So, been rooting, fiddling, installing ROMs, etc for a couple years. By no means am I an expert, I can just do research and read. I've had bootloops, and crashes, and all the same issues everyone else on this forum has had over the course of learning this stuff. So, when my phone wouldn't boot up even into recovery, I didn't sweat it at first. But, well, I've tried everything and nothing works. I can't boot, I can't charge it. Nothing works.
So, here's the breakdown.
Lt28i
Was running stock
Phone was rooted
CWM recovery
Bootloader is unlockable via regular means.
Hated it since a recent update. Phone was slow and i wanted JB. So i started the process.
I installed a new kernel, was in the process of installing a new ROM, but the instructions said to delete /system. I did.
From that point on, phone would not boot. Would not charge and would not get into recovery.
I can't connect via adb/fastboot.
It's a brick sitting on my desk. I've since gotten an HTC one, which IS AWESOME guys, but I hate having a perfectly fine piece of hardware just sitting on my desk collecting dust, (not to mention hate admitting defeat) so I'd like to get it working and either give it to a friend or sell it. Can anyone help.
Symptoms. As soon as i plug it in, the red light goes on. After about 15 minutes, the sony logo comes on with the red light off for just under 10 mins or so, then black screen and red light on. So, it's in a kernel boot-loop of sorts, but never gets past it and therefore doesn't charge. I've left it unattanded for over a week to drain the battery, hoping it'll reset, but no change. Immediately the red light goes on when plugged in. No way to boot into recovery. No way to connect to fastboot.
Any ideas?
Have tried the following:
http://forum.xda-developers.com/showthread.php?t=1849170
and a bunch of others. None has worked.
So your bootloader is locked?
You can't flash any custom kernel on locked bl.
First, connect your phone to a wall charger for whole night.
Then use Update Service or PCC to repair it.
Remember: do not connect your phone to PC until it ask you to do so.
Press vol down when connecting to PC.
cities516 said:
So your bootloader is locked?
You can't flash any custom kernel on locked bl.
First, connect your phone to a wall charger for whole night.
Then use Update Service or PCC to repair it.
Remember: do not connect your phone to PC until it ask you to do so.
Press vol down when connecting to PC.
Click to expand...
Click to collapse
sorry, my mistake. The plan was to flash a kernel, but i never got around to it. I had looked into unlocking the bootloader, but wanted to see if I could get any good JB roms first. Sorry about that false info.
I have both let the phone die completely, or so I think, unless it keeps its charge for over a week and charged it for about 40 hours. Like I said, it does the bootloader boot loop which seems to keep it from charging. I never get to the screen where it shows the charging icon, so I can't tell, but I've definitely left it on a charger (not PC) for at least a day and a half. No go.No amount of pressing vol down works.
Does flashtool work on bricked phones?
lewis021 said:
Does flashtool work on bricked phones?
Click to expand...
Click to collapse
Yes, Unless your device is hard bricked meaning it wont show any led or wont do anything basically
AndroidHoneyComb said:
Yes, Unless your device is hard bricked meaning it wont show any led or wont do anything basically
Click to expand...
Click to collapse
Well, that's why I'm hopeful, cause the led does light up immediately on plugin. And the Sony logo screen shows up for a few minutes, then disappears. I have tried flashtool, but it won't connect. No go.
vijn said:
Well, that's why I'm hopeful, cause the led does light up immediately on plugin. And the Sony logo screen shows up for a few minutes, then disappears. I have tried flashtool, but it won't connect. No go.
Click to expand...
Click to collapse
Your either using flash tool wrong (Hold the down button while plugging in the usb to go in flashmode and then flash the ftf quick before flashmode restarts of being idle) The Sony logo is still there so there should be no reason to send it in until all possible repair techniques have been used
AndroidHoneyComb said:
Your either using flash tool wrong (Hold the down button while plugging in the usb to go in flashmode and then flash the ftf quick before flashmode restarts of being idle) The Sony logo is still there so there should be no reason to send it in until all possible repair techniques have been used
Click to expand...
Click to collapse
Well, I've used flashtool a whole bunch of times. Sure from time to time there's an issue with it, but I've tried different versions and none has been successful. And I'm very familiar with the "getting into flashmode" process. And yes, I would agree with you that if the sony logo shows up, then there's gotta be a way, but I'm telling you, it's just not happening. I've tried 100 times.
vijn said:
Well, I've used flashtool a whole bunch of times. Sure from time to time there's an issue with it, but I've tried different versions and none has been successful. And I'm very familiar with the "getting into flashmode" process. And yes, I would agree with you that if the sony logo shows up, then there's gotta be a way, but I'm telling you, it's just not happening. I've tried 100 times.
Click to expand...
Click to collapse
Does Flashtool show anything after you connect your phone to PC with flashmode?
"Drivers have to be installed" or somethimg?
vijn said:
Well, I've used flashtool a whole bunch of times. Sure from time to time there's an issue with it, but I've tried different versions and none has been successful. And I'm very familiar with the "getting into flashmode" process. And yes, I would agree with you that if the sony logo shows up, then there's gotta be a way, but I'm telling you, it's just not happening. I've tried 100 times.
Click to expand...
