Hi everybody
I have a serious problem on my HTC desire
I have a HTC desire which dont want mount sdcard
I test with fastboot oem enableqxdm 0 and fastboot oem eraseconfig but still wont mount sdcard
I plug my HTC Desire to my PC and under cmd I do : fastboot flash hboot hboot_2.16.0001.img
My HTC desire never power on after this hboot
My HTC is recognized by my computer when I do : fastboot devices
I do : fastboot flash hboot bravo_alphaspl.img but I have an error : FAILED < remote : signature verify >
Please help me I cant flash again hboot
Thank you
Well.. You are s-on now. Try flashing the 2.3 ruu.
ur device never turn on after this hboot because that hboot is for the HTC evo 4g
Thanks for your respons
I have a black screen, I can only put fastboot mode
I put the fastboot mode on my HTC and I launch RUU_HTC Desire Android 2.3 Upgrade (Gingerbread).exe on my computer
The software detect my phone but is "Waiting for Bootloader" and the software says that there are an usb connection error
Any ideas please ?
You need a bootloader, but you have the wrong one, and you can't flash one. I call this a brick.
Next time, be sure that what you're flashing is made for your phone.
There is no solution to repair this ?
can uget into bootloader? volume down + power. if so u can try the 2.3 ruu as PB99IMG. worth a shot
When I do vol- + power I have also a black screen but Its detected by my computer
And then I do
fastboot flash hboot bravo_alphaspl.img on cmd
I have an error about signature verify fail
Phaeton92 said:
When I do vol- + power I have also a black screen but Its detected by my computer
And then I do
fastboot flash hboot bravo_alphaspl.img on cmd
I have an error about signature verify fail
Click to expand...
Click to collapse
u s-off?
It was s-off before this problem but maybe now is s-on
I launch revoked but its not detect my phone
Phaeton92 said:
It was s-off before this problem but maybe now is s-on
I launch revoked but its not detect my phone
Click to expand...
Click to collapse
ok ur s-on so thats why u cant use fastboot to flash hboots.
now... download the 2.3gb upgrade as PB99IMG in abaaaabbbb63 sig, put it on ur sdcard (NOT in a folder) then put sdcard back in ur phone and press and hold volume down + power and wait 5 mins then press volume UP and then wait another 10 mins then press volume UP and pray ur phone boots up. good luck.
Ok thank you I will do that
Phaeton92 said:
Ok thank you I will do that
Click to expand...
Click to collapse
the chances of it working are probably not very good but because ur s-on then its the only option u have without taking it to a phone repair shop with JTAG. its worth a shot
The HTC desire dont boot up.
There is no another solution ? or there are only the riff jtag solution ?
Thank you a lot
Phaeton92 said:
The HTC desire dont boot up.
There is no another solution ? or there are only the riff jtag solution ?
Thank you a lot
Click to expand...
Click to collapse
Yh didnt think it would. U flashed the wrong hboot for ur device n thats a big no no and u corrupted ur bootloader so jtag is probably the only thing that could work.
jmcclue said:
Yh didnt think it would. U flashed the wrong hboot for ur device n thats a big no no and u corrupted ur bootloader so jtag is probably the only thing that could work.
Click to expand...
Click to collapse
There is no way to s-off with fastboot ?
sir i have a arise rowdy t1+ phone its board is sp6820gb_7620 and cpu id is 8810 cpu frequency is 1ghz and ram is 512mb with mali 300 gpu,
android version is 2.3.6 and kernal version is 2.6.35.7 [email protected]ecom-ubuntu #7, software version is mocordroid2.3.6.w12.20_p20.01_20130715.130506, hardware version is 1.1.0. my problem is that my phone has only 128 mb of internal memory and when i tried to edit vold.fstab to swap its memory with memory card it stopped detecting sd card when turned on but when in recovery mode sd is shown present, i think its very similar to karbonn a1+ in hardware and software part so can you please help me with my phone?
Related
i recive this Desir in Fastboot mode.
BRAVO PVT3 SHIP S-ON
HBOOT-0.92.0001
MICROP-052d
TOUCH PANEL-SYNT0101
RADIO-5.09.0020
Jul 23 2010,16:46:44
the phone doesnt power on only goe to Fastboot mode.
i format the memory card and put difant ROM ( Froyo_DeLite 1.1_DeOdexed.zip ) in it and want bootloader and it nt flashing it does nt show any zip file so i cannt flash it .
can some body help me here please.
i all ready used serch .
can some boady in this forum help me lpease.
yavar said:
i recive this Desir in Fastboot mode.
BRAVO PVT3 SHIP S-ON
HBOOT-0.92.0001
MICROP-052d
TOUCH PANEL-SYNT0101
RADIO-5.09.0020
Jul 23 2010,16:46:44
the phone doesnt power on only goe to Fastboot mode.
i format the memory card and put difant ROM ( Froyo_DeLite 1.1_DeOdexed.zip ) in it and want bootloader and it nt flashing it does nt show any zip file so i cannt flash it .
can some body help me here please.
i all ready used serch .
Click to expand...
Click to collapse
Is the phone rooted?
