What all needs to be used to flash the EC05 tar file from Mammon in ODIN? What settings need to be checked? Do we need to put in the victory_8G pit file and the EC05 tar file? Any help with this would be great! Thanks in advance!
The only option checked should be auto reboot. Yes you do need to use the .pit file, and the modem.tar file should go in the phone slot. Good luck. Im using it, its working fine.
spitefulrain said:
The only option checked should be auto reboot. Yes you do need to use the .pit file, and the modem.tar file should go in the phone slot. Good luck. Im using it, its working fine.
Click to expand...
Click to collapse
That's what I thought, confirmation is everything! Thank you very much!
spitefulrain said:
The only option checked should be auto reboot. Yes you do need to use the .pit file, and the modem.tar file should go in the phone slot. Good luck. Im using it, its working fine.
Click to expand...
Click to collapse
OK so do this and there will be no data loss (I know, backup always) then flash the new ROM over the old right?
Don't know what is going on in the DEV section. Seems to be a war or something. And Bonsai thread keeps getting closed.
kennyglass123 said:
OK so do this and there will be no data loss (I know, backup always) then flash the new ROM over the old right?
Don't know what is going on in the DEV section. Seems to be a war or something. And Bonsai thread keeps getting closed.
Click to expand...
Click to collapse
Yup, I did a nand backup and flashed the EC05 modem through ODIN and it rebooted back into the VIPERrom 5.0 and everything worked alright. I wiped 3X and installed Bonsai 4.0. Works fine.
jerbeck24 said:
Yup, I did a nand backup and flashed the EC05 modem through ODIN and it rebooted back into the VIPERrom 5.0 and everything worked alright. I wiped 3X and installed Bonsai 4.0. Works fine.
Click to expand...
Click to collapse
Cool. Thanks. I assume I can flash Bonsai 4 right over 3.0.1 since they have been including the wipes in the flash. Can't ask anyone since their thread keeps getting locked.
Sent from my SPH-D700 using XDA App
kennyglass123 said:
Cool. Thanks. I assume I can flash Bonsai 4 right over 3.0.1 since they have been including the wipes in the flash. Can't ask anyone since their thread keeps getting locked.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Where did you get the .pit file?
nixo31 said:
Where did you get the .pit file?
Click to expand...
Click to collapse
Pit file came with the Odin 1.6 download. The tar file came from Bonsai. Thread is closed but links are active.
Sent from my SPH-D700 using XDA App
you dont have to wipe
Well i have the EB13 pit file...can i just use this one? Or is there one specifically for EC05???
Anyone know if there is going to be a .tar file at midnight?? or is the .bin file the same thing???
qbking77 said:
Anyone know if there is going to be a .tar file at midnight?? or is the .bin file the same thing???
Click to expand...
Click to collapse
its already out!
Where can I find the .tar file??
Sent from my SPH-D700 using XDA App
qbking77 said:
Where can I find the .tar file??
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Look in the page before last in Bonsai 4.0.0 thread its closed but the link is up...u will have to sign up to download
Are you using eb13-ext4.pit file or another with the odin?
apatcas said:
Are you using eb13-ext4.pit file or another with the odin?
Click to expand...
Click to collapse
I just used the same EB13-ext4.pit and it was flawless. Only problem was i forgot i had to be in download mode lol
Who hasn't done that? lol
nixo31 said:
Look in the page before last in Bonsai 4.0.0 thread its closed but the link is up...u will have to sign up to download
Click to expand...
Click to collapse
I don't see a link it has been removed.
http://forum.xda-developers.com/showthread.php?t=1001469
or is this the wrong thread
This is removed too http://forum.xda-developers.com/showthread.php?t=976864
Can someone PM me his link please?
I'm thinking of going purely stock for a bit...
Edit: Thanks to both you guys, you know who you are. Don't know if y'all want me to publicly say who lol
spitefulrain said:
The only option checked should be auto reboot. Yes you do need to use the .pit file, and the modem.tar file should go in the phone slot. Good luck. Im using it, its working fine.
Click to expand...