Click to collapse
If you can see the Sony Logo then it has to work, Hold the down key, while plugging it in and it will show a green led... I had the same problem as you (cause I do things that sony may not like, on my phone)
1. Make sure you have the correct drivers installed.
2. Turn your phone off and unplug USB cord.
3. Hold the VOLUME DOWN button while inserting the USB cord.
4. You should see your small notification light in the top right of the phone turn green.
AndroidHoneyComb said:
If you can see the Sony Logo then it has to work, Hold the down key, while plugging it in and it will show a green led... I had the same problem as you (cause I do things that sony may not like, on my phone)
1. Make sure you have the correct drivers installed.
2. Turn your phone off and unplug USB cord.
3. Hold the VOLUME DOWN button while inserting the USB cord.
4. You should see your small notification light in the top right of the phone turn green.
Click to expand...
Click to collapse
Ya, first of all. I can neither turn the phone on or off. I have no control of it. It "turns on" when it wants and off when it wants. But when i say turns on, it only turn onto the sony logo screen after about 20 mins of being plugged in, when I guess the charge is just enough to allow it to start the boot process. Then the sony logo screen turns on, until that tiny charge dies and the phone turns off and the red LED comes on. Process repeats over and over again. I even put a rubber band on the phone to keep the volume down button pressed so that when the charge does reach the right level for the boot process that the vol down button will trigger recovery, but no deal. If this is the only way to get this thing working, is what you've recommended above, then phone is completely bricked, cause the phone has been like this for 2 weeks and nothing has worked. I know i have the drivers, cause up until this issue, flashtool worked fine. But the PC doesn't even recognize that there's a device plugged in at all now, cause the phone never boots. So, it's like plugging in a usb HDD that is off. I didn't really expect anyone to have a solution, cause i've done extensive research and tried almost everything I've read that seemed relevant, but I still had hope. I suspect the only way to fix it is to open it and connect directly to the mobo in some other way, but i don't have the tools or resources for that. Not even sure I can send it in to be repaired cause it's rooted. Unless someone has a eureka solution, my only option is to send it in to a 3rd party repair guy. Any other thoughts?
The most important thing is: what have you done to your phone before?
Flash something or edit something?
To turn off your phone, long press power + vol up until 3 vibrations.
Then connect your phone to a wallcharger for whole night.
(Do not use PC cable... It won't charge much...)
Then flash stock ftf via Flashtool.
Sent from my LT26i using xda app-developers app
Just read my first 2 posts in the recovery thread sticky'd in the general section.
Then reinstall ALL drivers available in flashtool.
Then use the rubber band trick from my thread. Make sure that the rubber band pushes the button in.
Sit back and wait ,believe me this is the hardest step.
From my Xperia LT28at ION
ToledoJab said:
Then use the rubber band trick from my thread. Make sure that the rubber band pushes the button in.
Sit back and wait ,believe me this is the hardest step.
Click to expand...
Click to collapse
I laughed at the method simplicity, and got amazed on how effective is it.
So when you connect the phone to your PC while holding the volume down key...no green light, and its not recognized by your PC at all, right? Assuming you're using windows; does windows try to install any drivers or anything? Are you prompted in any way that a device has been connected?
and did you try the above mentioned? Hold UP and power button for like 10 seconds...you'll feel it vibrate once...then a few seconds later it should vibrate 3 times...I bricked my phone to some degree Sunday...only I had no response whatsoever...no led while charging, or otherwise...and literally no response from anything...until i tried that vibrate 3 times thing...and it booted right up after...
NO GO!
Well, I've tried it all. @ToledoJab I've read and reread that original post a bunch of times. followed all instructions, in fact, I had read that post many times before even posting in this forum with no luck, but I thought I'd be patient and try again, Used the rubber band technique. Nothing. Seems, when the rubber band is used, the phone doesn't even start the boot process, meaning never shows the sony logo screen.
@jtr what no one seems to understand is, there is absolutely no response to using the power button to turn this on or off. No vibrate, nothing. There are only 2 states. 1. When plugged into wall or PC, LED is red and after 20 mins Sony logo shows up if the vol down button isn't pressed. 2. When not plugged in no led.
Flashtool has been open for 2 days, phone has been plugged in, with rubber band. Drivers installed. Phone is never recognized because it never turns on. it's in perpetual red light on mode.
I don't know guys. I'd say this is an official brick. Not sure there's any way to fix this without opening it up. Still open to any ideas, but please read what I've posted because all the recommendations so far have been things I've already said I've tried, and numerous times. I can't imagine there's anything else to try, but thought I'd update you guys nonetheless.
cool, i understand.
If the volume down key is preventing it from going into that boot loop, though...it seems to be responding to physical input to some degree...
Have you tried any of this without a sim card? I know that sounds trivial, but after a full week of messing with mine a fresh sim-less start knocked out several bugs...and i hadn't read much of that on xda, but the AT&T return directions suggested a without sim boot up as the first thing to do? and at the time, i too, was dealing with some sort of varying degree of brick.
There are also varying ways to drain a permanent phone battery...i wouldn't say thats the best way to go about this, but a friend of mine has a screwed up car charger that does exactly this...which he's kept to bring his samsung nexus out of hard bricks multiple times...i'd say that's definitely a last resort though...the stuff you'd need would only be a couple bucks at radio shack i'd imagine haha.