If so, boot into recovery and flash from there.
it want flash.how do i flash it can tell me how u do it .mybe im doing somthing wrong
If I'm not wrong, you're trying to flash from hboot? It's not possible. You have to boot into custom recovery which u get when you root.
Sent from my HTC Desire using XDA App
how do i do that can u tell me?
You have to boot into custom recovery which u get when you root
What's wrong with your space bar?
I'd like to help but you're not being very clear. In fastboot you can press vol down to select recovery and then press power to boot into recovery or load recovery image from your pc with the fastboot command.
Sent from my HTC
You can't flash another ROM from Fastboot. You need to root your phone first. Use UnrEVOked to do so.
If you already have rooted than use (in Fastboot menu) Volume Up & Down to select Recovery (you select it with Power button). When in recovery mode wipe data and cache and then "install zip from sdcard". When I say "zip" I mean "Custom-rom.zip"...
Sent using XDA app from my Desire
my HTC is in fast boot so i cannt use unrevoked .the fone does nt power on as soon as i press power the fone goes to fastboot.i all ready select RECOVERS in hboot but nothing hapenes the fone goes to resevery screen and nothing.i fomated memory card and put some Custom-rom.zip in it but is nt seen it. i trid to use RUU_Bravo_HTC_Europe_1[1].15.405.1_Radio_32.30.00.28U_4.05.00.11_release_121684.exe
RUU_Brav2_UK_1[1].20.207.1_Radio_32.36.00.28U_4.06.00.02_2_release_124865.exe
and the prosses goes tue haf way and it give me error say i need to use difrant ROM.
can some boday tell me how to get fone working out of fastboot.
how can i root my fone. i run unrevoked and than conact my fone to usb in fastboot. and the saft doesnt see the fone.
can u please tell me step by step.
can some boday please help me with this?
have you installed the HTC & adb drivers?
if not, install HTC sync, download the android SDK and copy
adb.exe
adbwinapi.dll
adbwinusbapi.dll
into system 32 (x86)/syswow 64 (x64) in your windows folder on your system drive.
yavar said:
i recive this Desir in Fastboot mode.
BRAVO PVT3 SHIP S-ON
HBOOT-0.92.0001
MICROP-052d
TOUCH PANEL-SYNT0101
RADIO-5.09.0020
Jul 23 2010,16:46:44
the phone doesnt power on only goe to Fastboot mode.
i format the memory card and put difant ROM ( Froyo_DeLite 1.1_DeOdexed.zip ) in it and want bootloader and it nt flashing it does nt show any zip file so i cannt flash it .
can some body help me here please.
i all ready used serch .
Click to expand...
Click to collapse
If think is better for you, to start over, run the official RUU for your phone, u can find it here in XDA, remember if u have an branded phone u must have a Gold card, then try and root the phone again, here´s a link to the latest WWE RUU : http://shipped-roms.com/shipped/Bra...00.32U_5.09.05.30_2_release_142828_signed.exe
then use unrevoked to root the phone...
hi yes i have branded phone. is TMobile uk.
[ u must have a Gold card, then try and root the phone again ]
the phone is in Fastboot and it does nt power on as soon as i preess power it goes to the boot mode.
what u mean i must have gold crad ?
yavar said:
hi yes i have branded phone. is TMobile uk.
[ u must have a Gold card, then try and root the phone again ]
the phone is in Fastboot and it does nt power on as soon as i preess power it goes to the boot mode.
what u mean i must have gold crad ?
Click to expand...
Click to collapse
I'm sorry but you have got to go read some of the stickes.
You obviously have no idea what you're doing and need guidance.
Go read the stickes. They will help.
And don't be afraid to try the Search function
[GUIDE] Turkeys' Ultimate Guide to Root v42 BETA - "100% More Noob Intelligence"
TL;DR
Phone was S-offed and rooted with Oxygen HBOOT.
Someone tried to run 2.3 RUU on it, Now its fudged.
I NEED this back up and working ASAP!
What's the problem.
More dtails please.
Bootloader infor for instance.
davebugyi said:
What's the problem.
More dtails please.
Bootloader infor for instance.
Click to expand...
Click to collapse
The boot loader was the official 2.3 and that was then S-OFFed with Revolutionary, that then had the Oxygen R2 HBOOT Partion table on it.
Now I ran the 2.3 update on the wrong phone.
The HBOOT Currently says Alpharev Oxygen r2
BRAVO PVT1 SHIP S-OFF
HBOOT-6.93.1002
MICROP-031d
TOUCH PANEL-SYNW0101
RADIO-4.06.00.00.02_2
Aug 10 2010 17:52:18
Then is just says RRU instead of the usual options
When I first turn it on, it shows a black screen with white HTC and 4 ! in triangles in the corner.
I've been told this is bad...
If I try to run the updater, it eventuaklly goes to recover mode and says its fixed but its not.
I get this on the desire screen
[1] RADIO_V2 OK
[2] SPLASH1 - OK
[3] RECOVERY - OK
[4] SPLASH2 - OK
[5] RADIO-CUST - OK
[6] BOOTLOADER - Bypassed
[7] USERDATA - OK
[8] SYSTEM - Fail-PU
[9] BOOT - ok
Partition update fail!
