Develop Bugs

[Q] Samsung I9000 force close

Hi, I received a Samsung I9000. Would not go past "s".
Used odin to flash to Gingerbread- still would not boot. Flashed to stock 2.2.1.
Takes long to boot, then force close keeps on popping up for all applications installed. After startup, I noticed the same user data and applications on phone. I tried *2767*3855#. No luck. Booted into recovery and wiped cache and formatted, no luck. What else can I do?

This thread doesn't belongs here! Please mods. Move it!
Sent from my GT-I9000 using XDA Premium App

wynsak said:
Hi, I received a Samsung I9000. Would not go past "s".
Used odin to flash to Gingerbread- still would not boot. Flashed to stock 2.2.1.
Takes long to boot, then force close keeps on popping up for all applications installed. After startup, I noticed the same user data and applications on phone. I tried *2767*3855#. No luck. Booted into recovery and wiped cache and formatted, no luck. What else can I do?
Click to expand...
Click to collapse
AFAIK as long as you still notice same user data on phone, you won't get any luck repairing force closes.
Try to wipe data/factory reset first, then do flash any stock Gingerbread with repartition checked using Odin.
After that, you should have a clean ROM without FC.
Then it is best to redownload your installed apps from market.
If you would like to restore your apps using Titanium Backup try just to restore app only (without data).
Good luck and cheers...
Sent from my GT-I9000 using xda premium

TerraBuzz said:
AFAIK as long as you still notice same user data on phone, you won't get any luck repairing force closes.
Try to wipe data/factory reset first, then do flash any stock Gingerbread with repartition checked using Odin.
After that, you should have a clean ROM without FC.
Then it is best to redownload your installed apps from market.
If you would like to restore your apps using Titanium Backup try just to restore app only (without data).
Good luck and cheers...
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
and also try to format the internal SD memory for more clean rom flash...
but dont forget to backup it 1st...

I have the same problem ,, the problem is that the internal memory won't format on any way or another ,, I used alot of methods to format it but nothing change .. I still able to read my memory and copy whatever I want but not able to remove anything or make any changes ,,,,,,,,,,, sorry for my bad english

[Q] cyanogeon7 nightly build problem

i find that the nightly build is cool and is awesome. the problem is when i use system panel task manager, the phone reboots. i dont know why and its more laggy than the cm7 mod please tell me its me doing something wrong not my phone's or the mod's fault.

and it svery irritating that it keeps hanging. please someone help me with the nightly mod thing i want to use.

Go for nightly#205. And do a full wipe including data,cache,dalvic cache, and perform a factory resetting from cwm before you flash the nightly. Also use latest buzz kernal so that you can overclock your phone.
Sent from my HTC Wildfire using XDA App

I know how to clear data and cache from clockwork mod. How to clear devik. Ache and factory reset from clockwork mod. And the kernel from where? Can please tell me and post link for kernel?

ongtengjun said:
I know how to clear data and cache from clockwork mod. How to clear devik. Ache and factory reset from clockwork mod. And the kernel from where? Can please tell me and post link for kernel?
Click to expand...
Click to collapse
i had problem with my previous nightly # 177 when i used darktremor APP2SD script .. even when i re flashed nightly #205 .. things were the same (Talking about random reboots upon opening task manager / and installing apps etc. ) ..
then i repartitioned my SD and didn't flashed the script... now its fine .. ..

so how did you install it? how to repartition sd card and not flash the script? how to install?

V0odo0 said:
i had problem with my previous nightly # 177 when i used darktremor APP2SD script .. even when i re flashed nightly #205 .. things were the same (Talking about random reboots upon opening task manager / and installing apps etc. ) ..
then i repartitioned my SD and didn't flashed the script... now its fine .. ..
Click to expand...
Click to collapse
Lol you may have used beta 4 script, try beta 3, need to use atleast ext3 as your secondary partition. Try it with latest original cwm recovery. 5.xxx to partition. Do a clean install after partition.
And a personal suggestion. S2e app in market is good than dta2sd, though it have not much functions, but what it have, it does its best. I use it.
Sent from my HTC Wildfire using XDA App

ongtengjun said:
I know how to clear data and cache from clockwork mod. How to clear devik. Ache and factory reset from clockwork mod. And the kernel from where? Can please tell me and post link for kernel?
Click to expand...
Click to collapse
Dude, explore options in cwm, don't do formatting boot, system, data, unless you learn what it does.
Options may vary from version to versions of cwm. So you have to say which cwm version you have. Mine is latest 5.xxx.
In it, data- factory format( user data or wipe user data, which ever it is called) is in main menu. And dalvic cache wipe is in advanced menu.
Lol you must carefully read topic named" complete wildfire index, then ask doubts, after all you can learn new things from every topic.
Your kernal will be in that topic. Check it out.
Sent from my HTC Wildfire using XDA App

another problem
now i got another problem. my wildfire will hang every now and then and i have to pluck out the battery and switch it back on. its very irritating and having to keep doing that will kill my bat very quickly so could anyone tell me any solutions?

