i can able to get incoming calls. There is no problem with outgoing and internet but i am getting irritated with incoming as many of my friends and family unable to reach me on time.
Steps taken:
1. I have rooted my device and installed stock rom on my device with indian firmware so build number and kernel version changed but baseband version did not change . Does Baseband version need to be changed to India ?
2.I have changed my sim card but still issue persists
Can somebody help me on this issue ? Your suggestions are more valuable
Thanks,
Praveen

[Q] Sim Deactives when mobile is idle

Hi Everyone,
Device Name : GT-I9082
Android Version : 4.2.2(Stock ROM)
Baseband Version : I9082LUBUBMK1
Kernel Version : 3.0.31-1329016 [email protected] #1 Mon Sep 9 22:12:54 KST 2013
Build Number : JDQ39.I9082XXUBMI1
Problem:
I bought Samsung galaxy grand duos I9082L from Abu Dhabi and i am using it in india. from last 3 years. I did not have any problem till now but unfortunately from last one week my mobile was unable to reach when it was idle(i.e. Mobile is turned on and battery is full, signal is good but still unable to reach) . I use the operator Airtel and when i switch off the phone and turn it on then again the sim receive incoming calls. Apart from that when i make some outgoing calls to anyone then immediately at the same moment within 5 or 10 minutes i can able to get incoming calls. There is no problem with outgoing and internet but i am getting irritated with incoming as many of my friends and family unable to reach me on time.
Steps taken:
1. I have rooted my device and installed stock rom on my device with indian firmware so build number and kernel version changed but baseband version did not change . Does Baseband version need to be changed to India ?
2.I have changed the sim but still issue persists
Can someone suggest a solution for this problem. Any valuable suggestion appreciated !!
Thanks,
Praveen

Huawei E5577Cs-321 Unlocked problems

Hey,
I have been using a Huawei E5577Cs-321 Viva which was unlocked when I got it. My software version is 21.329.01.00.00. Web UI version 17.100.11.08.397. I am having problems when using it, it seems certain sites trigger the router login page. When I enter for example yahoo.com without (https://www.) the router login page seems to open instead. It also happens when I use only www.(some websites).com. I figured it out that it has something to do with security, since when I use https://www.(some website).com it works. The funny thing is most sites seem to work ok, but this is a huge pain and also you can't always do this for weblinks or web redirects. Is there a solution? I've reset the router, used multiple browsers and different phones and laptops and it continues to happen.

I have the following text in DC unlocker
DC - Unlocker 2 Client 1.00.1277
Detecting modem :
selection :
manufacturer - Huawei modems
model - Auto detect (recommended)
Found Applications port COM17
Found modem : E5577Cs-321
Model : Huawei E5577 (untested)
IMEI : 864695039897667
Serial NR. : D2LDW18525001727
Firmware : 21.329.01.00.00
Dashboard version : WEBUI_17.100.11.08.397_MRE5
Web UI version : WEBUI_17.100.11.08.397_MRE5
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)
Can I downgrade without the modem locking? If so which softwae should I try? Right now it is V4 unlocked but, I was hoping if I can change the software it might work.

Solved. Router was downgraded to v. 21.328.62.01.397 and new Web Ui was installed. The router login redirects aren't happening as much as before.

Nobody has found a solution for this yet?

next4nextel said:
Solved. Router was downgraded to v. 21.328.62.01.397 and new Web Ui was installed. The router login redirects aren't happening as much as before.
Click to expand...
Click to collapse
Please help me on how to network unlock the e5577cs-321 ? software version 21.319.01.00.1387.
thank you.

Fixed It ...
I had The same Problem and it was because all the webui missing the dashboard quiq setup so it keep triggering the quiq set up page insted of some websites , i fixed it using T-Mobile webui wich will launch the setup page once and then it will work normally and her it is ...
3---E5577Cs-321_Update_WEBUI_17.100.20.00.709rd.exe
drive.google.com

Mhmd954 said:
Fixed It ...
I had The same Problem and it was because all the webui missing the dashboard quiq setup so it keep triggering the quiq set up page insted of some websites , i fixed it using T-Mobile webui wich will launch the setup page once and then it will work normally and her it is ...
3---E5577Cs-321_Update_WEBUI_17.100.20.00.709rd.exe
drive.google.com
Click to expand...
Click to collapse
Thanks brother, I was away for a while and did not see your post. I had successfully done the same with a T-mobile webui also around 6 months ago, it was a Russian or Eastern European, maybe Romanian T-mobile webui. This T-mobile webui stopped the redirects but it blocked a lot of sites, some social media, torrents and even regular sites, so I removed it. I then installed a generic webui and it was working fine until a few weeks ago and it started acting up again. Due to covid there hasn't been much work, so I haven't been buying data and using the 4g at all. Is your webui the same T-mobile one or a different one? Also does your device work in 3G? My device will only work on 4G or LTE. On 3G it will connect but will not load any pages, very low KB transfer rate less than 50KB/sec. I've tried different sims but it won't work in 3G. Can you send me the version # of your dashboard and firmware so I can confirm or not?

macTech007 said:
Please help me on how to network unlock the e5577cs-321 ? software version 21.319.01.00.1387.
thank you.
Click to expand...
Click to collapse
Sorry late reply, try this. Read whole thing carefully before trying. See if you can calculate the nck code without wiping your NVram. Meaning use only the usbsafe loader or the oem-nck_e5573b.bin loader.
Unlock Huawei Modems and Routers Free
If you have an Huawei Dongle and Router that needs unlock code, flash code, hash code etc you can get generate the codes yourself from the following links. 1. Huawei Modems (Old Algo most IMEI starts with 35-) V1 - Huawei Unlock Code Calculator...
forum.xda-developers.com

Which browser you are using. May be your Internet provider has done some firewall setting for http and www. Unlock mobile will not solve your problem.
You can get unlock code from imei number. You can install custom os of unlocked version.

how
Mobilelearner said:
Which browser you are using. May be your Internet provider has done some firewall setting for http and www. Unlock mobile will not solve your problem.
You can get unlock code from imei number. You can install custom os of unlocked version.
Click to expand...
Click to collapse
how can i find unlocked firmware for e5577cs-321 21.328.62.00.401 ?

Hello, I've been trying to upgrade my Huawei E5577Cs-321 mifi firmware and I think I messed up somewhere and now I'm stuck on the Huawei boot logo. When first inserted in dc-unlockers, this is what I get;
Found Applications port COM12
Found modem : E5577Cs-321
Model : Huawei AuthVer 4 modem (New)
IMEI : 860783033917113
Serial NR. : D2LDU16512001902
Firmware : 21.180.99.04.00
Compile date / time : Jun 12 2015 19:09:24
Hardware ver. : CL1E5573SM11
Dashboard version : WEBUI_17.100.11.00.03_MRE5
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)
Can someone please help me out.

i had a problem i dont know how to openline this unit can somebody help me to unlock for free is been 4 year the huawie e5577 cs321 v. 21.328.62.01.397 and i dont know how??