Update fail!
Maybe a full wipe helps. And it could be that you derooted your handy. In this case you had to run unrevoked again.
Good luck
If it help I made a NAND backup lastnight...
Va2.0 said:
Maybe a full wipe helps. And it could be that you derooted your handy. In this case you had to run unrevoked again.
Good luck
Click to expand...
Click to collapse
Well I cannot get my device to boot to android, effectively stuck on a broken HBOOT.
Bouncer5 said:
If it help I made a NAND backup lastnight...
Well I cannot get my device to boot to android, effectively stuck on a broken HBOOT.
Click to expand...
Click to collapse
Try running the RUU again. Btw, you need to have HTC Sync installed.
I have tried running it again. Just hits the same "error"
Bouncer5 said:
If it help I made a NAND backup lastnight...
Well I cannot get my device to boot to android, effectively stuck on a broken HBOOT.
Click to expand...
Click to collapse
U have the oxygen hboot, its too small for the stock gingerbread rom
Flash the downgrader hboot from alpharev.nl (otherwise the ruu CANT overwrite the alpharev oxygen hboot), then run the ruu
How do I go about flashing it? Everything seem pretty broke..
Any surely the RRU should be repartitioning the HBOOT to the correct size?
Bouncer5 said:
How do I go about flashing it? Everything seem pretty broke..
Click to expand...
Click to collapse
Nothing is broken..U have to read again alpharev.nl
Download from alpharev the file PB99IMG_downgrade.zip and following instruction:
http://alpharev.nl/
You can also download the corresponding PB99IMG zipfile, put it on your sdcard, and rename it to PB99IMG.zip. Then start the phone in HBOOT mode (VolDown+POWER) to flash the HBOOT without a PC.
Click to expand...
Click to collapse
It will ask u to apply the update, then accept it (volume keys to navigate, power button to confirm)
After that ur hboot can be overwritten by the ruu..and the ruu will work fine
The thing is I have already added the file to my SD Card. Now when I boot my phone, the VERY first thing it does is a black screen with HTC in white. and in the corners are 4 ! in triangles, The only way to see the HBOOT Screen from there is to connect a USB cable and unplug, on that screen I have no options to do anything!
I dont even have anything I can record a video on to show you, Arrrgh this is annoying. HTC would like money out of me for a "non-warranty issue"
Bouncer5 said:
The thing is I have already added the file to my SD Card. Now when I boot my phone, the VERY first thing it does is a black screen with HTC in white. and in the corners are 4 ! in triangles, The only way to see the HBOOT Screen from there is to connect a USB cable and unplug, on that screen I have no options to do anything!
I dont even have anything I can record a video on to show you, Arrrgh this is annoying. HTC would like money out of me for a "non-warranty issue"
Click to expand...
Click to collapse
Did u boot the phone in hboot? remove battery, plug again, press and hold volume down then press and hold also the power button..it should boot soon in the hboot and ask u for an update
Yes im positive, I have done it many many times before.
And what im getting here is not what you would normally get
HTCs customer support is terrible! Seriously do not want to be charged to get it fixed never mind a bloody shipping and handling fee!!
oh..i see..how about flash the hboot img (instead of the zip) with fastboot command?
Sure point me to what I need and where I can find it and I shall give that a try
Bouncer5 said:
Sure point me to what I need and where I can find it and I shall give that a try
Click to expand...
Click to collapse
Download this file http://forum.xda-developers.com/attachment.php?attachmentid=630611&d=1308537074
It contain a mininal set of files in order to use fastboot, without installing the android sdk
Then download this http://alpharev.nl/bravo_downgrade.img and put in the same extracted directory above..
Boot ur phone in hboot mode and plug the usb (u said with the usb plugged u see the hboot usb)..then from a command prompt from ur pc, go in the directory above and type: fastboot flash hboot bravo_downgrade.img
If that is successfull..u can run an ruu, and it should restore everything, even the hboot now!
Am I missing a trick I run it and it shows on screen for a split second.
And if it doesn't fix it?!
Nevermind think I remebered how to do it...
Bouncer5 said:
Am I missing a trick I run it and it shows on screen for a split second.
And if it doesn't fix it?!
Click to expand...
Click to collapse
At least try, its simple and fast..if that flash fails, will not change ur situation..and u should send it to repair
It says sending "hboot" then writing "hboot" both are okay saying finished with a time, and still wont bloody work!
removed
the downgrader didn't seem to work, but one of the other ones seemed to I think.
I am VERY releiaved, I cannot thank you enough!
I owe you £20. or a beer.
Hi!
I USB-Bricked my Desire PVT4. Now it is with HBoot 1.02 and official unrooted Gingerbread 2.3.3.
I tried common methods, but I cant get access to write misc partition.
I got my SD card working with fastboot oem enableqxdm 0. I made a valid mtd0 Image etc... but after copy the flash_image, rageagainstthecage and mtd0 the terminal emulator wont run after stopping the task.
Cant downgrade HBoot without root. Alpharev (revolutionary4-4) needs USB running in ROM.
