Develop Bugs

Slide Isssue. $$$ Reward.

This goes under development because its a problem with my phone regarding the development so before the cyanogen rom release i had eugene's froyo5 and it worked fine.. well my fiance picked up the phone ****ed around with it and now no matter what 2.2 rom i use i can't get INTERNET sites to load or.. MARKET to sync my account or communicate this is with cyanogen rom and eugene's froyo6.. now my wifi will see connections connect and even gather info/ip addy from the wifi however it will not let me load pages ect.. now in 2.1 running the old RADIO + Slidemeroot5 or whatever it's called the stock with root it will go into the wifi/find/communincate and load my MARKET/INTERNET just fine.. so it has to be with a setting that would stay threw data/cache wipe with Cyanogen Kanged heres the thing.. I've wiped many times I've even tried restoring old backups from froyo5 they no longer let me sync/internet/market so.. anyone who can find a solution will receive an IMMEDIATE $20.00 donate and if done in a timely fashion an addition $10.00...
I will not be able to RE-ROOT or UN-ROOT my phone as i do not have my USB cable anymore

check your APN settings dude

Virus, what is with you and trouble?! You two always seem to find each other...
Tuba is right it sounds like your apn settings are wrong or deleted.

tubaking182 said:
check your APN settings dude
Click to expand...
Click to collapse
what do you mean?
sino8r said:
Virius, what is with you and trouble?! You two always seem to find each other...
Click to expand...
Click to collapse
No... Bad-Luck and me seem to be on everyday terms

Your not on t-mobile, so you need to change your APN settings to att

settings>wireless settings>mobile networks>apn settings, then you should be able to add the correct APNs or see what is listed there

tubaking182 said:
settings>wireless settings>mobile networks>apn settings, then you should be able to add the correct APNs or see what is listed there
Click to expand...
Click to collapse
no APN listed

Virus1x said:
what do you mean?
No... Bad-Luck and me seem to be on everyday terms
Click to expand...
Click to collapse
Lol! Yeah, it sounds about right. I have'd had that streak before.
menu, settings, wireless networks, mobile networks, access point name
Google tmobile apn android and they'll list the proper apn settings. I don't have time to type them all out right now.
oppsy, I see some folks beat me to it and you need the at&t settings anyways. Just google at&t android apn settings. That should do it.

you will need proper APN setting for your carrier, google that shiz and you should be good to go, then you will just need to add the APN to your phone from that same screen
apns are different for each carrier, google APN <carrier> mytouch slide(or just android)

sino8r said:
Lol! Yeah, it sounds about right. I have'd had that streak before.
menu, settings, wireless networks, mobile networks, access point name
Google tmobile apn android and they'll list the proper apn settings. I don't have time to type them all out right now.
Click to expand...
Click to collapse
I don't have a DATA plan so data is turned off will this matter? also I'm on AT&T

Virus1x said:
I don't have a DATA plan so data is turned off will this matter? also I'm on AT&T
Click to expand...
Click to collapse
Huh? No data plan huh. Yeah, that will matter. Umm, so you have been using wifi to access internet right?
Okay from what I understand... wifi is real iffy with the 2.2 ports. You might have to select static and type in your ip settings from your pc. Just go on the pc and run command prompt and type ipconfig. That will tell your ip setting and enter them into the correct slots on your phone. Its under menu settings wireless& networks wifi settings menu advanced select static ip

well is data is off then you aren't going to be getting on the interwebs, are you saying that with wifi you can't load pages?

tubaking182 said:
well is data is off then you aren't going to be getting on the interwebs, are you saying that with wifi you can't load pages?
Click to expand...
Click to collapse
Yeah, he's basically saying wifi isnt sending data to the phone. I edited my previous post to show him how to set up a static network.

tubaking182 said:
well is data is off then you aren't going to be getting on the interwebs, are you saying that with wifi you can't load pages?
Click to expand...
Click to collapse
yes I had wifi working fine on newslide.zip or myupdate.zip from eugene and all builds before in last 2 days wifis has stopped working... unknown why

