All modems (radio / baseband) here are for the T-Mobile M919 I9505 variant only!!
i've seen quite a few people around the threads looking for just modems so figured i'd share. i'll try to keep the thread up to date as our new firmwares release. i'll look into making CWM for those that may want it to be flashable but for now
please follow these instructions
with Odin:
Extract the contents of 7zip/zip archive. Put it in your Odin folder. Do not try to extract files from the .tar.md5.
Run Odin 3.07.exe, and prepare Odin:
1. Check "auto-reboot", and uncheck all other options.
2. Click Phone and select the TAR.md5 you downloaded. Leave other fields empty.
3. Don't panic. Odin may freeze while it checks the MD5 signature of the TAR. This is normal.
* Put your device into Download Mode:
5. Power down fully and disconnect the USB cable.
6. Hold Volume Down + Home + Power.
7. You should now be at Download Mode. Connect your device and wait for it to be recognized.
8. Click Start in Odin.
9. Wait!
10. Device will auto reboot
UVUAMDL Baseband - 05.07.2013
This should be stickied
Sent from my SGH-T999 using xda app-developers app
Can someone make is twrp flashable?
Lolento said:
Can someone make is twrp flashable?
Click to expand...
Click to collapse
it's a two part file so i'm not sure that's possible yet. i'll have to look into it tmw when i have time. if anyone else knows how to, i'll def add it to the OP.
xXchrizhurtyXx said:
This should be stickied
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Ditto!
Sent from my Nexus 7 using xda premium
Thank you mrvirginia. I just did this and it worked just fine.
Wicked ROM v1
Pinan said:
Thank you mrvirginia. I just did this and it worked just fine.
Wicked ROM v1
Click to expand...
Click to collapse
np :silly:
It'll be awesome if it can be flashed through TWRP or CWM.
With this (and possibly a kernel flash), we can now run any on the international i9505 ROMs, right?
Seems like i9505 have the solution to flash through recovery.
http://forum.xda-developers.com/showthread.php?t=2192025
Maybe we would get it soon? ;p
I've tried to Odin mdl but it stays at mdb
Sent from my SGH-M919 using xda app-developers app
mrvirginia said:
np
Click to expand...
Click to collapse
Can we get the MDB radio as well? Would be good to have to experiment with. I found some dead areas, that I did not notice were dead before I changed to MDL.
xXchrizhurtyXx said:
I've tried to Odin mdl but it stays at mdb
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Same
xXchrizhurtyXx said:
I've tried to Odin mdl but it stays at mdb
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
BDHela said:
Same
Click to expand...
Click to collapse
make sure you are selecting Phone and not PDA. confirmed working by numerous people.
Pinan said:
Can we get the MDB radio as well? Would be good to have to experiment with. I found some dead areas, that I did not notice were dead before I changed to MDL.
Click to expand...
Click to collapse
if you can pull it. i don't have those files on hand. i may get them tmw.
mrvirginia said:
make sure you are selecting Phone and not PDA. confirmed working by numerous people.
if you can pull it. i don't have those files on hand. i may get them tmw.
Click to expand...
Click to collapse
I did that sir. Still saying MDB in about. Sorry
Running Wicked 2
nitrogen618 said:
Seems like i9505 have the solution to flash through recovery.
http://forum.xda-developers.com/showthread.php?t=2192025
Maybe we would get it soon? ;p
Click to expand...
Click to collapse
this is a one part modem.bin. the Odin file in OP is a two-part modem, modem.bin and NON-HLOS.bin. i'm fairly certain we need both parts and am not sure how that works via CWM. i can make one with both parts flashed to the modem location, but can't guarantee what that would do if anything...
BDHela said:
I did that sir. Still saying MDB in about. Sorry
Running Wicked 2
Click to expand...
Click to collapse
not sure what to tell you, mate.
BDHela said:
I did that sir. Still saying MDB in about. Sorry
Running Wicked 2
Click to expand...
Click to collapse
I did the same, Odin to phone and it says MDB but Odin reported 1 successful and 0 failed. Isn't there two files though?
MD5 checked out so I know all of that is solid it wasn't a bad download, maybe it's a glitch or something.
Orical said:
I did the same, Odin to phone and it says MDB but Odin reported 1 successful and 0 failed. Isn't there two files though?
MD5 checked out so I know all of that is solid it wasn't a bad download, maybe it's a glitch or something.
Click to expand...