I did following steps to unbrick (with help of "Leinad"):
http://forum.xda-developers.com/showthread.php?t=955845
Cant pass step 5! Relaunching the Terminal Emulator fails! Doesnt open anymore. I read, that writing Misc partition in HBoot 1.02 is not possible using this method.
Need working method for HBoot 1.02 with official Gingerbread 2.3.3 in order to USB-unbrick my Desire!
Any ideas?
Please !!!! I need help!!!!!
Thanx guys
Flash the gb ruu with the PB99IMG.zip method
Sent from my HTC Desire
andQlimax said:
Flash the gb ruu with the pmg99.zip method
Sent from my HTC Desire
Click to expand...
Click to collapse
Which ROM should be included in pmg99.zip?
An ruu is an htc utility that restore everything to stock
as u are usb bricked and can't run the ruu from the pc, u can use a PB99IMG.zip
is it basically what an ruu contain inside the exe
so the steps are:
1) run the gingerbread ruu 2.3.3 without plug the phone..start the exe go next till it ask to plug the phone or something
2) then from windows/run write %temp% and search a rom.zip file
3) rename it as PB99IMG.zip (ensure is not .zip.zip)
4) with an microsd card reader put it in the root of ur sdcard (not in any folder)
5) switch off the phone (pull the battery and plug in again just to be sure)
6) boot the phone in bootloader mode by pressing and holding vold down + press and hold power button..hold both untill u go in a menu with a white screen
7) after some seconds it should ask u automatically to flash the update..the choice yest with volume keys, then confirm yes with the power button
the update will restore everything, so u will lose everything in the phone (not in the sdcard)..ensure to have enough battery..thats it
EDIT: just edit this, check it
andQlimax said:
sorry..wait
Click to expand...
Click to collapse
I can use and run the official RUU 2.3 update exe in fastboot! Installation works fine. But after installation I have the USB (CDMA..) problem in Windows and gsm is not working!
dexterm1 said:
I can use and run the official RUU 2.3 update exe in fastboot! Installation works fine. But after installation I have the USB (CDMA..) problem in Windows and gsm is not working!
Click to expand...
Click to collapse
i don't think is an usb brick...from what i know an ruu should solve it..maybe im wrong..as u not s-off, well i dont have idea sorry
andQlimax said:
An ruu is an htc utility that restore everything to stock
as u are usb bricked and can't run the ruu from the pc, u can use a PB99IMG.zip
is it basically what an ruu contain inside the exe
so the steps are:
1) run the gingerbread ruu 2.3.3 without plug the phone..start the exe go next till it ask to plug the phone or something
2) then from windows/run write %temp% and search a rom.zip file
3) rename it as PB99IMG.zip (ensure is not .zip.zip)
4) with an microsd card reader put it in the root of ur sdcard (not in any folder)
5) switch off the phone (pull the battery and plug in again just to be sure)
6) boot the phone in bootloader mode by pressing and holding vold down + press and hold power button..hold both untill u go in a menu with a white screen
7) after some seconds it should ask u automatically to flash the update..the choice yest with volume keys, then confirm yes with the power button
the update will restore everything, so u will lose everything in the phone (not in the sdcard)..ensure to have enough battery..thats it
EDIT: just edit this, check it
Click to expand...
Click to collapse
Update with PB99IMG worked fine. I still have the problem that windows shows my Desire as "Qualcomm CDMA Technologies MSM".
SDCard on Desire works (after known adb command) . Loading status is delayed. Gsm works incorrect (breaks gsm phone calls after few seconds; UMTS running only in roaming mode).
try this:
usb brick fix for no root user:
http://forum.xda-developers.com/showthread.php?t=1015609
some infos about usb brick:
http://forum.xda-developers.com/showthread.php?t=691187
andQlimax said:
try this:
usb brick fix for no root user:
http://forum.xda-developers.com/showthread.php?t=1015609
Last post is my own.....
some infos about usb brick:
http://forum.xda-developers.com/showthread.php?t=691187
Click to expand...
Click to collapse
nice summary...
My..
FM Radio doesnt work..
Bluetooth doesnt work...
SDCard did not work (actually does after adb command)
GSM doesnt work...
I think it IS a USB Brick! The only different to other posts is, that I have HBoot 1.02 and official Gingerbread 2.3.3!!!! Is there a method to downgrade HBoot 1.02 without being in ROM?
from the other thread
dexterm1 said:
Relaunching the Terminal Emulator fails!
Click to expand...
Click to collapse
Try to re-do all the steps..if it fails to open, before u can flash the misc partition, maybe u did something wrong..at least it should open and u should be able to run the commands to flash the misc
andQlimax said:
from the other thread
Try to re-do all the steps..if it fails to open, before u can flash the misc partition, maybe u did something wrong..at least it should open and u should be able to run the commands to flash the misc
Click to expand...
Click to collapse
Tried several times. The Terminal Emulator does not restart after stopping it.
The USB Brick Problem on HBoot 1.02 with official GB (S-ON) is still present. No Ideas? I think there are many other people having the same problem (over 500 views !!)