Reread the first post. It says my WIFI will connect info and all that and above he states he doesn't have a data plan so its going to have to be wifi hes on.
Now I am having the same problem ever since I flashed the ROM and wiped twice and reflashed twice. Trying static IP now.

alas no luck on STATIC, question is why would I need to set up static when it should auto connect and auto know ya know? i'd like to be able to use WIFI outside of my home aswell

So right now it doesn't work on any rom now? If it's the cyan kernel, try dumfuq's oc kernel, I know it sounds strange but i tried one of cyan's kernel and somethings stopped working, led flashlight is one...Tried the new dumfuq and it worked for me. No promises though that it will work for your wifi problem.

your ip address of your router is 192.168.0.1 which means that your IP address of your phone will have to be 192.168.0.x since the computer is 192.168.0.199 i would try something around the 199 range(try going plus or minus 10) so either 192.168.0.189 or 192.168.0.209
also you will have to set subnet mask to 255.255.255.0 and gateway to 192.168.0.1

Ace42 said:
So right now it doesn't work on any rom now? If it's the cyan kernel, try dumfuq's oc kernel, I know it sounds strange but i tried one of cyan's kernel and somethings stopped working, led flashlight is one...Tried the new dumfuq and it worked for me. No promises though that it will work for your wifi problem.
Click to expand...
Click to collapse
will attempt wipe..
flash cyanogen rom
flash kernel
flash new radio
flash GAPPS
and tell ya
allows for surfing via browser doesn't fix my Market/google issue
ERROR from Market..
You don't have a network connection.
This could be a temporary problem or your phone may not be provisioned for data services. please try again when connected to a mobile network or connect to a wifi network, if the problem continues call customer service..
then gives me option to connect to wifi but i am connected

Virus1x said:
I don't have a DATA plan so data is turned off will this matter? also I'm on AT&T
Click to expand...
Click to collapse
If it worked before on myfroyo 5, then push the apn.conf into /system/etc
or
You can try pushing the apn.conf file from the aria into /system/etc
then do a factory reset..
may or may not work
~Eugene

Need Help, Friend Updated with Froyo OTA and Now No 3G Data?!?!?!

A good friend of mine waited to receive the OTA update of Froyo for his Incredible and when he got it he installed it. The bad part that I need help with is that when his phone rebooted it wouldn't allow the 3G data network to work. That section in settings is greyed out saying "Turning on..." and will not connect. The phone portion runs just fine. I have since returned the phone back to 2.1 and the same problem persists. If someone could help us out that would be awesome!!!

This probably wasn't posted in the right section...
I had an issue with 3G not connecting after downloading the froyo OTA off the internet and applying it as an update.zip.
I'm not sure if this is the same thing, but mine seemed to be that it wouldn't switch from the wifi network to the 3G network after getting out of range of the wifi (its set to auto connect to my home wifi, so it went straight to that after I rebooted it after the update). Then it wouldn't connect with the wifi off. I think I turned off both wifi and 3G and rebooted it with them off, and then turned back on 3G, and it worked. Everything is working normally now.
I'm not really sure why this would happen, I was wondering if it possibly had something to do with the phone registering itself after the update, and then not registering the 3G because it was on wifi and sort of "forgot?" That's just idle speculation though...
Also you might want to clear out your cache.
This might not be related to your problem, but I hope it helps!

LordCaptain said:
This probably wasn't posted in the right section...
I had an issue with 3G not connecting after downloading the froyo OTA off the internet and applying it as an update.zip.
I'm not sure if this is the same thing, but mine seemed to be that it wouldn't switch from the wifi network to the 3G network after getting out of range of the wifi (its set to auto connect to my home wifi, so it went straight to that after I rebooted it after the update). Then it wouldn't connect with the wifi off. I think I turned off both wifi and 3G and rebooted it with them off, and then turned back on 3G, and it worked. Everything is working normally now.
I'm not really sure why this would happen, I was wondering if it possibly had something to do with the phone registering itself after the update, and then not registering the 3G because it was on wifi and sort of "forgot?" That's just idle speculation though...
Also you might want to clear out your cache.
This might not be related to your problem, but I hope it helps!
Click to expand...
Click to collapse
Thanks for your effort, it did not work unfortunately.

