Your ktoonsez kernel settings? - T-Mobile Samsung Galaxy S 4
What are your best ktoonsez kernel settings in ktweaker?
Sent from my SGH-M919 using xda app-developers app
kevinrubio1 said:
What are your best ktoonsez kernel settings in ktweaker?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
General Screen
governor = ktoonservativeq
scheduler = row Or zen
Min Mhz = 189
Max Mhz = 1998
Voltage Screen
UV'd 70mv across the board
Extras Screen
Screen OFF Profile Mhz = 486
Disable Screen Off Mhz Call = Enabled
Screen OFF Profile Sched = noop
GPU Max Mhz = 627
Screen OFF GPU Max Mhz = 200
Internal Read Ahead = 3072
External Read Ahead = 3072
mDNIe Background Mode = Dynamic
Trinity Colors = Cool
General -> Governor Adjustments Screen
touch_boost_cpu = 1242
sampling_rate_screen_off = 90000
ONLY IF USING ZEN:
General -> I/O Scheduler Adjustments Screen
async_expire = 2500
fifo_batch = 0
sync_expire = 300
Everything else is the default value.
Monkz said:
General Screen
governor = ktoonservativeq
scheduler = row Or zen
Min Mhz = 189
Max Mhz = 1998
Voltage Screen
UV'd 70mv across the board
Extras Screen
Screen OFF Profile Mhz = 486
Disable Screen Off Mhz Call = Enabled
Screen OFF Profile Sched = noop
GPU Max Mhz = 627
Screen OFF GPU Max Mhz = 200
Internal Read Ahead = 3072
External Read Ahead = 3072
mDNIe Background Mode = Dynamic
Trinity Colors = Cool
General -> Governor Adjustments Screen
touch_boost_cpu = 1242
sampling_rate_screen_off = 90000
ONLY IF USING ZEN:
General -> I/O Scheduler Adjustments Screen
async_expire = 2500
fifo_batch = 0
sync_expire = 300
Everything else is the default value.
Click to expand...
Click to collapse
Thanks! Is this for performance or battery? Or balanced between them both?
Sent from my SGH-M919 using xda app-developers app
kevinrubio1 said:
Thanks! Is this for performance or battery? Or balanced between them both?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Balanced with Row, Zen to edge more for Performance at the cost of a bit of battery life.
General Screen
governor = ktoonservativeq
scheduler = row
Min Mhz = 189
Max Mhz = 1998
Voltage Screen
UV'd 50mv
Extras Screen
Screen OFF Profile Mhz = 486
Disable Screen Off Mhz Call = Enabled
Screen OFF Profile Sched = noop
GPU Max Mhz = 504
Screen OFF GPU Max Mhz = 200
Internal Read Ahead = 3072
External Read Ahead = 3072
General -> Governor Adjustments Screen
touch_boost_cpu = 1134
sampling_rate_screen_off = 90000
ALL THE REST ARE STOCK
What about best battery life settings?
Sent from my SGH-M919 using xda app-developers app
kevinrubio1 said:
What about best battery life settings?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
It depends on how much you want to slow down your phone really. The ones posted above are pretty much be best balance between performance and battery life you will get. Much faster than on stock, and uses less battery. But you can disable cores and underclock and play with other governors, but when your running a kernel that already gives better battery life and faster performance than stock, why would you bother changing that?
Monkz said:
It depends on how much you want to slow down your phone really. The ones posted above are pretty much be best balance between performance and battery life you will get. Much faster than on stock, and uses less battery. But you can disable cores and underclock and play with other governors, but when your running a kernel that already gives better battery life and faster performance than stock, why would you bother changing that?
Click to expand...
Click to collapse
True! Thanks I'll try your settings and see if my battery gets better
Sent from my SGH-M919 using xda app-developers app
how are you guys able to overclock? everytime i try to my phone reboots itself
Different chips are different. I always preferred noop for I/o
Sent from my GT-I9505 using xda app-developers app
rockstarar said:
Different chips are different. I always preferred noop for I/o
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Noop instead of ktoonservativeq?
Sent from my SGH-M919 using xda app-developers app
kevinrubio1 said:
Noop instead of ktoonservativeq?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Noop is a scheduler and ktoonservativeq is a governor.
whytechapel_x said:
Noop is a scheduler and ktoonservativeq is a governor.
Click to expand...
Click to collapse
Oh my bad! Is noop better than row?
Sent from my SGH-M919 using xda app-developers app
kevinrubio1 said:
Oh my bad! Is noop better than row?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
If I remember right noop puts all in an equal queue whereas row prioritizes accessing info over creating it.
Sent from my GT-I9505 using xda app-developers app
rockstarar said:
If I remember right noop puts all in an equal queue whereas row prioritizes accessing info over creating it.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Any more suggestions?
