[Q] USB Brick HBoot 1.02 and official Gingerbread 2.3.3 - Desire Q&A, Help & Troubleshooting

Hi!
I USB-Bricked my Desire PVT4. Now it is with HBoot 1.02 and official unrooted Gingerbread 2.3.3.
I tried common methods, but I cant get access to write misc partition.
I got my SD card working with fastboot oem enableqxdm 0. I made a valid mtd0 Image etc... but after copy the flash_image, rageagainstthecage and mtd0 the terminal emulator wont run after stopping the task.
Cant downgrade HBoot without root. Alpharev (revolutionary4-4) needs USB running in ROM.
I did following steps to unbrick (with help of "Leinad"):
http://forum.xda-developers.com/showthread.php?t=955845
Cant pass step 5! Relaunching the Terminal Emulator fails! Doesnt open anymore. I read, that writing Misc partition in HBoot 1.02 is not possible using this method.
Need working method for HBoot 1.02 with official Gingerbread 2.3.3 in order to USB-unbrick my Desire!
Any ideas?
Please !!!! I need help!!!!!
Thanx guys

Flash the gb ruu with the PB99IMG.zip method
Sent from my HTC Desire

andQlimax said:
Flash the gb ruu with the pmg99.zip method
Sent from my HTC Desire
Click to expand...
Click to collapse
Which ROM should be included in pmg99.zip?

An ruu is an htc utility that restore everything to stock
as u are usb bricked and can't run the ruu from the pc, u can use a PB99IMG.zip
is it basically what an ruu contain inside the exe
so the steps are:
1) run the gingerbread ruu 2.3.3 without plug the phone..start the exe go next till it ask to plug the phone or something
2) then from windows/run write %temp% and search a rom.zip file
3) rename it as PB99IMG.zip (ensure is not .zip.zip)
4) with an microsd card reader put it in the root of ur sdcard (not in any folder)
5) switch off the phone (pull the battery and plug in again just to be sure)
6) boot the phone in bootloader mode by pressing and holding vold down + press and hold power button..hold both untill u go in a menu with a white screen
7) after some seconds it should ask u automatically to flash the update..the choice yest with volume keys, then confirm yes with the power button
the update will restore everything, so u will lose everything in the phone (not in the sdcard)..ensure to have enough battery..thats it
EDIT: just edit this, check it

andQlimax said:
sorry..wait
Click to expand...
Click to collapse
I can use and run the official RUU 2.3 update exe in fastboot! Installation works fine. But after installation I have the USB (CDMA..) problem in Windows and gsm is not working!

dexterm1 said:
I can use and run the official RUU 2.3 update exe in fastboot! Installation works fine. But after installation I have the USB (CDMA..) problem in Windows and gsm is not working!
Click to expand...
Click to collapse
i don't think is an usb brick...from what i know an ruu should solve it..maybe im wrong..as u not s-off, well i dont have idea sorry

andQlimax said:
An ruu is an htc utility that restore everything to stock
as u are usb bricked and can't run the ruu from the pc, u can use a PB99IMG.zip
is it basically what an ruu contain inside the exe
so the steps are:
1) run the gingerbread ruu 2.3.3 without plug the phone..start the exe go next till it ask to plug the phone or something
2) then from windows/run write %temp% and search a rom.zip file
3) rename it as PB99IMG.zip (ensure is not .zip.zip)
4) with an microsd card reader put it in the root of ur sdcard (not in any folder)
5) switch off the phone (pull the battery and plug in again just to be sure)
6) boot the phone in bootloader mode by pressing and holding vold down + press and hold power button..hold both untill u go in a menu with a white screen
7) after some seconds it should ask u automatically to flash the update..the choice yest with volume keys, then confirm yes with the power button
the update will restore everything, so u will lose everything in the phone (not in the sdcard)..ensure to have enough battery..thats it
EDIT: just edit this, check it
Click to expand...
Click to collapse
Update with PB99IMG worked fine. I still have the problem that windows shows my Desire as "Qualcomm CDMA Technologies MSM".
SDCard on Desire works (after known adb command) . Loading status is delayed. Gsm works incorrect (breaks gsm phone calls after few seconds; UMTS running only in roaming mode).

try this:
usb brick fix for no root user:
http://forum.xda-developers.com/showthread.php?t=1015609
some infos about usb brick:
http://forum.xda-developers.com/showthread.php?t=691187

andQlimax said:
try this:
usb brick fix for no root user:
http://forum.xda-developers.com/showthread.php?t=1015609
Last post is my own.....
some infos about usb brick:
http://forum.xda-developers.com/showthread.php?t=691187
Click to expand...
Click to collapse
nice summary...
My..
FM Radio doesnt work..
Bluetooth doesnt work...
SDCard did not work (actually does after adb command)
GSM doesnt work...
I think it IS a USB Brick! The only different to other posts is, that I have HBoot 1.02 and official Gingerbread 2.3.3!!!! Is there a method to downgrade HBoot 1.02 without being in ROM?

from the other thread
dexterm1 said:
Relaunching the Terminal Emulator fails!
Click to expand...
Click to collapse
Try to re-do all the steps..if it fails to open, before u can flash the misc partition, maybe u did something wrong..at least it should open and u should be able to run the commands to flash the misc

andQlimax said:
from the other thread
Try to re-do all the steps..if it fails to open, before u can flash the misc partition, maybe u did something wrong..at least it should open and u should be able to run the commands to flash the misc
Click to expand...
Click to collapse
Tried several times. The Terminal Emulator does not restart after stopping it.