Click to collapse
yes, two files but it will always say 1 successful. says same when you flash an entire stock image which includes quite a few files (imgs).
mrvirginia said:
yes, two files but it will stay say 1 successful. says same when you flash an entire stock image which includes quite a few files (imgs).
Click to expand...
Click to collapse
I saw the other file you listed in the scroll report while flashing but it never said it errored at all just listed then completed the reboot, meh maybe it's just one of those things it's hit or miss depending on the device.
Related
What all needs to be used to flash the EC05 tar file from Mammon in ODIN? What settings need to be checked? Do we need to put in the victory_8G pit file and the EC05 tar file? Any help with this would be great! Thanks in advance!
The only option checked should be auto reboot. Yes you do need to use the .pit file, and the modem.tar file should go in the phone slot. Good luck. Im using it, its working fine.
spitefulrain said:
The only option checked should be auto reboot. Yes you do need to use the .pit file, and the modem.tar file should go in the phone slot. Good luck. Im using it, its working fine.
Click to expand...
Click to collapse
That's what I thought, confirmation is everything! Thank you very much!
spitefulrain said:
The only option checked should be auto reboot. Yes you do need to use the .pit file, and the modem.tar file should go in the phone slot. Good luck. Im using it, its working fine.
Click to expand...
Click to collapse
OK so do this and there will be no data loss (I know, backup always) then flash the new ROM over the old right?
Don't know what is going on in the DEV section. Seems to be a war or something. And Bonsai thread keeps getting closed.
kennyglass123 said:
OK so do this and there will be no data loss (I know, backup always) then flash the new ROM over the old right?
Don't know what is going on in the DEV section. Seems to be a war or something. And Bonsai thread keeps getting closed.
Click to expand...
Click to collapse
Yup, I did a nand backup and flashed the EC05 modem through ODIN and it rebooted back into the VIPERrom 5.0 and everything worked alright. I wiped 3X and installed Bonsai 4.0. Works fine.
jerbeck24 said:
Yup, I did a nand backup and flashed the EC05 modem through ODIN and it rebooted back into the VIPERrom 5.0 and everything worked alright. I wiped 3X and installed Bonsai 4.0. Works fine.
Click to expand...
Click to collapse
Cool. Thanks. I assume I can flash Bonsai 4 right over 3.0.1 since they have been including the wipes in the flash. Can't ask anyone since their thread keeps getting locked.
Sent from my SPH-D700 using XDA App
kennyglass123 said:
Cool. Thanks. I assume I can flash Bonsai 4 right over 3.0.1 since they have been including the wipes in the flash. Can't ask anyone since their thread keeps getting locked.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Where did you get the .pit file?
nixo31 said:
Where did you get the .pit file?
Click to expand...
Click to collapse
Pit file came with the Odin 1.6 download. The tar file came from Bonsai. Thread is closed but links are active.
Sent from my SPH-D700 using XDA App
you dont have to wipe
Well i have the EB13 pit file...can i just use this one? Or is there one specifically for EC05???
Anyone know if there is going to be a .tar file at midnight?? or is the .bin file the same thing???
qbking77 said:
Anyone know if there is going to be a .tar file at midnight?? or is the .bin file the same thing???
Click to expand...
Click to collapse
its already out!
Where can I find the .tar file??
Sent from my SPH-D700 using XDA App
qbking77 said:
Where can I find the .tar file??
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Look in the page before last in Bonsai 4.0.0 thread its closed but the link is up...u will have to sign up to download
Are you using eb13-ext4.pit file or another with the odin?
apatcas said:
Are you using eb13-ext4.pit file or another with the odin?
Click to expand...
Click to collapse
I just used the same EB13-ext4.pit and it was flawless. Only problem was i forgot i had to be in download mode lol
Who hasn't done that? lol
nixo31 said:
Look in the page before last in Bonsai 4.0.0 thread its closed but the link is up...u will have to sign up to download
Click to expand...
Click to collapse
I don't see a link it has been removed.
http://forum.xda-developers.com/showthread.php?t=1001469
or is this the wrong thread
This is removed too http://forum.xda-developers.com/showthread.php?t=976864
Can someone PM me his link please?
I'm thinking of going purely stock for a bit...
Edit: Thanks to both you guys, you know who you are. Don't know if y'all want me to publicly say who lol
spitefulrain said:
The only option checked should be auto reboot. Yes you do need to use the .pit file, and the modem.tar file should go in the phone slot. Good luck. Im using it, its working fine.
Click to expand...
