does anyone have the .pit file for the t-mobile note 2, or is it the same as the one for the international version... can i have a link?
Here you go.
http://forum.xda-developers.com/showthread.php?p=48417514
Sent from my SGH-T889 using xda app-developers app
ciphercodes said:
Here you go.
http://forum.xda-developers.com/showthread.php?p=48417514
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Thanks! My phone currently can only boot in download mode and recovery mode as I flashed the international version firmware into this... And each time I try flashing I get the nand error... So I will have to use the .pit file right? Thanks again!
Sent from my Nexus 5 using xda app-developers app
mlndshh said:
Thanks! My phone currently can only boot in download mode and recovery mode as I flashed the international version firmware into this... And each time I try flashing I get the nand error... So I will have to use the .pit file right? Thanks again!
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Is flashing stuck at Nand Write ?
Pit files should only be used as a last resort, I highly advise NOT to use them if you are not 100% certain of what it is going to do.
Did you already rule out the following items?
- USB cable is not an issue, USB Drivers are fine, USB debugging is turned on and KIES is not running
- Flashing the correct ROM
- Different versions of ODIN
ciphercodes said:
Is flashing stuck at Nand Write ?
Pit files should only be used as a last resort, I highly advise NOT to use them if you are not 100% certain of what it is going to do.
Did you already rule out the following items?
- USB cable is not an issue, USB Drivers are fine, USB debugging is turned on and KIES is not runnig
- Flashing the correct ROM
- Different versions if ODIN
Click to expand...
Click to collapse
yes it is stuck on NAND write...however i will try flashing the rom meant fot t889 first... what if that fails? using the .pit file would be the only option right? thanks!
EDIT: It flashes perfectly after i flashed with the t889 image...Thanks for your help! sorry didn't try this before as i was still downloading it.
mlndshh said:
yes it is stuck on NAND write...however i will try flashing the rom meant fot t889 first... what if that fails? using the .pit file would be the only option right? thanks!
EDIT: It flashes perfectly after i flashed with the t889 image...Thanks for your help! sorry didn't try this before as i was still downloading it.
Click to expand...
Click to collapse
Glad to know it worked without having to go through pit files.
ciphercodes said:
Glad to know it worked without having to go through pit files.
Click to expand...
Click to collapse
Thanks Again! I have a problem though...this was present before as well, so after flashing this and prior to this, there were network problems i.e the network continuously changes... sometimes on 1 bar sometimes 3 sometimes none...I live in India and don't use a t-mobile sim card if that helps.
mlndshh said:
Thanks Again! I have a problem though...this was present before as well, so after flashing this and prior to this, there were network problems i.e the network continuously changes... sometimes on 1 bar sometimes 3 sometimes none...I live in India and don't use a t-mobile sim card if that helps.
Click to expand...
Click to collapse
This is common if the phone is an area where network is spotty. This is most likely an issue with the network and not the phone.
ciphercodes said:
This is common if the phone is an area where network is spotty. This is most likely an issue with the network and not the phone.
Click to expand...
Click to collapse
Nope it happens everywhere... it seems like a hardware problem as i can't make any calls as well :-/
mlndshh said:
Nope it happens everywhere... it seems like a hardware problem as i can't make any calls as well :-/
Click to expand...
Click to collapse
Did it ever worked with any non-tmobile sim ?
Do you see your IMEI under settings->about device->status ?
Related
A buddy of mine trashed his SGS3 and got it stuck in a boot loop.
He was also handicapped by being on a MAC
As he was able to get into both download mode and recovery, (CWM 5.5.0.x) I assured him he could recover his phone..
Got him to dl loaded the following ROM, and got it copied to his external SD card:
[ROM] Deodexed + Completely debloated T999UVLEM
http://forum.xda-developers.com/showthread.php?t=1752327
Click to expand...
