Related
Hopefully you guys can help me out. I'm suddenly having issues with my phone not being detected by my PCs when it is connected via USB.
When i plug my phone into my PC, i receive the error message: "UBS Device not Recognized One of the USB devices attached to this computer has malfunctioned, and windowes does not recognize it." from my Windows XP PC. My Windows 7 PC is unable to recognize the device plugged in.
The strange thing is that even though my phone is not being recognized by the PCs, the phone will still charge.
The phone is not in USB Debugging Mode, and I've gone ahead and flashed 2 separate Kernals on my phone, but i still am having this issue. I have tested this out with 3 USB cables, on 3 separate computers (Work (win xp), Home (win7), and friends(win7)).
2 Days ago the USB worked fine for me as i was able to flash Franco Kernal and JB onto my Gnex, but suddenly it's not being recognized by my computer anymore.
Stumped.....Hoping that this isn't a hardware issue and something that i can fix without having any downtime away from my phone.
Any thoughts?
Try other USB port and other USB cable.
Sounds like you're missing some drivers... Remove the device completely in Device Manager & plug it again. For MTP, Windows 7 should find the drivers online by itself. If you need fastboot access, you'll have to download the seperate drivers for that. I'd recommend the GNex Toolkit in that case since it comes with the drivers included (you'll still need to install them of course )
Gunthy` said:
Sounds like you're missing some drivers... Remove the device completely in Device Manager & plug it again. For MTP, Windows 7 should find the drivers online by itself. If you need fastboot access, you'll have to download the seperate drivers for that. I'd recommend the GNex Toolkit in that case since it comes with the drivers included (you'll still need to install them of course )
Click to expand...
Click to collapse
Thx for the reply,
Yes, I have been using the GNEX tool kit, though not the 7.3 version that was released today. The 7.2 version was being used at home and on my work PC. I usually install the drivers from the toolkit then plug my phone in when done. The drivers have been recognizing my phone but not since 2 days go.
I'm currently trying to find the MTP checkbox in the phone Settings to double check if it's checked, but im having problems locating it.
thepce said:
I'm currently trying to find the MTP checkbox in the phone Settings to double check if it's checked, but im having problems locating it.
Click to expand...
Click to collapse
Go to Settings > Storage > tap top right menu to display USB computer connection option & tap it
Gunthy` said:
Go to Settings > Storage > tap top right menu to display USB computer connection option & tap it
Click to expand...
Click to collapse
Ah yes, that is where it was hiding....But unfortunately the checkbox is checked.
This seems like a hardware issue, but I'm not certain since the phone still recharges when plugged in
thepce said:
Ah yes, that is where it was hiding....But unfortunately the checkbox is checked.
This seems like a hardware issue, but I'm not certain since the phone still recharges when plugged in
Click to expand...
Click to collapse
Could be... Charging doesn't necessary have anything to do with data transfer AFAIK... Do you see something in the Device Manager when you plug it? You might have to right click & do a re-scan to force detection.
Gunthy` said:
Could be... Charging doesn't necessary have anything to do with data transfer AFAIK... Do you see something in the Device Manager when you plug it? You might have to right click & do a re-scan to force detection.
Click to expand...
Click to collapse
Device Managers shows "Samsung Galaxy Nexus ADB Interface". The drivers look to be installed.
Also another odd thing, is that after i charge my phone and unplug it from my PC, it will continue to show that it is charging on the lock screen and in the top right corner of my phone. However if i go into Settings ---> about phone. It shows Battery Status : Not Charging.
thepce said:
Device Managers shows "Samsung Galaxy Nexus ADB Interface". The drivers look to be installed.
Click to expand...
Click to collapse
You get that when the phone is running normally? I think for me that one only shows up when I put it in bootloader mode. In MTP mode it's just a media device like any other AFAIK... I'll check tomorrow when I'm back on my Windows laptop to be sure . Have you tried putting it in PTP mode? If so do you see the device as a camera or is it the same issue?
thepce said:
Also another odd thing, is that after i charge my phone and unplug it from my PC, it will continue to show that it is charging on the lock screen and in the top right corner of my phone. However if i go into Settings ---> about phone. It shows Battery Status : Not Charging.
Click to expand...
Click to collapse
Sounds like a software bug, but I'll admit it is a bit strange considering your main issue...
Hello i have a question too on Usb subject. forgive me for go off topic over here is there anyway to get my music be playing in the car radio tru usb with my first google phone it worked like a charm model Htc google nexus one just plugged it in en voila music came out..but with the gnex won,t work thanks in advanced
thepce said:
Device Managers shows "Samsung Galaxy Nexus ADB Interface". The drivers look to be installed.
Also another odd thing, is that after i charge my phone and unplug it from my PC, it will continue to show that it is charging on the lock screen and in the top right corner of my phone. However if i go into Settings ---> about phone. It shows Battery Status : Not Charging.
Click to expand...
Click to collapse
Google galaxy nexus nfc battery. either the battery or the port is shot. People having issues.
And get your drivers from Samsung and Android sdk. Qbking77 has a YouTube video on how to set it up.