Please Help!
I think people just browse the threads
Have you tried the PB99IMG.zip method yet?
Sent from my HTC Desire using XDA App
elliottg61 said:
I think people just browse the threads
Have you tried the PB99IMG.zip method yet?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Yes, I tried the PB99IMG.zip method several times.... Verification failed... (works with official GB 2.3 but there is still USB Brick )
I also tried changing rom.zip of official RUU to downgrade but it did not work.
Too bad that revolutionary needs USB in running Android
In Fastboot USB is running fine....
Would be great if there is a way to downgrade via Fastboot!!!
call htc and tell they that after the 2.3.3 update ur usb doesn't work anymore..maybe you will get repair under warranty
andQlimax said:
call htc and tell they that after the 2.3.3 update ur usb doesn't work anymore..maybe you will get repair under warranty
Click to expand...
Click to collapse
Is in progress...
First advice by HTC was a factory reset....
Hopefully its getting better.
I will report.
*Update
I need to send the bill with my desire. I have no bill - ebay...
I fixed my unrootet Phone (official GB 2.3.3, HBoot 1.02, S-ON, USB Brick)!!!!
I wifi connected with adb and got temp root with zergRush!
Then from cmd in adb shell I flashed the misc with mtd0.img!
Rebooting and everything was fine ))
Many thanks to all of you!!!
http://forum.xda-developers.com/showthread.php?t=1288969
I did root my evo 4g hboot 2.18 radio 2.15.0012.19 and i try to downgrade but i get stock... cant do anything and i have no backup... icant get into the recovery and i cant reboot onle the htc evo 4g logo plz help to solve this problem. How Ido to fixed plz help..
eddi2004 said:
I did root my evo 4g hboot 2.18 radio 2.15.0012.19 and i try to downgrade but i get stock... cant do anything and i have no backup... icant get into the recovery and i cant reboot onle the htc evo 4g logo plz help to solve this problem. How Ido to fixed plz help..
Click to expand...
Click to collapse
Try this:
1. power down
2. remove battery
3. press and hold power button for 10 sec.
4. reinstall battery
5. press and hold the volume down button
6. press the power button to turn the phone on but DO NOT release the volume button until you can see the boot screen.
when you are in the boot screen one of the options in the list should say recovery. use the volume button to navigate down to that option and press the power button to select it. your phone should then boot into recovery and you will get the recovery screen and choices.
thanks
i did it but when i get into recovery i see the phone with the sing and then i reboot get stock in htc evo 4g logo if u have any idea how to get into the phone to flash any rom would b perfect tnx
Sounds like it could be a USB brick. This has happened to me before. I remember when that happened to me and couldn't get into recovery. For some reason when I plugged in the micro usb to the phone it would let me boot into recovery. Give that a shot and try searching usb brick. Also my sd card could not be recognized once I booted into recovery.
How did you try to downgrade?
Sent from my PC36100 using xda premium
ok well i flash 2 programs 1 flash_image 2 mtd-eng then run the pc36img but nothing happen it says cant roll back hboot n i reboot the phone n i went to the bootloader n it was locked n i try to enter to the recovery n show me the phone w/ the sing...
any idea where can i get an usb brick??
I'm not familiar with a USB brick, but I believe that your computer can still read your phone through USB. I see that you were trying to S-OFF the phone. Looks like something went wrong when you flashed the misc partition, which locked your bootloader once again.
You should try running an RUU file from your computer with your phone connected which can be found here.
http://goo.im/stock/supersonic/ruu/...15.00.12.19_NV_2.33_release_234563_signed.exe
But first, you will need to install the Fastboot drivers to your computer which can be found here
http://unrevoked.com/rootwiki/doku.php/public/revolutionary
You need to run the RUU from your phone's bootloader from FASTBOOT USB (click on Fastboot then run the RUU from your computer).
If that works, that should at least get your phone back going again (unrooted of course).
i did but w/ the ruu doesnt work too appears error 155 unknow problem n stops i dont know what else to do
Just checking, did you run the RUU in FASTBOOT USB which should have been highlighted in red from your bootloader after clicking FASTBOOT? Also, with your phone connected to your computer while in FASTBOOT USB, check your computer's device manager from the control panel and see do you see anything under Android USB devices.
And too, which PC36IMG file did you try to run?
Sounds like you tryed to downgrade your hboot to the Eng hboot. If that is what you did, then congradulations! You have successfully bricked your device! Hboots are generally NOT downgradable...especially 2.18 to eng
{ParanoiA} said:
Sounds like you tryed to downgrade your hboot to the Eng hboot. If that is what you did, then congradulations! You have successfully bricked your device! Hboots are generally NOT downgradable...especially 2.18 to eng
Click to expand...