Click to collapse
Then booted into recovery, did a factory reset, installed the ROM, (twice) then did a fix permissions
His SGS3 will now boot up to the desktop, and shows the phone signal
The remaining issue is he does not have data working, and there also seems to be an issue with the "home" button.
If this was my Sprint SGS3, I would be thinking there is a SW issue with the modem drivers or some such, but I am unsure how to check/verify this on the t-mobile version, and was looking for tips on what to load, and/or what to check to resolve the lack of data signal on his SGS3.
Phone info:
Samsung SGS3 - SGH-T999
carrier: t-mobile
baseband version: T999UVLH2
Any tips?
What ROM did you flash ?
Sent from my SGH-T999 using xda premium
funziebear said:
What ROM did you flash ?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
This one: [ROM] Deodexed + Completely debloated T999UVLEM
From this thread: http://forum.xda-developers.com/showthread.php?t=1752327
Does he still have his IMEI? Might either need to inject the IMEI back in, or if it's still intact, you might just want to try and Odin back to stock and start from scratch.
Sent from my Wicked S3
sleevasteve said:
Does he still have his IMEI?
Click to expand...
Click to collapse
Not sure how to check/fix that, will do a thread search.. thanks
edit: found a help thread, but once again.. looks like it needs a windows system...sigh..
http://forum.xda-developers.com/showthread.php?t=1858174&highlight=imei
sleevasteve said:
you might just want to try and Odin back to stock and start from scratch.
Sent from my Wicked S3
Click to expand...
Click to collapse
This is my preference, but as he has a MAC, thats doesn't seem to be an option
Does he still have it? easiest way to check is *#06# on dialer
Also is there a possibility it might be blacklisted ?
Sent from my SGH-T999 using xda premium
funziebear said:
Does he still have it? easiest way to check is *#06# on dialer
Click to expand...
Click to collapse
Thanks, will have him check..
funziebear said:
Also is there a possibility it might be blacklisted ?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Not that I am aware of, it was working before he started messing with it, and just got it into a bootloop he couldnt get out of.
DCRocks said:
A buddy of mine trashed his SGS3 and got it stuck in a boot loop.
He was also handicapped by being on a MAC
As he was able to get into both download mode and recovery, (CWM 5.5.0.x) I assured him he could recover his phone..
Got him to dl loaded the following ROM, and got it copied to his external SD card:
Then booted into recovery, did a factory reset, installed the ROM, (twice) then did a fix permissions
His SGS3 will now boot up to the desktop, and shows the phone signal
The remaining issue is he does not have data working, and there also seems to be an issue with the "home" button.
If this was my Sprint SGS3, I would be thinking there is a SW issue with the modem drivers or some such, but I am unsure how to check/verify this on the t-mobile version, and was looking for tips on what to load, and/or what to check to resolve the lack of data signal on his SGS3.
Phone info:
Samsung SGS3 - SGH-T999
carrier: t-mobile
baseband version: T999UVLH2
Any tips?
Click to expand...
Click to collapse
Can you also ask him to check the APN settings for Tmobile. It will be in more settings for networks and Access Point.
run virtual pc or a computer within a computer program like that or go down to an internet cafe or something
Sent from my SGH-T999 using xda premium
All modems (radio / baseband) here are for the T-Mobile M919 I9505 variant only!!
i've seen quite a few people around the threads looking for just modems so figured i'd share. i'll try to keep the thread up to date as our new firmwares release. i'll look into making CWM for those that may want it to be flashable but for now
please follow these instructions
with Odin:
Extract the contents of 7zip/zip archive. Put it in your Odin folder. Do not try to extract files from the .tar.md5.
Run Odin 3.07.exe, and prepare Odin:
1. Check "auto-reboot", and uncheck all other options.
2. Click Phone and select the TAR.md5 you downloaded. Leave other fields empty.
3. Don't panic. Odin may freeze while it checks the MD5 signature of the TAR. This is normal.
* Put your device into Download Mode:
5. Power down fully and disconnect the USB cable.
6. Hold Volume Down + Home + Power.
7. You should now be at Download Mode. Connect your device and wait for it to be recognized.
8. Click Start in Odin.
9. Wait!
10. Device will auto reboot
UVUAMDL Baseband - 05.07.2013
This should be stickied
Sent from my SGH-T999 using xda app-developers app
Can someone make is twrp flashable?