If you get the Sony screen you should get in to flash mode, and I say should.
With the phone plugged in to PC with flashtool ready to flash, try to do a one vibration reset at Sony screen then immediately press and hold volume down.
Sent from my LT28i using xda app-developers app
Related
i have a a100 with the latest flexreaper rom installed and im stuck with a pretty serious issue:
a couple of days ago the tab was acting real slow and sluggish and getting bad battery life didnt think nothing of it so i just rebooted a couple times and left it alone . all was good untill the battery hit 10% and i plugged it up using the factory ac adapter. the next day (maybe 6-7 hours later) i went to turn it on and nothing no vibrate no screen flash nothing; other than the power button turning blue as i pressed it and it would stay on for a couple hours but still no other response from the tablet.
im at my wits end on what could be wrong and now i got my wife with her foot on my neck till i get it fixed. can anyone help me?
ive tried to do a hard reset with the reset button tried to boot into recovery /bootloader no dice
(also my home button flashed a couple time i pressed the power button) dont know if its relevant but wanna get as much info out as possible
wondering if anyone can help me...
frenize said:
wondering if anyone can help me...
Click to expand...
Click to collapse
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
pio_masaki said:
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
frenize said:
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
Click to expand...
Click to collapse
Yeah I know that sound it means USB connected but error for some reason. Its been shown if this thing dies all the way down it wont read the battery correctly and probably needs to be sent in. Before that I personally would unplug it open it up and remove the battery for awhile, maybe an hour then put it back and plug it in. But thats me, not the advice I'm giving. If you have warantee on it use that.
The batteries on a lot of devices and laptops etc have something of a fail safe, if the voltage drops below a certain point it trips to prevent cell damage, however it renders the battery useless.
I haven't searched out much past that if a reset is possible by us, but it seems the pack is trash after or needs sent in.
Since this is a sealed unit you void warranty opening it (well unlocking the boot loader did too) so you can't send it in for repairs without paying for it.
I hope someone can jump in and help figure this out, and prove me wrong.
Tapatalked from my Galaxy S II.
Weird, This exact same thing happened to me. Used it in the morning and now after work it won't turn on. I had already tried disconnecting the battery, but hadn't thought to leave it disconnected for an hour. My tablet has been running the leaked ICS since it came out and The last factory reset it had was about a month ago. It was working fine up until this. The power button seems to be responding correctly, the issue is that after the LEDs light up, there is no vibration or display. I hope someone can help us with this issue.
EDIT:
It won't connect in ADB mode. It will only appear on my computer as an APX device and since there is no vibration I am unable to boot into fastboot. Any help or suggestions? All the threads I have found have involved booting into fastboot.
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
same thing here.
max69power said:
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
Click to expand...
Click to collapse
I have been using ICS the leaked one, and last night I was goint to check my email and it did not turn on, I though the battery died. I plugged to the charger and this morning I tried to turning it on but it failed. I did the reset pin but nothing. I connected to the computer and it was recognized as a APX device and installed a driver ACER Picasso USB recover but i cant access anything. I am a nob. Thanks
A100 blackscreen
i am also having this problem. last night. just a black screen it turns on or the home button dose but nothing comes up on the screen. :crying: Help!!!!!!
Has anyone tried holding the power button for a while? Laptops do this too, if someone felt ventures, try taking the battery out and hold the power button. No promises, might work.
sent from my ICONia
same here
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
If the screen is blank while powered on its in failsafe mode, in other words is bricked, has to go to Acer.
Tapatalked from my Galaxy S II.
This just happened to me a few weeks ago as well. If you are still under warranty send it in to Acer, thats what I did. I just got an email saying they had fixed it and were sending it back for free!!
At the time I was on the 9/02 JB build. I wonder if this issue is caused by faulty hardware or if it is an issue that was made by rooting and unlocking it? I don't know enough about this stuff to answer that though, but it does make me think whether I should root/unlock it when I get it back or leave it stock.
Also thanks Pio_masaki for helping me a few weeks back wasn't sure if I was even going to send it in until you said they most likely won't be able to tell.
I highly doubt they even CARE when sending these in. They will void for physical damage most likely.
tshm55 said:
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
Click to expand...
Click to collapse
Ohmygod,
Same here, but it's 3 years ago. Sorry for digging the topic. Still no hope? I still keep the tablet and have just buy another refurbished mainboard to replace but still no vibrate and blacksreen still there.
Hey there,
Im a newb here, and this is my first thread, but whatever.
It all started a few months ago.
Several weeks after I rooted my play, and flashed cm7, with doom kernal, my play just suddenly didn't turn on. (Like, turned it off for the night, but refused to turn on in the day again) . However, after I took out the battery and charged it for 10 mins before plugging the battery back in and turning it on again, it worked. This happened intermittently, and through the 12 months I had with this phone, this has happened multiple times, albeit rarely. Every time it happened, it wouldn't turn on, no led when plugged in the charger, no nothing. Its like a dead brick. Plugged it into the computer and it says "QHSUSB_DLOAD". It would work after I charge it without the battery tho. LOL. - weird. (Something like this, link here
However, yesterday, 31/1/2013, my luck basically ran out. The same thing happened again, with "QHSUSB_DLOAD" showing up and all, but my above method didn't work. And so, I'm stuck with a dead brick.
