Coming from an S2, so I'm not sure what purpose jigs had for the S3. By habit I popped one into my S4 earlier, and it booted up into download mode. The only difference I noticed was instead of saying "Odin Mode" at the top, it said "Factory Mode".
Is there a difference between the two modes? Any reason to use/not to use a jig to get into download mode on this device?
Toleraen said:
Coming from an S2, so I'm not sure what purpose jigs had for the S3. By habit I popped one into my S4 earlier, and it booted up into download mode. The only difference I noticed was instead of saying "Odin Mode" at the top, it said "Factory Mode".
Is there a difference between the two modes? Any reason to use/not to use a jig to get into download mode on this device?
Click to expand...
Click to collapse
It's the same thing. The only thing a JIG is for is if you have trouble getting into download mode manually or want to skip the warning screen when you enter manually.
KillaHurtz said:
It's the same thing. The only thing a JIG is for is if you have trouble getting into download mode manually or want to skip the warning screen when you enter manually.
Click to expand...
Click to collapse
That's what I thought, thanks! On the S2 it was also used to reset the odin counter and such...I haven't seen a counter in download mode so I assume that was taken out.
Toleraen said:
That's what I thought, thanks! On the S2 it was also used to reset the odin counter and such...I haven't seen a counter in download mode so I assume that was taken out.
Click to expand...
Click to collapse
I beleive it now says "UNOFFICIAL" on the Phone info screen when you root.
Toleraen said:
That's what I thought, thanks! On the S2 it was also used to reset the odin counter and such...I haven't seen a counter in download mode so I assume that was taken out.
Click to expand...
Click to collapse
Sorry, the jig does not reset any counter. It forces the unit into download mode, nothing more.
Related
the phone does not boot up . when i power on, a screen saying :
odin mode
product name: t989
custom binary download: no
current binary: samsung official
(mobile)--!--(PC)
"Firmware upgrade ecountered an issue. please select recovery mode in Kies & try again.".
I have tried to connecting it to kies but its not recognzied. any suggestions?
Odin stock
jangst123 said:
Odin the ROM below.
If you still can not get it to boot, Odin the Kernel
[STOCK] T-Mobile Samsung Galaxy S II Stock Kernel // UVKID
Originally Posted By: bubby323
and
[ROM] SGH-T989 // UVKID // Stock // Deodexed // Rooted //Busybox
Click to expand...
Click to collapse
Sent from my SGH-T989 using xda premium
mickeycobra04 said:
the phone does not boot up . when i power on, a screen saying :
odin mode
product name: t989
custom binary download: no
current binary: samsung official
(mobile)--!--(PC)
"Firmware upgrade ecountered an issue. please select recovery mode in Kies & try again.".
I have tried to connecting it to kies but its not recognzied. any suggestions?
Click to expand...
Click to collapse
Sent from my SGH-T989 using xda premium
how can i get odin to read my device if my device is stuck in the screen mentioned and when i enter download mode through usb connecting, takes me to the warning screen!! but when i press volume up it doesnt go into the next step, it goes straight to the same screen that i mentioned. thanks for replying btw, your the only person thats helped me out since i started searching for help.
Did you try the button combo to get into download/odin mode? If so you need to get a usb jig to force it into download mode so you can flash back to stock via odin
Sent from my SGH-T989 using xda premium
Same thing happened to me. Just have Odin open and ready to go, plug phone into DL mode just like normal, when the screen pops up give Odin a second or two and then you should see the com light up yellow as Odin recognise your device. Start the flash and let Odin do it's thing and it will reboot and all will be fine.
quest4fire said:
Did you try the button combo to get into download/odin mode? If so you need to get a usb jig to force it into download mode so you can flash back to stock via odin
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
i can get into download mode by plugging usb while holding the vol up/vol down. but when it asks me to press vol up, it takes me to the same screen with "phone-!-PC".
wannagofast said:
Same thing happened to me. Just have Odin open and ready to go, plug phone into DL mode just like normal, when the screen pops up give Odin a second or two and then you should see the com light up yellow as Odin recognise your device. Start the flash and let Odin do it's thing and it will reboot and all will be fine.
Click to expand...
Click to collapse
Ok, just tried this method, when i get into download mode i click vol up and continues to the screen im stuck on. odin still didnt recognize my phone
me 2
im having the same issue with my phone. i googled around it saw ppl with the same issue, but when ppl fix their problem they didnt say how. i left a post on 3 of the threads (including 1 not on xda) but i havent received a response. i tried the hold the buttons method, the delete kies method, the just let odin flash a rom over but when odin gets to "cashe" it fails everytime. i hope i can find a fix, cuz ppl are having this problem and fixing there phone pretty quickly.
did u reinstall the drivers just asking
kdog808 said:
did u reinstall the drivers just asking
Click to expand...