The USB Brick Problem on HBoot 1.02 with official GB (S-ON) is still present. No Ideas? I think there are many other people having the same problem (over 500 views !!)
Please Help!

I think people just browse the threads
Have you tried the PB99IMG.zip method yet?
Sent from my HTC Desire using XDA App

elliottg61 said:
I think people just browse the threads
Have you tried the PB99IMG.zip method yet?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Yes, I tried the PB99IMG.zip method several times.... Verification failed... (works with official GB 2.3 but there is still USB Brick )
I also tried changing rom.zip of official RUU to downgrade but it did not work.
Too bad that revolutionary needs USB in running Android
In Fastboot USB is running fine....
Would be great if there is a way to downgrade via Fastboot!!!

call htc and tell they that after the 2.3.3 update ur usb doesn't work anymore..maybe you will get repair under warranty

andQlimax said:
call htc and tell they that after the 2.3.3 update ur usb doesn't work anymore..maybe you will get repair under warranty
Click to expand...
Click to collapse
Is in progress...
First advice by HTC was a factory reset....
Hopefully its getting better.
I will report.
*Update
I need to send the bill with my desire. I have no bill - ebay...

I fixed my unrootet Phone (official GB 2.3.3, HBoot 1.02, S-ON, USB Brick)!!!!
I wifi connected with adb and got temp root with zergRush!
Then from cmd in adb shell I flashed the misc with mtd0.img!
Rebooting and everything was fine ))
Many thanks to all of you!!!
http://forum.xda-developers.com/showthread.php?t=1288969