Basically, my xperia play is unresponsive. Plugged it into the computer and it shows "QHSUSB_DLOAD" I think it stands for Qualcomm High Speed USB Download mode. Today, following this link I just randomly plugged in my phone while holding the back button, with flashtool open in the background. Its some miracle, like, my pc suddenly detected it as an unknown device, and flashtool did some kind of thing, not sure, forgot to screen shot but i think it goes along the lines of "installftfkit". After that, my phone booted.
However, because I wanted to plug in my sim card, i rebooted it, and this time it wouldn't turn on. I tried replicating the results, and all i got wasn't "unknown device" but "QHSUSB_DLOAD".
And there you have it, Xperia Play stuck at "QHSUSB_DLOAD" permanently after several times of intermittent incidents of that happening. It may be hardware failure, which explains the intermittent incidents.
But Im still kind of curious. What causes "QHSUSB_DLOAD"? What component fails that would cause the PC to read it as "QHSUSB_DLOAD"?
Its a dead brick, but I am still trying to revive it. I installed qpst and the QHSUSB_DLOAD drivers. QPST configuration reads a phone in download mode(image 1), QPST software download seems to be able to flash a phone and boot image(image 2). But it needs a hex file and stuff. (Not sure bout that)
Is it easy to get a boot image thing for xperia play? Can i flash it using QPST and make my phone work again?
Thanks for your help guys! Really appreciate it!
Mr_Pistachios said:
Hey there,
Im a newb here, and this is my first thread, but whatever.
It all started a few months ago.
Several weeks after I rooted my play, and flashed cm7, with doom kernal, my play just suddenly didn't turn on. (Like, turned it off for the night, but refused to turn on in the day again) . However, after I took out the battery and charged it for 10 mins before plugging the battery back in and turning it on again, it worked. This happened intermittently, and through the 12 months I had with this phone, this has happened multiple times, albeit rarely. Every time it happened, it wouldn't turn on, no led when plugged in the charger, no nothing. Its like a dead brick. Plugged it into the computer and it says "QHSUSB_DLOAD". It would work after I charge it without the battery tho. LOL. - weird. (Something like this, link here
However, yesterday, 31/1/2013, my luck basically ran out. The same thing happened again, with "QHSUSB_DLOAD" showing up and all, but my above method didn't work. And so, I'm stuck with a dead brick.
Basically, my xperia play is unresponsive. Plugged it into the computer and it shows "QHSUSB_DLOAD" I think it stands for Qualcomm High Speed USB Download mode. Today, following this link I just randomly plugged in my phone while holding the back button, with flashtool open in the background. Its some miracle, like, my pc suddenly detected it as an unknown device, and flashtool did some kind of thing, not sure, forgot to screen shot but i think it goes along the lines of "installftfkit". After that, my phone booted.
However, because I wanted to plug in my sim card, i rebooted it, and this time it wouldn't turn on. I tried replicating the results, and all i got wasn't "unknown device" but "QHSUSB_DLOAD".
And there you have it, Xperia Play stuck at "QHSUSB_DLOAD" permanently after several times of intermittent incidents of that happening. It may be hardware failure, which explains the intermittent incidents.
But Im still kind of curious. What causes "QHSUSB_DLOAD"? What component fails that would cause the PC to read it as "QHSUSB_DLOAD"?
Its a dead brick, but I am still trying to revive it. I installed qpst and the QHSUSB_DLOAD drivers. QPST configuration reads a phone in download mode(image 1), QPST software download seems to be able to flash a phone and boot image(image 2). But it needs a hex file and stuff. (Not sure bout that)
Is it easy to get a boot image thing for xperia play? Can i flash it using QPST and make my phone work again?
Thanks for your help guys! Really appreciate it!
Click to expand...
Click to collapse
Correct me if Im wrong...but Im guessing you tried Flashtool and it doesn't work ?
Also , are you familiar with using fastboot?
another Xperia Play Problem
Hi I am a noob also.
I am having a similar problem. Today I was trying to install the wifi module since it wasn't installed on the gin2Jellybean rom, i tried to flash the phone using the Flashtool (turned the cellphone off and pluged it in again while holding the back button) then the window disappeared and nothing happened. So I tried again, but first I took out the battery and put it in again and tried to flash again and now nothing is happening, Doesn't turn on, Flashtool doesn't do anything and when I try plugging it the laptop does the sound of an unrecognized device. The phone doesn't vibrate or anything when I press the power button.
Just realized that I tried flashing my cell phone using the x10 BLRelock.ftf crap.. is there anyway I can fix this?
Please Help.
Thank you.
216Monster said:
Correct me if Im wrong...but Im guessing you tried Flashtool and it doesn't work ?
Also , are you familiar with using fastboot?
Click to expand...
Click to collapse
Flashtool and fastboot doesn't detect my phone. So yea .
Mr_Pistachios said:
Flashtool and fastboot doesn't detect my phone. So yea .
Click to expand...
Click to collapse
Are the fast boot drivers installed ? Is your boot loader unlocked ?
Sent from my ARCHOS 101G9 using xda premium
216Monster said:
Are the fast boot drivers installed ? Is your boot loader unlocked ?
Sent from my ARCHOS 101G9 using xda premium
Click to expand...
