I was checking out the builtin LCDTEST application which can be invoked by dialing the code *#0*# . I did some random tests using the app and a PASS message would be shown if successful. But not until I did the SensorHub test. Each time I do this test, the result is displayed as FAILED. Additionally following details are shown :
INT CHECK : NG
FIRMWARECHECK
MCU FIRM VERSION : AT0112111600
BIN FIRM VERSION : AT0112111600
MCU name: AT32UC3L0128
I decided to run all the test to see if any other tests would FAIL. And unfortunately, the MAGNETIC Sensor test too FAILED.
What might be the cause of this ? Does it happen because my phone is faulty ? HELP
NB : Mine is the international variant of Galaxy Note 2 (GT N7100) running the latest 4.1.2 JB .
INT CHECK : NG
FIRMWARECHECK
MCU FIRM VERSION : AT0112123109
BIN FIRM VERSION : AT0112123109
MCU name: AT32UC3L0128 fail
i'm from morocco i purchased a samsung galaxy s4 mini model GT-I9195 as a brand new phone, and i want to upgrade it to 4.4.2, it has some spanish vodafone app pre installed on it !! i don't know if it's unlocked or not but it works on my sim card (meditel)................and i have some questions and guide to make this upgrade be successful with no problem
what is the official 4.4.2 firmware that i have to use from sammobile, it should by tgy or atl or anything else because i can't fine my country in the list, is this will be an issue if i choose a different one like french firmware,
and if i upgrade it do i have to unlock it after upgrade ?
some additional informations :
CSC info :
original csc code : TGY
firmware's csc code : ATL
active csc code : TGY / ATL
csc country : spain
csc country iso : ES
firmware info
bootloader version : I9195XXUBNA2
baseband version : I9195XXUBNA2
PDA version : I9195XXUBNA2
csc version : I9151ATLBNA2
device type : serranolte
product name : serranoltexx
country of origine : made in vietnam
manufacturing date : none
knox warranty void : 0x0
I got this model after i reset counter and tried all of codes available but not working. . Am i missing something ?? Plz help me ....
Found modem : E5577s-321
Model : Huawei AuthVer 4 modem (New)
IMEI : 867262020602254
Serial NR. : F5D7N15527005214
Firmware : 21.316.01.00.00
Dashboard version : WEBUI_17.100.13.01.03_MRE5
Web UI version : WEBUI_17.100.13.01.03_MRE5
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 2 (unlock attempts left : 8)
Sent from my iPhone using Tapatalk
Hey,
I have been using a Huawei E5577Cs-321 Viva which was unlocked when I got it. My software version is 21.329.01.00.00. Web UI version 17.100.11.08.397. I am having problems when using it, it seems certain sites trigger the router login page. When I enter for example yahoo.com without (https://www.) the router login page seems to open instead. It also happens when I use only www.(some websites).com. I figured it out that it has something to do with security, since when I use https://www.(some website).com it works. The funny thing is most sites seem to work ok, but this is a huge pain and also you can't always do this for weblinks or web redirects. Is there a solution? I've reset the router, used multiple browsers and different phones and laptops and it continues to happen.
I have the following text in DC unlocker
DC - Unlocker 2 Client 1.00.1277
Detecting modem :
selection :
manufacturer - Huawei modems
model - Auto detect (recommended)
Found Applications port COM17
Found modem : E5577Cs-321
Model : Huawei E5577 (untested)
IMEI : 864695039897667
Serial NR. : D2LDW18525001727
Firmware : 21.329.01.00.00
Dashboard version : WEBUI_17.100.11.08.397_MRE5
Web UI version : WEBUI_17.100.11.08.397_MRE5
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)
Can I downgrade without the modem locking? If so which softwae should I try? Right now it is V4 unlocked but, I was hoping if I can change the software it might work.
Solved. Router was downgraded to v. 21.328.62.01.397 and new Web Ui was installed. The router login redirects aren't happening as much as before.
Nobody has found a solution for this yet?
next4nextel said:
Solved. Router was downgraded to v. 21.328.62.01.397 and new Web Ui was installed. The router login redirects aren't happening as much as before.
Click to expand...
Click to collapse
Please help me on how to network unlock the e5577cs-321 ? software version 21.319.01.00.1387.
thank you.
Fixed It ...
I had The same Problem and it was because all the webui missing the dashboard quiq setup so it keep triggering the quiq set up page insted of some websites , i fixed it using T-Mobile webui wich will launch the setup page once and then it will work normally and her it is ...
3---E5577Cs-321_Update_WEBUI_17.100.20.00.709rd.exe
drive.google.com
Mhmd954 said:
Fixed It ...
I had The same Problem and it was because all the webui missing the dashboard quiq setup so it keep triggering the quiq set up page insted of some websites , i fixed it using T-Mobile webui wich will launch the setup page once and then it will work normally and her it is ...