Click to collapse
Thanks, I only wanted the modem for now and never used odin. I always felt odin was a last resort if cwm ever failed to restore a nandroid, still never wanted to use it. Anyhow I still screwed up by putting the tar file under pda instead of phone, but thankfully it didn't matter....as I wipe the sweat beads off my forehead. :-D
If you flash a tar file it goes under PDA. .bin goes in phone. You did it right.
Sent From My Evo Killer!
100% factory. Pulled straight from Samsung's servers and decrypted for your flashing pleasure.
http://www.4shared.com/zip/rM9GGS0X/SGH-T989_TMB_1_20120608172207_.html
http://uploading.com/files/4ed8d4md/SGH-T989_TMB_1_20120608172207_ugy1nehf4g.zip/
.zip
CRC32: A3A8BBC9
MD5: B6DD110BD2F6CF6AB6DFC0D834439B65
SHA-1: F4F25A4B14710D944841D1FDBD6B91449526C845
.tar.md5
CRC32: 686A2AF6
MD5: A203B403B26C8790F7080407524FC80A
SHA-1: 08B9F647CA87EA44DC8FCAEFABA5471B420004F6
Unzip and put file into PDA in ODIN and flash away! If you need ODIN, it is attached below.
*WARNING* DO NOT CHECK RE-PARTITION OR ANYTHING ELSE. ONLY AUTO-REBOOT AND F. RESET TIMER SHOULD BE CHECKED.
If you need more information about this file and what it is/what to do with it, read the stickies at the top of this forum to learn more about ODIN and what it is used for. This file is provided mostly for people who like me who prefer to odin a stock rom and tweak it themselves. It will also prove INVALUABLE from here on out for when you need to unroot your phone (send into t-mobile/samsung, just want it un-rooted).
IF YOU WANT ROOT:
I also attached the latest superuser and CWM recovery for those who want to root.
Put the recovery.tar in the pda slot and flash for CWM recovery.
Then install the attached superuser inside CWM recovery to have full root!
FYI: It's a known issue that superuser usually does not "stick" on the first try. This is with ANY ROM for our phones. Just keep flashing it (usually 2 to 3 times)until it says installation complete.
THIS WILL NOT AFFECT YOUR DOWNLOAD/FLASH COUNTER (+)
Will this work in clockworkmod recovery?
Robca79 said:
Will this work in clockworkmod recovery?
Click to expand...
Click to collapse
NO, it clearly says ODIN on top.
Mr. X is making the flashable zip.
Powered by the SGSII
Nope i believe Mr. X is making that as we speak. This is for a full ODIN flash.
rooted?
Can't wait for your link, can I use CWM to flash? Is the firmware already rooted or
factory fresh one?
Wow you guys...just wow...
Sent from my SGH-T989 using xda premium
Will be factory fresh. Will be like any other stock rom, not rooted. Root it via odin like we have always done for all of our roms. I think it's best to just leave completely intact so we always have an option to get our phones back to 100% factory. The CW flashable zips and rooted custom roms are on their way.
You should've seen this coming dude ! Lol
Sent from my iPad using Tapatalk HD
No dummies use Odin to flash through recovery. Only us tt flashable zip packz from tbe man himself. sheesh....when will yall learn
Sent from my SGH-T989 using xda premium
When you post a less than informative OP it's bound to generate questions.
Can the radio be pulled from this update?
Sent from my SGH-T989D using Tapatalk 2
rsfaze said:
When you post a less than informative OP it's bound to generate questions.
Click to expand...
Click to collapse
Lol what's questionable? It says it's for Odin right in the title. And Odin files are ALWAYS 100% stock
Sent from my SGH-T989 using xda premium
rsfaze said:
When you post a less than informative OP it's bound to generate questions.
Click to expand...
Click to collapse
An odin file is just that: an odin file. No offense if you knew what an ODIN file was you wouldn't be asking.
Whenever the upload finishes in 15 minutes or so, i will make a short description to go with it.
Towle said:
Lol what's questionable? It says it's for Odin right in the title. And Odin files are ALWAYS 100% stock
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thank You ! I was just gonna say the same the exact same thing ! Lol
Hi All!
Trying to get an answer, I am on [ROM][ICS 4.0.4]x :ARKSIDE.UCLE2:: x[BETA07.1][6.04.2012] right now, with this fine community getting ready to drop this without having to use Kies, I keep hearing about UVLDE firmware and needing to flash before flashing the new one TMobile just released (ICS). If I am already on ICS do I still need to flash UVLDE? thanks for the guidance O'h wise ones
slice2011 said:
Hi All!