Related

[Q] Stuck with HTC logo with four warning symbols

I ran a RUU and now the phone wont boot and just getting a HTC logo with four warning symbols and all the corners.... also when i connect to Computer and disconnect show a bootloader version and just one option - RUU...
Any ideas? I tried installing other RUUs but errors pop up.
AFAIK, my phone is unbranded.
AFAIK, your phone is bricked. It may not be, but I think it is.
Swyped from my HTC Desire running LeeDrOiD 2.3d with Tapatalk.
BodenM said:
AFAIK, your phone is bricked. It may not be, but I think it is.
Swyped from my HTC Desire running LeeDrOiD 2.3d with Tapatalk.
Click to expand...
Click to collapse
Oh ok, that's not good to hear.
Any other ideas?
Did you maybe try OTA update before installing RUU? can you adb shell? did you rooted your phone? Can you go to hboot by pressing volume down+power, of course your phone must be turn off before this?
wenck said:
Did you maybe try OTA update before installing RUU? can you adb shell? did you rooted your phone? Can you go to hboot by pressing volume down+power, of course your phone must be turn off before this?
Click to expand...
Click to collapse
Didn't install any OTA updates.
I can't get my device to be seen by adb, tried various drivers already.
Can't go to hboot.
Click on your RUU exe only ONCE, then go to windows and run %TEMP%, find rom.zip and copy to desktop, rename to update.zip and copy to sd card. then power off phone and try. Are you absolutely sure u use right RUU? Please check radio and RUUs here http://shipped-roms.com/index.php?category=android&model=Bravo
wenck said:
Click on your RUU exe only ONCE, then go to windows and run %TEMP%, find rom.zip and copy to desktop, rename to update.zip and copy to sd card. then power off phone and try. Are you absolutely sure u use right RUU? Please check radio and RUUs here http://shipped-roms.com/index.php?category=android&model=Bravo
Click to expand...
Click to collapse
Yeah, I'm sure I installed an RUU.
Will try this. Thanks
wenck said:
Click on your RUU exe only ONCE, then go to windows and run %TEMP%, find rom.zip and copy to desktop, rename to update.zip and copy to sd card. then power off phone and try. Are you absolutely sure u use right RUU? Please check radio and RUUs here http://shipped-roms.com/index.php?category=android&model=Bravo
Click to expand...
Click to collapse
Nvm, found it. Trying now.
Edit : Nothing happens. Copied the update.zip to the card, turned the phone on.
Same screen.
Remove battery and put it back, hold volume down+power button 4-5 seconds. Can you enter fasboot? if so selecet recovery. Also make sure there ain't no other zip files in root of sd card. Also try to uninstall htc sync, reboot and install again.
wenck said:
Remove battery and put it back, hold volume down+power button 4-5 seconds. Can you enter fasboot? if so selecet recovery. Also make sure there ain't no other zip files in root of sd card. Also try to uninstall htc sync, reboot and install again.
Click to expand...
Click to collapse
Can't enter fast boot.
Stuck at the htc screen and ruu screen.
Do you have branded or unbranded phone? You need goldcard if you have branded.
wenck said:
Do you have branded or unbranded phone? You need goldcard if you have branded.
Click to expand...
Click to collapse
Not branded.
Ok, now you have couple options, reinstall usb and try RUU or second one use fastboot.exe to flash spl, radio, and system. This is tricky. Also you can take your phone to service to identify what is wrong, and then come back and say to us. you do not need to pay repair, they will tell you whats wrong and give you offer how much would it cost. Finally you must google alot and try lost of methods. Couple guys had problems like yours and solve it on different ways. Basicly we cannot help you more than this without 100% accurate radio and ruu version.
wenck said:
Ok, now you have couple options, reinstall usb and try RUU or second one use fastboot.exe to flash spl, radio, and system. This is tricky. Also you can take your phone to service to identify what is wrong, and then come back and say to us. you do not need to pay repair, they will tell you whats wrong and give you offer how much would it cost. Finally you must google alot and try lost of methods. Couple guys had problems like yours and solve it on different ways. Basicly we cannot help you more than this without 100% accurate radio and ruu version.
Click to expand...
Click to collapse
What do you mean by try to install usb?
Get a RUU and install again?
My problem now is getting the drivers to work. So I can't use ADB or RUU anymore.
It shows in the Device Manager though as Android Phone - Android Bootloader Interface.
Thanks!
i mean uninstall htc sync and usb drivers and reboot then install again drivers without htc sync. did you maybe root your phone, run custom roms flash radio before?
wenck said:
i mean uninstall htc sync and usb drivers and reboot then install again drivers without htc sync. did you maybe root your phone, run custom roms flash radio before?
Click to expand...
Click to collapse
Ok will do.
Yes, I have root and ran custom rom (leedroid). I didn't bother with radio though.
also put blank sd sard in your phone, formatted to fat32. If you used ext partitions for app2sd+ delete them and create again normal microsd card with fat32. Or u can put another card as long as it is fat 32.
wenck said:
also put blank sd sard in your phone, formatted to fat32. If you used ext partitions for app2sd+ delete them and create again normal microsd card with fat32. Or u can put another card as long as it is fat 32.
Click to expand...
Click to collapse
What drivers should I use?
And I noticed that when I plug in the phone a "Safely Remove" icon appears on my tray.
Dude you have no bootloader drivers thats all, download and install htc sync, then connect your phone, "android bootloader interface" will change to "htc bootloader interface" then just run an ruu
Sent from my Desire HD using Tapatalk
AndroHero said:
Dude you have no bootloader drivers thats all, download and install htc sync, then connect your phone, "android bootloader interface" will change to "htc bootloader interface" then just run an ruu
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Ok will try this! Thanks
Edit : Still shows as Android Bootloader Interface, maybe I'm doing something wrong.
Edit 2 : Uninstalled the drivers , shows as "My HTC" now. Tried RUU, it detects it. I'm getting error 131
Edit 3 : Tried another RUU, got error 110. I think I need to get the right RUU.
Edit 4 : Shipped roms seems to have a problem, downloads stop at the middle. Any hotfile links for the RUUs?

[Q] Desire S-ON bootloop, RUU img help if u please :)