Lolento said:
Can someone make is twrp flashable?
Click to expand...
Click to collapse
it's a two part file so i'm not sure that's possible yet. i'll have to look into it tmw when i have time. if anyone else knows how to, i'll def add it to the OP.
xXchrizhurtyXx said:
This should be stickied
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Ditto!
Sent from my Nexus 7 using xda premium
Thank you mrvirginia. I just did this and it worked just fine.
Wicked ROM v1
Pinan said:
Thank you mrvirginia. I just did this and it worked just fine.
Wicked ROM v1
Click to expand...
Click to collapse
np :silly:
It'll be awesome if it can be flashed through TWRP or CWM.
With this (and possibly a kernel flash), we can now run any on the international i9505 ROMs, right?
Seems like i9505 have the solution to flash through recovery.
http://forum.xda-developers.com/showthread.php?t=2192025
Maybe we would get it soon? ;p
I've tried to Odin mdl but it stays at mdb
Sent from my SGH-M919 using xda app-developers app
mrvirginia said:
np
Click to expand...
Click to collapse
Can we get the MDB radio as well? Would be good to have to experiment with. I found some dead areas, that I did not notice were dead before I changed to MDL.
xXchrizhurtyXx said:
I've tried to Odin mdl but it stays at mdb
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Same
xXchrizhurtyXx said:
I've tried to Odin mdl but it stays at mdb
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
BDHela said:
Same
Click to expand...
Click to collapse
make sure you are selecting Phone and not PDA. confirmed working by numerous people.
Pinan said:
Can we get the MDB radio as well? Would be good to have to experiment with. I found some dead areas, that I did not notice were dead before I changed to MDL.
Click to expand...
Click to collapse
if you can pull it. i don't have those files on hand. i may get them tmw.
mrvirginia said:
make sure you are selecting Phone and not PDA. confirmed working by numerous people.
if you can pull it. i don't have those files on hand. i may get them tmw.
Click to expand...
Click to collapse
I did that sir. Still saying MDB in about. Sorry
Running Wicked 2
nitrogen618 said:
Seems like i9505 have the solution to flash through recovery.
http://forum.xda-developers.com/showthread.php?t=2192025
Maybe we would get it soon? ;p
Click to expand...
Click to collapse
this is a one part modem.bin. the Odin file in OP is a two-part modem, modem.bin and NON-HLOS.bin. i'm fairly certain we need both parts and am not sure how that works via CWM. i can make one with both parts flashed to the modem location, but can't guarantee what that would do if anything...
BDHela said:
I did that sir. Still saying MDB in about. Sorry
Running Wicked 2
Click to expand...
Click to collapse
not sure what to tell you, mate.
BDHela said:
I did that sir. Still saying MDB in about. Sorry
Running Wicked 2
Click to expand...
Click to collapse
I did the same, Odin to phone and it says MDB but Odin reported 1 successful and 0 failed. Isn't there two files though?
MD5 checked out so I know all of that is solid it wasn't a bad download, maybe it's a glitch or something.
Orical said:
I did the same, Odin to phone and it says MDB but Odin reported 1 successful and 0 failed. Isn't there two files though?
MD5 checked out so I know all of that is solid it wasn't a bad download, maybe it's a glitch or something.
Click to expand...
Click to collapse
yes, two files but it will always say 1 successful. says same when you flash an entire stock image which includes quite a few files (imgs).
mrvirginia said:
yes, two files but it will stay say 1 successful. says same when you flash an entire stock image which includes quite a few files (imgs).
Click to expand...