To solve your problem, you must say. Your current configuration, rom, kernal, radio, tweeks, and what have you done just before you got the error
Sent from my HTC Wildfire using XDA App

well i am using the cm7 nightly build #205. kernel is buzz-kernel-2.6.35. i just downloaded some apps that were in my phone when i was using cm7 stable. and there wasnt a problem. do i have to upgrade to latest build and kernel? oh and just a question. if i want to upgrade from #205 to #208, do i have have to like wipe my data and cache and dalvik cache? i wouldnt wanna redownload and change everythin again

You can install the nightlies on top of one another without wiping anything, sometimes it seems better to wipe the cache to me but not always necessary, leave data alone.
Word of warning though, always make a nandroid backup before installing a new rom, although they're stable they are still called experimental for a reason, and sometimes (not very often) things can still go wrong.
Sent from my HTC Wildfire using xda premium

i wiped both the dalvik and partition cache and installed the #208 nightly build and the latest kernel but then the phone would just restart automatically. do i have to wipe data as well?

Yes do a "Wipe Data / Factory Reset" in Clockworkmod if it is giving you issues. Then try a fresh install and check again for instability.
Note - Performing a Wipe Data / Factory Reset will erase all data (Except SD Card)

well i not sure but i think the problem still occurs.. yes it does. i wiped data, cache and dalvik cache, did a install using cwm and it still reboots WHAT TO DO NOW

showlyshah said:
Lol you may have used beta 4 script, try beta 3, need to use atleast ext3 as your secondary partition. Try it with latest original cwm recovery. 5.xxx to partition. Do a clean install after partition.
And a personal suggestion. S2e app in market is good than dta2sd, though it have not much functions, but what it have, it does its best. I use it.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Hey thanks dude .. yup i was using beta 3 last time.. beta 4 was a disaster to CM7.. .. i tried that too ..
but i think my partition was ext2 coz i am using CWM 3 .. will try with CWM 5 .. and sure... S2e too ...

Do you let it boot up before flashing the kernel?
Sent from my HTC Wildfire using xda premium

For i always keep a backup of my contacts in sd. Also apps using titanium backup, i had never used a nandroid backup till now, i alwayz do fresh installs, wiping every thing but not fat32. And always keep things updated.
Sent from my HTC Wildfire using XDA App

ok now i have another problem. my phone will just reboot after hanging when i open system panel task manager. please some one help me

ongtengjun said:
ok now i have another problem. my phone will just reboot after hanging when i open system panel task manager. please some one help me
Click to expand...
Click to collapse
dude is it the same one you had before? thats why we mention to give your current spec. with out it we cant do any thing or we cant help you.

[Q] Finally got DiXperia 2

I finally installed the dixperia 2 ROM on my r800i. I must say, its fast, no lags when scrolling through screen, can heavily multi-task without lagging. I get about 220mb-180b free now compared to 180-110mb on jokawild v3 rom. imo this is probably better than the jokawild v3 rom. But I do have some problems with it:
1)I cant turn on wifi, i try to go on the setting to try and turn on wifi and it tells me error. Any way I can fix this?
2) Also, before flashing the rom on my phone, the instructions said to: full wipe, wipe cache, clean dalvik, fix battery and fix permissions. I couldn't find the full wipe, fix battery and I think the wipe cache options in the CWM recovery. So I only clicked on fixed permissions and also cleaned the dalvik. Is this is a problem? Should I wipe everything it tells me to?
Oh and btw, my apps that I installed, (e.g. flipboard, whatsapp, gta 3 etc) are still there. Shouldnt they have gone since I flashed a new ROM? Somethings telling me I didn't do it properly....

Check in the OP for the dixperia thread and there might be a flashable zip to fix your wifi issues.
I think when you were supposed to wipe your phone, dalvik cache etc. Manually when flashing the ROM but i don't know if it'll be OK in this instance since the ROM seems to be working fine for you
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

If you're using custom kernel please head to the kernel thread, download WiFi modules and flash it via CWM. Oh and please follow steps if not some things might not work accordingly. DO NOT SKIP!