Click to collapse
yeah, i re-installed the samsung kies drivers and deleted running apps in task manager. i also re-installed phone drivers to my cpu. and i re-installed odin to the cpu and restarted the cpu after each method. nothing worked!!! i also tried holding the vol+home+power button, but the error message just pops up.
Yeah my phone is soft bricked I really need to get into download mode without this annoying message
Trevnerdio said:
Yeah my phone is soft bricked I really need to get into download mode without this annoying message
Click to expand...
Click to collapse
Try the second link in the second post. It worked for me. The post with the headline Odin Mode
if your screen has a pc and a warning symbol you still can odin,
open oding and conect your phone to pc while that screen you are saying pops up then see if odin recognizes..
darocsfinest1 said:
Try the second link in the second post. It worked for me. The post with the headline Odin Mode
Click to expand...
Click to collapse
I already did that plus everything else possible :\
Trevnerdio said:
I already did that plus everything else possible :\
Click to expand...
Click to collapse
have you tried reinstalling kies, try it thats what i did. i was in the same screen, it was never read by odin until i did exactly that.
mickeycobra04 said:
have you tried reinstalling kies, try it thats what i did. i was in the same screen, it was never read by odin until i did exactly that.
Click to expand...
Click to collapse
My device is read by Odin and it flashes things. Once I flash a working rom though, it bootloops and I have no recovery to wipe data. I've never been able to get the repartition function to work
And the error I keep receiving every time almost is an error about line 1876. I have no idea what this is. I Googled it and I can't find it.
FWIW My phone would not go into download mode to save my life. I then decided to try the OE Samsung cable instead of the motorola cable I had been using and it worked right away.
Troubleshooting 101, start with the basics.
So I have the same problem as the OP. The only screen I boot to is mobile ! PC in Odin mode. This happened after I was rooted with my stock rom and CWM, but tried to do the OTA update from Kies.
My device is recognized by Odin utility, so I tried what the 2nd poster put and used Odin to flash the stock kernel (UVKID tar) from the PDA button and it failed. I used the default settings in Odin, but maybe I didn't set one right? I have attached a screen shot.
So now do I use Odin to flash the stock recovery? I'm working on making a USB jig in case that will help.
UPDATE: I was able to use Odin to flash the Stock Recovery. Now it boots up like normal. I would like to try the OTA update through Kies again, but I'm worried. Any suggestions?
Kies Firmware Emergency Recovery
mickeycobra04 said:
the phone does not boot up . when i power on, a screen saying :
odin mode
product name: t989
custom binary download: no
current binary: samsung official
(mobile)--!--(PC)
"Firmware upgrade ecountered an issue. please select recovery mode in Kies & try again.".
I have tried to connecting it to kies but its not recognzied. any suggestions?
Click to expand...
Click to collapse
OK the somewhat hidden Firmware Recovery built into Kies is not to hard to find,
First you will need to write on a piece of paper your S/N and your Model #, the same way it is written under the battery on the sticker.
Second boot your phone into download mode and connect it to the computer.
Third open Kies, select the tools drop down menu.
Now you have a choice. Select Firmware Emergency Recovery to recover your current firmware version... or select Firmware Upgrade and Initialization to install the latest OTA, either way just fallow the steps on screen and when done your will have a working phone.
hit the thanks button if this helped
Bro you should check the dates out xD thx anyway though
Sent from my SGH-T989 using xda premium
Wonder if it would work on the SGS3 if for some reason it were to get bricked..
http://dx.com/p/unbrick-download-30...3514?rt=1&p=2&m=2&r=3&k=1&t=1&s=67186&u=93514
clockcycle said:
Wonder if it would work on the SGS3 if for some reason it were to get bricked..
http://dx.com/p/unbrick-download-30...3514?rt=1&p=2&m=2&r=3&k=1&t=1&s=67186&u=93514
Click to expand...
Click to collapse
I have one that I used on my Galaxy S II. It doesn't unbrick your phone. It just puts it into download mode, and on the S1 and S2, it would wipe the flash counter. You can already go into download mode, but this thing was your last effort to try and get into it if the button combination didn't work. On the S3, you need to use the Triangle Away app to flash the counter. All it does on the S3 is put it into download mode.
I watched a video a few weeks back from TotallydubbedHD here it is:
http://www.youtube.com/watch?v=TrZUrE5Nqj0&feature=plcp
he shows that he has a working jig from his galaxy s and demonstrates it working on the S3. (all credit to Totallydubbed)
Hope i helped
Regards
Jack
My phone is stuck at the samsung logo for about 30 min. I tried flashing another rom but it didnt work. I can access download mode but not recovery mode.
What is my possible solution?
If the 3 button method doesn't work you may be able try ADB to get into recovery.