Click to collapse
LOL WTS.
As I said, its totally intermittent and random. I tried plugging it into the computer today, and this time a red led was flashing. I let it charge up a little, and there i had it, booted up perfectly normally.
Maybe the plug is becoming dusty or whatever, resulting in the detection being very intermittent? It happens on and off.
When the phone booted up, I noticed the battery level being very low (2%) maybe it needed some charging? Maybe the battery's screwed?
Its really weird.
And yea, fast boot drivers are installed, and boot loaders are unlocked (If not cm10 wouldn't have been installed lol)
Gonna keep you guys posted and see if it goes dead after restarting. Gonna restart after it charges up to 40%.
(I need to restart cos I have to plug in my sim and memory card)
Mr_Pistachios said:
LOL WTS.
As I said, its totally intermittent and random. I tried plugging it into the computer today, and this time a red led was flashing. I let it charge up a little, and there i had it, booted up perfectly normally.
Maybe the plug is becoming dusty or whatever, resulting in the detection being very intermittent? It happens on and off.
When the phone booted up, I noticed the battery level being very low (2%) maybe it needed some charging? Maybe the battery's screwed?
Its really weird.
And yea, fast boot drivers are installed, and boot loaders are unlocked (If not cm10 wouldn't have been installed lol)
Gonna keep you guys posted and see if it goes dead after restarting. Gonna restart after it charges up to 40%.
(I need to restart cos I have to plug in my sim and memory card)
Click to expand...
Click to collapse
Well, I restarted and it worked.
My theory is this: Phone ran out of batt one day. Plug is loose and dusty. Computer couldn't detect it properly, charger couldn't charge my phone properly (contacts are rusty or whatever shyt) and therefore phone couldn't on.
Don't know why my computer detected it as QHSUSB_DLOAD multiple times throught the 1 month tho.
Could a dirty plug cause that?
During that 1 month there was no response on the computer, thought it was bricked lol.
Anyways, I will keep you guys posted if this happens again, thanks for your help guys!
Imma keep this thread open since this is intermittent.
I'll only close it after 2 months.
Mr_Pistachios said:
Well, I restarted and it worked.
My theory is this: Phone ran out of batt one day. Plug is loose and dusty. Computer couldn't detect it properly, charger couldn't charge my phone properly (contacts are rusty or whatever shyt) and therefore phone couldn't on.
Don't know why my computer detected it as QHSUSB_DLOAD multiple times throught the 1 month tho.
Could a dirty plug cause that?
During that 1 month there was no response on the computer, thought it was bricked lol.
Anyways, I will keep you guys posted if this happens again, thanks for your help guys!
Imma keep this thread open since this is intermittent.
I'll only close it after 2 months.
Click to expand...
Click to collapse
zzz. It couldn't boot up again. This time no QHSUSB_DLOAD, no nothing on the computer. 0 detection 0_0
Mr_Pistachios said:
zzz. It couldn't boot up again. This time no QHSUSB_DLOAD, no nothing on the computer. 0 detection 0_0
Click to expand...
Click to collapse
My phone is just driving me batshyt insane -.-
I tried pressing the power button again and it worked, without plugging in the charger nor the computer.
It's intermittent, and now im afraid to turn it off 0_0
Mr_Pistachios said:
My phone is just driving me batshyt insane -.-
I tried pressing the power button again and it worked, without plugging in the charger nor the computer.
It's intermittent, and now im afraid to turn it off 0_0
Click to expand...
Click to collapse
FML. Hands were itchy and wanted to see what would happen if I turned my phone off.
Now it can't turn back on, with the computer only detecting QHSUSB_DLOAD.
Mr_Pistachios said:
FML. Hands were itchy and wanted to see what would happen if I turned my phone off.
Now it can't turn back on, with the computer only detecting QHSUSB_DLOAD.
Click to expand...
Click to collapse
Turned on my phone after 10+ tries.
What I did:
1) Plugged out battery, held power button
2)Without releasing the power button, insert the battery.
Repeat until phone turns on.
Moral of story: Persistence pays off. Nah jk.
Made sure to on my phone with the sim card in this time
Never gonna off my phone ever again (Hope it doesn't run out of batt LOL)
One thing to note is this really weird fluctuation in my phone's battery levels. Maybe my battery is going nuts? Attached is the screenshot.
Made sure to on my phone with the sim card in this time
The epic fluctuation may provide clues as to why my phone's behaving like so.
As you can see from the third dip, I was charging my phone. And then after switching it off, it wouldn't turn on. After a day, and countless times of trying to wake it up, you can see that the battery level has dropped sharply. Weird.
The first dip happened a few days ago(not able to turn on) on 1st Feb. The second dip happened on the 4th, while the third happened on the 5th, today These drops in battery levels happened when my phone couldn't turn on.
Qhsusb_dload
I am sorry to say that my problem is still the same every time I plug my phone it is shown as QHSUSB_DLOAD.
I just need to find a driver for it.
PS my phone never turned on after the brick.
Can someone send me a link to the driver and instructions if hard to install.
Thank you.
extrem3hunt said:
I am sorry to say that my problem is still the same every time I plug my phone it is shown as QHSUSB_DLOAD.
I just need to find a driver for it.
PS my phone never turned on after the brick.
Can someone send me a link to the driver and instructions if hard to install.