Did he happen to have anything that controls 3G installed? Tasker? Juicedefender?
If he powered off while the data we disabled, and updated, then 3G won't work. Period.
I've heard of ways of restoring the APN or something, search the forums on that.

gmichaelow said:
Did he happen to have anything that controls 3G installed? Tasker? Juicedefender?
If he powered off while the data we disabled, and updated, then 3G won't work. Period.
I've heard of ways of restoring the APN or something, search the forums on that.
Click to expand...
Click to collapse
He did not have any type of app like that. He is a very novice user. I tried searching for restoring APN with no luck, anyone else?

When I first flashed Virtuous2.0 and did the initial setup, I didn't get 3G either. I'm pretty sure a good old fashioned *228 did the trick. I did have a backup through APN Backup & Restore, but didn't need to use it.

Have you tried turning on the airport mode, rebooting, turning off airport mode. Or perhaps do a *228?

enomele said:
When I first flashed Virtuous2.0 and did the initial setup, I didn't get 3G either. I'm pretty sure a good old fashioned *228 did the trick. I did have a backup through APN Backup & Restore, but didn't need to use it.
Click to expand...
Click to collapse
Tried it and no luck.

cooksalot said:
Have you tried turning on the airport mode, rebooting, turning off airport mode. Or perhaps do a *228?
Click to expand...
Click to collapse
Tried this too and no luck.

Go to Verizon and tell them to fix it fix fix it fix it! If he's running stock its nothing he did. Sounds super bunk that they finally got froyo only to not be able to use 3g.

The loss of 3g data is a bug with the froyo builds. All the froyo roms and the official ota have this issue.
sent from my Droid Incredible using XDA app.

this just happened to my friend too. I updated his phone last week with the OTA and since then he hasn't had 3g, but wifi would work.
did a rom manager backup before hand though, so i told him to revert back, and everything is working again. not sure why flashing back didn't work for you

So he hasn't had 3g at all? He can make calls and a *228 option # 1 doesn't update his settings and reboot? Maybe something when wrong on the install, whats hboot say?
Assuming he's completely stock I'd suggest going to the Verizon store and having them try.

[Q] Is Wifi Calling Missing in CM7 on purpose?

I've done several Google searches on this topic as well as focused searches on the CM and XDA forums; I figured it was time to just ask the question myself.
So I noticed that Wifi Calling started missing in in the CM7 nightlies sometime after #21. I ran across someone from the CM forums who saw theirs returned after his upgrade from #28->#30 (which I did not see on mine even after a full wipe).
Is there a setting or condition on my phone that prevents me from seeing/activating this feature?
Thanks in advance,
Reg

I've been running CM7 since build number 0 and now I'm on build 31, I have flash every nightly released and have always had wifi calling on every single build.
Sent from my HTC Vision

joemm said:
I've been running CM7 since build number 0 and now I'm on build 31, I have flash every nightly released and have always had wifi calling on every single build.
Sent from my HTC Vision
Click to expand...
Click to collapse
So I did a clean install of #21, which had wifi calling, but when I upgraded to 22, it was gone. Might anyone else know what I can do to install?
Thanks,

When you are upgrading, what are you wiping? You only need to wipe cache.
Sent from my HTC Vision

joemm said:
When you are upgrading, what are you wiping? You only need to wipe cache.
Sent from my HTC Vision
Click to expand...
Click to collapse
I've tried multiple things: cache wipes, no wipes, "clean" installs, manually formatting each mount point. None of that matters for me. Wifi calling only shows up in builds up-to-and-including 21; after that, it just vanishes.
Thanks for trying though, dude.