Android is upgrading...
Lizard78 said:
Hello i have a question too on Usb subject. forgive me for go off topic over here is there anyway to get my music be playing in the car radio tru usb with my first google phone it worked like a charm model Htc google nexus one just plugged it in en voila music came out..but with the gnex won,t work thanks in advanced
Click to expand...
Click to collapse
Basically the way the Nexus One talked to other systems through USB is completely different from the way the Galaxy Nexus does. The GN uses a new protocol called MTP. Your car stereo probably can't read the files on your phone because it doesn't have MTP support.
Phantom Charging Issue
So I've gone ahead and Fiddled around with my phone for the past day trying to fix my USB issue, and I've discovered that this issue may not be due to USB issues.
Throughout the day when i was playing around and trying to fix my USB recognizing issue, it miraculously started working again. Now I am able to connect to my PCs and transfer the desired files.
Upon this issue being resolved, i noticed that periodically the screen would turn on, on it's own while being off in the locked state. I observed this issue to see what may be causing this, and it is turning on due to my phone thinking that i plugged my micro USB cable in to charge it. The charging indicator on the batter flips on, and even the USB Debugger / MTP Notification is present in the notification drawer.
Apparently this is a known issue with the Battery or charging port with Gnex's. (See below the 2 youtube clips for more details for problem/fix.)
https://www.youtube.com/watch?v=47PIdXf25X0
https://www.youtube.com/watch?v=KD6yYLnO6ig
I believe my warranty is void since this phone was purchased in a different country and has had the bootload locked/unlocked a million times. Anyone else have this problem that they have been able to fix manually? Or am I going to have to cross my fingers, ship my phone to get it fixed, and hope the post man doesn't f**k up?
Delete
Hey there,
Im a newb here, and this is my first thread, but whatever.
It all started a few months ago.
Several weeks after I rooted my play, and flashed cm7, with doom kernal, my play just suddenly didn't turn on. (Like, turned it off for the night, but refused to turn on in the day again) . However, after I took out the battery and charged it for 10 mins before plugging the battery back in and turning it on again, it worked. This happened intermittently, and through the 12 months I had with this phone, this has happened multiple times, albeit rarely. Every time it happened, it wouldn't turn on, no led when plugged in the charger, no nothing. Its like a dead brick. Plugged it into the computer and it says "QHSUSB_DLOAD". It would work after I charge it without the battery tho. LOL. - weird. (Something like this, link here
However, yesterday, 31/1/2013, my luck basically ran out. The same thing happened again, with "QHSUSB_DLOAD" showing up and all, but my above method didn't work. And so, I'm stuck with a dead brick.
Basically, my xperia play is unresponsive. Plugged it into the computer and it shows "QHSUSB_DLOAD" I think it stands for Qualcomm High Speed USB Download mode. Today, following this link I just randomly plugged in my phone while holding the back button, with flashtool open in the background. Its some miracle, like, my pc suddenly detected it as an unknown device, and flashtool did some kind of thing, not sure, forgot to screen shot but i think it goes along the lines of "installftfkit". After that, my phone booted.
However, because I wanted to plug in my sim card, i rebooted it, and this time it wouldn't turn on. I tried replicating the results, and all i got wasn't "unknown device" but "QHSUSB_DLOAD".
And there you have it, Xperia Play stuck at "QHSUSB_DLOAD" permanently after several times of intermittent incidents of that happening. It may be hardware failure, which explains the intermittent incidents.
But Im still kind of curious. What causes "QHSUSB_DLOAD"? What component fails that would cause the PC to read it as "QHSUSB_DLOAD"?
Its a dead brick, but I am still trying to revive it. I installed qpst and the QHSUSB_DLOAD drivers. QPST configuration reads a phone in download mode(image 1), QPST software download seems to be able to flash a phone and boot image(image 2). But it needs a hex file and stuff. (Not sure bout that)
Is it easy to get a boot image thing for xperia play? Can i flash it using QPST and make my phone work again?
Thanks for your help guys! Really appreciate it!
Mr_Pistachios said:
Hey there,
Im a newb here, and this is my first thread, but whatever.
It all started a few months ago.
Several weeks after I rooted my play, and flashed cm7, with doom kernal, my play just suddenly didn't turn on. (Like, turned it off for the night, but refused to turn on in the day again) . However, after I took out the battery and charged it for 10 mins before plugging the battery back in and turning it on again, it worked. This happened intermittently, and through the 12 months I had with this phone, this has happened multiple times, albeit rarely. Every time it happened, it wouldn't turn on, no led when plugged in the charger, no nothing. Its like a dead brick. Plugged it into the computer and it says "QHSUSB_DLOAD". It would work after I charge it without the battery tho. LOL. - weird. (Something like this, link here
However, yesterday, 31/1/2013, my luck basically ran out. The same thing happened again, with "QHSUSB_DLOAD" showing up and all, but my above method didn't work. And so, I'm stuck with a dead brick.