Thank you.
Click to expand...
Click to collapse
Does plugging the phone into the computer while holding the back button work?
Mr_Pistachios said:
Does plugging the phone into the computer while holding the back button work?
Click to expand...
Click to collapse
Nope every time I connect it is detected as QHSUSB_DLOAD and it tries to find a driver and fails.
extrem3hunt said:
Nope every time I connect it is detected as QHSUSB_DLOAD and it tries to find a driver and fails.
Click to expand...
Click to collapse
Even if it finds the driver, it wouldn't help you, cos QHSUSB_DLOAD means that the phone can't find the rom, and kernel or whatever. (I think) Its like a computer without an operating system. QHSUSB_DLOAD = Qualcomm Highspeed USB Download Mode, which means its waiting for the manufacturer to flash the rom and shyt, and therefore, your phone is bricked. (Dead brick, i think?)
For me, i think there's something wrong with the connections in my motherboard, resulting in the phone not being able to find the rom and stuff.
Maybe there's no hope for you.........
In short, I think your phone's bricked forever.... Most probably.
any fix bricked play
Hi,
I am in the same boat. I get the QSHUSB Dload error and I cant get the phone into flash mode. Its basically dead, as the others have mentioned. Anyone get a fix for this thanks
Tommy
---------- Post added at 04:15 PM ---------- Previous post was at 04:06 PM ----------
extrem3hunt said:
Nope every time I connect it is detected as QHSUSB_DLOAD and it tries to find a driver and fails.
Click to expand...
Click to collapse
Hi, could you fix it in the end, I have the same problem...looks like I may need a new play after only 1 week lol : (
QSHUSB_Dload Fix
tommyforest123 said:
Hi,
I am in the same boat. I get the QSHUSB Dload error and I cant get the phone into flash mode. Its basically dead, as the others have mentioned. Anyone get a fix for this thanks
Tommy
---------- Post added at 04:15 PM ---------- Previous post was at 04:06 PM ----------
Hi, could you fix it in the end, I have the same problem...looks like I may need a new play after only 1 week lol : (
Click to expand...
Click to collapse
Hi, I have fixed my HARD bricked phone with the help of Alejandrissimo, contact him and tell him about your problem and he fix your phone online.You will need to know some basic knowledge of electronics and you will require a piece of wire. This is where you contact him.
unlock-bootloader(dot)com/contact/
extrem3hunt said:
Hi, I have fixed my HARD bricked phone with the help of Alejandrissimo, contact him and tell him about your problem and he fix your phone online.You will need to know some basic knowledge of electronics and you will require a piece of wire. This is where you contact him.
unlock-bootloader(dot)com/contact/
Click to expand...
Click to collapse
Well, okay, imma give it a try, tnks.
Before flashing your "bricked" device, try this!
Mr_Pistachios said:
Turned on my phone after 10+ tries.
What I did:
1) Plugged out battery, held power button
2)Without releasing the power button, insert the battery.
Repeat until phone turns on.
Moral of story: Persistence pays off. Nah jk.
Click to expand...
Click to collapse
YOU SAVED ME! We have an Xperia Play at work and it wouldn't boot. Plugged it in USB and the HS-USB QDLoader 9008 Device came up. I read your post, did the power+battery thing 8 times, and it magically came back to life!
I wouldn't believe it if someone told me, but for some reason this seams to work. removing the battery and plugging it back in did not work for me, but holding down the power button did the trick.
:good::victory:
proteusgr said:
YOU SAVED ME! We have an Xperia Play at work and it wouldn't boot. Plugged it in USB and the HS-USB QDLoader 9008 Device came up. I read your post, did the power+battery thing 8 times, and it magically came back to life!
I wouldn't believe it if someone told me, but for some reason this seams to work. removing the battery and plugging it back in did not work for me, but holding down the power button did the trick.
:good::victory:
Click to expand...
Click to collapse
HAHAHAHA LOL.
Glad it worked out for you
My guess is that there's something loose inside, and repeatedly trying to do that may help.
I think it's something to do with Sony's build quality, or maybe because the phone sustained hard knocks and stuff. (Probably just wear and tear)
Aledranssimo didn't reply me, so yea. T.T
This issue is probably an intermittent one I guess. I've since moved on and gotten a new phone (Lumia 520)
I have a bricked Xperia Ion that would boot loop on sony logo without being recognized by my computer and as far as I tried, I cant get it to flashmode. It's a Kernel issue because when my phone exits low charging mode, it just bootloops again until the battery drains itself.
It's a lt28at, so my bootloader is locked. Here where I live (venezuela) is difficult to find the apropiate tools to take apart my phone and unplug the battery from the mainboard, but i had already tried hard reseting my phone twice, leaving it to charge and then as soon the red led dissapears, I prepare flashtool with my firmware and connect it keeping the down volume key pressed with no luck.
I*ll keep trying, everybody says my phone is impossible to brick due to the locked bootloader but I have a question that needs to be answered:
Hard reseting the phone does the same effect than taking my batery apart and leave the phone 10-15 to reset itself?
Thanks in advance for your answers.