Click to collapse
Yea, I was afraid that the wrong PC36IMG file was indeed used. Generally on the newer phones, any downgrade of the Hboot below 2.02 is a guaranteed brick. That's why Captain Throwback only recommends PC36IMG files down to Hboot 2.10 (the 2.02 ones don't work with S-ON phones). On the older hardware however, the Hboot can be downgraded to anything, including 0.76 from 2.18. I've done it on mines. You just have to know which hardware version and partition erasesize your phone has.
the one that i get from evohacks pc36img i think i need one way to flash a rom
the one i get from a post in htcevohacks
is the pc36img
if i brick my phone is there any way to unbrick
eddi2004 said:
the one i get from a post in htcevohacks
is the pc36img
if i brick my phone is there any way to unbrick
Click to expand...
Click to collapse
The best advice that I can give you is to reboot the phone into FASTBOOT USB (connect it to your computer, then go to your bootloader and click on FASTBOOT), then go back to the HTCdev site, start over and try to re-unlock your bootloader. If you can do that, then I may have a workaround for you If not, there might not be much else that you can do.
ok i did everything that u tell me n now i rename the zip (ss_stock_4.67.651) in PC36IMG n then reflash recovery-RA-supersonic-v2.3 now i can get into the recovery menu n i flash the rename (ss_stock_4.67.651) PC36IMG n i have a rom from sprint but now i still cant use adb command so what else shuld i do to recovery to normal n there r many issues that cant load like mail that is forced to sptop unexpected n thank u for all ur help!!
in the command window type:
Code:
fastboot oem enableqxdm 0and then:
Code:
fastboot reboot
eddi2004 said:
in the command window type:
Code:
fastboot oem enableqxdm 0and then:
Code:
fastboot reboot
Click to expand...
Click to collapse
Oh no. I don't know which tutorial you got those instructions from.
I'm also lost with your description of what happened. I hope you unlocked your bootloader, and can now boot into the operating system. If so, you were not suppose to rename the ss_stock_4.67 file to PC36IMG. You were suppose to flash that through RECOVERY as is. If I were you, I would go back to RECOVERY, and wipe All Factory/Reset (or whatever it says) and Dalvik-cache, then reflash the ss_stock file or another ROM.
Second, the adb commands only work from the operating system, not FASTBOOT. You need to be inside the operating system with your phone connected to your computer and USB Debugging enabled under Settings/Applications.
ok here i am
i change the name cos the bootloader let me flash the recovery amon ra 2.3 then i can see the recovery menu n i flash the rom named pc36img n give me the sprint w/ errors now i download another rom that i flash n now my computer can read the sdcard but im still locked n i dont know if im still rooted so the what i think is i have a usb brick so i need to unbrick my usb to use the adb command so i apreciate ur help w/ this thanks all of u for ur help
Dear all,
I have been looking around the forums and downloaded a few things and looked at various solutions, but I am stuck at the first hurdle.
I have been given an htc Desire Bravo that just will not boot. I do not know how it failed originally but I can only get it into the boot screens, either the fastboot/hboot logon ot the 5 buzzes and the htc logo lock. Also it takes about 30 minutes with the battery out after every failed boot attempt to restart the boot screen.
I have run adb but it cannot tell me a cid number, I have a micro sd card in it but it does not have the pb99diag.zip on it. When I put such a file on the sd card it does not find it. Communication via adb and the phone has varied success. I suspect it is drivers and what I read is an old adb bug where server is out of date.
I have never done this before this weekend so please be gentle with me!
If I can get it to work, even to use it like a wifi tablet without phone I would be happy. I am in the UK and if we have real success I would get it on tesco PAYG
I get the "cannot find pb99diag.zip etc" dialogue when going into hboot.
The logon says
BRAVO PVT-1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO 5.11.05.27
AUG 10 2010, 17:52.18
Can someone suggest where to start? I have tried a number of guides on the forum but no success so far. Even just getting an os running would be success. I will be looking at this each evening so apologies if I seem slow to respond
Thanks
Adrian
First make S-Off. I forgot how but if i think right, you must it do via revolutionary, If it success, then download 4ext recovery.IMG and flash it via fastboot and reboot in bootloader in your recovery
Sent from my HTC Desire using XDA Free mobile app
battlekaier said:
First make S-Off. I forgot how but if i think right, you must it do via revolutionary, If it success, then download 4ext recovery.IMG and flash it via fastboot and reboot in bootloader in your recovery
Sent from my HTC Desire using XDA Free mobile app
Click to expand...
Click to collapse
Thank you battlekaier, I will try this out tonight when I get home and will report back.
A
ukubuntu said:
Thank you battlekaier, I will try this out tonight when I get home and will report back.
A
Click to expand...
Click to collapse
After you s off u can flash hboot the easy way but first s off.
Sent from my HTC Desire using XDA Free mobile app
If u phone does not boot then u can NOT s-off, ur phone needs to be booted.. also if ur s-on and not rooted then all u can do is flash a ruu.
Did u try factory reset from bootloader menu? Try that first, u never know but chances r ul prob need to ruu a ruu.
jmcclue said:
If u phone does not boot then u can NOT s-off, ur phone needs to be booted.. also if ur s-on and not rooted then all u can do is flash a ruu.
Did u try factory reset from bootloader menu? Try that first, u never know but chances r ul prob need to ruu a ruu.
Click to expand...