Hi.
I have a problem with my DHD, and have been browsing these forums for a solution. Im new to this so i need some confirmation, a url, and some explanation.
This happend:
I tried to root my desire HD with visionary+ r14. I did temproot, got back into the app just fine, checked for "set system r/w after root", and clicked attemt permroot. The phone booted, and got stuck in a bootloop. My Hboot menu sais S-ON on top. Tried reseting factory settings nothing helps. Since i didnt get the phone rooted, no clockword recovery installed...
Phone details:
The phone had the factory 1.32 build on it.
other info that might be valid:
Hboot: 0.85.0007
microp-0438
radio-26.03.02.26_M
eMMC-boot
oct 11. 2010
1. From searching and reading, it seems i need a RUU stock image build 1.32, can anyone provide me with an URL for the correct image?
2. Can i use the bootloader on the phone to do this? ..and how?
Hope u have some time to spare, and help this niblet :=)
Thnx for reading
PS:
Before i did this, the phone was rooted, with the same visionary pluss file. I tried to install clockword recovery mod, but it wouldnt "take". I then factory reset the phone in the android recovery menu, and the rest is listed above.
Download your RUU from here: http://xdafil.es/index.php?path=DesireHD/RUU/
How do i know i have the right drivers on the pc? Do i get those drivers from installing the HTC sync program?
sirreal1988 said:
How do i know i have the right drivers on the pc? Do i get those drivers from installing the HTC sync program?
Click to expand...
Click to collapse
If you install HTC sync (download it from their website or it is also in your sdcard unless you have not removed it ), you get all the necessary drivers...
Hm, i have installed HTC sync, but as my phone is stuck on the blackscreen and red triangle, HTC sync does not detect my phone.
When i try to run the exe file "RUU_Ace_HTC_WWE_1.32.405.6_Radio_12.28b.60.140e_26.03.02.26_M_release_155891_signed", it gives me an error [170], USB connection error.
Is there a way to run this file from the bootloader?
Try to push a PD98IMG.zip (this is stock HTC 1.32 rom from this thread unrooted, hboot s-on) to the sd card, boot into bootloader and flash "new" rom
with adb:
Code:
adb push directory/to/your/PD98IMG.zip /sdcard/
adb reboot bootloader
or if adb doesn't work, put the stock rom into the top of your sdcard, reboot the phone while holding the vol-down button.
follow the instructions on the device(normally it search for the PD98IMG.zip and ask you to install it)
How importanat is the last part of the filename of the RUU file "_2 6.03.02.26_M_release_155891_signed". As the phone is not bootable i cant check find that info on the phone anymore.
"Radio_12.28b.60.140e_2 6.03.02.26_M" it's the radio version.
At the bottom of this site is the USB Driver try it.
Thnx to both of u. Everything now working like a charm.
Good that you got it sorted. Can you edit the tag and put [solved]?
sirreal1988 said:
Thnx to both of u. Everything now working like a charm.
Click to expand...
Click to collapse
could you give me for detail how you solved this problem bro? because i have some problem like u (my dhd only black screen with red triangle warning since i was unsuccessfull root my dhd).
soni.setia said:
could you give me for detail how you solved this problem bro? because i have some problem like u (my dhd only black screen with red triangle warning since i was unsuccessfull root my dhd).
Click to expand...
Click to collapse
with an unbranded device it should be easy, download the driver and the image in the posts above, install the driver and run the exe.
On linux/unix you can download the sdk (intructions to install on the site) and then you are able to use the adb commands with the PD98IMG.img also in the posts above.
with a branded device it can be more complicated take a look at this but i don't know how far your system is online and if you are able to use adb.
As the guy above me mentioned, it's quite easy to recover your phone if it's unbranded.
Download a WWE RUU from the link someone postet before. Then boot into the bootloader and connect your DHD to your pc. If you have htc sync installed, it should recognise your phone. Then run the RUU on you pc and everything should be fine now.

[Q] Unrooting, gone t!ts up, now bricked.

Im massively confused.
I would like to return my desire to stock, I've had nothing but signal problems since rooting and flashing another rom.
My phone was originally an o2 branded phone, so I have downloaded the RUU for the o2 (i'm guessing this includes the radio?) I've tried running the RUU and its gives me an error about my bootloader, I've just checked and the bootloader is 0.80.
Now this is where i'm getting confused, I can't wholeley remember what SDcard I made my goldcard. So do I need to make a new goldcard in order to compelte the Unroot or do I need to downgrade 2.2 to 2.1 using this? http://forum.xda-developers.com/showthread.php?t=768256 and then start again...
Or am I miles out?
Which ruu did you try?
This is the most recent one on shipped roms:
http://shipped-roms.com/download.ph...00.32U_5.09.05.30_2_release_144166_signed.exe
Sent from my HTC Desire using Tapatalk
better link:
http://www.multiupload.com/7YMY6RLCKY
Right i've been trying most the night to get this sorted,
the first link doesn't seem to download anything,
the second downloads just fine and then runs then I get a error (110) File open error. leaving the phone with the HTC logo and 4 ! marks on four coners, I've tried re downloading the file aswell
this is the information that I get when I unplug the phone from the computer.
bravo PVT1 ship S-on
Hboot 0.93.0001
Microp -031d
touch panel - synt0101
radio 5.09.05.30.2
aug 18 2010 17.52.18
RUU
parsing
1.splash - ok
2.boot - ok
3. recovery - ok
4. radio cust - ok
5. splash1 - ok
6. radio V2 - ok
7. System - FAIL PU
8. userdata - ok
Partition update fail
update fail
You don't need a goldcard if you flash the ruu which was installed on your phone when you bought it.
So if you phone was o2 branded and you flash a o2 ruu , you don't need a goldcard. If you want to flash a wwe ruu (unbranded) you do.
Did you write down the exact firmware version before rooting?
Sent from my HTC Desire
Right so its just about finding the correct RUU to get the phone working again?
Unfortunately I did'nt write any information down
afternoon bump.
Really could do with my phone up and running
any ideas?
Did you boot your phone in fastboot and then run the ruu?
Lennyz1988 said:
Did you boot your phone in fastboot and then run the ruu?
Click to expand...
Click to collapse
.
How do I boot in to fastboot? Normally pressing vol - + Power would = fast boot right? doing this does nothing.
Should be power and BACK key
Sent from my HTC Desire using Tapatalk
cant do nothing with any of the buttons, the only time the screen changes is when i unplug the phone from the usb (connected to computer) then i get a white screen that gives me some hboot information and under that ( normally where you would expect to see the bootloader etc it just says RUU, but again none of the buttons function.
Do you know how to use fastboot or adb?
BigMrB said:
Do you know how to use fastboot or adb?
Click to expand...
Click to collapse
I dont have a clue how to use either tbh, but Im willing to learn if its what I have to do to get this brick unbricked
Download the ruu again from the link eddy gave you.
Then use EddyOS his instructions about extracting the .zip file from the .exe you just downloaded.
You can extract the ROM.zip from any RUU to install via ZIP
Start the RUU and once at the first main screen click Start>Run and type
%temp%
now, find the newest folder and in there will be a ZIP file called Rom - copy this to your desktop and rename it PB99IMG. (Don't extract the file) Now copy this to your SD card and start the phone in HBOOT (turn it on whilst holding volume down). It will find the file and start the update. Just follow the instructions...
Do all this while not plugged into your computer. Not sure if it will work, but it's worth a shot.
Click to expand...
Click to collapse