Basically, my xperia play is unresponsive. Plugged it into the computer and it shows "QHSUSB_DLOAD" I think it stands for Qualcomm High Speed USB Download mode. Today, following this link I just randomly plugged in my phone while holding the back button, with flashtool open in the background. Its some miracle, like, my pc suddenly detected it as an unknown device, and flashtool did some kind of thing, not sure, forgot to screen shot but i think it goes along the lines of "installftfkit". After that, my phone booted.
However, because I wanted to plug in my sim card, i rebooted it, and this time it wouldn't turn on. I tried replicating the results, and all i got wasn't "unknown device" but "QHSUSB_DLOAD".
And there you have it, Xperia Play stuck at "QHSUSB_DLOAD" permanently after several times of intermittent incidents of that happening. It may be hardware failure, which explains the intermittent incidents.
But Im still kind of curious. What causes "QHSUSB_DLOAD"? What component fails that would cause the PC to read it as "QHSUSB_DLOAD"?
Its a dead brick, but I am still trying to revive it. I installed qpst and the QHSUSB_DLOAD drivers. QPST configuration reads a phone in download mode(image 1), QPST software download seems to be able to flash a phone and boot image(image 2). But it needs a hex file and stuff. (Not sure bout that)
Is it easy to get a boot image thing for xperia play? Can i flash it using QPST and make my phone work again?
Thanks for your help guys! Really appreciate it!
Click to expand...
Click to collapse
Correct me if Im wrong...but Im guessing you tried Flashtool and it doesn't work ?
Also , are you familiar with using fastboot?
another Xperia Play Problem
Hi I am a noob also.
I am having a similar problem. Today I was trying to install the wifi module since it wasn't installed on the gin2Jellybean rom, i tried to flash the phone using the Flashtool (turned the cellphone off and pluged it in again while holding the back button) then the window disappeared and nothing happened. So I tried again, but first I took out the battery and put it in again and tried to flash again and now nothing is happening, Doesn't turn on, Flashtool doesn't do anything and when I try plugging it the laptop does the sound of an unrecognized device. The phone doesn't vibrate or anything when I press the power button.
Just realized that I tried flashing my cell phone using the x10 BLRelock.ftf crap.. is there anyway I can fix this?
Please Help.
Thank you.
216Monster said:
Correct me if Im wrong...but Im guessing you tried Flashtool and it doesn't work ?
Also , are you familiar with using fastboot?
Click to expand...
Click to collapse
Flashtool and fastboot doesn't detect my phone. So yea .
Mr_Pistachios said:
Flashtool and fastboot doesn't detect my phone. So yea .
Click to expand...
Click to collapse
Are the fast boot drivers installed ? Is your boot loader unlocked ?
Sent from my ARCHOS 101G9 using xda premium
216Monster said:
Are the fast boot drivers installed ? Is your boot loader unlocked ?
Sent from my ARCHOS 101G9 using xda premium
Click to expand...
Click to collapse
LOL WTS.
As I said, its totally intermittent and random. I tried plugging it into the computer today, and this time a red led was flashing. I let it charge up a little, and there i had it, booted up perfectly normally.
Maybe the plug is becoming dusty or whatever, resulting in the detection being very intermittent? It happens on and off.
When the phone booted up, I noticed the battery level being very low (2%) maybe it needed some charging? Maybe the battery's screwed?
Its really weird.
And yea, fast boot drivers are installed, and boot loaders are unlocked (If not cm10 wouldn't have been installed lol)
Gonna keep you guys posted and see if it goes dead after restarting. Gonna restart after it charges up to 40%.
(I need to restart cos I have to plug in my sim and memory card)
Mr_Pistachios said:
LOL WTS.
As I said, its totally intermittent and random. I tried plugging it into the computer today, and this time a red led was flashing. I let it charge up a little, and there i had it, booted up perfectly normally.
Maybe the plug is becoming dusty or whatever, resulting in the detection being very intermittent? It happens on and off.
When the phone booted up, I noticed the battery level being very low (2%) maybe it needed some charging? Maybe the battery's screwed?
Its really weird.
And yea, fast boot drivers are installed, and boot loaders are unlocked (If not cm10 wouldn't have been installed lol)
Gonna keep you guys posted and see if it goes dead after restarting. Gonna restart after it charges up to 40%.
(I need to restart cos I have to plug in my sim and memory card)
Click to expand...
Click to collapse
Well, I restarted and it worked.
My theory is this: Phone ran out of batt one day. Plug is loose and dusty. Computer couldn't detect it properly, charger couldn't charge my phone properly (contacts are rusty or whatever shyt) and therefore phone couldn't on.
Don't know why my computer detected it as QHSUSB_DLOAD multiple times throught the 1 month tho.
Could a dirty plug cause that?
During that 1 month there was no response on the computer, thought it was bricked lol.
Anyways, I will keep you guys posted if this happens again, thanks for your help guys!
Imma keep this thread open since this is intermittent.
I'll only close it after 2 months.
Mr_Pistachios said:
Well, I restarted and it worked.
My theory is this: Phone ran out of batt one day. Plug is loose and dusty. Computer couldn't detect it properly, charger couldn't charge my phone properly (contacts are rusty or whatever shyt) and therefore phone couldn't on.
