Hey all. I bought this also last night and I really like it. Phone seems much smoother then with set cpu. My concern is when I set the clock speed, I apply them to run on init.d. But when I open the app to check the settings it shows my minimum speed as high as my maximum speed. But if I go to the voltage settings then back to the cpu settings its fine. My minimum and maximum speeds are fine. It shows both maxed out when I first open the app. I just don't want my cpu full bore all the time. Thanks.
Sent from my SGH-T989 using xda premium
Bump for some help
Sent from my SGH-T989 using xda premium
I think what you are seeing is actually the Max of each core, not the min/max.
Sent from my SGH-T989 using XDA App
Also to whenever your changing speeds in system tuner after you set the desired speeds click on the kernel tab at the bottom and click on file that's says "mpdecision " and kill it, this ensures that both cpu will come back on line as the adjusted speeds you set
I stand corrected. The top slider is Max, bottom is min
Sent from my SGH-T989 using XDA App
You could also try and use Fauxclock for setting OC speeds and a screen off profile and just use System Tuner for UV and SD tweaks. This has been my combo and it works wonders.
Theonlyblackju said:
You could also try and use Fauxclock for setting OC speeds and a screen off profile and just use System Tuner for UV and SD tweaks. This has been my combo and it works wonders.
Click to expand...
Click to collapse
Wow. I never thought of doing that. I would think they would work against each other. I may do that. Thanks
Sent from my SGH-T989 using xda premium
Hey guys, i got cyanogen mod 7.2 installed on my phone, and whenever i tried to change the max cpu speed from the settings, it would now work after boot. Most of the market programs i use freeze as soon as i try to apply my changes. I got "No-frills Cpu control" to work once, so i made it 844 max clock speed. (I confirm using android system info app"). EDIT: after another frozen reboot, the clock speed has gone back down to 787 again -_- . So frustrating!!
So i was wondering, which app do you use to overclock your gio that doesnt freeze?
AlwaysDroid said:
Hey guys, i got cyanogen mod 7.2 installed on my phone, and whenever i tried to change the max cpu speed from the settings, it would now work after boot. Most of the market programs i use freeze as soon as i try to apply my changes. I got "No-frills Cpu control" to work once, so i made it 844 max clock speed. (I confirm using android system info app"). EDIT: after another frozen reboot, the clock speed has gone back down to 787 again -_- . So frustrating!!
So i was wondering, which app do you use to overclock your gio that doesnt freeze?
Click to expand...
Click to collapse
you need to tick "set when boot" setting.
中国人正在尝试提高！
(translation:Chinese people are trying to improve themselves！)
AlwaysDroid said:
Hey guys, i got cyanogen mod 7.2 installed on my phone, and whenever i tried to change the max cpu speed from the settings, it would now work after boot. Most of the market programs i use freeze as soon as i try to apply my changes. I got "No-frills Cpu control" to work once, so i made it 844 max clock speed. (I confirm using android system info app"). EDIT: after another frozen reboot, the clock speed has gone back down to 787 again -_- . So frustrating!!
So i was wondering, which app do you use to overclock your gio that doesnt freeze?
Click to expand...
Click to collapse
set your cpu, mark the set on boot, reboot it
Sent from my GT-S5660 using Tapatalk 2 Beta-2
AlwaysDroid said:
Hey guys, i got cyanogen mod 7.2 installed on my phone, and whenever i tried to change the max cpu speed from the settings, it would now work after boot. Most of the market programs i use freeze as soon as i try to apply my changes. I got "No-frills Cpu control" to work once, so i made it 844 max clock speed. (I confirm using android system info app"). EDIT: after another frozen reboot, the clock speed has gone back down to 787 again -_- . So frustrating!!
So i was wondering, which app do you use to overclock your gio that doesnt freeze?
Click to expand...
Click to collapse
chris_toni said:
set your cpu, mark the set on boot, reboot it
Sent from my GT-S5660 using Tapatalk 2 Beta-2
Click to expand...