Click to collapse
Hi jmcclue,
Thanks for the comments. I can boot to the HBoot and Fastboot screens, thats how I could find the S-ON and version data. If I get it to reboot, I get either a white screen with just "htc" on it, or 5 buzzes and a screen with no life at all. I am hopeful to get it to S-OFF as I have had some communication through the usb to pc connection. I am not sure if I can do an RUU update as I don't seem to have a CID. I do not have a factory reset option on the HBOOT screen. I have tried clear storage but that has no effect. Perhaps I need the S-OFF first.
Cheers again,
A
Use the 2.3gb update ruu its wwe (world wide english) so dont worry bout cid. U can find it in bortaks troubleshooting guide in resources section and its naned 2.3.3 ruu. U will find it easy enough in google aswell. Search for "htc desire 2.3gb update" its a exe file so just boot ur phone into fastboot, plug in ur phone and run the ruu, hopefully it willvwork. Im a bit worried tho about the 5 vibrations u get, maybe a sign of hardware failure. But try that ruu anyway. And again u can not get s-off unless ur phone is fully working/booted.
jmcclue said:
Use the 2.3gb update ruu its wwe (world wide english) so dont worry bout cid. U can find it in bortaks troubleshooting guide in resources section and its naned 2.3.3 ruu. U will find it easy enough in google aswell. Search for "htc desire 2.3gb update" its a exe file so just boot ur phone into fastboot, plug in ur phone and run the ruu, hopefully it willvwork. Im a bit worried tho about the 5 vibrations u get, maybe a sign of hardware failure. But try that ruu anyway. And again u can not get s-off unless ur phone is fully working/booted.
Click to expand...
Click to collapse
Many thanks
Well that was a bit wierd
If anyone can see where I went wrong, feel free to say.
I could not seem to get the link between the phone and the pc so I removed the htc sync and restarted the pc. I could then connect to the phone in some way as abd gave a command error when I sent a fastboot oem readcid which it normally does. So leaving it in fastboot with usb I ran the wwe~.exe file and it all seemed to be doing installing. There were tens of installations going to the phone I guess each reaching 100%. Suddenly I had a web page popup in my browser s.rev2pub.com/ul_cb/player.html?a=19471543&context=c23573548&size=800x600&rt=popunder&ci=10&cb=[CACHEBUSTER] recommending I download latest drivers. The wwe ruu vanished and I have no continuing processes in Task manager that I can see.
So, should I have installed in hboot? Thankfully I can still get the phone to power on. What should happen after the exe file installs?
I am able to get some response from the phone as adb devices returns the phone device number. So I hope I can try again.
Any thoughts?
Many thanks
Revolutionary S-OFF and recovery
ukubuntu said:
Dear all,
I have been looking around the forums and downloaded a few things and looked at various solutions, but I am stuck at the first hurdle.
I have been given an htc Desire Bravo that just will not boot. I do not know how it failed originally but I can only get it into the boot screens, either the fastboot/hboot logon ot the 5 buzzes and the htc logo lock. Also it takes about 30 minutes with the battery out after every failed boot attempt to restart the boot screen.
I have run adb but it cannot tell me a cid number, I have a micro sd card in it but it does not have the pb99diag.zip on it. When I put such a file on the sd card it does not find it. Communication via adb and the phone has varied success. I suspect it is drivers and what I read is an old adb bug where server is out of date.
I have never done this before this weekend so please be gentle with me!
If I can get it to work, even to use it like a wifi tablet without phone I would be happy. I am in the UK and if we have real success I would get it on tesco PAYG
I get the "cannot find pb99diag.zip etc" dialogue when going into hboot.
The logon says
BRAVO PVT-1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO 5.11.05.27
AUG 10 2010, 17:52.18
Can someone suggest where to start? I have tried a number of guides on the forum but no success so far. Even just getting an os running would be success. I will be looking at this each evening so apologies if I seem slow to respond
Thanks
Adrian
Click to expand...
Click to collapse
Hey Adrian, I had the same problem as you did, hopefully I can be of help.
First, like everyone else is saying you will need S-OFF.
To do this head to this site on your PC revolutionary.io hit download for windows or Linux or whatever your pc is running, then you will need to fill out information about your device (see attached screenshot). Device, HBoot number, and serial number, (the serial number can be found behind the battery of your device). Once you have done that, click "Generate Key". it will give you a key, remember it or write it down.
Then, open the file that was downloaded, and extract the contents to your documents and Run the revolutionary( should look like the screenshot attached). Plug your device in (assuming you have the drivers) and it should ask you to enter the beta key we had before. Enter that and hit enter. it will then S-off your Desire and soon ask if you would like to install a custom recovery. hit Y and then enter, once that is finished, unplug your device and in HBoot go to "Recovery". Now you can flash a ROM of your choice.
Hopefully I made sense!
Best of luck
Neibaf97 said:
Hey Adrian, I had the same problem as you did, hopefully I can be of help.
First, like everyone else is saying you will need S-OFF.
To do this head to this site on your PC revolutionary.io hit download for windows or Linux or whatever your pc is running, then you will need to fill out information about your device (see attached screenshot). Device, HBoot number, and serial number, (the serial number can be found behind the battery of your device). Once you have done that, click "Generate Key". it will give you a key, remember it or write it down.