Click to collapse
Thanks, I only wanted the modem for now and never used odin. I always felt odin was a last resort if cwm ever failed to restore a nandroid, still never wanted to use it. Anyhow I still screwed up by putting the tar file under pda instead of phone, but thankfully it didn't matter....as I wipe the sweat beads off my forehead. :-D
If you flash a tar file it goes under PDA. .bin goes in phone. You did it right.
Sent From My Evo Killer!
Related
Well,
i'm just posting this for my friend(abby_nitewolf) since she can't post it from her account because of some limitations of something. i dont know...
Continuum-Community,
I'm not sure if this was posted or if you already had this, but i made an odin file for our 2.2 Froyo update.
http://www.mediafire.com/?9nxa2ui9c327y7m
Yes it has been tested and i have flashed it on 4 Samsung-Continuum and it worked perfectly.
Any questions of concerns just post here or you can pm me.
Thank you Trailblazer and Imnuts for helping with this and thanks again Imnuts for giving us FROYO.
Notes:
People had been asking me questions about this file,like what is it? who are you? whats 7z? odin?
Well this is the reason for adding this extra section.
What's .7z? I thought it was suppose to be a .tar image.....?
Well young one, .7z its a 7zip extension that i used to compress the original file so it can be easily uploaded and downloaded. Just download 7zip and use it to extract the original file.
What's Odin?
Well, ok, not trying to be mean, but if you dont know how to use odin, then you really shouldnt be messing with this file, do some research and then come back to this thread, because you will be using Odin to flash this file onto your phone. Hint:Use the power of google!
Since i'm flashing this onto my phone do i put the file under PHONE?
NOOOOOOOOOOOOOO!!!!!!!!!!!!!!!!!!!!!!!!!!!!! It goes under PDA!!!
I'm confused, who uploaded this, torque240 or abby_nitewolf?
Hmm...does it really matter? well if its really bugging you then abby_nitewolf is the one who provided us with this odin image, and of course IMNUTS gave us the gift of 2.2 FROYO.
abby_nitewolf
Imnutes beat you to it lol
Sent from my SCH-I400 using XDA App
Really? He posted the whole odin package? Sorry....
Sent via Carrier Pigeon
Nope, yours is original, with no mods, and yours has everything
So, thank you very much for your contribution, everyone will be very appreciative,
Sent from my SCH-I400 using XDA Premium App
Thanks and thanks trailblazer for all the help. And everybody please let me know how it goes.
Sent via Carrier Pigeon
Thanks for linking this. It's nice to have the bone-stock Odin image for those who want to use it as a base for building their own rom.
Link has been updated so i wont get my dropbox privileges suspended again
Found out you have to reflash cwm recovery odin image again. no biggie just takes a minute. unless it really bugs you
Other than that its been working, now tested on 7 phones, no problems so far.
I would love your feedback on this please.
Thanks You
Hehe, its name has 69 in it
Oh and thank you NiteWolf for revealing to me that embarresing typo in my signature, LMAO
trailblazer101 said:
Hehe, its name has 69 in it
Oh and thank you NiteWolf for revealing to me that embarresing typo in my signature, LMAO
Click to expand...
Click to collapse
ha ha yup, took me that many tries to finally get it to work
And i liked that typo, ha ha it made me laugh so much, i was like what!!!!!
Whooooooo thank you for the stock Odin file
Sent from my SCH-I400 using XDA Premium App
odin says what?
Do we have to flash the modem ( per imnuts's instructions ), or just this ODIN file?
Modem file is in this odin image. So yes just this
SENT VIA HAMSTERBALL
Thanks Abby.
Ok, so I just re- flash the cwm mod, then your file,then restart.
Do I need to do anything fdom within cwm? Should I do a wipe/factory restore after flashing the mod?
Thats what I did when I flashed imnuts' mod
sgtwebb1 said:
Thanks Abby.
Ok, so I just re- flash the cwm mod, then your file,then restart.
Do I need to do anything fdom within cwm? Should I do a wipe/factory restore after flashing the mod?
Thats what I did when I flashed imnuts' mod
Click to expand...
Click to collapse
1. Flash this odin image
2. reboot
3. turn off then reflash cwm
And after you reflash this odin image, when you reboot it actually formats everything, data. dbdata. cache...etc...