Don't know why my computer detected it as QHSUSB_DLOAD multiple times throught the 1 month tho.
Could a dirty plug cause that?
During that 1 month there was no response on the computer, thought it was bricked lol.
Anyways, I will keep you guys posted if this happens again, thanks for your help guys!
Imma keep this thread open since this is intermittent.
I'll only close it after 2 months.
Click to expand...
Click to collapse
zzz. It couldn't boot up again. This time no QHSUSB_DLOAD, no nothing on the computer. 0 detection 0_0
Mr_Pistachios said:
zzz. It couldn't boot up again. This time no QHSUSB_DLOAD, no nothing on the computer. 0 detection 0_0
Click to expand...
Click to collapse
My phone is just driving me batshyt insane -.-
I tried pressing the power button again and it worked, without plugging in the charger nor the computer.
It's intermittent, and now im afraid to turn it off 0_0
Mr_Pistachios said:
My phone is just driving me batshyt insane -.-
I tried pressing the power button again and it worked, without plugging in the charger nor the computer.
It's intermittent, and now im afraid to turn it off 0_0
Click to expand...
Click to collapse
FML. Hands were itchy and wanted to see what would happen if I turned my phone off.
Now it can't turn back on, with the computer only detecting QHSUSB_DLOAD.
Mr_Pistachios said:
FML. Hands were itchy and wanted to see what would happen if I turned my phone off.
Now it can't turn back on, with the computer only detecting QHSUSB_DLOAD.
Click to expand...
Click to collapse
Turned on my phone after 10+ tries.
What I did:
1) Plugged out battery, held power button
2)Without releasing the power button, insert the battery.
Repeat until phone turns on.
Moral of story: Persistence pays off. Nah jk.
Made sure to on my phone with the sim card in this time
Never gonna off my phone ever again (Hope it doesn't run out of batt LOL)
One thing to note is this really weird fluctuation in my phone's battery levels. Maybe my battery is going nuts? Attached is the screenshot.
Made sure to on my phone with the sim card in this time
The epic fluctuation may provide clues as to why my phone's behaving like so.
As you can see from the third dip, I was charging my phone. And then after switching it off, it wouldn't turn on. After a day, and countless times of trying to wake it up, you can see that the battery level has dropped sharply. Weird.
The first dip happened a few days ago(not able to turn on) on 1st Feb. The second dip happened on the 4th, while the third happened on the 5th, today These drops in battery levels happened when my phone couldn't turn on.
Qhsusb_dload
I am sorry to say that my problem is still the same every time I plug my phone it is shown as QHSUSB_DLOAD.
I just need to find a driver for it.
PS my phone never turned on after the brick.
Can someone send me a link to the driver and instructions if hard to install.
Thank you.
extrem3hunt said:
I am sorry to say that my problem is still the same every time I plug my phone it is shown as QHSUSB_DLOAD.
I just need to find a driver for it.
PS my phone never turned on after the brick.
Can someone send me a link to the driver and instructions if hard to install.
Thank you.
Click to expand...
Click to collapse
Does plugging the phone into the computer while holding the back button work?
Mr_Pistachios said:
Does plugging the phone into the computer while holding the back button work?
Click to expand...
Click to collapse
Nope every time I connect it is detected as QHSUSB_DLOAD and it tries to find a driver and fails.
extrem3hunt said:
Nope every time I connect it is detected as QHSUSB_DLOAD and it tries to find a driver and fails.
Click to expand...
Click to collapse
Even if it finds the driver, it wouldn't help you, cos QHSUSB_DLOAD means that the phone can't find the rom, and kernel or whatever. (I think) Its like a computer without an operating system. QHSUSB_DLOAD = Qualcomm Highspeed USB Download Mode, which means its waiting for the manufacturer to flash the rom and shyt, and therefore, your phone is bricked. (Dead brick, i think?)
For me, i think there's something wrong with the connections in my motherboard, resulting in the phone not being able to find the rom and stuff.
Maybe there's no hope for you.........
In short, I think your phone's bricked forever.... Most probably.
any fix bricked play
Hi,
I am in the same boat. I get the QSHUSB Dload error and I cant get the phone into flash mode. Its basically dead, as the others have mentioned. Anyone get a fix for this thanks
Tommy
---------- Post added at 04:15 PM ---------- Previous post was at 04:06 PM ----------
extrem3hunt said:
Nope every time I connect it is detected as QHSUSB_DLOAD and it tries to find a driver and fails.
Click to expand...
Click to collapse
Hi, could you fix it in the end, I have the same problem...looks like I may need a new play after only 1 week lol : (
QSHUSB_Dload Fix
tommyforest123 said:
Hi,
I am in the same boat. I get the QSHUSB Dload error and I cant get the phone into flash mode. Its basically dead, as the others have mentioned. Anyone get a fix for this thanks
Tommy
---------- Post added at 04:15 PM ---------- Previous post was at 04:06 PM ----------
Hi, could you fix it in the end, I have the same problem...looks like I may need a new play after only 1 week lol : (
Click to expand...