Click to collapse
I saw the other file you listed in the scroll report while flashing but it never said it errored at all just listed then completed the reboot, meh maybe it's just one of those things it's hit or miss depending on the device.
We assume no responsibility or accountability for any damage that may occur from flashing these modems. As with all device modifications the user assumes all risk involved.
Thanks to the following people who have helped contribute along the way: @DirtyOldMan @celtichazard
Please reach out to Myself and @AlEjAnDrO812 with any request and we will continue to do our best for the community.
HAPPY FLASHING!
Click Here For all Canadian/Us Carriers Modems
Omg...work on M919 Tmobile US?
Sent from my SGH-M919 using Tapatalk 2
epsix said:
Omg...work on M919 Tmobile US?
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
No reason why it shouldn't! AWS is enabled and unlocked on most that are posted
Sent from my SGH-I337M using Tapatalk 2
What does aws do for us on T-Mobile?
Sent from my GT-I9505G using xda app-developers app
roblxskye said:
What does aws do for us on T-Mobile?
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
I strongly recommend reading the main thread but basically Advanced Wireless Services generally refers to the 1700/2100MHz frequency band pairing in the U.S. that will be used for T-Mobile USA's 3G UMTS network
Sent from my SGH-I337M using Tapatalk 2
Anybody who had luck with MG1 modem?
I tried to flash the MG1 modem from the tread using mobile odin (untar the MG1.tar, flash modem.bin using modem2 option). When I rebooted the baseband under settings/about was unknown and I couldn't get any reception. What am I doing wrong?
Im kinda confused, sorry but as far as I know there no updates for t mobiles modem/radio the only one I know from tmobile id currently is M919UVUAMDL? Many said if you flash others carrier modem/radio your phone gonna be bricked.
Please tell me that I can flash all these radio/modems it would make mr love my tmobile S4 even more. :thumbup:
Sent from my SGH-M919 using Tapatalk 2
onurd said:
I tried to flash the MG1 modem from the tread using mobile odin (untar the MG1.tar, flash modem.bin using modem2 option). When I rebooted the baseband under settings/about was unknown and I couldn't get any reception. What am I doing wrong?
Click to expand...
Click to collapse
Try re flashing your kernel of choice... If that doesn't work you'll have to stay on the modem specific to your carrier 1337m don't have any issues flashing international modems so I don't see why it wouldn't work.
Sent from my SGH-I337M using Tapatalk 2
2Tone5 said:
Try re flashing your kernel of choice... If that doesn't work you'll have to stay on the modem specific to your carrier 1337m don't have any issues flashing international modems so I don't see why it wouldn't work.
Sent from my SGH-I337M using Tapatalk 2
Click to expand...
Click to collapse
I tried to re-flash using ODIN 3.07, and I get an error saying that the C++ runtime crashed. I wonder whether the file is corrupt (I have re-downloaded MG1.tar, still same problem).... Very odd..
Somewhat, mobile odin broke my CWM recovery as well during this process. When I try to reboot into recovery to flash the kernel, the phone simply reboot after showing th small blue rebooting recovery text. So, I had to reflash the recovery through desktop odin again... Anyhow, long story short, I have reflashed google play edition 4.2.2 kernel that I was using, and still cannot get any reception (modem section still unknown) with the MG1 modem file...
onurd said:
I tried to re-flash using ODIN 3.07, and I get an error saying that the C++ runtime crashed. I wonder whether the file is corrupt (I have re-downloaded MG1.tar, still same problem).... Very odd..
Somewhat, mobile odin broke my CWM recovery as well during this process. When I try to reboot into recovery to flash the kernel, the phone simply reboot after showing th small blue rebooting recovery text. So, I had to reflash the recovery through desktop odin again... Anyhow, long story short, I have reflashed google play edition 4.2.2 kernel that I was using, and still cannot get any reception (modem section still unknown) with the MG1 modem file...
Click to expand...