Sweet, I'll get this done this evening.
Dear Abby---
(sorry, I had to.. )
I flashed the rom, IT'S PERFECT.
Many thanks.
I had a bug with the other rom, every time I opened a website, the screen would blink off, and it was driving me bonkers.
This seems to have fixed it.
Everything is working great.
Again, thanks a bunch.
Is the included ROM rooted or deodexed?
Sent from my Continuum on stock Froyo 2.2.2.
all stock/rooted
And yes, its deodexed xP
Sent from my SCH-I400 using xda premium
Hey guys,
So, I ran EH06, and liked it, but I prefer EC05 (more stable). I tried to Odin back, followed the instructions, but for some strange reason the phone is stuck on Gingerbread. Any suggestions/explanations?..
What are the errors/where does Odin stop, what are you trying to flash, what file name?
malcolmXman said:
What are the errors/where does Odin stop, what are you trying to flash, what file name?
Click to expand...
Click to collapse
No errors. Everything's cool when I Odin, everything says "successful", everything goes according to plan. And when the phone reboots, I get back to stock, but still on Gingerbread with the EH06 modem.
Kangaji said:
No errors. Everything's cool when I Odin, everything says "successful", everything goes according to plan. And when the phone reboots, I get back to stock, but still on Gingerbread with the EH06 modem.
Click to expand...
Click to collapse
What are u trying to go back to?
Sent from my MIUI powered Nexus S 4g using XDA Premium App
Esteway.619 said:
What are u trying to go back to?
Sent from my MIUI powered Nexus S 4g using XDA Premium App
Click to expand...
Click to collapse
Just trying to go back to stock EC05 (planning to go to viperrom AFTER going back to stock). I used the files provided by qbking to do so, and it worked once before. But that was when I was on EG22. EH06 seems different...
Kangaji said:
Just trying to go back to stock EC05 (planning to go to viperrom AFTER going back to stock). I used the files provided by qbking to do so, and it worked once before. But that was when I was on EG22. EH06 seems different...
Click to expand...
Click to collapse
Try this. Link:
ReRFS Format Stock ROM EC05 v1.01
flash with cwm then use Odin to flash the ec05 modem
Sent from my MIUI powered Nexus S 4g using XDA Premium App
You must have flashed a tar that did not have the EC05 modem in it. You could get the stock tar here:
http://forum.xda-developers.com/showthread.php?t=1052813
kennyglass123 said:
You must have flashed a tar that did not have the EC05 modem in it. You could get the stock tar here:
http://forum.xda-developers.com/showthread.php?t=1052813
Click to expand...
Click to collapse
Nope, that's actually exactly the same .tar I used. From the same page.
Kangaji said:
Nope, that's actually exactly the same .tar I used. From the same page.
Click to expand...
Click to collapse
That's a little freaky. Go to the 2nd post of that thread and use Heimdall and you can just do the modem.bin from the EC05 tar or anywhere else you can get it from.
kennyglass123 said:
That's a little freaky. Go to the 2nd post of that thread and use Heimdall and you can just do the modem.bin from the EC05 tar or anywhere else you can get it from.
Click to expand...
Click to collapse
Wait -- I just wanna be sure I got this right. I've been doing this for a few months now, so I THINK I sorta know what I'm doing, but I just wanna check to be sure.
So right now, I've got a firmware version of 2.3.4, a baseband version of EH06, and a build number of GINGERBREA.EH06. I CAN change the baseband to EB13, but when I do that the firmware and build number do not change.
Just to be sure, is there something I might have forgotten? I followed the directions, but I just wanna be sure.
And you didn't think to nand backup before going to eh06? Tsk tsk tsk.
Shinydude100 said:
And you didn't think to nand backup before going to eh06? Tsk tsk tsk.
Click to expand...
Click to collapse
See, that's the funny part: I DID make nand backup. And I tried to restore but it wouldn't let me. It kept saying "aborted".
Hm... negatory md5 match?
Shinydude100 said:
Hm... negatory md5 match?
Click to expand...
Click to collapse
....What's that?