I'm running ktoonsez preferred settings
General Screen
governor = ktoonservativeq
scheduler = noop
Min Mhz = 189
Max Mhz = 1998
Voltage Screen
UV'd 50mv
Extras Screen
Screen OFF Profile Mhz = 486
Disable Screen Off Mhz Call = Enabled
Screen OFF Profile Sched = noop
GPU Max Mhz = 504
Screen OFF GPU Max Mhz = 200
Internal Read Ahead = 3072
External Read Ahead = 3072
General -> Governor Adjustments Screen
touch_boost_cpu = 1242
sampling_rate_screen_off = 90000
ALL THE REST ARE STOCK
Sent from my SGH-M919 using xda app-developers app
kevinrubio1 said:
Any more suggestions?
I'm running ktoonsez preferred settings
General Screen
governor = ktoonservativeq
scheduler = noop
Min Mhz = 189
Max Mhz = 1998
Voltage Screen
UV'd 50mv
Extras Screen
Screen OFF Profile Mhz = 486
Disable Screen Off Mhz Call = Enabled
Screen OFF Profile Sched = noop
GPU Max Mhz = 504
Screen OFF GPU Max Mhz = 200
Internal Read Ahead = 3072
External Read Ahead = 3072
General -> Governor Adjustments Screen
touch_boost_cpu = 1242
sampling_rate_screen_off = 90000
ALL THE REST ARE STOCK
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
You're lucky you can handle that. My phone reboots. Nothing else I can think of boss
Sent from my GT-I9505 using xda app-developers app
rockstarar said:
You're lucky you can handle that. My phone reboots. Nothing else I can think of boss
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Actually I've been getting a few reboots but I wasn't sure what was causing them
Sent from my SGH-M919 using xda app-developers app
Try loading and applying stock table. Eh but if they're few and far between then personally idc. But that might be the cause. That is if your ROM kernel combo is rock solid, etc. Could be your phone has the chip of a lion and a crappy kernel or ROM is causing reboots
Sent from my GT-I9505 using xda app-developers app
rockstarar said:
Try loading and applying stock table. Eh but if they're few and far between then personally idc. But that might be the cause. That is if your ROM kernel combo is rock solid, etc. Could be your phone has the chip of a lion and a crappy kernel or ROM is causing reboots
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thanks! I guess i won't change anything since the reboots aren't close together, I have been noticing my apps have been force closing more than usual
Sent from my SGH-M919 using xda app-developers app
Doing -25 across the board instead of -50 might stop the reboots for ya.
Related
Minimum clock freq.
What is a good setting to set my minimum clock frequency.. the highest i put it to is usually the default 1.5 or underclock it just by a bit to 1.4... but what should i set the minimum to? I know the lowest is best for battery, but that means the phone will be performing at those low frequencies as well and might slow it down a little bit. The lowest option i have is 384 mhz then 486, 594, 702, 810, 918, 1.026, 1.134, 1.242, 1.35, 1.458, 1.512, 1.556, 1.62, 1.674, 1.728, 1.782, and 1.836.
I keep mine at the lowest setting. No problems. Sent from my SGH-T999 using xda premium
Usually at 486 for me Sent from my SGH-T999 using xda premium
CPU core spikes
Hey my CPU cores keep going to 1.9ghz making my phone hot. I'm on deviant kernel 7 hypedrive rsl12. I have it on Pegasus and zen I/o scheduler and max set to 1.5 and min to 192mhz please help its killing my battery. Sent from my SGH-I747 using xda premium
Flash another kernel, change your governors, under volt, underclock. Have you tried any of those? Also make sure no other apps are messing with your processor speed, or certain setting applied at boot. Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Enable CPU power saving in settings. This would limit max speed to 1.26. Sent from my SAMSUNG-SGH-I747 using xda premium
CPU
I don't know the difference between underclocking and undervolting but I set down my CPU to try and increase battery life but I don't know how much to put it down. I the default max was 1512 and the minimum was 300 something. Screen off I have a 500 Mac and 300 min. Other times I have a 100 minimum and 1200 max. Can I lower it? Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Best Elementals kernel settings?
I'm thinking of flashing elementalx kernel but I would like to know the best settings for it before I flash it Sent from my Nexus 7 using xda app-developers app
travster119 said: I'm thinking of flashing elementalx kernel but I would like to know the best settings for it before I flash it Sent from my Nexus 7 using xda app-developers app Click to expand... Click to collapse I don't know about best. That's definitely a question that will generate many different answers. These are my settings and they work well for me but they are also fairly conservative. By no means am I trying to get the highest benchmark scores. And of course the same settings will not produce the same results on every device. I should mention that I don't use sweep2wake or doubletap2wake, They will to some extent lower battery life. Set CPU core separately = no Cpu overclock to 1620 MHz L2 cache and bus bandwidth = ElementalX Auto Undervolting = 850 min Thermal setting = run hot. Mine never gets very hot but then I don't do a ton of gaming. GPU overclock = 450 MHz GPU governor = ondemand Cpu governor set to stock ondemand. With ElementalX governor I was seeing a slight stutter running quadrant. Gboost = I am not using. Enabled max screen off frequency. Enabled USB fastcharge. Disabled magnetic on/off. Tablet is naked, no cover. Again, those are the settings that I'm using and they are admittedly conservative. Not using any apps like setcpu, kernel tuner or trickster. Don't forget to make a backup first.