Click to collapse
Hi, I have fixed my HARD bricked phone with the help of Alejandrissimo, contact him and tell him about your problem and he fix your phone online.You will need to know some basic knowledge of electronics and you will require a piece of wire. This is where you contact him.
unlock-bootloader(dot)com/contact/
extrem3hunt said:
Hi, I have fixed my HARD bricked phone with the help of Alejandrissimo, contact him and tell him about your problem and he fix your phone online.You will need to know some basic knowledge of electronics and you will require a piece of wire. This is where you contact him.
unlock-bootloader(dot)com/contact/
Click to expand...
Click to collapse
Well, okay, imma give it a try, tnks.
Before flashing your "bricked" device, try this!
Mr_Pistachios said:
Turned on my phone after 10+ tries.
What I did:
1) Plugged out battery, held power button
2)Without releasing the power button, insert the battery.
Repeat until phone turns on.
Moral of story: Persistence pays off. Nah jk.
Click to expand...
Click to collapse
YOU SAVED ME! We have an Xperia Play at work and it wouldn't boot. Plugged it in USB and the HS-USB QDLoader 9008 Device came up. I read your post, did the power+battery thing 8 times, and it magically came back to life!
I wouldn't believe it if someone told me, but for some reason this seams to work. removing the battery and plugging it back in did not work for me, but holding down the power button did the trick.
:good::victory:
proteusgr said:
YOU SAVED ME! We have an Xperia Play at work and it wouldn't boot. Plugged it in USB and the HS-USB QDLoader 9008 Device came up. I read your post, did the power+battery thing 8 times, and it magically came back to life!
I wouldn't believe it if someone told me, but for some reason this seams to work. removing the battery and plugging it back in did not work for me, but holding down the power button did the trick.
:good::victory:
Click to expand...
Click to collapse
HAHAHAHA LOL.
Glad it worked out for you
My guess is that there's something loose inside, and repeatedly trying to do that may help.
I think it's something to do with Sony's build quality, or maybe because the phone sustained hard knocks and stuff. (Probably just wear and tear)
Aledranssimo didn't reply me, so yea. T.T
This issue is probably an intermittent one I guess. I've since moved on and gotten a new phone (Lumia 520)
So, been rooting, fiddling, installing ROMs, etc for a couple years. By no means am I an expert, I can just do research and read. I've had bootloops, and crashes, and all the same issues everyone else on this forum has had over the course of learning this stuff. So, when my phone wouldn't boot up even into recovery, I didn't sweat it at first. But, well, I've tried everything and nothing works. I can't boot, I can't charge it. Nothing works.
So, here's the breakdown.
Lt28i
Was running stock
Phone was rooted
CWM recovery
Bootloader is unlockable via regular means.
Hated it since a recent update. Phone was slow and i wanted JB. So i started the process.
I installed a new kernel, was in the process of installing a new ROM, but the instructions said to delete /system. I did.
From that point on, phone would not boot. Would not charge and would not get into recovery.
I can't connect via adb/fastboot.
It's a brick sitting on my desk. I've since gotten an HTC one, which IS AWESOME guys, but I hate having a perfectly fine piece of hardware just sitting on my desk collecting dust, (not to mention hate admitting defeat) so I'd like to get it working and either give it to a friend or sell it. Can anyone help.
Symptoms. As soon as i plug it in, the red light goes on. After about 15 minutes, the sony logo comes on with the red light off for just under 10 mins or so, then black screen and red light on. So, it's in a kernel boot-loop of sorts, but never gets past it and therefore doesn't charge. I've left it unattanded for over a week to drain the battery, hoping it'll reset, but no change. Immediately the red light goes on when plugged in. No way to boot into recovery. No way to connect to fastboot.
Any ideas?
Have tried the following:
http://forum.xda-developers.com/showthread.php?t=1849170
and a bunch of others. None has worked.
So your bootloader is locked?
You can't flash any custom kernel on locked bl.
First, connect your phone to a wall charger for whole night.
Then use Update Service or PCC to repair it.
Remember: do not connect your phone to PC until it ask you to do so.
Press vol down when connecting to PC.
cities516 said:
So your bootloader is locked?
You can't flash any custom kernel on locked bl.
First, connect your phone to a wall charger for whole night.
Then use Update Service or PCC to repair it.
Remember: do not connect your phone to PC until it ask you to do so.
Press vol down when connecting to PC.
Click to expand...
Click to collapse
sorry, my mistake. The plan was to flash a kernel, but i never got around to it. I had looked into unlocking the bootloader, but wanted to see if I could get any good JB roms first. Sorry about that false info.
I have both let the phone die completely, or so I think, unless it keeps its charge for over a week and charged it for about 40 hours. Like I said, it does the bootloader boot loop which seems to keep it from charging. I never get to the screen where it shows the charging icon, so I can't tell, but I've definitely left it on a charger (not PC) for at least a day and a half. No go.No amount of pressing vol down works.
Does flashtool work on bricked phones?
lewis021 said:
Does flashtool work on bricked phones?