Sent from my SGH-I747 using xda app-developers app
Thenewguy1 said:
If the 3 button method doesn't work you may be able try ADB to get into recovery.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
The three button method as in "Download Mode"?
ThatGuyIsEpic said:
My phone is stuck at the samsung logo for about 30 min. I tried flashing another rom but it didnt work. I can access download mode but not recovery mode.
What is my possible solution?
Click to expand...
Click to collapse
If you can get into download mode, then ODIN TWRP to your phone. Or ODIN the proper rooted ROM.
Sent from my SGH-I747
aybarrap1 said:
If you can get into download mode, then ODIN TWRP to your phone.
Sent from my SGH-I747
Click to expand...
Click to collapse
Do I flash TWRP in the PDA box on Odin?
Also note that I tried different usb cables and usb ports but nothing is working its still stuck at the boot screen
aybarrap1 said:
If you can get into download mode, then ODIN TWRP to your phone. Or ODIN the proper rooted ROM.
Sent from my SGH-I747
Click to expand...
Click to collapse
I flashed TWRP and tried booting into recovery mode but it doesnt work I get the samsung logo and in the top left hand corner I get recovery boot in blue text then after that it goes black
Is my device useless now?
aybarrap1 said:
If you can get into download mode, then ODIN TWRP to your phone. Or ODIN the proper rooted ROM.
Sent from my SGH-I747
Click to expand...
Click to collapse
All the ROMs I know require you to flash via ClockworkMod is there any ROMs you can flash with Odin?
ThatGuyIsEpic said:
I flashed TWRP and tried booting into recovery mode but it doesnt work I get the samsung logo and in the top left hand corner I get recovery boot in blue text then after that it goes black
Is my device useless now?
Click to expand...
Click to collapse
Vol up + home + power. When your device vibrates and you see the blue text, release just the power button
xbeerdroidx said:
vol up + home + power. When your device vibrates and you see the blue text, release just the power button
Click to expand...
Click to collapse
thank you so much i got it work :d
ThatGuyIsEpic said:
All the ROMs I know require you to flash via ClockworkMod is there any ROMs you can flash with Odin?
Click to expand...
Click to collapse
Uhhg
Just 5 minutes of reading and looking for and answer and you wouldn't have to make this thread -_-
http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Any of those firmwares will work on a i747
If you have a i747M or you're not ATT look here and select your correct phone information in the drop down boxes:
http://www.sammobile.com/firmwares/1/
These will restore you to factory, you will still have to root.
I still cant get my phone to work.
I have done this many times and the galaxy s3 logo comes up and then nothing..
I wasnt rooting my phone i was charging it last night.... the phone got hot so i unplugged. I tried to turn it on in the morning and it wouldnt turn on. i know how to put my phone in recovery mode, ive done it before but it wont. it will go into download mode but thats.about. it. I know i dont know much about phones but i know how to put it in recovery mode to clear the cache and that isnt working.... any thoughts?
jessicarabbit85 said:
I still cant get my phone to work.
I have done this many times and the galaxy s3 logo comes up and then nothing..
I wasnt rooting my phone i was charging it last night.... the phone got hot so i unplugged. I tried to turn it on in the morning and it wouldnt turn on. i know how to put my phone in recovery mode, ive done it before but it wont. it will go into download mode but thats.about. it. I know i dont know much about phones but i know how to put it in recovery mode to clear the cache and that isnt working.... any thoughts?
Click to expand...
Click to collapse
Does the phone actually connect to your pc? I assume you have the proper drivers installed? Open odin while in download mode and see if it detects the phone. Sounds as if the phone's bootloader is screwed. If its detected you should be able to fix without much trouble. Sometimes you have to flash the original stock rom as the newer ones sometime have trouble for whatever reason. Version 4.0.4 i believe.
scotteb said:
Does the phone actually connect to your pc? I assume you have the proper drivers installed? Open odin while in download mode and see if it detects the phone. Sounds as if the phone's bootloader is screwed. If its detected you should be able to fix without much trouble. Sometimes you have to flash the original stock rom as the newer ones sometime have trouble for whatever reason. Version 4.0.4 i believe.
Click to expand...
Click to collapse
I dont have odin on this computer, when i plug it in it isnt recognized, i assumed that was because it wasnt technically powered on. I guess i'll take it to someone tomorrow to have it looked at.... im so out of my element here... thanks.
jessicarabbit85 said:
I dont have odin on this computer, when i plug it in it isnt recognized, i assumed that was because it wasnt technically powered on. I guess i'll take it to someone tomorrow to have it looked at.... im so out of my element here... thanks.
Click to expand...
Click to collapse
If you can get the phone into download mode , it should auto install your drivers and make it recognizable by Odin.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Have a Bell Galaxy S3, and it won't boot past the Samsung boot screen. If i go into recovery mode, it doesn't show a recovery. If I go into download mode, it'll run and all I get is the little android dude BUT with no info showing in the top left corner.