[Q] stock cant reboot nd recovery plz help

I did root my evo 4g hboot 2.18 radio 2.15.0012.19 and i try to downgrade but i get stock... cant do anything and i have no backup... icant get into the recovery and i cant reboot onle the htc evo 4g logo plz help to solve this problem. How Ido to fixed plz help..
eddi2004 said:
I did root my evo 4g hboot 2.18 radio 2.15.0012.19 and i try to downgrade but i get stock... cant do anything and i have no backup... icant get into the recovery and i cant reboot onle the htc evo 4g logo plz help to solve this problem. How Ido to fixed plz help..
Click to expand...
Click to collapse
Try this:
1. power down
2. remove battery
3. press and hold power button for 10 sec.
4. reinstall battery
5. press and hold the volume down button
6. press the power button to turn the phone on but DO NOT release the volume button until you can see the boot screen.
when you are in the boot screen one of the options in the list should say recovery. use the volume button to navigate down to that option and press the power button to select it. your phone should then boot into recovery and you will get the recovery screen and choices.
thanks
i did it but when i get into recovery i see the phone with the sing and then i reboot get stock in htc evo 4g logo if u have any idea how to get into the phone to flash any rom would b perfect tnx
Sounds like it could be a USB brick. This has happened to me before. I remember when that happened to me and couldn't get into recovery. For some reason when I plugged in the micro usb to the phone it would let me boot into recovery. Give that a shot and try searching usb brick. Also my sd card could not be recognized once I booted into recovery.
How did you try to downgrade?
Sent from my PC36100 using xda premium
ok well i flash 2 programs 1 flash_image 2 mtd-eng then run the pc36img but nothing happen it says cant roll back hboot n i reboot the phone n i went to the bootloader n it was locked n i try to enter to the recovery n show me the phone w/ the sing...
any idea where can i get an usb brick??
I'm not familiar with a USB brick, but I believe that your computer can still read your phone through USB. I see that you were trying to S-OFF the phone. Looks like something went wrong when you flashed the misc partition, which locked your bootloader once again.
You should try running an RUU file from your computer with your phone connected which can be found here.
http://goo.im/stock/supersonic/ruu/...15.00.12.19_NV_2.33_release_234563_signed.exe
But first, you will need to install the Fastboot drivers to your computer which can be found here
http://unrevoked.com/rootwiki/doku.php/public/revolutionary
You need to run the RUU from your phone's bootloader from FASTBOOT USB (click on Fastboot then run the RUU from your computer).
If that works, that should at least get your phone back going again (unrooted of course).
i did but w/ the ruu doesnt work too appears error 155 unknow problem n stops i dont know what else to do
Just checking, did you run the RUU in FASTBOOT USB which should have been highlighted in red from your bootloader after clicking FASTBOOT? Also, with your phone connected to your computer while in FASTBOOT USB, check your computer's device manager from the control panel and see do you see anything under Android USB devices.
And too, which PC36IMG file did you try to run?
Sounds like you tryed to downgrade your hboot to the Eng hboot. If that is what you did, then congradulations! You have successfully bricked your device! Hboots are generally NOT downgradable...especially 2.18 to eng
{ParanoiA} said:
Sounds like you tryed to downgrade your hboot to the Eng hboot. If that is what you did, then congradulations! You have successfully bricked your device! Hboots are generally NOT downgradable...especially 2.18 to eng
Click to expand...
Click to collapse
Yea, I was afraid that the wrong PC36IMG file was indeed used. Generally on the newer phones, any downgrade of the Hboot below 2.02 is a guaranteed brick. That's why Captain Throwback only recommends PC36IMG files down to Hboot 2.10 (the 2.02 ones don't work with S-ON phones). On the older hardware however, the Hboot can be downgraded to anything, including 0.76 from 2.18. I've done it on mines. You just have to know which hardware version and partition erasesize your phone has.
the one that i get from evohacks pc36img i think i need one way to flash a rom
the one i get from a post in htcevohacks
is the pc36img
if i brick my phone is there any way to unbrick
eddi2004 said:
the one i get from a post in htcevohacks
is the pc36img
if i brick my phone is there any way to unbrick
Click to expand...
Click to collapse
The best advice that I can give you is to reboot the phone into FASTBOOT USB (connect it to your computer, then go to your bootloader and click on FASTBOOT), then go back to the HTCdev site, start over and try to re-unlock your bootloader. If you can do that, then I may have a workaround for you If not, there might not be much else that you can do.
ok i did everything that u tell me n now i rename the zip (ss_stock_4.67.651) in PC36IMG n then reflash recovery-RA-supersonic-v2.3 now i can get into the recovery menu n i flash the rename (ss_stock_4.67.651) PC36IMG n i have a rom from sprint but now i still cant use adb command so what else shuld i do to recovery to normal n there r many issues that cant load like mail that is forced to sptop unexpected n thank u for all ur help!!
in the command window type:
Code:
fastboot oem enableqxdm 0and then:
Code:
fastboot reboot
eddi2004 said:
in the command window type:
Code:
fastboot oem enableqxdm 0and then:
Code:
fastboot reboot
Click to expand...
Click to collapse
Oh no. I don't know which tutorial you got those instructions from.
I'm also lost with your description of what happened. I hope you unlocked your bootloader, and can now boot into the operating system. If so, you were not suppose to rename the ss_stock_4.67 file to PC36IMG. You were suppose to flash that through RECOVERY as is. If I were you, I would go back to RECOVERY, and wipe All Factory/Reset (or whatever it says) and Dalvik-cache, then reflash the ss_stock file or another ROM.
Second, the adb commands only work from the operating system, not FASTBOOT. You need to be inside the operating system with your phone connected to your computer and USB Debugging enabled under Settings/Applications.
ok here i am
i change the name cos the bootloader let me flash the recovery amon ra 2.3 then i can see the recovery menu n i flash the rom named pc36img n give me the sprint w/ errors now i download another rom that i flash n now my computer can read the sdcard but im still locked n i dont know if im still rooted so the what i think is i have a usb brick so i need to unbrick my usb to use the adb command so i apreciate ur help w/ this thanks all of u for ur help