Click to collapse
That's a first for me.... never heard of these issues... . try downloading the MDL unlocked zip extracting it and using odin to flash the bin file
Sent from my SGH-I337M using Tapatalk 2
Make sure you're following the instructions in the op exactly... it's hard for me to help if you start experimenting
Sent from my SGH-I337M using Tapatalk 2
2Tone5 said:
Make sure you're following the instructions in the op exactly... it's hard for me to help if you start experimenting
Sent from my SGH-I337M using Tapatalk 2
Click to expand...
Click to collapse
I did follow the Mobile Odin instructions.
Anyhow, now even after flashing the original standalone MDL modem through desktop odin, I have no baseband.... Kind of sucks I will try to go back to fully stock with the original ODIN package and retry later on. Hope this will fix my modem...
onurd said:
I did follow the Mobile Odin instructions.
Anyhow, now even after flashing the original standalone MDL modem through desktop odin, I have no baseband.... Kind of sucks I will try to go back to fully stock with the original ODIN package and retry later on. Hope this will fix my modem...
Click to expand...
Click to collapse
Sorry I thought you had said you went into recovery to flash the modem at first my bad
Going back to original firmware through odin always fixes problems that you can count on... I've bricked so many Samsung devices in my day ... flashing stock firmware works
Sent from my SGH-I337M using Tapatalk 2
2Tone5 said:
Sorry I thought you had said you went into recovery to flash the modem at first my bad
Going back to original firmware through odin always fixes problems that you can count on... I've bricked so many Samsung devices in my day ... flashing stock firmware works
Sent from my SGH-I337M using Tapatalk 2
Click to expand...
Click to collapse
That's odd.. I though the flash the original firmware would fix the baseband problem but I still have "unknown" baseband. I might've screwed this one up royally... Any ideas how to fix this?
onurd said:
That's odd.. I though the flash the original firmware would fix the baseband problem but I still have "unknown" baseband. I might've screwed this one up royally... Any ideas how to fix this?
Click to expand...
Click to collapse
Yup.... download triangle away...Flash stock firmware. .. boot into stock recovery and factory reset and wipe cache reboot.. should be good to go
Sent from my SGH-I337M using Tapatalk 2
I'm also adding the modem for tmobile to the op incase you wanna try flashing that since that would have been the original modem you had before
Sent from my SGH-I337M using Tapatalk 2
Haven't looked at international version yet.. but about using Odin, aren't the partitions different?
Sent from my SGH-M919 using Tapatalk 2
2Tone5 said:
I'm also adding the modem for tmobile to the op incase you wanna try flashing that since that would have been the original modem you had before
Sent from my SGH-I337M using Tapatalk 2
Click to expand...
Click to collapse
Ok, back to square 1. Fixed the unknown baseband and I am at the original MDL.
Now, I decided to go the DESKTOP ODIN route. Extracted modem.bin, fired up ODIN 3.07, clicked phone, selected modem.bin, unchecked auto reboot, hit start and got fail!. The phone screen shows "secure check fail : mdm". Is this MG1 modem maybe not compatible with M919?
I don't this is a good idea. Flashing other carrier's modem??
onurd said:
Ok, back to square 1. Fixed the unknown baseband and I am at the original MDL.
Now, I decided to go the DESKTOP ODIN route. Extracted modem.bin, fired up ODIN 3.07, clicked phone, selected modem.bin, unchecked auto reboot, hit start and got fail!. The phone screen shows "secure check fail : mdm". Is this MG1 modem maybe not compatible with M919?
Click to expand...
Click to collapse
as I recall s3 and s4 are sensitive to the kind of usb cable your using as I hax problems before. I would check that your using original.
I use the Sprint SlimBean ROM and I had no issues with it on my SCH-S960L. I had no issues with my mobile connection except for the fact that it it took some time to connect to mobile data services or even required a restart or Airplane mode toggled. This along with it sometimes did not switch between 3G and LTE when it should. Because of this I attempted to flash a newer Sprint Galaxy S3 modem. This completely disestablished any connection to services. It has 0 bars and cannot make calls, send texts, or use data. I have tried to reflash the ROM but of course, it did not help at all.