Trying to get an answer, I am on [ROM][ICS 4.0.4]x :ARKSIDE.UCLE2:: x[BETA07.1][6.04.2012] right now, with this fine community getting ready to drop this without having to use Kies, I keep hearing about UVLDE firmware and needing to flash before flashing the new one TMobile just released (ICS). If I am already on ICS do I still need to flash UVLDE? thanks for the guidance O'h wise ones
Click to expand...
Click to collapse
Nope, just wait for someone to post a zip and you can flash it.
Sent from my SGH-T989 using xda premium
defvayne said:
Can the radio be pulled from this update?
Sent from my SGH-T989D using Tapatalk 2
Click to expand...
Click to collapse
Radio is up in general section in ics thread
Sent from my SGH-T989 using XDA
Towle said:
Nope, just wait for someone to post a zip and you can flash it.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Appreciate the prompt response and answer, much appreciated!
So no go on this ODIN one?
slice2011 said:
Appreciate the prompt response and answer, much appreciated!
So no go on this ODIN one?
Click to expand...
Click to collapse
Flash this via Odin only if you want an UN-rooted TMO ics. Wait for zipped ones as they will be rooted.
does anyone have the .pit file for the t-mobile note 2, or is it the same as the one for the international version... can i have a link?
Here you go.
http://forum.xda-developers.com/showthread.php?p=48417514
Sent from my SGH-T889 using xda app-developers app
ciphercodes said:
Here you go.
http://forum.xda-developers.com/showthread.php?p=48417514
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Thanks! My phone currently can only boot in download mode and recovery mode as I flashed the international version firmware into this... And each time I try flashing I get the nand error... So I will have to use the .pit file right? Thanks again!
Sent from my Nexus 5 using xda app-developers app
mlndshh said:
Thanks! My phone currently can only boot in download mode and recovery mode as I flashed the international version firmware into this... And each time I try flashing I get the nand error... So I will have to use the .pit file right? Thanks again!
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Is flashing stuck at Nand Write ?
Pit files should only be used as a last resort, I highly advise NOT to use them if you are not 100% certain of what it is going to do.
Did you already rule out the following items?
- USB cable is not an issue, USB Drivers are fine, USB debugging is turned on and KIES is not running
- Flashing the correct ROM
- Different versions of ODIN
ciphercodes said:
Is flashing stuck at Nand Write ?
Pit files should only be used as a last resort, I highly advise NOT to use them if you are not 100% certain of what it is going to do.
Did you already rule out the following items?
- USB cable is not an issue, USB Drivers are fine, USB debugging is turned on and KIES is not runnig
- Flashing the correct ROM
- Different versions if ODIN
Click to expand...
Click to collapse
yes it is stuck on NAND write...however i will try flashing the rom meant fot t889 first... what if that fails? using the .pit file would be the only option right? thanks!
EDIT: It flashes perfectly after i flashed with the t889 image...Thanks for your help! sorry didn't try this before as i was still downloading it.
mlndshh said:
yes it is stuck on NAND write...however i will try flashing the rom meant fot t889 first... what if that fails? using the .pit file would be the only option right? thanks!
EDIT: It flashes perfectly after i flashed with the t889 image...Thanks for your help! sorry didn't try this before as i was still downloading it.
Click to expand...
Click to collapse
Glad to know it worked without having to go through pit files.
ciphercodes said:
Glad to know it worked without having to go through pit files.
Click to expand...
Click to collapse
Thanks Again! I have a problem though...this was present before as well, so after flashing this and prior to this, there were network problems i.e the network continuously changes... sometimes on 1 bar sometimes 3 sometimes none...I live in India and don't use a t-mobile sim card if that helps.
mlndshh said:
Thanks Again! I have a problem though...this was present before as well, so after flashing this and prior to this, there were network problems i.e the network continuously changes... sometimes on 1 bar sometimes 3 sometimes none...I live in India and don't use a t-mobile sim card if that helps.
Click to expand...
Click to collapse
This is common if the phone is an area where network is spotty. This is most likely an issue with the network and not the phone.
ciphercodes said:
This is common if the phone is an area where network is spotty. This is most likely an issue with the network and not the phone.
Click to expand...
Click to collapse
Nope it happens everywhere... it seems like a hardware problem as i can't make any calls as well :-/
mlndshh said:
Nope it happens everywhere... it seems like a hardware problem as i can't make any calls as well :-/
Click to expand...