As i installed the CM 7.0.0-RC1 with Nightly version 2. and i found the same thing means WIFI is not working but when i press the power button and found the option REBOOT and select this option and then again i select the option REBOOT, Phone rebooted and then turn on wifi and it started working. so all you have to do is to Reboot the phone as i said. you will hopefully find your WIFI option working.
as i had the same.

wasie said:
As i installed the CM 7.0.0-RC1 with Nightly version 2. and i found the same thing means WIFI is not working but when i press the power button and found the option REBOOT and select this option and then again i select the option REBOOT, Phone rebooted and then turn on wifi and it started working. so all you have to do is to Reboot the phone as i said. you will hopefully find your WIFI option working.
as i had the same.
Click to expand...
Click to collapse
Yes, it is well known that a first reboot is required to get WiFi working on CM7 right now. OP's question, however, is about the missing WiFi calling application.
OP, that's very interesting that it won't show up. So if you do a clean full wipe and install of something like RC1 or higher, you still don't get WiFi calling? Mine has been in there on every build... hmm..

I did'nt Wipe the Cache , I did the reset factory settings option. and install the CM7.0.0-RC1 with nightly version 2. and after done i found the wifi option is not working.
as i told when i rebooted the phone and i found the wifi option working.

Do you have a g2 or a desire z? I am looking at the changelog right now and it says that wifi calling is only installed on the g2. I'm assuming that you have a g2 since you are asking about it, but just throwing my 2 cents.
Maybe the rom is thinking that you are running a Z instead of a G2. Idk. It might help. More than likely not, but it's worth saying IMO.

martonikaj said:
Yes, it is well known that a first reboot is required to get WiFi working on CM7 right now. OP's question, however, is about the missing WiFi calling application.
OP, that's very interesting that it won't show up. So if you do a clean full wipe and install of something like RC1 or higher, you still don't get WiFi calling? Mine has been in there on every build... hmm..
Click to expand...
Click to collapse
I know what you are saying . but i tried everything after that i said so that wifi calling is working. as you find the WIFI connection then go the wifi calling app and then enable it and connect to tmobile network so that you can use it. but if you are in such area where Tmobile network's service is bad then might there be a chances to have no connection with wifi calling even if you have connected to wifi network (Internet)

wasie said:
I know what you are saying . but i tried everything after that i said so that wifi calling is working. as you find the WIFI connection then go the wifi calling app and then enable it and connect to tmobile network so that you can use it. but if you are in such area where Tmobile network's service is bad then might there be a chances to have no connection with wifi calling even if you have connected to wifi network (Internet)
Click to expand...
Click to collapse
now i am store working and i have a wifi at my job too. so i connect there carefully once again and checked everything and when i open to the wifi calling app and connect to T-Mobile Network for wifi calling i see after connecting to Tmobile via wifi radio signals turn to zero and when i disconnect it singals first had a 'x' on it and then they turn green. so make sure you are using the tmobile network then you will be able to use wifi option.

MMS not working on wifi calling

Ok so I flashed the deodexed (Whitehawkx version) stock rooted T-Mobile update with wificalling. I was super excited for it to be released blah, blah, blah then I went to send an mms. No go. Just hung. So I figured it must be because I'm on a deodexed rooted rom. I asked friend (thanks doc) who had just updated using the T-Mobile method to tey sending an mms while on wificalling. No dice. I'm wondering how many of us have this problem. It seems to be a T-Mobile issue, but I'm no dev. Just a big fan.
Thanks
DARKSIDE

It seems to work for me but it takes forever to send the images/media - unless the phone finally decided to use edge to sent the message while still connected to wifi calling. Though, I assumed once it's connected to wifi calling, it only uses wifi. Can anyone confirm this?