Now in the light of hope, I made a backup of the efs and firmware folders before flashing. I'm not sure how I can fix my issue with this but it was suggested to do so before flashing.
My baseband version was S960LWYAMD6. While I could reflash the old modem, (with help) I would prefer a better modem. (if there are any)
Any help is appreciated.
With best regards,
SirBenjamin
Well this just may be your day. Apparently chxnugs just posted the Modem for your particular device HERE. I would update PRL / Profile first just to see if that will help. Also have you tried ##72786# ?
prboy1969 said:
Well this just may be your day. Apparently chxnugs just posted the Modem for your particular device HERE. I would update PRL / Profile first just to see if that will help. Also have you tried ##72786# ?
Click to expand...
Click to collapse
chxnugs said:
i know this is sprint galaxy s3 section, but the straight talk s3 is basically the same phone and there is no section for it.
if you own this particular model, then you would know that its pure hell trying to find ANY files. this is the stock MD6 modem.bin ripped from my phone. ive seen people ask for this modem because they flashed the MD4 modem in hopes of getting their MSL and/or for the benefits of being able to use the 16-digit password. (which reminds me.. i have read of ways to port the 16-digit password from a .dll file in the phone? i have done loads of searching, but the password is NO WHERE to be found) and needed the stock modem. so for anyone that needs it here it is.
hopefully us ST S3 users will eventually gather up all the odin files to completely restore our phones when needed
Click to expand...
Click to collapse
I tried to flash the file chxnugs provided. I used both Mobile Odin and replaced the modem file in another flashable ZIP. Neither of them worked and I still get 0 bars/unknown baseband.
Honestly I have no idea what to do to fix this but it needs to work.
Again I say, all help is appreciated.
ok i extracted a fresh modem.bin straight from my phone. let me know if it works
Oh and just asking.. have you extracted the .bin file from the zip and tried it
Sent from my SCH-S960L using Tapatalk
chxnugs said:
Oh and just asking.. have you extracted the .bin file from the zip and tried it
Sent from my SCH-S960L using Tapatalk
Click to expand...
Click to collapse
chxnugs said:
ok i extracted a fresh modem.bin straight from my phone. let me know if it works
Click to expand...
Click to collapse
I got the same results. I extracted the .bin but renamed it to NON-HLOS.bin since Mobile Odin would not accept it as modem.bin. Am I flashing this wrong?
Sent from my SCH-S960L using Tapatalk
Did you try any of my other suggestions form post #2 ?
im sure your trying to flash it under phone section.. i managed to try to make a flashable CWM version. maybe you can try that and let me know if it works
prboy19648801865 said:
Did you try any of my other suggestions form post #2 ?
Click to expand...
Click to collapse
chxnugs said:
im sure your trying to flash it under phone section.. i managed to try to make a flashable CWM version. maybe you can try that and let me know if it works
Click to expand...
Click to collapse
Proby, I tried to do the other things you suggested. I can't update the PRL/Profile since I'm on a custom ROM. That is unless there is another way. I did not understand what you meant with the number you mentioned. If you wanted me to call that it did nothing.
As for chx, unfortunately it still did not fix it. This quick little modem update is turning into a nightmare. Not only that, but no sound plays, the microphone does not work, and DSP Manager crashes whenever I try to play media.
I really appreciate both of your support though.
Yay! I used Mobile Odin Pro and flashed a file from another thread. It may have been the file or using Mobile Odin Pro since it downloaded the correct driver. I appreciate all of your help, though.
Sent from my SPH-L710 using Tapatalk
Hello Guys,
I've updated my N7100 with the latest official Indian 4.4.2 ROM. I cannot get network connectivity. My device is unlocked, SIM detected, APN set but I have a no connectivity prompt. My IMEI is intact. I searched the forums, and when similar of this happens, the tip is to downgrade to 4.1.2. Well, I cant, i get "Invalid Magic String".