Click to expand...
Click to collapse
Yes, Unless your device is hard bricked meaning it wont show any led or wont do anything basically
AndroidHoneyComb said:
Yes, Unless your device is hard bricked meaning it wont show any led or wont do anything basically
Click to expand...
Click to collapse
Well, that's why I'm hopeful, cause the led does light up immediately on plugin. And the Sony logo screen shows up for a few minutes, then disappears. I have tried flashtool, but it won't connect. No go.
vijn said:
Well, that's why I'm hopeful, cause the led does light up immediately on plugin. And the Sony logo screen shows up for a few minutes, then disappears. I have tried flashtool, but it won't connect. No go.
Click to expand...
Click to collapse
Your either using flash tool wrong (Hold the down button while plugging in the usb to go in flashmode and then flash the ftf quick before flashmode restarts of being idle) The Sony logo is still there so there should be no reason to send it in until all possible repair techniques have been used
AndroidHoneyComb said:
Your either using flash tool wrong (Hold the down button while plugging in the usb to go in flashmode and then flash the ftf quick before flashmode restarts of being idle) The Sony logo is still there so there should be no reason to send it in until all possible repair techniques have been used
Click to expand...
Click to collapse
Well, I've used flashtool a whole bunch of times. Sure from time to time there's an issue with it, but I've tried different versions and none has been successful. And I'm very familiar with the "getting into flashmode" process. And yes, I would agree with you that if the sony logo shows up, then there's gotta be a way, but I'm telling you, it's just not happening. I've tried 100 times.
vijn said:
Well, I've used flashtool a whole bunch of times. Sure from time to time there's an issue with it, but I've tried different versions and none has been successful. And I'm very familiar with the "getting into flashmode" process. And yes, I would agree with you that if the sony logo shows up, then there's gotta be a way, but I'm telling you, it's just not happening. I've tried 100 times.
Click to expand...
Click to collapse
Does Flashtool show anything after you connect your phone to PC with flashmode?
"Drivers have to be installed" or somethimg?
vijn said:
Well, I've used flashtool a whole bunch of times. Sure from time to time there's an issue with it, but I've tried different versions and none has been successful. And I'm very familiar with the "getting into flashmode" process. And yes, I would agree with you that if the sony logo shows up, then there's gotta be a way, but I'm telling you, it's just not happening. I've tried 100 times.
Click to expand...
Click to collapse
If you can see the Sony Logo then it has to work, Hold the down key, while plugging it in and it will show a green led... I had the same problem as you (cause I do things that sony may not like, on my phone)
1. Make sure you have the correct drivers installed.
2. Turn your phone off and unplug USB cord.
3. Hold the VOLUME DOWN button while inserting the USB cord.
4. You should see your small notification light in the top right of the phone turn green.
AndroidHoneyComb said:
If you can see the Sony Logo then it has to work, Hold the down key, while plugging it in and it will show a green led... I had the same problem as you (cause I do things that sony may not like, on my phone)
1. Make sure you have the correct drivers installed.
2. Turn your phone off and unplug USB cord.
3. Hold the VOLUME DOWN button while inserting the USB cord.
4. You should see your small notification light in the top right of the phone turn green.
Click to expand...
Click to collapse
Ya, first of all. I can neither turn the phone on or off. I have no control of it. It "turns on" when it wants and off when it wants. But when i say turns on, it only turn onto the sony logo screen after about 20 mins of being plugged in, when I guess the charge is just enough to allow it to start the boot process. Then the sony logo screen turns on, until that tiny charge dies and the phone turns off and the red LED comes on. Process repeats over and over again. I even put a rubber band on the phone to keep the volume down button pressed so that when the charge does reach the right level for the boot process that the vol down button will trigger recovery, but no deal. If this is the only way to get this thing working, is what you've recommended above, then phone is completely bricked, cause the phone has been like this for 2 weeks and nothing has worked. I know i have the drivers, cause up until this issue, flashtool worked fine. But the PC doesn't even recognize that there's a device plugged in at all now, cause the phone never boots. So, it's like plugging in a usb HDD that is off. I didn't really expect anyone to have a solution, cause i've done extensive research and tried almost everything I've read that seemed relevant, but I still had hope. I suspect the only way to fix it is to open it and connect directly to the mobo in some other way, but i don't have the tools or resources for that. Not even sure I can send it in to be repaired cause it's rooted. Unless someone has a eureka solution, my only option is to send it in to a 3rd party repair guy. Any other thoughts?
The most important thing is: what have you done to your phone before?
Flash something or edit something?
To turn off your phone, long press power + vol up until 3 vibrations.
Then connect your phone to a wallcharger for whole night.
(Do not use PC cable... It won't charge much...)
Then flash stock ftf via Flashtool.
Sent from my LT26i using xda app-developers app
Just read my first 2 posts in the recovery thread sticky'd in the general section.
Then reinstall ALL drivers available in flashtool.
Then use the rubber band trick from my thread. Make sure that the rubber band pushes the button in.
Sit back and wait ,believe me this is the hardest step.