Also when in download mode the phone isn't detected by any USB cable/port combo.
I know the battery is fresh because I'm using one i just charged to 100%
Any insight?
confyzone said:
Have a Bell Galaxy S3, and it won't boot past the Samsung boot screen. If i go into recovery mode, it doesn't show a recovery. If I go into download mode, it'll run and all I get is the little android dude BUT with no info showing in the top left corner.
Also when in download mode the phone isn't detected by any USB cable/port combo.
I know the battery is fresh because I'm using one i just charged to 100%
Any insight?
Click to expand...
Click to collapse
Have you gone through the steps to troubleshoot a connectivity issue?
King Ding-a-ling said:
Have you gone through the steps to troubleshoot a connectivity issue?
Click to expand...
Click to collapse
yes i have, not my first rodeo with these devices, the fact I have no recovery mode and download mode shows no odin info is a concern
confyzone said:
yes i have, not my first rodeo with these devices, the fact I have no recovery mode and download mode shows no odin info is a concern
Click to expand...
Click to collapse
The recovery is most likely corrupted. The download mode, yea, that is a wierd issue not showing info. What is showing in your device manager? Anything Samsung related?, and have you tried Kies 'Emergency F/W Recovery'?
Hey all...and to answer the number one question, yes I did do A TON of searches already to find a solution...PLEASE HELP if you have the knowledge
Phone Model: Galaxy S III (SPH-L710) Sprint 16gb
Firmware/ROM: All stock and never tried ANY customization
Problem: I think the problem happened when the phone auto updated to 4.3. Now when the phone tries to boot it just boots to the second Samsung "Samsung Galaxy S III" screen, reboots and then will get to the same screen and just sits there. One time I even let it sit there for 30 minutes just to see if it needed the ridiculous amount of time. When I try to get the phone into recovery mode (Volume UP/Home key/then the Power key) it will boot and on the first Samsung "Samsung" screen, in the top left corner in small print, it shows "booting recovery...". Then it will just go strait to the second Samsung screen then keeps rebooting twice before it will just stop on the second Samsung screen again. When I try to get the phone into ODIN mode (Volume DOWN/Home key/then the Power key) it will boot asking me if I'm sure and to press Volume UP to continue. Once I press Volume UP, to continue, I get to ODIN mode. In the top left corner it shows...
ODIN MODE
Product Name: SPH-710
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
(all grayed out) Qualcomm Secureboot: ENABLE
Then in the middle of the screen is the little Android guy. Below that it shows, "Downloading..." "Do not turn off target!!". And it just sits there doing nothing else.
I'm pretty sure I have done everything I could possible do to get it working again. From what I understand there may be other things I can do. Worse case scenario, if I must, I would be willing to loose everything on the phone and start over from scratch, if that's even possible.
There has to be some VERY smart people on here that can help me. This is my wife's phone and we don't have an upgrade until May...PLEASE HELP. Thanks all!!!
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
jimchee said:
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
I already downloaded latest versions of both. It states, from phone off and unplugged, start phone using ODIN/download route then immediately plug into PC then open ODIN and click the button....but I cant get that far because ODIN app on PC never recognizes the phone to be able to do so.
I'm now starting to get very discouraged because i'm seeing in some places that the device needs to be put into USB debugging mode. Please tell me this isn't true. Because there has never been any reason to put the phone into USB debug mode.
Can someone please confirm this. I'm really crossing my finger that there is a way to do this without needing to be in USB debug mode...PLS PLS PLS!!!
Thanks for your reply
http://forum.xda-developers.com/galaxy-s3-sprint/help
jimchee said:
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
He has the Sprint version, get the one for d2spr, correct?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
DirtTrash said:
I already downloaded latest versions of both. It states, from phone off and unplugged, start phone using ODIN/download route then immediately plug into PC then open ODIN and click the button....but I cant get that far because ODIN app on PC never recognizes the phone to be able to do so.
I'm now starting to get very discouraged because i'm seeing in some places that the device needs to be put into USB debugging mode. Please tell me this isn't true. Because there has never been any reason to put the phone into USB debug mode.
Can someone please confirm this. I'm really crossing my finger that there is a way to do this without needing to be in USB debug mode...PLS PLS PLS!!!
Thanks for your reply
Click to expand...
Click to collapse
You have to plug the device in from download mode AFTER Odin is running. So, phone in download mode, start Odin, then plug in. Before you go that far are you letting go of the buttons when trying to get to recovery as soon as you seen 'recovery starting' in the top left corner or are you still holding them? If you do not let go the device will continue to attempt a normal boot. If you can get into recovery and do a factory restore it very well may solve your boot issue.