[Q] Will I save my htc Desire?

Dear all,
I have been looking around the forums and downloaded a few things and looked at various solutions, but I am stuck at the first hurdle.
I have been given an htc Desire Bravo that just will not boot. I do not know how it failed originally but I can only get it into the boot screens, either the fastboot/hboot logon ot the 5 buzzes and the htc logo lock. Also it takes about 30 minutes with the battery out after every failed boot attempt to restart the boot screen.
I have run adb but it cannot tell me a cid number, I have a micro sd card in it but it does not have the pb99diag.zip on it. When I put such a file on the sd card it does not find it. Communication via adb and the phone has varied success. I suspect it is drivers and what I read is an old adb bug where server is out of date.
I have never done this before this weekend so please be gentle with me!
If I can get it to work, even to use it like a wifi tablet without phone I would be happy. I am in the UK and if we have real success I would get it on tesco PAYG
I get the "cannot find pb99diag.zip etc" dialogue when going into hboot.
The logon says
BRAVO PVT-1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO 5.11.05.27
AUG 10 2010, 17:52.18
Can someone suggest where to start? I have tried a number of guides on the forum but no success so far. Even just getting an os running would be success. I will be looking at this each evening so apologies if I seem slow to respond
Thanks
Adrian
First make S-Off. I forgot how but if i think right, you must it do via revolutionary, If it success, then download 4ext recovery.IMG and flash it via fastboot and reboot in bootloader in your recovery
Sent from my HTC Desire using XDA Free mobile app
battlekaier said:
First make S-Off. I forgot how but if i think right, you must it do via revolutionary, If it success, then download 4ext recovery.IMG and flash it via fastboot and reboot in bootloader in your recovery
Sent from my HTC Desire using XDA Free mobile app
Click to expand...
Click to collapse
Thank you battlekaier, I will try this out tonight when I get home and will report back.
A
ukubuntu said:
Thank you battlekaier, I will try this out tonight when I get home and will report back.
A
Click to expand...
Click to collapse
After you s off u can flash hboot the easy way but first s off.
Sent from my HTC Desire using XDA Free mobile app
If u phone does not boot then u can NOT s-off, ur phone needs to be booted.. also if ur s-on and not rooted then all u can do is flash a ruu.
Did u try factory reset from bootloader menu? Try that first, u never know but chances r ul prob need to ruu a ruu.
jmcclue said:
If u phone does not boot then u can NOT s-off, ur phone needs to be booted.. also if ur s-on and not rooted then all u can do is flash a ruu.
Did u try factory reset from bootloader menu? Try that first, u never know but chances r ul prob need to ruu a ruu.
Click to expand...
Click to collapse
Hi jmcclue,
Thanks for the comments. I can boot to the HBoot and Fastboot screens, thats how I could find the S-ON and version data. If I get it to reboot, I get either a white screen with just "htc" on it, or 5 buzzes and a screen with no life at all. I am hopeful to get it to S-OFF as I have had some communication through the usb to pc connection. I am not sure if I can do an RUU update as I don't seem to have a CID. I do not have a factory reset option on the HBOOT screen. I have tried clear storage but that has no effect. Perhaps I need the S-OFF first.
Cheers again,
A
Use the 2.3gb update ruu its wwe (world wide english) so dont worry bout cid. U can find it in bortaks troubleshooting guide in resources section and its naned 2.3.3 ruu. U will find it easy enough in google aswell. Search for "htc desire 2.3gb update" its a exe file so just boot ur phone into fastboot, plug in ur phone and run the ruu, hopefully it willvwork. Im a bit worried tho about the 5 vibrations u get, maybe a sign of hardware failure. But try that ruu anyway. And again u can not get s-off unless ur phone is fully working/booted.
jmcclue said:
Use the 2.3gb update ruu its wwe (world wide english) so dont worry bout cid. U can find it in bortaks troubleshooting guide in resources section and its naned 2.3.3 ruu. U will find it easy enough in google aswell. Search for "htc desire 2.3gb update" its a exe file so just boot ur phone into fastboot, plug in ur phone and run the ruu, hopefully it willvwork. Im a bit worried tho about the 5 vibrations u get, maybe a sign of hardware failure. But try that ruu anyway. And again u can not get s-off unless ur phone is fully working/booted.
Click to expand...
Click to collapse
Many thanks
Well that was a bit wierd
If anyone can see where I went wrong, feel free to say.