From my Xperia LT28at ION
ToledoJab said:
Then use the rubber band trick from my thread. Make sure that the rubber band pushes the button in.
Sit back and wait ,believe me this is the hardest step.
Click to expand...
Click to collapse
I laughed at the method simplicity, and got amazed on how effective is it.
So when you connect the phone to your PC while holding the volume down key...no green light, and its not recognized by your PC at all, right? Assuming you're using windows; does windows try to install any drivers or anything? Are you prompted in any way that a device has been connected?
and did you try the above mentioned? Hold UP and power button for like 10 seconds...you'll feel it vibrate once...then a few seconds later it should vibrate 3 times...I bricked my phone to some degree Sunday...only I had no response whatsoever...no led while charging, or otherwise...and literally no response from anything...until i tried that vibrate 3 times thing...and it booted right up after...
NO GO!
Well, I've tried it all. @ToledoJab I've read and reread that original post a bunch of times. followed all instructions, in fact, I had read that post many times before even posting in this forum with no luck, but I thought I'd be patient and try again, Used the rubber band technique. Nothing. Seems, when the rubber band is used, the phone doesn't even start the boot process, meaning never shows the sony logo screen.
@jtr what no one seems to understand is, there is absolutely no response to using the power button to turn this on or off. No vibrate, nothing. There are only 2 states. 1. When plugged into wall or PC, LED is red and after 20 mins Sony logo shows up if the vol down button isn't pressed. 2. When not plugged in no led.
Flashtool has been open for 2 days, phone has been plugged in, with rubber band. Drivers installed. Phone is never recognized because it never turns on. it's in perpetual red light on mode.
I don't know guys. I'd say this is an official brick. Not sure there's any way to fix this without opening it up. Still open to any ideas, but please read what I've posted because all the recommendations so far have been things I've already said I've tried, and numerous times. I can't imagine there's anything else to try, but thought I'd update you guys nonetheless.
cool, i understand.
If the volume down key is preventing it from going into that boot loop, though...it seems to be responding to physical input to some degree...
Have you tried any of this without a sim card? I know that sounds trivial, but after a full week of messing with mine a fresh sim-less start knocked out several bugs...and i hadn't read much of that on xda, but the AT&T return directions suggested a without sim boot up as the first thing to do? and at the time, i too, was dealing with some sort of varying degree of brick.
There are also varying ways to drain a permanent phone battery...i wouldn't say thats the best way to go about this, but a friend of mine has a screwed up car charger that does exactly this...which he's kept to bring his samsung nexus out of hard bricks multiple times...i'd say that's definitely a last resort though...the stuff you'd need would only be a couple bucks at radio shack i'd imagine haha.
If you get the Sony screen you should get in to flash mode, and I say should.
With the phone plugged in to PC with flashtool ready to flash, try to do a one vibration reset at Sony screen then immediately press and hold volume down.
Sent from my LT28i using xda app-developers app
I have looked into it many time, but for some reason my case is different in some way. my xperia play, instead of turning on blinks red when i hold the power button or plug it into a charger/USB no matter which outlet or port. people say that i can restore the phone with the PC companion, but my computer wont detect it and by extension neither will the PC companion by any means. I've had this problem before and i fixed it on the same phone, but i don't remember how. i need help to revive my phone a second time
Bedlam5 said:
I have looked into it many time, but for some reason my case is different in some way. my xperia play, instead of turning on blinks red when i hold the power button or plug it into a charger/USB no matter which outlet or port. people say that i can restore the phone with the PC companion, but my computer wont detect it and by extension neither will the PC companion by any means. I've had this problem before and i fixed it on the same phone, but i don't remember how. i need help to revive my phone a second time
Click to expand...
Click to collapse
Hello,
If you can get the phone into flashmode, you can probably use Flashtool to flash the correct firmware to restore your phone. Here are a couple of threads that should help you:
http://forum.xda-developers.com/showthread.php?p=38237999
http://forum.xda-developers.com/showthread.php?t=2054486
Good luck!
Sent from my SCH-I605 using XDA Premium 4 mobile app
If it blinks 3 times red it means the battery is completely dead and you will have to find a way to charge it externally ..... Some people report that if they leave the phone on the charger for a day that that works but its hit and miss.....if its a solid red led I believe that the trim area is damaged and you will need a j-tag to repair it
Thanks for the help guys, I'll try both methods.
i got a same problem a months ago, i just charge my battery with desktop charger then flash it with S1 tool and connect it with jtag box
Hi everyone, i have huge problem with ma Xperia. I bought it and it is not working.
When I wanted to power up it first time, nothing happened. Then i plugged to charger, and nothing.
Then i plugged USB to PC and it,s started. There was Android 2.3 i think, but the touchscreen didn't worked.
After unplug Xpera stuck at sony ericcson logo
Then i plugged usb with search button - uknown device, then with back - same thing unknown device.
The I removed battery, then insert it back and nothing happened with charger, usb, withou any cable - still nothing
Red light is flashing 3 times.
Whats the problem?
And can I run games without touchscreen?
kfasub said:
Hi everyone, i have huge problem with ma Xperia. I bought it and it is not working.