Click to collapse
Use set cpu..
U can set diff profile w/ that
@wiwid_colgate
Galaxy Gio S5660
#GalaxyICS
Best app for my Gio is Antutu CPU Master.
Set your overclock, thick set on boot and reboot your phone!
Alright, so i got my max set to 864 and min to 245, and while im using it i get a bunch of random reebots every 3 min, and one sleep of death where it wont wake up unless you pull battery -_-. Using built in overclock still
AlwaysDroid said:
Alright, so i got my max set to 864 and min to 245, and while im using it i get a bunch of random reebots every 3 min, and one sleep of death where it wont wake up unless you pull battery -_-. Using built in overclock still
Click to expand...
Click to collapse
Try to decrease the max profile...
@wiwid_colgate
Galaxy Gio S5660
#GalaxyICS
Note that every clock speed your device can handle is different, just try out wich is stable for you
Sent from my GT-S5660 using xda premium
use set cpu.set max 844 is good for gio then tick "set on boot"
I feel that the Smartassv2 cpu profile consumes more battery than the On demand one. Anyone here think the opposite?
Sent from my GT-S5660 using XDA
khanhtrinh said:
I feel that the Smartassv2 cpu profile consumes more battery than the On demand one. Anyone here think the opposite?
Sent from my GT-S5660 using XDA
Click to expand...
Click to collapse
Possible. But smartass also gives more performance than ondemand governor
Sent from my GT-S5660 using xda premium
voetbalremco said:
Possible. But smartass also gives more performance than ondemand governor
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
I'll have to try that, I am using on-demand currently
Which is the best governor for gaming performance?
Performance or smartass v2
Sent from my GT-S5660 using xda premium
For performance the best governor is "performance". It causes that processor overclocking is always the highest. It means that if you have overclcked processor at 921MHz, with this governor phone will always work at 921MHz. But don't use it, it drains battery as hell
The best governor for daily use is SmartassV2, because it's balance between performance and battery
And sorry for my English :|
Na szczęście jest TapaTalk
which 1 is best for daily uses????
i am using smartassv2 but sometimes my phone becomes very very slow takes 1mint to slide the status bar phone apps etc.....
what is i/o schedular??? is it effect the speed?? which 1 is best???
Now I just use the On demand governor. Smartassv2 drains my battery pretty fast
Sent from my GT-S5660 using XDA
mnhs1010 said:
which 1 is best for daily uses????
i am using smartassv2 but sometimes my phone becomes very very slow takes 1mint to slide the status bar phone apps etc.....
what is i/o schedular??? is it effect the speed?? which 1 is best???
Click to expand...
Click to collapse
any 1 answer me plz????????
fittono
Yup,any overclock will drain your battery quicker,this is very logical as you consume more power,right?I use No Frills CPU control,and i have my galaxy Gio set to 921 Mhz....! It realy works like asmall little pocket rocket now...I was already very satisfied with the price/performance ratio of this cheap little phone,but now with this stable OC it really hits it out of the park!!!No complaints from me about this phone..I'm gonna try and achieve an even higher oc,but it's really not a must,just want to know how far i can push it.No Frills has a benchmarker impemented ,very handy.
khanhtrinh said:
I feel that the Smartassv2 cpu profile consumes more battery than the On demand one. Anyone here think the opposite?
Sent from my GT-S5660 using XDA
Click to expand...
Click to collapse
That's true. But smartass is just like balance between perfomance and battery drain, which makes it the best governor
I'm having trouble finding a CPU app that works perfectly with this phone. I've tried setcpu, CPU master, system tuner, and nstools. What's everyone using to oc this thing?
Sent from my SGH-T989 using xda premium
Depends on which rom your running but in general...you should use none. Most roms already uv and oc and if u use an app it'll butt heads.