Nand backup in CWM creates an MD5 checksum. If it was in any way corrupt,or incomplete, you could experience a succesful restore with issues. Or an unsucessful restore all-together.
.....So does this mea there's no hope for me then?
Not quite, if someone was willing to share their nand backup with you, you could always put that inside the clockworkmod folder found on your sd card and try that.
Kangaji said:
Wait -- I just wanna be sure I got this right. I've been doing this for a few months now, so I THINK I sorta know what I'm doing, but I just wanna check to be sure.
So right now, I've got a firmware version of 2.3.4, a baseband version of EH06, and a build number of GINGERBREA.EH06. I CAN change the baseband to EB13, but when I do that the firmware and build number do not change.
Just to be sure, is there something I might have forgotten? I followed the directions, but I just wanna be sure.
Click to expand...
Click to collapse
Then you are only Odining the modem which is the baseband. If you restore a nand backup from 3.1.0.1 it will put your kernel and ROM back on. If you want to be on EB13 or EC05 then you will need to flash a ROM for that or after Odining a stock tar and rooting do only Restore Advanced Data from a nand.
Also if you are getting MD5 mismatches there is a thread for trying to repair those.
http://forum.xda-developers.com/showthread.php?p=14170473
kennyglass123 said:
Then you are only Odining the modem which is the baseband. If you restore a nand backup from 3.1.0.1 it will put your kernel and ROM back on. If you want to be on EB13 or EC05 then you will need to flash a ROM for that or after Odining a stock tar and rooting do only Restore Advanced Data from a nand.
Click to expand...
Click to collapse
I see. Except that now after Odining my nand backups are all gone for som reason....
Would anyone happen to have a nand backup they wanna share?
Big thanks to RoadRAGEN for helping me figure out an ext4 issue! Odin this to get Odexed stock EG30 with latest root and su binary and Busybox 1.18.4.
This does not wipe data.
I am not responsible for anything that happens to your phone. You do this at your own risk.
I have only tested this with the stock kernel and Bubby's CWM kernel.
Download​
IMPORTANT: Make sure you have installed the proper XP or Win7 drivers before starting. Also, remove the SD card from the phone (this may not be necessary, but having the SD card installed has caused Odin to fail for a number of people, so might as well just do it).
1. Extract the contents of the zip file to a folder
2. Open odin
3. Put your phone in download mode (Shut it off, wait for lights to all go out, then hold v-down + power)
4. connect phone (you should see odin put a Com4 or something like that in the first box. The actual number is NOT important what is important is something popped up there when you connected your device, meaning ODIN can see it)
5. The only box that should be checked is Auto Reboot.
6. You do not need to choose a pit file.
7. In the PDA Section choose the tar file. (Odexed-Rooted-Busybox-EG30.tar)
8. Hit start. It will do its thing.
9. If it fails than try a new cable.
10. If the phone hangs for any reason take the battery and sdcard out and let it sit for an hour. Put it back together and try again.
reserved just in case
reserved again
Sexy bro !
Link is up.
ty for this.
ahhhh!! finally!! thanks crawrj!
so to confirm, we can ODIN this and then bubblys CWM @ http://forum.xda-developers.com/showthread.php?t=1268037?
chip! said:
ahhhh!! finally!! thanks crawrj!
so to confirm, we can ODIN this and then bubblys CWM @ http://forum.xda-developers.com/showthread.php?t=1268037?
Click to expand...
Click to collapse
Yes. That is what I have done in testing.
So with this we will have as stock of a ROM as we can currently have, yet still have root and busybox? By stock, I mean the default, out of the factory stock ROM which many claim does not have the LOS issues? Just confused somewhat...
Dude, major win here. Good work!
Sent from my SPH-D710 using xda premium
How bad is it if you put the the tar file in the bootloader spot by mistake? It still worked and seems to be fine. Im rooted with stock kernel.
Thanks
Sent from my SPH-D710 using Tapatalk
Euclid's Brother said:
How bad is it if you put the the tar file in the bootloader spot by mistake? It still worked and seems to be fine. Im rooted with stock kernel.
Thanks
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Nothing is bad as long as you can get into download mode no matter what you did. If it won't work you just odin it back.