When I wanted to power up it first time, nothing happened. Then i plugged to charger, and nothing.
Then i plugged USB to PC and it,s started. There was Android 2.3 i think, but the touchscreen didn't worked.
After unplug Xpera stuck at sony ericcson logo
Then i plugged usb with search button - uknown device, then with back - same thing unknown device.
The I removed battery, then insert it back and nothing happened with charger, usb, withou any cable - still nothing
Red light is flashing 3 times.
Whats the problem?
And can I run games without touchscreen?
Click to expand...
Click to collapse
maybe the problem is your battery
and yes you can play games without touch but not all games just xperia play optimized games
raminta said:
maybe the problem is your battery
and yes you can play games without touch but not all games just xperia play optimized games
Click to expand...
Click to collapse
Is it possible, because as i said it works for short time without any cable, but stuck on SE logo.
I know i can play without touch, wrong question - my bad.
Can I run game, walking in menu without touch, using pad buttons?
kfasub said:
Is it possible, because as i said it works for short time without any cable, but stuck on SE logo.
I know i can play without touch, wrong question - my bad.
Can I run game, walking in menu without touch, using pad buttons?
Click to expand...
Click to collapse
Try to flash stock firmware with flashtool . Make sure you have drivers installed (from flashtool folder). If you have drivers installed but it still not recognized by flashtool, look in device manager and see what is written under "unknown device".
Phone can be used without touch screen (my Play had broken flex slider cable for more then a month). Navigation in launcher is with dpad, X is confirm, O is back. There is app in play store called "open notification" that I used to see notification, also, app "hard key soft keyboard" to type with dpads.
To be able to answer call, I used xposed framework for GB, with plugin to change home or search key for answering calls
As for games, it is per game. PSXperia games don't need touch screen (and I was playing mostly that while my touch screen was broken)
Bakisha said:
Try to flash stock firmware with flashtool . Make sure you have drivers installed (from flashtool folder). If you have drivers installed but it still not recognized by flashtool, look in device manager and see what is written under "unknown device".
Phone can be used without touch screen (my Play had broken flex slider cable for more then a month). Navigation in launcher is with dpad, X is confirm, O is back. There is app in play store called "open notification" that I used to see notification, also, app "hard key soft keyboard" to type with dpads.
To be able to answer call, I used xposed framework for GB, with plugin to change home or search key for answering calls
As for games, it is per game. PSXperia games don't need touch screen (and I was playing mostly that while my touch screen was broken)
Click to expand...
Click to collapse
Generally, Flashtool doesn't see my phone but there is one weird thing with that i think, i will write that later when, i will back home.
My device is always Unknown Device for Windows. With battery, without it, with back key, search key. Always Unknown device, and red light blinking continously.
And what do you mean "look in device manager and see what is written under "unknown device"."?
kfasub said:
Generally, Flashtool doesn't see my phone but there is one weird thing with that i think, i will write that later when, i will back home.
My device is always Unknown Device for Windows. With battery, without it, with back key, search key. Always Unknown device, and red light blinking continously.
And what do you mean "look in device manager and see what is written under "unknown device"."?
Click to expand...
Click to collapse
On PC, right-click on "my computer" and select "manage". Then on on left side select "device manager". Unknown devices is marked with yellow icon with exclamation mark.
For drivers, look in c:/flashtool/drivers folder (or whatever path you have it installed).
Red led is most likely empty battery, but too much reasons for that without proper troubleshooting (bad charger, bad USB cable, bad battery, bad charging circuit on battery, bad charging circuit in phone, damaged USB port or even short-circuit on motherboard). But it could also means damaged boot loader, and that's why I asked what is written in "unknown device" (it will be something like QHSUSB-something)
hi
Bakisha said:
On PC, right-click on "my computer" and select "manage". Then on on left side select "device manager". Unknown devices is marked with yellow icon with exclamation mark.
For drivers, look in c:/flashtool/drivers folder (or whatever path you have it installed).
Red led is most likely empty battery, but too much reasons for that without proper troubleshooting (bad charger, bad USB cable, bad battery, bad charging circuit on battery, bad charging circuit in phone, damaged USB port or even short-circuit on motherboard). But it could also means damaged boot loader, and that's why I asked what is written in "unknown device" (it will be something like QHSUSB-something)
Click to expand...
Click to collapse
if it is detected in testpoint .... zeus device or qhusb in device manager .... contact me on gtalk [email protected]
There is some progress i think, and maybe degress(?) . I left phone with charger for all night. At the morning for my surprise there is green light. I tried power on, and its work. Almost. Touchscreen is didn't working. But thats nothing. When I unplugged from charger it switch off. Now I can power on it with charger or USB Cable, but without it it's stack on SE logo.
I was think thats battery issue, but it isn't. I pluuged phone directly to USB 5V(Red- "+", Black - "-") without battery of course. Same thing, stack on SE logo.
What can I do next? Can I do anything with that?
EDIT I tried flash stock rom via Flashtool, and nothing. Flashmode and fastboot are working.