I could not seem to get the link between the phone and the pc so I removed the htc sync and restarted the pc. I could then connect to the phone in some way as abd gave a command error when I sent a fastboot oem readcid which it normally does. So leaving it in fastboot with usb I ran the wwe~.exe file and it all seemed to be doing installing. There were tens of installations going to the phone I guess each reaching 100%. Suddenly I had a web page popup in my browser s.rev2pub.com/ul_cb/player.html?a=19471543&context=c23573548&size=800x600&rt=popunder&ci=10&cb=[CACHEBUSTER] recommending I download latest drivers. The wwe ruu vanished and I have no continuing processes in Task manager that I can see.
So, should I have installed in hboot? Thankfully I can still get the phone to power on. What should happen after the exe file installs?
I am able to get some response from the phone as adb devices returns the phone device number. So I hope I can try again.
Any thoughts?
Many thanks
Revolutionary S-OFF and recovery
ukubuntu said:
Dear all,
I have been looking around the forums and downloaded a few things and looked at various solutions, but I am stuck at the first hurdle.
I have been given an htc Desire Bravo that just will not boot. I do not know how it failed originally but I can only get it into the boot screens, either the fastboot/hboot logon ot the 5 buzzes and the htc logo lock. Also it takes about 30 minutes with the battery out after every failed boot attempt to restart the boot screen.
I have run adb but it cannot tell me a cid number, I have a micro sd card in it but it does not have the pb99diag.zip on it. When I put such a file on the sd card it does not find it. Communication via adb and the phone has varied success. I suspect it is drivers and what I read is an old adb bug where server is out of date.
I have never done this before this weekend so please be gentle with me!
If I can get it to work, even to use it like a wifi tablet without phone I would be happy. I am in the UK and if we have real success I would get it on tesco PAYG
I get the "cannot find pb99diag.zip etc" dialogue when going into hboot.
The logon says
BRAVO PVT-1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO 5.11.05.27
AUG 10 2010, 17:52.18
Can someone suggest where to start? I have tried a number of guides on the forum but no success so far. Even just getting an os running would be success. I will be looking at this each evening so apologies if I seem slow to respond
Thanks
Adrian
Click to expand...
Click to collapse
Hey Adrian, I had the same problem as you did, hopefully I can be of help.
First, like everyone else is saying you will need S-OFF.
To do this head to this site on your PC revolutionary.io hit download for windows or Linux or whatever your pc is running, then you will need to fill out information about your device (see attached screenshot). Device, HBoot number, and serial number, (the serial number can be found behind the battery of your device). Once you have done that, click "Generate Key". it will give you a key, remember it or write it down.
Then, open the file that was downloaded, and extract the contents to your documents and Run the revolutionary( should look like the screenshot attached). Plug your device in (assuming you have the drivers) and it should ask you to enter the beta key we had before. Enter that and hit enter. it will then S-off your Desire and soon ask if you would like to install a custom recovery. hit Y and then enter, once that is finished, unplug your device and in HBoot go to "Recovery". Now you can flash a ROM of your choice.
Hopefully I made sense!
Best of luck
Neibaf97 said:
Hey Adrian, I had the same problem as you did, hopefully I can be of help.
First, like everyone else is saying you will need S-OFF.
To do this head to this site on your PC revolutionary.io hit download for windows or Linux or whatever your pc is running, then you will need to fill out information about your device (see attached screenshot). Device, HBoot number, and serial number, (the serial number can be found behind the battery of your device). Once you have done that, click "Generate Key". it will give you a key, remember it or write it down.
Then, open the file that was downloaded, and extract the contents to your documents and Run the revolutionary( should look like the screenshot attached). Plug your device in (assuming you have the drivers) and it should ask you to enter the beta key we had before. Enter that and hit enter. it will then S-off your Desire and soon ask if you would like to install a custom recovery. hit Y and then enter, once that is finished, unplug your device and in HBoot go to "Recovery". Now you can flash a ROM of your choice.