Ok I'll flash the WiFi modules but how do I get my phone to be reset? Like all the system apps that come with the dixperia2 rom and that's it,none of my apps should be there? Is there a way of that?

I recommend you backup all apps, wipe everything and flash the rom. Or you can reflash ftf and reinstall the rom to have a cleaner Rom.

if I wipe everything, will all the things on my SD card also go away? Or is it only the things in the internal memory that will go away?

If you factory reset, the things on your SD card won't go away. Only if you chose to wipe the SD card will everything go
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

TwilightLoz said:
if I wipe everything, will all the things on my SD card also go away? Or is it only the things in the internal memory that will go away?
Click to expand...
Click to collapse
Nope just internal. And your phone will looks like you just bought it few minutes ago.

yeh i done that. but i relized that I cant turn on my data connection (e.g. browsing the internet using your sim cards internet). I click on enable data connection and nothing happens. Wifi works though.

TwilightLoz said:
yeh i done that. but i relized that I cant turn on my data connection (e.g. browsing the internet using your sim cards internet). I click on enable data connection and nothing happens. Wifi works though.
Click to expand...
Click to collapse
Did you set up your access points? Settings > wireless & network > mobile networks > access point names

If u can connect to a wireless network go to settings Xperia and download internet settings

Notification and Status bar are gone

Hi, yesterday i updated my KF2 (i think i was using powerpoint45's rom on version 6, i dont really remember it was a couple of moths ago) to the latest nightly of CM10.1 and, like the title says, my notification and navigation bar are missing.
I figure out probably was a problem with the nightly build, and I flashed another version, but I keep with the same problem. I tried with several revisions of powerpoint45, hashcode and CM official (even the most stable one) and I keep having this issue.
I already used TWRP to wipe cache, dalvik cache, system, factory reset and even SD card, mostly any option avaible except the one that wipes system and SD at the same time (because if i do that i wont have a ROM on my SD to flash or a system to download a new ROM from the internet)
I heard about Pie Launcher or something like that and I tried using swipe gestures to get it work, I even check settings > system and everything is activated as far as i can see (nav, notification, etc..). and obviously I disabled and enabled many times expand desktop.
I would really appreciate if someone can help me, because I use this tablet for my work :fingers-crossed:

Wipe data. Next time do a clean install and use titanium backup to backup your apps beforehand
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

mindmajick said:
Wipe data. Next time do a clean install and use titanium backup to backup your apps beforehand
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Couldn't have been said any better, I had the same problem and I did what mindmajick suggested and now everything is working okay.

Not Now, Google Play "App isn't installed."

Had not now working great on my first install. Hated the camera that was described as fast, decided to give the special install script a run for it's money and did a dirty flash while backing up apps, data, etc.
Tried out the Cyanogen Camera and it is much faster and more feature rich than the ones described as such but now google play isn't installed. When I used some of my old apps I got from google play they continually pop up with play services is missing.
I installed gapps from recovery after getting sick of this and it is still not installed for some reason.
Any suggestions besides a full wipe? I am confident a full wipe will fix it but I was hoping I was missing something in the install.

I'm a little confused.... Are you still on Not Now ROM?
Sent from my SPH-D710 using Tapatalk

Yeah, I am on Not Now. I did a dirty flash over my previous clean Not Now install and now google play is missing, even if I install gapps in recovery it says it is not installed.

Have you tried manually side-loading the apk? You can easily find it using Google
Sent from my SPH-D710 using Tapatalk

Eh, all the sites I have been finding look sketchy as hell alongside not knowing which version I need.
I will just do a full wipe and if that doesn't fix it then the xblast or xposed are whats doing it.

Download any version and it should update to the latest by itself. I don't think xposed would affect it... I've run xposed and a million modules on different builds of gb27 and never had that happen.
I would just back everything up, sync and new contacts, and do a fresh install, performing a factory reset and flashing tdunham's JB Format All x2 zip before flashing the ROM. There can be issues with /Preload if it isn't being wiped
Sent from my SPH-D710 using Tapatalk

I ended up doing a fresh install, it has a complete wipe and I did that on top of the format all x2 which is actually included in the installer.
Really was hoping it was a setting in the installer that I messed up but it doesn't seem to have been, dirty flash was the issue.