HondaCop said:
So with this we will have as stock of a ROM as we can currently have, yet still have root and busybox? By stock, I mean the default, out of the factory stock ROM which many claim does not have the LOS issues? Just confused somewhat...
Click to expand...
Click to collapse
That is correct. It is a stock file system with root and busybox. This is not a kernel so it will not replace that or any issues with that.
total nooob about this but which file do i need?
Odin tar: coming soon.
MD5: e6adb2290a514af674366de7b460725d
http://dev-host.org/m0nd8k926g6c/Ode...sybox-EG30.tar
Odin 1.85 including instructions:
MD5: 69b41fc23052e9df82b5464928583b65
http://dev-host.org/006p4mwqzq2n/Odin3_v1.85.zip
rdcrds said:
total nooob about this but which file do i need?
Odin tar: coming soon.
MD5: e6adb2290a514af674366de7b460725d
http://dev-host.org/m0nd8k926g6c/Ode...sybox-EG30.tar
Odin 1.85 including instructions:
MD5: 69b41fc23052e9df82b5464928583b65
http://dev-host.org/006p4mwqzq2n/Odin3_v1.85.zip
Click to expand...
Click to collapse
Odin is the program you use to flash the tar. The tar is the actual package.
crawrj said:
Odin is the program you use to flash the tar. The tar is the actual package.
Click to expand...
Click to collapse
oh ok i have odin already that is why i was confused what this was thanks
Glad to have a stock ROM available
I am on zedo's v4 will this work over it?
crawrj said:
That is correct. It is a stock file system with root and busybox. This is not a kernel so it will not replace that or any issues with that.
Click to expand...
Click to collapse
Ohhh ok, so I can flash this and keep my current Zedomax kernel if need be? Sweet! Thanks!
Sent from my Samsung Galaxy S II Epic Touch 4G WTF BBQ
HondaCop said:
Ohhh ok, so I can flash this and keep my current Zedomax kernel if need be? Sweet! Thanks!
Sent from my Samsung Galaxy S II Epic Touch 4G WTF BBQ
Click to expand...
Click to collapse
So i guess we can flash this over zedo's v4 anyone try yet?
100% factory. Pulled straight from Samsung's servers and decrypted for your flashing pleasure.
http://www.4shared.com/zip/rM9GGS0X/SGH-T989_TMB_1_20120608172207_.html
http://uploading.com/files/4ed8d4md/SGH-T989_TMB_1_20120608172207_ugy1nehf4g.zip/
.zip
CRC32: A3A8BBC9
MD5: B6DD110BD2F6CF6AB6DFC0D834439B65
SHA-1: F4F25A4B14710D944841D1FDBD6B91449526C845
.tar.md5
CRC32: 686A2AF6
MD5: A203B403B26C8790F7080407524FC80A
SHA-1: 08B9F647CA87EA44DC8FCAEFABA5471B420004F6
Unzip and put file into PDA in ODIN and flash away! If you need ODIN, it is attached below.
*WARNING* DO NOT CHECK RE-PARTITION OR ANYTHING ELSE. ONLY AUTO-REBOOT AND F. RESET TIMER SHOULD BE CHECKED.
If you need more information about this file and what it is/what to do with it, read the stickies at the top of this forum to learn more about ODIN and what it is used for. This file is provided mostly for people who like me who prefer to odin a stock rom and tweak it themselves. It will also prove INVALUABLE from here on out for when you need to unroot your phone (send into t-mobile/samsung, just want it un-rooted).
IF YOU WANT ROOT:
I also attached the latest superuser and CWM recovery for those who want to root.
Put the recovery.tar in the pda slot and flash for CWM recovery.
Then install the attached superuser inside CWM recovery to have full root!
FYI: It's a known issue that superuser usually does not "stick" on the first try. This is with ANY ROM for our phones. Just keep flashing it (usually 2 to 3 times)until it says installation complete.
THIS WILL NOT AFFECT YOUR DOWNLOAD/FLASH COUNTER (+)
Will this work in clockworkmod recovery?
Robca79 said:
Will this work in clockworkmod recovery?
