I have setcpu ocing to 1113 with low of 128 and it says its hitting the 1113 constantly, but according to sys panel I'm not even close...so which program is correct?
If I have min and max 1113 then sys panel sees it.
Sent from my PC36100 using XDA App
what rom and kernel are you using
Using damage control 3.2 ish and netarchy toast
Using nenamark2 as a test when I normally test I get in the 26-27 FPS range using leankernal however opening and or setting any clocks in setcpu will lower my score to no more than 20.5 FPS.
Sent from my GalaxyNexus using XDA App
staticx57 said:
Using nenamark2 as a test when I normally test I get in the 26-27 FPS range using leankernal however opening and or setting any clocks in setcpu will lower my score to no more than 20.5 FPS.
Sent from my GalaxyNexus using XDA App
Click to expand...
Click to collapse
By setting any clocks, do you mean raising the maximum clockspeed? Testing has shown that overclocking to 1.3 or 1.42GHz can actually harm performance on some SGNs.
No, I mean any changes. Even setting it to 1200 MHz will cause the performance hit.
Sent from my GalaxyNexus using XDA App
What is a good setting to set my minimum clock frequency.. the highest i put it to is usually the default 1.5 or underclock it just by a bit to 1.4... but what should i set the minimum to?
I know the lowest is best for battery, but that means the phone will be performing at those low frequencies as well and might slow it down a little bit.
The lowest option i have is 384 mhz then 486, 594, 702, 810, 918, 1.026, 1.134, 1.242, 1.35, 1.458, 1.512, 1.556, 1.62, 1.674, 1.728, 1.782, and 1.836.
I keep mine at the lowest setting. No problems.
Sent from my SGH-T999 using xda premium
Usually at 486 for me
Sent from my SGH-T999 using xda premium
I don't know the difference between underclocking and undervolting but I set down my CPU to try and increase battery life but I don't know how much to put it down. I the default max was 1512 and the minimum was 300 something. Screen off I have a 500 Mac and 300 min. Other times I have a 100 minimum and 1200 max. Can I lower it?
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
What are your best ktoonsez kernel settings in ktweaker?
Sent from my SGH-M919 using xda app-developers app
kevinrubio1 said:
What are your best ktoonsez kernel settings in ktweaker?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
General Screen
governor = ktoonservativeq
scheduler = row Or zen
Min Mhz = 189
Max Mhz = 1998
Voltage Screen
UV'd 70mv across the board
Extras Screen
Screen OFF Profile Mhz = 486
Disable Screen Off Mhz Call = Enabled
Screen OFF Profile Sched = noop
GPU Max Mhz = 627
Screen OFF GPU Max Mhz = 200
Internal Read Ahead = 3072
External Read Ahead = 3072
mDNIe Background Mode = Dynamic
Trinity Colors = Cool
General -> Governor Adjustments Screen
touch_boost_cpu = 1242
sampling_rate_screen_off = 90000
ONLY IF USING ZEN:
General -> I/O Scheduler Adjustments Screen
async_expire = 2500
fifo_batch = 0
sync_expire = 300
Everything else is the default value.
Monkz said:
General Screen
governor = ktoonservativeq
scheduler = row Or zen
Min Mhz = 189
Max Mhz = 1998
Voltage Screen
UV'd 70mv across the board
Extras Screen
Screen OFF Profile Mhz = 486
Disable Screen Off Mhz Call = Enabled
Screen OFF Profile Sched = noop
GPU Max Mhz = 627
Screen OFF GPU Max Mhz = 200
Internal Read Ahead = 3072
External Read Ahead = 3072
mDNIe Background Mode = Dynamic
Trinity Colors = Cool
General -> Governor Adjustments Screen
touch_boost_cpu = 1242
sampling_rate_screen_off = 90000
ONLY IF USING ZEN:
General -> I/O Scheduler Adjustments Screen
async_expire = 2500
fifo_batch = 0
sync_expire = 300
Everything else is the default value.
Click to expand...
Click to collapse
Thanks! Is this for performance or battery? Or balanced between them both?
Sent from my SGH-M919 using xda app-developers app
kevinrubio1 said:
Thanks! Is this for performance or battery? Or balanced between them both?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Balanced with Row, Zen to edge more for Performance at the cost of a bit of battery life.
General Screen
governor = ktoonservativeq
scheduler = row
Min Mhz = 189
Max Mhz = 1998
Voltage Screen
UV'd 50mv
Extras Screen
Screen OFF Profile Mhz = 486
Disable Screen Off Mhz Call = Enabled
Screen OFF Profile Sched = noop
GPU Max Mhz = 504
Screen OFF GPU Max Mhz = 200
Internal Read Ahead = 3072
External Read Ahead = 3072
General -> Governor Adjustments Screen
touch_boost_cpu = 1134
sampling_rate_screen_off = 90000
ALL THE REST ARE STOCK
What about best battery life settings?