Ok thanks, will give it a shot, thanks again Sent from my Nexus 7 using xda app-developers app
Intel CPU Governor
Could anyone please give me more info about this governor. I can't seem to find anything on Google. Only that it is a interactive based governor and is optimized for Intel chipsets. I've been using this governor for almost a week now and am pleased with the performance. I see that it has been included in the latest XOSP and also RR builds. What do you guys think which governor is better for our device interactive ? Intel ?
Personally, i use interactive and yankactive.
what is the best kernel or rom that has a good battery life? I understand that the mobile network consumes battery but my crossed the line, not enough to last even 3 hours, and is already at 15%...
If you use The Octo kernel, you could under clock to 1.2 and 1.3 and enable alucard Governor to have two or one core active and having Barry_Allen enabled Sent from my ASUS_Z008 using XDA-Developers mobile app
troy5890 said: If you use The Octo kernel, you could under clock to 1.2 and 1.3 and enable alucard Governor to have two or one core active and having Barry_Allen enabled... Click to expand... Click to collapse Hi, Pls, tell me what does it mean "...under clock to 1.2 and 1.3..."? Min. and Max CPU frequency? And, what is Barry_Allen and where to find it?
dessert69 said: Hi, Pls, tell me what does it mean "...under clock to 1.2 and 1.3..."? Min. and Max CPU frequency? And, what is Barry_Allen and where to find it? Click to expand... Click to collapse Maximum frequency: 1250 MHz Minimum frequency: 333 MHz CPU governor: Barry_Allen Go to kernel auditor, swipe left, go to CPU and the configurations should be there. Click on CPU governor and scroll down to Barry_Allen and select it. Be careful, it can be really conservative. Enjoy! Sent from my ASUS_Z008 using XDA-Developers mobile app
troy5890 said: Maximum frequency: 1250 MHz Minimum frequency: 333 MHz CPU governor: Barry_Allen Go to kernel auditor, swipe left, go to CPU and the configurations should be there. Click on CPU governor and scroll down to Barry_Allen and select it. Be careful, it can be really conservative. Enjoy! Click to expand... Click to collapse Right, thanks.
troy5890 said: Maximum frequency: 1250 MHz Minimum frequency: 333 MHz CPU governor: Barry_Allen Go to kernel auditor, swipe left, go to CPU and the configurations should be there. Click on CPU governor and scroll down to Barry_Allen and select it. Be careful, it can be really conservative. Enjoy! Sent from my ASUS_Z008 using XDA-Developers mobile app Click to expand... Click to collapse Yep, Barry Allen is the faster human alive, but in the series, there is a faster enemy every chapter. Conservative. lol About Intel governor, I remember I read something about Intel capatibilities to manage voltages more efficiently (undervolting at lower freqs) but I couldn't find any confirmation of this.
Dan_Jacques said: Yep, Barry Allen is the faster human alive, but in the series, there is a faster enemy every chapter. Conservative. lol About Intel governor, I remember I read something about Intel capatibilities to manage voltages more efficiently (undervolting at lower freqs) but I couldn't find any confirmation of this. Click to expand... Click to collapse Exactly ? I think the Intel governor takes advantage of the powerclamps for more efficiency. It can be a performance type or Governor, but can be good on battery. Sent from my ASUS_Z008 using XDA-Developers mobile app
Soooooo Barry-allen or Intel?~
nijihana said: Soooooo Barry-allen or Intel?~ Click to expand... Click to collapse Barry-allen for a very conservative experience and Intel for a good performance and balanced battery Sent from my ASUS_Z008 using XDA-Developers mobile app
troy5890 said: Barry-allen for a very conservative experience and Intel for a good performance and balanced battery Sent from my ASUS_Z008 using XDA-Developers mobile app Click to expand... Click to collapse Soooo TheSSJActive or Intel~?
nijihana said: Soooo TheSSJActive or Intel~? Click to expand... Click to collapse Depends on your usage. Ssjactive: I would use for multimedia and browsing. It will also act as a conservative governor but will ramp up the frequency with other activity. Intel: I would use for games and almost for anything. You'll be able to not have to worry about the performance at the cost of battery. Sent from my ASUS_Z008 using XDA-Developers mobile app
troy5890 said: Depends on your usage. Ssjactive: I would use for multimedia and browsing. It will also act as a conservative governor but will ramp up the frequency with other activity. Intel: I would use for games and almost for anything. You'll be able to not have to worry about the performance at the cost of battery. Sent from my ASUS_Z008 using XDA-Developers mobile app Click to expand... Click to collapse Hello hello again! Intel or Frankenstein~?
nijihana said: Hello hello again! Intel or Frankenstein~? Click to expand... Click to collapse Try Intel