Sent from my SGH-T989 using XDA
My issue is that it seems like my phone is skipping steps all over the place. I'm using cpuspy and the usage jumps between Max/min clocks. I'm kinda not digging that. Its the same with every rom i flash.
Sent from my SGH-T989 using xda premium
RushAOZ said:
My issue is that it seems like my phone is skipping steps all over the place. I'm using cpuspy and the usage jumps between Max/min clocks. I'm kinda not digging that. Its the same with every rom i flash.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
That's not an issue with your cpu app. It has to do with your governor (the thing that controls how your CPU scales). Most ROMs come with ondemand by default which pretty much does exactly that, which is jump from min to max as needed. If you want something that scales more, you should look at conservative (for better battery life) or lagfree/interactive (for better performance). Lagfree/interactive are only available on select kernels though (whereas conservative is almost universally available). Streamline definitely has them and I think synergy does too.
Also CPU apps don't butt heads with the ROM/kernel default settings, it just overrides the default settings.
Yea I figured that but this is the first phone I've had where on demand performs that way. I've had a nexus s, epic 4g, evo, and a g2 and they all scaled across the steps ondemand. Ondemand on this phone works like the min/max governor. But your right conservative scales across the steps well. Just a bit choppier. About to install nstools and mess with the threshholds and whatnot.
Sent from my SGH-T989 using xda premium
Im currently on JMT v9, and want to lower my max CPU to 1512Mhz. Ive tried using the included Voltage Control Lite...slide my max freq down to 1512, then hit apply changes. Ive also tried using AnTuTu CPU Master Free...again, slide max down to 1512 and hit Apply. Also set it to apply upon reboot, which I have done, and it goes back to 1728.
Any ideas?
Faux kernel? Download CPU spy. I'm on clones drones, although set CPU doesn't show the changed Max freq, CPU spy shows the phone never goes above what I've set. If that makes sense
Sent from my SGH-T989 using xda premium
Your thread title says under volt but it appears you want to underclock. Try system tuner or ROM toolbox.
Rod3 said:
Your thread title says under volt but it appears you want to underclock. Try system tuner or ROM toolbox.
Click to expand...
Click to collapse
Yes underclock my bad.
Tried system tuner, pulled the slider down to 1512 and it pops right back to 1728 lol
Sent from my SGH-T989 using xda app-developers app
Well i just read in the jmt thread this may be an issue with the kernel...others can't set at 1510 either. 1458 works tho
Sent from my SGH-T989 using xda app-developers app
Hello
I'm currently using a note2core asylum kernel which supports both cpu and gpu overclocking. My question is, how do I go about overclocking the gpu? Any help will be appreciated.
Sent from my GT-N7100 using xda app-developers app
Don't need that overclock note 2 is an excellent phone more than a phone...my oppinion
Sent from my GT-N7100 using xda app-developers app
I know. Its all for.research purposes anyway
Sent from my GT-N7100 using xda app-developers app
I'm not sure if note2core supports stweak but that's the app you need to over clock. There are other but I prefer this one. It will give you a maximum slide to 1800mhz and also tons of other features such as adjusting charging amp, under volting including for the gpu as well. There's not much to know about over clocking as its pretty straight forward but you can change the xpu governor and the number of cores you want activated and how you want them to activate based on your usage. Under volting will help with both temperature and battery life although I find the changes almost insignificant, but you should try it out. If you want to undervolt start with around - 25mv.
Sent from the rabbit hole.
You are talking about cpu not gpu
Sent from my GT-N7100 using xda app-developers app
Okay it's not that different. Just over clock it and undervolt at the same time to - 25mv and then download an app called stabilitytest from play store. Run it for 10minutes and see if you get any error. If not then further lower the voltage to - 50mv. But usually - 25 is good. I noticed that anything higher clocks peed than 5xxmhz starts causing error and graphic glitches.
Sent from the rabbit hole.
Tried it. Note2core not supported
Sent from my GT-N7100 using xda app-developers app