Click to collapse
Did it ever worked with any non-tmobile sim ?
Do you see your IMEI under settings->about device->status ?
This, for the most part, is not my work. What this is is @DocHoliday77 's port of the sprint SGS3 4.4.2 ROM, which I have repackaged into an Odin .tar.md5; the point being for those who would rather flash this via ODIN instead of twrp/cwm.
You can thank DocHoliday77 for his hard work here, all I did was edit the build.prop and repackage with multiboot. Download link below.
Included in this .tar.md5:
-System image, with build.prop edited to accurately reflect our device.
-multiboot 2.12 recovery image (for those who don't know, it's TWRP 2.7 with the added ability to boot other ROMs in a sandbox)
-KT747 boot image, which is included with the original port flashable zip.
YOU MUST HAVE AN OFFICIAL 4.3 BOOTLOADER / MODEM INSTALLED. THERE IS NO WAY TO CIRCUMVENT THIS.
Download: Stock rooted 4.4.2 TW
Nice
First too. Didn't even realize
Sent from my SGH-I317 using Tapatalk
Thanks:laugh:
Not going to need this but great work man!
Choice for a flash able zip?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Duffman14 said:
Choice for a flash able zip?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There already is one here
http://forum.xda-developers.com/showthread.php?t=2749495
talkingmonkeys said:
There already is one here
http://forum.xda-developers.com/showthread.php?t=2749495
Click to expand...
Click to collapse
Ty sir
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
You're all quite welcome. I may reupload sometime soon with boot loader / modem included to make it easier for people. (There would be two different versions, one with the at&t modem and one with the bell/telus/rogers one)
Can anyone confirm whether or not this is a daily driver?
n_alvarez2007 said:
Can anyone confirm whether or not this is a daily driver?
Click to expand...
Click to collapse
Aside from not being able to send MMS with WiFi on (SMS works fine) this should be fully capable of being a DD.
Use Handcent messaging app, set it as default and mms while Wi-Fi is active will work
Restl3ss said:
This, for the most part, is not my work. What this is is @DocHoliday77 's port of the sprint SGS3 4.4.2 ROM, which I have repackaged into an Odin .tar.md5; the point being for those who would rather flash this via ODIN instead of twrp/cwm.
You can thank DocHoliday77 for his hard work here, all I did was edit the build.prop and repackage with multiboot. Download link below.
Included in this .tar.md5:
-System image, with build.prop edited to accurately reflect our device.
-multiboot 2.12 recovery image (for those who don't know, it's TWRP 2.7 with the added ability to boot other ROMs in a sandbox)
-KT747 boot image, which is included with the original port flashable zip.
YOU MUST HAVE AN OFFICIAL 4.3 BOOTLOADER / MODEM INSTALLED. THERE IS NO WAY TO CIRCUMVENT THIS.
Download: Stock rooted 4.4.2 TW
Click to expand...
Click to collapse
I cant seem to get this to flash with odin..... STOCK_ROOTED_4.4.2_TW_I747.tar.md5 is invalid
Can I install on i747m like this?
Sent from my SGH-I747M using XDA Premium 4 mobile app
Confirmed, this is not working at the moment. The system image is broken and I'm not sure why, bear with me
chivas1311 said:
Can I install on i747m like this?
Sent from my SGH-I747M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not sure as I cant read your language, sorry. But one part says its LI1 and another says ND3. First, the bootloader/firmware version MUST be a 4.3 build.
Second, what is the ND3? Is that some sort of test build? Or did I miss something somewhere?
Restl3ss said:
Confirmed, this is not working at the moment. The system image is broken and I'm not sure why, bear with me
Click to expand...
Click to collapse
Does it fail at the md5 check?
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Not sure as I cant read your language, sorry. But one part says its LI1 and another says ND3. First, the bootloader/firmware version MUST be a 4.3 build.
Second, what is the ND3? Is that some sort of test build? Or did I miss something somewhere?
Does it fail at the md5 check?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
It does yeah, but I tried it without the md5sum and it failed as well, just after nand write start. On the download here the md5 check fails because the binary is supposedly invalid.
The system image was made by running mkfs-yaffs2-x86 on the system folder from the original port zip, running unyaffs does unpack it, but something is definitely not right with this image, I tried using unpack-ext4 on windows which usually works on odin system images but it didn't on this one.
Making an odin flashable isnt a straight forward process for the S3 it seems. MrRobinson is the only one I know of off hand that has an effective process to do so. He only gives clues to his process in his op. Ive done one a long time ago, but I think what I had to do was take tar the system.img dumped directly from the device using the dd command.