Sent from my SGH-M919 using xda app-developers app
kevinrubio1 said:
What about best battery life settings?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
It depends on how much you want to slow down your phone really. The ones posted above are pretty much be best balance between performance and battery life you will get. Much faster than on stock, and uses less battery. But you can disable cores and underclock and play with other governors, but when your running a kernel that already gives better battery life and faster performance than stock, why would you bother changing that?
Monkz said:
It depends on how much you want to slow down your phone really. The ones posted above are pretty much be best balance between performance and battery life you will get. Much faster than on stock, and uses less battery. But you can disable cores and underclock and play with other governors, but when your running a kernel that already gives better battery life and faster performance than stock, why would you bother changing that?
Click to expand...
Click to collapse
True! Thanks I'll try your settings and see if my battery gets better
Sent from my SGH-M919 using xda app-developers app
how are you guys able to overclock? everytime i try to my phone reboots itself
Different chips are different. I always preferred noop for I/o
Sent from my GT-I9505 using xda app-developers app
rockstarar said:
Different chips are different. I always preferred noop for I/o
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Noop instead of ktoonservativeq?
Sent from my SGH-M919 using xda app-developers app
kevinrubio1 said:
Noop instead of ktoonservativeq?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Noop is a scheduler and ktoonservativeq is a governor.
whytechapel_x said:
Noop is a scheduler and ktoonservativeq is a governor.
Click to expand...
Click to collapse
Oh my bad! Is noop better than row?
Sent from my SGH-M919 using xda app-developers app
kevinrubio1 said:
Oh my bad! Is noop better than row?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
If I remember right noop puts all in an equal queue whereas row prioritizes accessing info over creating it.
Sent from my GT-I9505 using xda app-developers app
rockstarar said:
If I remember right noop puts all in an equal queue whereas row prioritizes accessing info over creating it.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Any more suggestions?
I'm running ktoonsez preferred settings
General Screen
governor = ktoonservativeq
scheduler = noop
Min Mhz = 189
Max Mhz = 1998
Voltage Screen
UV'd 50mv
Extras Screen
Screen OFF Profile Mhz = 486
Disable Screen Off Mhz Call = Enabled
Screen OFF Profile Sched = noop
GPU Max Mhz = 504
Screen OFF GPU Max Mhz = 200
Internal Read Ahead = 3072
External Read Ahead = 3072
General -> Governor Adjustments Screen
touch_boost_cpu = 1242
sampling_rate_screen_off = 90000
ALL THE REST ARE STOCK
Sent from my SGH-M919 using xda app-developers app
kevinrubio1 said:
Any more suggestions?
I'm running ktoonsez preferred settings
General Screen
governor = ktoonservativeq
scheduler = noop
Min Mhz = 189
Max Mhz = 1998
Voltage Screen
UV'd 50mv
Extras Screen
Screen OFF Profile Mhz = 486
Disable Screen Off Mhz Call = Enabled
Screen OFF Profile Sched = noop
GPU Max Mhz = 504
Screen OFF GPU Max Mhz = 200
Internal Read Ahead = 3072
External Read Ahead = 3072
General -> Governor Adjustments Screen
touch_boost_cpu = 1242
sampling_rate_screen_off = 90000
ALL THE REST ARE STOCK
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
You're lucky you can handle that. My phone reboots. Nothing else I can think of boss
Sent from my GT-I9505 using xda app-developers app
rockstarar said:
You're lucky you can handle that. My phone reboots. Nothing else I can think of boss
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Actually I've been getting a few reboots but I wasn't sure what was causing them
Sent from my SGH-M919 using xda app-developers app
Try loading and applying stock table. Eh but if they're few and far between then personally idc. But that might be the cause. That is if your ROM kernel combo is rock solid, etc. Could be your phone has the chip of a lion and a crappy kernel or ROM is causing reboots
Sent from my GT-I9505 using xda app-developers app
rockstarar said:
Try loading and applying stock table. Eh but if they're few and far between then personally idc. But that might be the cause. That is if your ROM kernel combo is rock solid, etc. Could be your phone has the chip of a lion and a crappy kernel or ROM is causing reboots
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thanks! I guess i won't change anything since the reboots aren't close together, I have been noticing my apps have been force closing more than usual
Sent from my SGH-M919 using xda app-developers app
Doing -25 across the board instead of -50 might stop the reboots for ya.