So please help. I have....no phone to say...
-Paul
Paul_Days said:
Hello Guys,
I've updated my N7100 with the latest official Indian 4.4.2 ROM. I cannot get network connectivity. My device is unlocked, SIM detected, APN set but I have a no connectivity prompt. My IMEI is intact. I searched the forums, and when similar of this happens, the tip is to downgrade to 4.1.2. Well, I cant, i get "Invalid Magic String".
So please help. I have....no phone to say...
-Paul
Click to expand...
Click to collapse
Forget about downgrade to 4.1.2.
2 possibilities to get network connection:
a) Flash latest modem of your region
b) Flash XXUFND3 from France (here maybe you got also to flash modem, but not sure)
I did the same thing, flashed ND3 modem. In that wifi always consumes battery even though its not turned ON. And mobile data/surfing speed is ridiculously slow. What should i do?
Sent from my GT-N7100 using xda premium
surfingdude said:
I did the same thing, flashed ND3 modem. In that wifi always consumes battery even though its not turned ON. And mobile data/surfing speed is ridiculously slow. What should i do?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
There are very good modems around, especially NC2
Androidwizzard said:
There are very good modems around, especially NC2
Click to expand...
Click to collapse
It;s no good, I'm runnung Build N7100XXUFND3 with Baseband n7100xxufnc2 and I'm trying to connect to AT&T U.S.
Paul_Days said:
It;s no good, I'm runnung Build N7100XXUFND3 with Baseband n7100xxufnc2 and I'm trying to connect to AT&T U.S.
Click to expand...
Click to collapse
In that case you got to find one suiting to your region/carrier.
Androidwizzard said:
In that case you got to find one suiting to your region/carrier.
Click to expand...
Click to collapse
I'm screwed, there isn't one in kitkat for that, hence the reason I wanted to downgrade.
Paul_Days said:
Hello Guys,
I've updated my N7100 with the latest official Indian 4.4.2 ROM. I cannot get network connectivity. My device is unlocked, SIM detected, APN set but I have a no connectivity prompt. My IMEI is intact. I searched the forums, and when similar of this happens, the tip is to downgrade to 4.1.2. Well, I cant, i get "Invalid Magic String".
So please help. I have....no phone to say...
-Paul
Click to expand...
Click to collapse
To downgrade to 4.1.2 you can try using Mobile Odin and a stock 4.1.2 rom.
wrena said:
To downgrade to 4.1.2 you can try using Mobile Odin and a stock 4.1.2 rom.
Click to expand...
Click to collapse
having the same issue. tried many different modems... not sure how to help. posted asking for diff modem but nobody answered. let me know if you get a reply.
Nope....gonna try a CM rom to atleast see if it works
Sent from my GT-I9082 using XDA Free mobile app
surfingdude said:
I did the same thing, flashed ND3 modem. In that wifi always consumes battery even though its not turned ON. And mobile data/surfing speed is ridiculously slow. What should i do?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
WiFi > Advanced > Untick Always allow scanning
emanuelme said:
having the same issue. tried many different modems... not sure how to help. posted asking for diff modem but nobody answered. let me know if you get a reply.
Click to expand...
Click to collapse
If you mean modem.bin it is included in the stock rom's .tar file. You can see it if you open the .tar file with Winrar.
wrena said:
If you mean modem.bin it is included in the stock rom's .tar file. You can see it if you open the .tar file with Winrar.
Click to expand...
Click to collapse
Thanks. I meant that I tried different modems - it comes with ND3 by default and I've tried flashing NA1, NA3, MK1, MJ5, MJ9, etc. All to no avail. I'm not sure what modem has been used to work with att on 4.3 (i've been out of the USA). If someone knows a reliable modem that they have used with ATT, please let me know.