No the hard reset is not the same. For some reason the device will freak out causing this issue. Taking the device apart and unplug the battery is the best way to get your phone running again. It takes allot less time and is not hard to do with a bit of mechanical knowledge. If you want to try the other way then listen careful. When you do the reset with power and volume there is actually three phases. We know about the one buzz and three buzz. If you have payed attention while doing it you may have noticed that just before the first buzz the screen will bleed out and shut off. If you do that after it starts to loop from charging it should then allow you to plug it in to the computer in flash mode.
Keep in mind if it does buzz you will most likely have to start over. So as soon as you see it let go of the buttons. Hope it helps.
Ok, so I get the first buzz, then immediately i left the up button to press the down button while connecting to pc with flashmode ready? I don't know what i'm doing wrong, because it just starts to loop again.
Try reinstalling your Flash tool & the drivers of your device is might help you to detect flashboot
Sent from my LT26i using xda app-developers app
Archector said:
Ok, so I get the first buzz, then immediately i left the up button to press the down button while connecting to pc with flashmode ready? I don't know what i'm doing wrong, because it just starts to loop again.
Click to expand...
Click to collapse
No you can not let it buzz. You must let go as soon as you see the screen start to bleed out. It does this just before the first buzz. Again if you watch it while holding the buttons the screen will start to shut off. As soon as you see it you must let go of the buttons. If you do it right it will shut off and then you can try to connect it with flash mode. Also before you set up your flash make sure the device connects and loads the flash driver. Then you can flash your file.
zackspeed said:
When you do the reset with power and volume there is actually three phases. We know about the one buzz and three buzz. If you have payed attention while doing it you may have noticed that just before the first buzz the screen will bleed out and shut off. If you do that after it starts to loop from charging it should then allow you to plug it in to the computer in flash mode.
Keep in mind if it does buzz you will most likely have to start over. So as soon as you see it let go of the buttons. Hope it helps.
Click to expand...
Click to collapse
I'm new to the Ion, so I don't understand this thing about the one buzz and three buzzes... can you explain what this means?
EEngineer said:
I'm new to the Ion, so I don't understand this thing about the one buzz and three buzzes... can you explain what this means?
Click to expand...
Click to collapse
The newer Sony devices have a reset function seeing as most have internal battery's. By holding the power and volume + keys it will do one of three things.
1 After about three seconds the screen will go off almost like it bleeds out. This is force shut off.
2 If you keep holding the buttons it will buzz once. This is force reboot.
3 If you continue to hold them it will buzz three times. This is a force reset. Almost like a battery pull type situation.
Thanks so much.
With a stock kernel, how reliable is this?
_______________________________________
Sent from my G2X using the XDA App. Please excuse my brevity.
This is hardware integrated function.. Even if you flash any other kernel.. This function still remains the same.
Sent from my LT26i using xda app-developers app
Hey everyone,
So, I got a new Xperia XA1 Ultra (G3223) through a trade running stock Android 7.0. Checked everything and initially it looked fine.
Over the last few days, things have been acting weird. Every time I start the device, it gives me a blank (black) screen with a blinking white notification light - it doesn't even show me the boot screen at times when it boots. Just yesterday, I got it to boot by pressing VOLUME UP + POWER after being in that state - but, that's not normal. Does anyone know why in the world my phone does that?
Furthermore, when using the Sony charger that came with the device, it takes over 6 hours to charge and doesn't even show the charging sign while charging. Could this be an Android 7.0 bug or is something seriously wrong with my phone? Only one time since I got it, did I get it to charge normal with the charging sign and everything; it actually charged quite rapidly at that point.
Any help would be appreciated with this, guys, because I'm at a loss. I do want to mention that the device doesn't seem to be recognized by the computer, so I'm not even sure that the cable is original.
vince.lupe said:
Furthermore, when using the Sony charger that came with the device, it takes over 6 hours to charge and doesn't even show the charging sign while charging. Could this be an Android 7.0 bug or is something seriously wrong with my phone? Only one time since I got it, did I get it to charge normal with the charging sign and everything; it actually charged quite rapidly at that point.
Any help would be appreciated with this, guys, because I'm at a loss. I do want to mention that the device doesn't seem to be recognized by the computer, so I'm not even sure that the cable is original.
Click to expand...
Click to collapse
Try a new cable and/or charger. (I found I had a bad charger once)
Since you had computer issues, I'd start with the cable. Also check the charging port on the phone for debris/damage.
avg2424 said:
Try a new cable and/or charger./QUOTE]
Okay, I'll do that - but, do you have any idea regarding the blank screen issue, my friend?
Click to expand...
Click to collapse
vince.lupe said:
Okay, I'll do that - but, do you have any idea regarding the blank screen issue, my friend?
Click to expand...
Click to collapse
How is your phone turning on? Power button or inserting the USB cable?
Only thing I can think of is perhaps a stuck volume key placing the phone into recovery or flash mode.
Try turning on the phone with no USB cable attached. Before you turn it on, press the volume keys a few times to make sure they aren't stuck and then power on.
avg2424 said:
How is your phone turning on? Power button or inserting the USB cable?
Only thing I can think of is perhaps a stuck volume key placing the phone into recovery or flash mode.
Try turning on the phone with no USB cable attached. Before you turn it on, press the volume keys a few times to make sure they aren't stuck and then power on.
Click to expand...