KaneHusky said:
It seems to work for me but it takes forever to send the images/media - unless the phone finally decided to use edge to sent the message while still connected to wifi calling. Though, I assumed once it's connected to wifi calling, it only uses wifi. Can anyone confirm this?
Click to expand...
Click to collapse
I can't answer that for sure. Hmm maybe I don't give it enough time, for me and doc it doesn't send until right after we disconnect from wifi. Thanks for the feedback.
DARKSIDE

This is a problem with the Wifi calling feature. It disables MMS and does this on multiple phones. I had this same problem on my Mytouch 4g as well.
There is a response from a Tmobile employee on the Tmobile support boards for wifi calling and the G2 which says http://support.t-mobile.com/message/4487.
This is normal. WiFi Calling registers through your wifi and disables the mobile networks to do so. Some T-Mobile apps have the ability to temporarily force a GPRS connection to verify you. The only away to avoid this is to disable or turn off WiFi Calling.
This is also why calls drop when leaving your wifi network's signal range. It needs to disconnect and re-register on the T-Mobile network.
Click to expand...
Click to collapse

i have a gs2 in one hand and a mt4g in the other. wifi calling on on both. the gs2 sends instantly without ever connecting to data, the mt4g connects to data and takes ~10 seconds to send. maybe depends on things like your router or something.

mikeyinid said:
i have a gs2 in one hand and a mt4g in the other. wifi calling on on both. the gs2 sends instantly without ever connecting to data, the mt4g connects to data and takes ~10 seconds to send. maybe depends on things like your router or something.
Click to expand...
Click to collapse
Mms? Crazy. I have a mytouch4g also and did the same thing and the mytouch4g sent and gs2 not at all. Haha. Oh well thanks.
DARKSIDE

raycaster3 said:
Mms? Crazy. I have a mytouch4g also and did the same thing and the mytouch4g sent and gs2 not at all. Haha. Oh well thanks.
DARKSIDE
Click to expand...
Click to collapse
the reasom i suggest it being router is that at work on company wifi, cant send or receive mms w/wifi calling on. at home it sends no problem, and here on the hospital wifi it sends fine also, idk

mikeyinid said:
the reasom i suggest it being router is that at work on company wifi, cant send or receive mms w/wifi calling on. at home it sends no problem, and here on the hospital wifi it sends fine also, idk
Click to expand...
Click to collapse
I'll check at some diffferent places to see what's up. I appreciate the info.
DARKSIDE

raycaster3 said:
I'll check at some diffferent places to see what's up. I appreciate the info.
DARKSIDE
Click to expand...
Click to collapse
Did you update your baseband to the most recent one. That could be a problem.
Sent from my SGH-T989 using xda premium

Killbynature said:
Did you update your baseband to the most recent one. That could be a problem.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
No, but the other person who had the problem did update everything including the baseband and he had the issue.
DARKSIDE

Mine will not mms on wifi either. It doesn't even send once you get back on cell. It just says sending. My vibrant was the same way!! Fck! Annoying!

escrowdog said:
Mine will not mms on wifi either. It doesn't even send once you get back on cell. It just says sending. My vibrant was the same way!! Fck! Annoying!
Click to expand...
Click to collapse
Yeah I'm not too thrilled either since it worked on sensation and mytouch4g and mytouch4g slide. What gives?
DARKSIDE

mikeyinid said:
the reasom i suggest it being router is that at work on company wifi, cant send or receive mms w/wifi calling on. at home it sends no problem, and here on the hospital wifi it sends fine also, idk
Click to expand...
Click to collapse
You need to remember that the firewall settings are different from place to place. As an example I use a Cisco router at home and WiFi calling will connect but I could not hear the person on the other end initially. I had to look at what the router was doing, figure out what the firewall was blocking and unblock it.
It's likely the firewall at your work is letting some, but not all of the necessary traffic through. You could ask the IT guys if they can look and see what their firewall is blocking from your phone and ask them if they'll unblock it... They may or may not want to help and they may use the information to completely block your phone from being able to connect to the tmobile servers on the other side.