Then, open the file that was downloaded, and extract the contents to your documents and Run the revolutionary( should look like the screenshot attached). Plug your device in (assuming you have the drivers) and it should ask you to enter the beta key we had before. Enter that and hit enter. it will then S-off your Desire and soon ask if you would like to install a custom recovery. hit Y and then enter, once that is finished, unplug your device and in HBoot go to "Recovery". Now you can flash a ROM of your choice.
Hopefully I made sense!
Best of luck
Click to expand...
Click to collapse
Thank you Neibaf97
Can I confirm that I can do this from the HBOOT screen or the fastboot screen? Also where jmmclue said if I can't boot then I can't S-Off, does that mean boot to the HBOOT screen or into Android? Then if I want to load say WWE, do I put that on a microSD to get it to recover?
thanks again
A
ukubuntu said:
Thank you Neibaf97
Can I confirm that I can do this from the HBOOT screen or the fastboot screen? Also where jmmclue said if I can't boot then I can't S-Off, does that mean boot to the HBOOT screen or into Android? Then if I want to load say WWE, do I put that on a microSD to get it to recover?
thanks again
A
Click to expand...
Click to collapse
He means into android.
Sent from my HTC Desire using XDA Free mobile app
lilsafbig said:
He means into android.
Sent from my HTC Desire using XDA Free mobile app
Click to expand...
Click to collapse
Thanks lilsafbig, that was a little too ambiguous to understand, but I have a few developments.
I am able to communicate to some degree with adb between phone and pc. Before I was unable to get anything back but now with the right syntax I have got back the CID as HTC_001 and the device number. But when I run revolutionary from the fastboot USB screen the revolutionary continues to wait for the device to show. Is it likely that USB degugging was off prior to the failure, is there a way to get it on. I suggest this as when I connect it to my pc it recognizes the device and shows in the device manager as an htc unspecified device (this is progress). As I cannot boot android it does not show as an additional drive in file manger. when I try some of the fastboot oem commands I get bad command errors, whilst fastboot getvars is ok. Could this be why I cannot get revolutionary to S-OFF!
Thanks
additional info, when usb is in an in fastboot usb, the device manager sees it as android 1.0
ukubuntu said:
additional info, when usb is in an in fastboot usb, the device manager sees it as android 1.0
Click to expand...
Click to collapse
also tried "fastboot oem writecid 11111111" and got "FAILED(remoteartition is not existed).."
ukubuntu said:
also tried "fastboot oem writecid 11111111" and got "FAILED(remoteartition is not existed).."
Click to expand...
Click to collapse
So..... does this mean I am bricked?
BUMP!
ukubuntu said:
So..... does this mean I am bricked?
Click to expand...
Click to collapse
If you can still get to bootloader / fastboot screen, then you are rarely ever bricked.
1. Ignore anything and everything to do with revolutionary and fastboot for now. I'm afraid the first few posts while trying to be helpful have been misleading. Get your phone booting up into Android OS first, i.e. into a stock ROM using an RUU
2. Use the 2.3.3. GB RUU, nothing else, it doesn't need a goldcard or care about CID etc.
3. Download it from the bottom here, then use Bortak's troubleshooting guide stickied to the top of Q&A, Point [7] to run it as a PB99IMG.zip from the root of your sdcard. That way you don't need to run it through USB or care about what drivers are installed.
Thank you Eddie, I will try that. I did try flash a PB99IMG.zip before with no success but I will try again.
I found it here Official Stock Sense Gingerbread_v1.2 GB-2.3.3_A2SD – http://androidba.se/J7 for desire (neophyte)
I hope it can work out ok. I guess I format the sd card to fat32 not ext4
Will let you know how it goes.
Thanks,
A
ukubuntu said:
Thank you Eddie, I will try that. I did try flash a PB99IMG.zip before with no success but I will try again.
I found it here Official Stock Sense Gingerbread_v1.2 GB-2.3.3_A2SD – http://androidba.se/J7 for desire (neophyte)
I hope it can work out ok. I guess I format the sd card to fat32 not ext4
Will let you know how it goes.
Thanks,
A
Click to expand...
Click to collapse
That's a custom rom.
Here's the link for the 2.3.3 ruu.
http://www.theandroidsoul.com/downl...uu-now-to-update-to-to-the-latest-android-os/
Sent from my HTC Desire using XDA Free mobile app
ukubuntu said:
I did try flash a PB99IMG.zip before with no success but I will try again.
I found it here Official Stock Sense Gingerbread_v1.2 GB-2.3.3_A2SD – http://androidba.se/J7 for desire (neophyte)/
Click to expand...
Click to collapse
That did not work because the file is not an RUU...it is a stock rooted custom ROM with A2SD (the clue is in the name). It is designed to flashed in recovery like any other ROM. Renaming it to PB99IMG.zip won't do anything.
Use the actual shipped roms RUU link provided.
Reformat your sdcard to a single FAT32 partition if necessary, then follow Method [7] of the guide, place only the PB99IMG.zip on the root of the sdcard (not in any folder)