Click to collapse
The thing is that it's weird.... For one, sometimes when I use the touch reset/turn off button, it takes at least two minutes to reset, or it doesn't even reset. Then, when I turn the phone on while it's off, the phone sometimes enters into this weird state with the flashing white notification light. I never power on the phone via USB cable, so I don't know, really. Yesterday, I shut the phone off to test it, plugged the phone in to charge it, it wouldn't charge while off, but then hit power on, and then it wouldn't turn on, so I used VOLUME UP + POWER, and then it turned on just fine.
Hi
Happened also to be with my older Xperia J.
Backup your phone (cause you'll lose your data), connect it to a PC (or Mac) and install Xperia companion, then select "repair phone" or something similar (I know the written in Italian version ).
Wait and it will be all fine.
Regards
Faby:highfive:
vince.lupe said:
The thing is that it's weird.... For one, sometimes when I use the touch reset/turn off button, it takes at least two minutes to reset, or it doesn't even reset. Then, when I turn the phone on while it's off, the phone sometimes enters into this weird state with the flashing white notification light. I never power on the phone via USB cable, so I don't know, really. Yesterday, I shut the phone off to test it, plugged the phone in to charge it, it wouldn't charge while off, but then hit power on, and then it wouldn't turn on, so I used VOLUME UP + POWER, and then it turned on just fine.
Click to expand...
Click to collapse
faby GT said:
Hi
Happened also to be with my older Xperia J.
Backup your phone (cause you'll lose your data), connect it to a PC (or Mac) and install Xperia companion, then select "repair phone" or something similar (I know the written in Italian version ).
Wait and it will be all fine.
Regards
Faby:highfive:
Click to expand...
Click to collapse
Okay, let me see if I can get it to connect to the computer, and then I'll let you know if I have progress.
I have the same slow charging problem on my xperia xa1 ultra. you could solve it?
I have a Nokia 6.1 TA-1043. I have not unlocked the bootloader, and it runs the default operating system (Android One, probably Nokia flavoured). It has gotten slower over the years, and it had a period where it crashed every now and then (sudden reboot). Anyway , some days ago I decided to reboot the phone because it was slow, and it instantly shut off. After waiting probably 20 seconds without response, I decided to hold the power button down to force it. I don't remember exactly what I did, but after trying to again hold the button down to turn it on again, it vibrated as usual but the screen remained black. I then most likely tried holding volume + and power to force another reboot, unsuccessfully. I then tried holding volume - and power to enter download mode. It might have vibrated, or I might have touched the cable making me think it vibrated, but nothing happened. I pressed some random buttons after I think.
Now, the phone does seem to charge. It gets warm when I plug in the charger. I've searched for hours on different forums, and some people say that their phone was magically resurrected after the battery went completely flat after few days. I have tried plugging the phone a bit and testing every button combination (including volume +, volume - and power at the same time) for a few days now. It's dead.
The phone is also seemingly not recognised at all on my windows 10 PC. Haven't tried on Linux.
I have a few theories:
1. The phone simply hard bricked itself due to some hardware failure.
2. I bricked the phone by (blindly due to screen being blank) entering recovery mode and unknowingly factory resetting the phone and shutting it off mid process.
3. The battery is messed up? Some suggest deconnecting the battery. It would require the use of a heat gun to even open the phone though.
I've seen some people suggest entering EDL-mode either by shorting some pins or using a modified USB-cable. However, that would either require opening a phone that isn't supposed to be opened easily, or plugging a modified USB-cable into my computer, nether of which seem safe. I've also seen people mention that whatever needs to be flashed in EDL-mode must be signed by Nokia, which I can't do obviously haha.
It's probably time to move on right? Has someone managed to get a phone in that state to work again?
Hi i can explain some of your theories:
The first one: It's impossible to make the phone hard bricked itself.
The second one: Factory reset is only wipe your data not the OS itself so if you Factory reset and force reboot it should get in to Download mode and you need to unlock bootloader to reflash the ROM. (I'm not in that situation so I'm not sure it's correct or not.)
The third one: No, I don't think so.
That's all so if you have any question ask me. Thanks!
alprtewwqfr said:
Hi i can explain some of your theories:
The first one: It's impossible to make the phone hard bricked itself.
The second one: Factory reset is only wipe your data not the OS itself so if you Factory reset and force reboot it should get in to Download mode and you need to unlock bootloader to reflash the ROM. (I'm not in that situation so I'm not sure it's correct or not.)
The third one: No, I don't think so.
That's all so if you have any question ask me. Thanks!
Click to expand...
Click to collapse
Thanks for replying My phone seems unresponsive, so I haven't managed to get in to download mode, at least not visually on the screen. Also, my phone is not recognised on PC, making me suspect it's not really turned on. I also tried holding volume up + power for 40+ minutes by stuffing it between a few books when making dinner haha, and it still didn't respond. Would you move on in this situation?
speedrocket2110 said:
Thanks for replying My phone seems unresponsive, so I haven't managed to get in to download mode, at least not visually on the screen. Also, my phone is not recognised on PC, making me suspect it's not really turned on. I also tried holding volume up + power for 40+ minutes by stuffing it between a few books when making dinner haha, and it still didn't respond. Would you move on in this situations
Click to expand...
Click to collapse
I don't know because I'm not in that situation, but I had a similar one but only boot to download mode.