LG OPTIMUS G (SPRINT LS970) CRICKET FLASHED 3G INTERNET ISSUE (Erratic 3G)

I flashed the phone over to cricket but the 3g won't stay on, only way to get it to turn on is to switch from CDMA to LTE/CDMA and vice versa and then turning the mobile data off and on. But if you dont use the Data, it turns itself off again. Anybody know how to fix this?
Click to expand...
Click to collapse
I'm having a similar issue with my Lg Optimus G LS 970 (Sprint) Flashed to Cricket. 3G Does not automatically come on and off. What I have to do is turn off and on the wi-fi multiple times in a row. then the 3G pops on. My data is very slow under 50K down and the 3g times out within 3 to 4 minutes. I tried at different locations around my city. I feel like i'm so close like one setting off.
I have tried re flashing the internet settings with multiple programs, tried simple and mobile ip, I almost think its a setting in the phone. What could be causing the phone not to automatically connect to 3g mobile data? Also why when it does connect the speeds are slow and the connection times out so fast?
This phone is awesome but not having reliable data out and about is killing me.
Oh more thing is it possible to configure the LTE radio on the phone now for when cricket brings LTE to the Portland Market?
Any body have any ideas?

Correction Turn on and off "data" multiple times to start the 3G data.

Simply flash with wireless workshop
Sent from my LG-LS970 using xda premium

Could you point me in the direction of how you flashed your optimus g? Ive flashed a lot of phones but never an lg

I have the sprint lg optimus ls970 & it is current still turned on through sprint. We tried to take it to cricket to flash it over but the rep said the es something was locked...we are tired of sprint and would love to flash ot over to cricket. What are we doing wrong??

Hello. I have the exact same problem you have when I flash mylg ls980 to PagePlus. Did you ever fix this problem? I flash 3G to all phones I do for pageplus. But when I flash my lg ls980 I get an error MIP: 67. I used the modified nv items posted by a user in another forum so the HDR USER/PASSWORD stick. And the settings in DFS all flash correctly. I tried installing the LG Provisioning APK but it never opens for me and force closes. So I'm thinking this problem is with the phone itself. In the settings of the phone. Because what will happen the 3G Symbol pops up. Then when I look in the settings- status, I will have 1x then EVDO. Then when the EVDO connects, the 3G data disconnects. So I'm very sure its a setting in the phone that I'm not aware of. Because the flash works fine. All my HDR/HA/AAA passwords are right. The DFS flash goes through smoothly. So, I'm not sure you know.... =( Look forward to your reply.

where is this modified nv item ?

Spelunker10 said:
Hello. I have the exact same problem you have when I flash mylg ls980 to PagePlus. Did you ever fix this problem? I flash 3G to all phones I do for pageplus. But when I flash my lg ls980 I get an error MIP: 67. I used the modified nv items posted by a user in another forum so the HDR USER/PASSWORD stick. And the settings in DFS all flash correctly. I tried installing the LG Provisioning APK but it never opens for me and force closes. So I'm thinking this problem is with the phone itself. In the settings of the phone. Because what will happen the 3G Symbol pops up. Then when I look in the settings- status, I will have 1x then EVDO. Then when the EVDO connects, the 3G data disconnects. So I'm very sure its a setting in the phone that I'm not aware of. Because the flash works fine. All my HDR/HA/AAA passwords are right. The DFS flash goes through smoothly. So, I'm not sure you know.... =( Look forward to your reply.
Click to expand...
Click to collapse
Any update for this issue? I am having the same problem. I guess the AAA/HA keys didn't stick, so network disconnected after switching to 3G.

adadxbus said:
Any update for this issue? I am having the same problem. I guess the AAA/HA keys didn't stick, so network disconnected after switching to 3G.
Click to expand...
Click to collapse
Hi. I figured out this issue for the LS980 but for the LS970 I was only able to get solid stable 1x. Good luck in your search.

Spelunker10 said:
Hi. I figured out this issue for the LS980 but for the LS970 I was only able to get solid stable 1x. Good luck in your search.
Click to expand...
Click to collapse
Yes, I am actually using ls980. IS there any trick for this phone?

adadxbus said:
Yes, I am actually using ls980. IS there any trick for this phone?
Click to expand...
Click to collapse
See my post this forum.
They have tons of info there.
http:// forum.gsmhosting.com/vbb/f770/flashed-lg-ls970-ls980-3g-connection-problem-1748423/