If I remember right, it had to be done immediately after flashing, been too long though so I cant remember for certain.
So if I am recalling it correctly, flash the rom, factory reset, then while still in recovery, using either adb or the built in terminal emulator, use dd to dump the image to your sd card.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Not sure as I cant read your language, sorry. But one part says its LI1 and another says ND3. First, the bootloader/firmware version MUST be a 4.3 build.
Second, what is the ND3? Is that some sort of test build? Or did I miss something somewhere?
Does it fail at the md5 check?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
It's a Stock 4.3 bulid from Telcel, Mexico, in SamMobile says this:
In english:
Ok, thanks for the clarification on that. Once its confirmed working, you should be able to flash it just fine. If that baseband is not 4.3 though, you will likely have to update it as well.
For now though, you can always just flash the rom this was built from. Should get you exactly the same thing, only the method is different.
Sent from my SGH-T999 using Tapatalk
So I used the switch app while rooted to do an emergency recovery and it failed. Then tried Odin and it failed every time. Used Odin 3.10.7 with latest tar. Am I screwed? Stuck in either download mode or error updating software screen
Try Odin 3.10.6
Tried it as well. Is there a specific tar you'd recommend? Do you have a link?
Sent from my HTCONE using XDA Free mobile app
bleichtman said:
Tried it as well. Is there a specific tar you'd recommend? Do you have a link?
Sent from my HTCONE using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/sprint-galaxy-s6/general/oi1-available-sammobile-t3218882
I am sure that you know this, but make sure that the MD5 matches. I always use this: http://www.winmd5.com/
koop1955 said:
http://forum.xda-developers.com/sprint-galaxy-s6/general/oi1-available-sammobile-t3218882
I am sure that you know this, but make sure that the MD5 matches. I always use this: http://www.winmd5.com/
Click to expand...
Click to collapse
Just downloaded this. Will try it a bit later. Would the earlier tar files not work because I was on latest firmware? Would you recommend odin .6 or .7?
Sent from my HTCONE using XDA Free mobile app
bleichtman said:
Just downloaded this. Will try it a bit later. Would the earlier tar files not work because I was on latest firmware? Would you recommend odin .6 or .7?
Sent from my HTCONE using XDA Free mobile app
Click to expand...
Click to collapse
A difference in the firmware version could account for the problem. You can go up, but not down.
I don't think that the ODIN version is going to matter, but I used .6. Go with that just to be safe.
koop1955 said:
A difference in the firmware version could account for the problem. You can go up, but not down.
I don't think that the ODIN version is going to matter, but I used .6. Go with that just to be safe.
Click to expand...
Click to collapse
I just checked the MD5 and it came back with:
627cf026d0d57b927c2d55ea7ebe35ce
How do I know if this is correct. The odin fails about 3/4 the way through.
bleichtman said:
I just checked the MD5 and it came back with:
627cf026d0d57b927c2d55ea7ebe35ce
How do I know if this is correct. The odin fails about 3/4 the way through.
Click to expand...
Click to collapse
Look at my posted link. I have the MD5 there: MD5 ff538bc518bb98dd9cb444793e7b8b25
Difference in MD5 indicates something has gone wrong in the downlaod.
Ok. I'll redownload. Thanks for all your help
Sent from my HTCONE using XDA Free mobile app
koop1955 said:
Look at my posted link. I have the MD5 there: MD5 ff538bc518bb98dd9cb444793e7b8b25
Difference in MD5 indicates something has gone wrong in the downlaod.
Click to expand...
Click to collapse
Ive tried to download numerous times and cannot get the correct MD5
bleichtman said:
Ive tried to download numerous times and cannot get the correct MD5
Click to expand...
Click to collapse
Hmm, never ran into this before. I have one more thing for you to try.
Grab the latest firmware from Sammobile: http://www.sammobile.com/firmwares/database/SM-G920P/
Be warned, it is slow...really slow. But let her go until done and see if that works.
ok, so progress I think. It finally passed, but now it goes from the Samsung start screen to the blue screen with white android and back again (boot looping) Odined twice and same situation
Boot recovery and wipe data should take care of your issue
w.working said:
Boot recovery and wipe data should take care of your issue
Click to expand...
Click to collapse
I had a similar issue as OP, except I can't boot into recovery no matter how long I hold down the damn buttons. Ideas? I flashed the tar a few times already