Click to expand...
Click to collapse
NO, it clearly says ODIN on top.
Mr. X is making the flashable zip.
Powered by the SGSII
Nope i believe Mr. X is making that as we speak. This is for a full ODIN flash.
rooted?
Can't wait for your link, can I use CWM to flash? Is the firmware already rooted or
factory fresh one?
Wow you guys...just wow...
Sent from my SGH-T989 using xda premium
Will be factory fresh. Will be like any other stock rom, not rooted. Root it via odin like we have always done for all of our roms. I think it's best to just leave completely intact so we always have an option to get our phones back to 100% factory. The CW flashable zips and rooted custom roms are on their way.
You should've seen this coming dude ! Lol
Sent from my iPad using Tapatalk HD
No dummies use Odin to flash through recovery. Only us tt flashable zip packz from tbe man himself. sheesh....when will yall learn
Sent from my SGH-T989 using xda premium
When you post a less than informative OP it's bound to generate questions.
Can the radio be pulled from this update?
Sent from my SGH-T989D using Tapatalk 2
rsfaze said:
When you post a less than informative OP it's bound to generate questions.
Click to expand...
Click to collapse
Lol what's questionable? It says it's for Odin right in the title. And Odin files are ALWAYS 100% stock
Sent from my SGH-T989 using xda premium
rsfaze said:
When you post a less than informative OP it's bound to generate questions.
Click to expand...
Click to collapse
An odin file is just that: an odin file. No offense if you knew what an ODIN file was you wouldn't be asking.
Whenever the upload finishes in 15 minutes or so, i will make a short description to go with it.
Towle said:
Lol what's questionable? It says it's for Odin right in the title. And Odin files are ALWAYS 100% stock
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thank You ! I was just gonna say the same the exact same thing ! Lol
Hi All!
Trying to get an answer, I am on [ROM][ICS 4.0.4]x :ARKSIDE.UCLE2:: x[BETA07.1][6.04.2012] right now, with this fine community getting ready to drop this without having to use Kies, I keep hearing about UVLDE firmware and needing to flash before flashing the new one TMobile just released (ICS). If I am already on ICS do I still need to flash UVLDE? thanks for the guidance O'h wise ones
slice2011 said:
Hi All!
Trying to get an answer, I am on [ROM][ICS 4.0.4]x :ARKSIDE.UCLE2:: x[BETA07.1][6.04.2012] right now, with this fine community getting ready to drop this without having to use Kies, I keep hearing about UVLDE firmware and needing to flash before flashing the new one TMobile just released (ICS). If I am already on ICS do I still need to flash UVLDE? thanks for the guidance O'h wise ones
Click to expand...
Click to collapse
Nope, just wait for someone to post a zip and you can flash it.
Sent from my SGH-T989 using xda premium
defvayne said:
Can the radio be pulled from this update?
Sent from my SGH-T989D using Tapatalk 2
Click to expand...
Click to collapse
Radio is up in general section in ics thread
Sent from my SGH-T989 using XDA
Towle said:
Nope, just wait for someone to post a zip and you can flash it.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Appreciate the prompt response and answer, much appreciated!
So no go on this ODIN one?
slice2011 said:
Appreciate the prompt response and answer, much appreciated!
So no go on this ODIN one?
Click to expand...
Click to collapse
Flash this via Odin only if you want an UN-rooted TMO ics. Wait for zipped ones as they will be rooted.
All modems (radio / baseband) here are for the T-Mobile M919 I9505 variant only!!
i've seen quite a few people around the threads looking for just modems so figured i'd share. i'll try to keep the thread up to date as our new firmwares release. i'll look into making CWM for those that may want it to be flashable but for now
please follow these instructions
with Odin:
Extract the contents of 7zip/zip archive. Put it in your Odin folder. Do not try to extract files from the .tar.md5.