3---E5577Cs-321_Update_WEBUI_17.100.20.00.709rd.exe
drive.google.com
Click to expand...
Click to collapse
Thanks brother, I was away for a while and did not see your post. I had successfully done the same with a T-mobile webui also around 6 months ago, it was a Russian or Eastern European, maybe Romanian T-mobile webui. This T-mobile webui stopped the redirects but it blocked a lot of sites, some social media, torrents and even regular sites, so I removed it. I then installed a generic webui and it was working fine until a few weeks ago and it started acting up again. Due to covid there hasn't been much work, so I haven't been buying data and using the 4g at all. Is your webui the same T-mobile one or a different one? Also does your device work in 3G? My device will only work on 4G or LTE. On 3G it will connect but will not load any pages, very low KB transfer rate less than 50KB/sec. I've tried different sims but it won't work in 3G. Can you send me the version # of your dashboard and firmware so I can confirm or not?
macTech007 said:
Please help me on how to network unlock the e5577cs-321 ? software version 21.319.01.00.1387.
thank you.
Click to expand...
Click to collapse
Sorry late reply, try this. Read whole thing carefully before trying. See if you can calculate the nck code without wiping your NVram. Meaning use only the usbsafe loader or the oem-nck_e5573b.bin loader.
Unlock Huawei Modems and Routers Free
If you have an Huawei Dongle and Router that needs unlock code, flash code, hash code etc you can get generate the codes yourself from the following links. 1. Huawei Modems (Old Algo most IMEI starts with 35-) V1 - Huawei Unlock Code Calculator...
forum.xda-developers.com
Which browser you are using. May be your Internet provider has done some firewall setting for http and www. Unlock mobile will not solve your problem.
You can get unlock code from imei number. You can install custom os of unlocked version.
how
Mobilelearner said:
Which browser you are using. May be your Internet provider has done some firewall setting for http and www. Unlock mobile will not solve your problem.
You can get unlock code from imei number. You can install custom os of unlocked version.
Click to expand...
Click to collapse
how can i find unlocked firmware for e5577cs-321 21.328.62.00.401 ?
Hello, I've been trying to upgrade my Huawei E5577Cs-321 mifi firmware and I think I messed up somewhere and now I'm stuck on the Huawei boot logo. When first inserted in dc-unlockers, this is what I get;
Found Applications port COM12
Found modem : E5577Cs-321
Model : Huawei AuthVer 4 modem (New)
IMEI : 860783033917113
Serial NR. : D2LDU16512001902
Firmware : 21.180.99.04.00
Compile date / time : Jun 12 2015 19:09:24
Hardware ver. : CL1E5573SM11
Dashboard version : WEBUI_17.100.11.00.03_MRE5
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)
Can someone please help me out.
i had a problem i dont know how to openline this unit can somebody help me to unlock for free is been 4 year the huawie e5577 cs321 v. 21.328.62.01.397 and i dont know how??
Hi,
A short story about a cheated friend with a baby at the end. Im findig solutions for her.
Could anyone please advise if and possibly how to unlock S20+ SM-G985F locked to Spain Movistar (XEC)?
Just making calls with a Czech SIM is enough.
From what I've browsed the information the code to unlock the SIM may not work with this operator and it's not out of her sight.
After restarting the phone from CZ SIM o2 phone does not want the code to unlock operator lock.
If I understand correctly, changing the ROM will not help. And I can't possibly put in any but some matching CSC or CSC change.
I have tried SAMkey but according to the description it will not unlock this tel. Or does it?
The log from SAMkey is below:
Loading ADB module............OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : R58N13*
Model Name : SM-G985F
Device CodeName : Y2S
Hardware : EXYNOS990 EXYNOS990
Modem Board : SHANNON5123
HW Version : REV0.5
BL version : G985FXXSFGWA7
AP version : G985FXXSFGWA7
CP version : G985FXXUFGVL5,G985FXXUFGVL5
CSC version : G985FOXMFGVL5
Android version : 13
Build date : Fri Jan 6 19:02:18 KST 2023
Country : Spain
IMEI : 3578776433*
Serial Number : R58N13*
Carrier : XEC
SIM State : LOADED,ABSENT
Debug Level : 0x4f4c
CP Debug Level : N/A
Warranty VOID : 1
SIM operator : O2 Family, [23002,]
USB Settings : MTP,CONN_GADGET,ADB
Short story.
Friend of mine with a small child bought a second-hand mobile phone with money saved from her maternity leave and without consulting me. Unfortunately, the person in question was a scammer and sold her an S20+ locked to the Spanish operator Movistar (XEC), which I only found out later. He assured her that it would work for her in CZECH.
I'm trying to deal with the return, but I would like to find a solution for sure that she will be able to use it if we don't catch up with the scammer. I'll catch up anyway and turn it over to the police, but I need to help this friend's mom.
Thank you very much for your help and directions.
Tom