Hopefully I made sense!
Best of luck
Click to expand...
Click to collapse
Thank you Neibaf97
Can I confirm that I can do this from the HBOOT screen or the fastboot screen? Also where jmmclue said if I can't boot then I can't S-Off, does that mean boot to the HBOOT screen or into Android? Then if I want to load say WWE, do I put that on a microSD to get it to recover?
thanks again
A
ukubuntu said:
Thank you Neibaf97
Can I confirm that I can do this from the HBOOT screen or the fastboot screen? Also where jmmclue said if I can't boot then I can't S-Off, does that mean boot to the HBOOT screen or into Android? Then if I want to load say WWE, do I put that on a microSD to get it to recover?
thanks again
A
Click to expand...
Click to collapse
He means into android.
Sent from my HTC Desire using XDA Free mobile app
lilsafbig said:
He means into android.
Sent from my HTC Desire using XDA Free mobile app
Click to expand...
Click to collapse
Thanks lilsafbig, that was a little too ambiguous to understand, but I have a few developments.
I am able to communicate to some degree with adb between phone and pc. Before I was unable to get anything back but now with the right syntax I have got back the CID as HTC_001 and the device number. But when I run revolutionary from the fastboot USB screen the revolutionary continues to wait for the device to show. Is it likely that USB degugging was off prior to the failure, is there a way to get it on. I suggest this as when I connect it to my pc it recognizes the device and shows in the device manager as an htc unspecified device (this is progress). As I cannot boot android it does not show as an additional drive in file manger. when I try some of the fastboot oem commands I get bad command errors, whilst fastboot getvars is ok. Could this be why I cannot get revolutionary to S-OFF!
Thanks
additional info, when usb is in an in fastboot usb, the device manager sees it as android 1.0
ukubuntu said:
additional info, when usb is in an in fastboot usb, the device manager sees it as android 1.0
Click to expand...
Click to collapse
also tried "fastboot oem writecid 11111111" and got "FAILED(remoteartition is not existed).."
ukubuntu said:
also tried "fastboot oem writecid 11111111" and got "FAILED(remoteartition is not existed).."
Click to expand...
Click to collapse
So..... does this mean I am bricked?
BUMP!
ukubuntu said:
So..... does this mean I am bricked?
Click to expand...
Click to collapse
If you can still get to bootloader / fastboot screen, then you are rarely ever bricked.
1. Ignore anything and everything to do with revolutionary and fastboot for now. I'm afraid the first few posts while trying to be helpful have been misleading. Get your phone booting up into Android OS first, i.e. into a stock ROM using an RUU
2. Use the 2.3.3. GB RUU, nothing else, it doesn't need a goldcard or care about CID etc.
3. Download it from the bottom here, then use Bortak's troubleshooting guide stickied to the top of Q&A, Point [7] to run it as a PB99IMG.zip from the root of your sdcard. That way you don't need to run it through USB or care about what drivers are installed.
Thank you Eddie, I will try that. I did try flash a PB99IMG.zip before with no success but I will try again.
I found it here Official Stock Sense Gingerbread_v1.2 GB-2.3.3_A2SD – http://androidba.se/J7 for desire (neophyte)
I hope it can work out ok. I guess I format the sd card to fat32 not ext4
Will let you know how it goes.
Thanks,
A
ukubuntu said:
Thank you Eddie, I will try that. I did try flash a PB99IMG.zip before with no success but I will try again.
I found it here Official Stock Sense Gingerbread_v1.2 GB-2.3.3_A2SD – http://androidba.se/J7 for desire (neophyte)
I hope it can work out ok. I guess I format the sd card to fat32 not ext4
Will let you know how it goes.
Thanks,
A
Click to expand...
Click to collapse
That's a custom rom.
Here's the link for the 2.3.3 ruu.
http://www.theandroidsoul.com/downl...uu-now-to-update-to-to-the-latest-android-os/
Sent from my HTC Desire using XDA Free mobile app
ukubuntu said:
I did try flash a PB99IMG.zip before with no success but I will try again.
I found it here Official Stock Sense Gingerbread_v1.2 GB-2.3.3_A2SD – http://androidba.se/J7 for desire (neophyte)/
Click to expand...
Click to collapse
That did not work because the file is not an RUU...it is a stock rooted custom ROM with A2SD (the clue is in the name). It is designed to flashed in recovery like any other ROM. Renaming it to PB99IMG.zip won't do anything.
Use the actual shipped roms RUU link provided.
Reformat your sdcard to a single FAT32 partition if necessary, then follow Method [7] of the guide, place only the PB99IMG.zip on the root of the sdcard (not in any folder)

Categories

Resources