Run Odin 3.07.exe, and prepare Odin:
1. Check "auto-reboot", and uncheck all other options.
2. Click Phone and select the TAR.md5 you downloaded. Leave other fields empty.
3. Don't panic. Odin may freeze while it checks the MD5 signature of the TAR. This is normal.
* Put your device into Download Mode:
5. Power down fully and disconnect the USB cable.
6. Hold Volume Down + Home + Power.
7. You should now be at Download Mode. Connect your device and wait for it to be recognized.
8. Click Start in Odin.
9. Wait!
10. Device will auto reboot
UVUAMDL Baseband - 05.07.2013
This should be stickied
Sent from my SGH-T999 using xda app-developers app
Can someone make is twrp flashable?
Lolento said:
Can someone make is twrp flashable?
Click to expand...
Click to collapse
it's a two part file so i'm not sure that's possible yet. i'll have to look into it tmw when i have time. if anyone else knows how to, i'll def add it to the OP.
xXchrizhurtyXx said:
This should be stickied
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Ditto!
Sent from my Nexus 7 using xda premium
Thank you mrvirginia. I just did this and it worked just fine.
Wicked ROM v1
Pinan said:
Thank you mrvirginia. I just did this and it worked just fine.
Wicked ROM v1
Click to expand...
Click to collapse
np :silly:
It'll be awesome if it can be flashed through TWRP or CWM.
With this (and possibly a kernel flash), we can now run any on the international i9505 ROMs, right?
Seems like i9505 have the solution to flash through recovery.
http://forum.xda-developers.com/showthread.php?t=2192025
Maybe we would get it soon? ;p
I've tried to Odin mdl but it stays at mdb
Sent from my SGH-M919 using xda app-developers app
mrvirginia said:
np
Click to expand...
Click to collapse
Can we get the MDB radio as well? Would be good to have to experiment with. I found some dead areas, that I did not notice were dead before I changed to MDL.
xXchrizhurtyXx said:
I've tried to Odin mdl but it stays at mdb
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Same
xXchrizhurtyXx said:
I've tried to Odin mdl but it stays at mdb
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
BDHela said:
Same
Click to expand...
Click to collapse
make sure you are selecting Phone and not PDA. confirmed working by numerous people.
Pinan said:
Can we get the MDB radio as well? Would be good to have to experiment with. I found some dead areas, that I did not notice were dead before I changed to MDL.
Click to expand...
Click to collapse
if you can pull it. i don't have those files on hand. i may get them tmw.
mrvirginia said:
make sure you are selecting Phone and not PDA. confirmed working by numerous people.
if you can pull it. i don't have those files on hand. i may get them tmw.
Click to expand...
Click to collapse
I did that sir. Still saying MDB in about. Sorry
Running Wicked 2
nitrogen618 said:
Seems like i9505 have the solution to flash through recovery.
http://forum.xda-developers.com/showthread.php?t=2192025
Maybe we would get it soon? ;p
Click to expand...
Click to collapse
this is a one part modem.bin. the Odin file in OP is a two-part modem, modem.bin and NON-HLOS.bin. i'm fairly certain we need both parts and am not sure how that works via CWM. i can make one with both parts flashed to the modem location, but can't guarantee what that would do if anything...
BDHela said:
I did that sir. Still saying MDB in about. Sorry
Running Wicked 2
Click to expand...
Click to collapse
not sure what to tell you, mate.
BDHela said:
I did that sir. Still saying MDB in about. Sorry
Running Wicked 2
Click to expand...
Click to collapse
I did the same, Odin to phone and it says MDB but Odin reported 1 successful and 0 failed. Isn't there two files though?
MD5 checked out so I know all of that is solid it wasn't a bad download, maybe it's a glitch or something.
Orical said:
I did the same, Odin to phone and it says MDB but Odin reported 1 successful and 0 failed. Isn't there two files though?
MD5 checked out so I know all of that is solid it wasn't a bad download, maybe it's a glitch or something.
Click to expand...
Click to collapse
yes, two files but it will always say 1 successful. says same when you flash an entire stock image which includes quite a few files (imgs).
mrvirginia said:
yes, two files but it will stay say 1 successful. says same when you flash an entire stock image which includes quite a few files (imgs).
Click to expand...
Click to collapse
I saw the other file you listed in the scroll report while flashing but it never said it errored at all just listed then completed the reboot, meh maybe it's just one of those things it's hit or miss depending on the device.