SetCPU undoing GPU over clock? - Samsung Galaxy Nexus

Using nenamark2 as a test when I normally test I get in the 26-27 FPS range using leankernal however opening and or setting any clocks in setcpu will lower my score to no more than 20.5 FPS.
Sent from my GalaxyNexus using XDA App

staticx57 said:
Using nenamark2 as a test when I normally test I get in the 26-27 FPS range using leankernal however opening and or setting any clocks in setcpu will lower my score to no more than 20.5 FPS.
Sent from my GalaxyNexus using XDA App
Click to expand...
Click to collapse
By setting any clocks, do you mean raising the maximum clockspeed? Testing has shown that overclocking to 1.3 or 1.42GHz can actually harm performance on some SGNs.

No, I mean any changes. Even setting it to 1200 MHz will cause the performance hit.
Sent from my GalaxyNexus using XDA App

Related

Minimum clock freq.

What is a good setting to set my minimum clock frequency.. the highest i put it to is usually the default 1.5 or underclock it just by a bit to 1.4... but what should i set the minimum to?
I know the lowest is best for battery, but that means the phone will be performing at those low frequencies as well and might slow it down a little bit.
The lowest option i have is 384 mhz then 486, 594, 702, 810, 918, 1.026, 1.134, 1.242, 1.35, 1.458, 1.512, 1.556, 1.62, 1.674, 1.728, 1.782, and 1.836.
I keep mine at the lowest setting. No problems.
Sent from my SGH-T999 using xda premium
Usually at 486 for me
Sent from my SGH-T999 using xda premium

[Q] Voltage settings

Just curious to see what voltage settings people were using in conjunction with joker's kernel. Screen shots? Post? Whatever. I'm interested!
Sent from my LG-LS970 using xda app-developers app
I'm -50 undervolt a running good. No random reboots or anything. Even played Dead Trigger for an hour and all good. I am also running at 1.62 overclock. All is good.
-Frank
Running 25 under and still good. I'll probably overclock it to get better performance.
frankt2012 said:
I'm -50 undervolt a running good. No random reboots or anything. Even played Dead Trigger for an hour and all good. I am also running at 1.62 overclock. All is good.
-Frank
Click to expand...
Click to collapse
I assume you are -50 on just the highest clock setting?
Sent from my LG-LS970 using xda app-developers app
JeauxAdam said:
I assume you are -50 on just the highest clock setting?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
No -50 on all clock speeds. I use faux123 from the market. I was running -25 then just bumped it down some more. Might try -75 soon.
-Frank

Gpu overclock

Hello
I'm currently using a note2core asylum kernel which supports both cpu and gpu overclocking. My question is, how do I go about overclocking the gpu? Any help will be appreciated.
Sent from my GT-N7100 using xda app-developers app
Don't need that overclock note 2 is an excellent phone more than a phone...my oppinion
Sent from my GT-N7100 using xda app-developers app
I know. Its all for.research purposes anyway
Sent from my GT-N7100 using xda app-developers app
I'm not sure if note2core supports stweak but that's the app you need to over clock. There are other but I prefer this one. It will give you a maximum slide to 1800mhz and also tons of other features such as adjusting charging amp, under volting including for the gpu as well. There's not much to know about over clocking as its pretty straight forward but you can change the xpu governor and the number of cores you want activated and how you want them to activate based on your usage. Under volting will help with both temperature and battery life although I find the changes almost insignificant, but you should try it out. If you want to undervolt start with around - 25mv.
Sent from the rabbit hole.
You are talking about cpu not gpu
Sent from my GT-N7100 using xda app-developers app
Okay it's not that different. Just over clock it and undervolt at the same time to - 25mv and then download an app called stabilitytest from play store. Run it for 10minutes and see if you get any error. If not then further lower the voltage to - 50mv. But usually - 25 is good. I noticed that anything higher clocks peed than 5xxmhz starts causing error and graphic glitches.
Sent from the rabbit hole.
Tried it. Note2core not supported
Sent from my GT-N7100 using xda app-developers app

A CPU question

I want to over clock my phone and under clock it when I'm not using it to save battery life is there anyway to do this I've tried a few apps and they didn't do much
What is the lowest clock rate for the phone bc on the apps it puts it at 384
Thanks for the help
Sent from my SGH-T999 using xda app-developers app
re: cpu
dougie1792 said:
I want to over clock my phone and under clock it when I'm not using it to save battery life is there anyway to do this I've tried a few apps and they didn't do much
What is the lowest clock rate for the phone bc on the apps it puts it at 384
Thanks for the help
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
The lowest safe rate would be 384 but you would be a lot better off
to get the "JuiceDefender" app from the play store.
It has a lot of features including auto cpu frequency and you can set it up
so it automatically handles all options needed for the very best battery
savings modes without sacrificing performance...
My personal opinion which is not worth much is NOT to mess with
manually over clocking, under clocking or volting but instead use a
true and tried app like JuiceDefender to do all the work for you.
Check it out at the play store.
Thanks I'll try it out
Sent from my SGH-T999 using xda app-developers app
Hey i got a question about CPU. Im running wicked rom with Deviant Kernel. My max and min freq keep changing. My kernel allows me to overclock to 1944 but i set it to 1620 and min at384. im using smartsassv2 and cfq but it keeps making my maximum 1350. no matter what i change the gov. to or the max. I reinstalled rom and and the kernel seperate. to see if it would make a differecne and same results. Please Please Please help me fix this
I'm not an expert but I think I can some what help you. Are you toggling the set on boot?
Sent from my SGH-T999 using xda app-developers app
You need to install a custom kernel and possibly a custom ROM.
Then you can overclock/underclock to what your kernel supports.
I've seen kernels that allow min at 94 and max at 1944.
transmitted from my SGH-T999.

Underclocking while gaming

Some app is underclocking my cpu speed while in the middle of a game and it causes lag! Please help me to disable it!
Sent from my LT26i using XDA Premium 4 mobile app
Your CPU is overheating and it lowers the freq to make sure that your phone won't become a toast.
yUlekk said:
Your CPU is overheating and it lowers the freq to make sure that your phone won't become a toast.
Click to expand...
Click to collapse
That's sucks!
Sent from my LT26i using XDA Premium 4 mobile app
same problem
i under volt and underclock just enough so i still have performance but not too lagy
just to stop heat
Sent from my LT26i using XDA Premium 4 mobile app
U may actually consider undrclock yourself when gaming
because most games depends more on your GPU than CPU (like real racing 3)
underclocking will slower the cpu a bit, but u wont overheat that fast
so u can do gaming smoothly for longer time actually
if u have unlocked the bootloader and got a kernel that support GPU overclock, consider overclock the GPU but maybe underclock cpu

Categories

Resources