Related
Hello there,
I'm using Arconium final with doomkernel and baseband 36+patches.
My installation order is as follows:
1. flashing baseband.36
2. flashing kernel
3. boot into cwm and do a factory reset
4. go to advanced and clear dalvic cache and battery stats
5. flash arconium+timescape+sound mod
6. flash baseband libs
7. reboot
Now I don't have any space on my internal memory. There even isn't any space shown. I do not know how to solve this
I've attached a screenshoot so you know what I mean. I can't use the market as it complains "no space left".
Strange.
No problems here.
Flash the stock ROM again and repeat the installation of Arconium.
Sent from my LT15i using XDA Premium App
Try to use app2sd or Link2SD, you can move user apps to the sd card.
eawert said:
Try to use app2sd or Link2SD, you can move user apps to the sd card.
Click to expand...
Click to collapse
This don't solve problem itself.
Fresh stock flash is best option like Flo95 tell us.
Sent from my MT15i using Tapatalk
A really strange problem, haven't seen such thing before.
But only thing to fix it, would be flash stock and then Acronium again like Flo95 already described, imo.
Try flashing 36-baseband and its libs after flashing arconium+timescape+sound mod..
Thank you very much!
I've flashed generic stock rom and then arconium again. All is fine now.
Maybe it was because I have had miui on it before?
S-offed and rooted when I first got it. Removed all the bloatware, and got some needed space back. Tried to install custom ROMS that I found off of xda. When flashed the Rom with unofficial cwm recovery, the phone booted back up, but with no signal. When trying to connect through WiFi, under the quick settings option said "Error". Cannot use WiFi or get a signal. Was wondering if it had anything to do with the bootloader not being unlocked. Went to htcdev.com to unlock bootloader, downloaded the Rom update utility for the virgin mobile wildfire s, the ruu told me my Rom image needed updated. After starting the update, phone reboited with the silver HTC on the screen, then shut off and restarted only to be told by my computer that there was a "device id" error. Anyone know why no signal with custom flashed ROMS? Thanks.
TheKnux said:
S-offed and rooted when I first got it. Removed all the bloatware, and got some needed space back. Tried to install custom ROMS that I found off of xda. When flashed the Rom with unofficial cwm recovery, the phone booted back up, but with no signal. When trying to connect through WiFi, under the quick settings option said "Error". Cannot use WiFi or get a signal. Was wondering if it had anything to do with the bootloader not being unlocked. Went to htcdev.com to unlock bootloader, downloaded the Rom update utility for the virgin mobile wildfire s, the ruu told me my Rom image needed updated. After starting the update, phone reboited with the silver HTC on the screen, then shut off and restarted only to be told by my computer that there was a "device id" error. Anyone know why no signal with custom flashed ROMS? Thanks.
Click to expand...
Click to collapse
Have you been flashing GSM roms? If so i believe this have been caused because of that. Roms that you should flash on your phone should be CDMA only.
I'm not sure. I mean I'm pretty sure they're CDMA roms cause I searched "htc wildfire s virgin mobile cdma custom roms" on Google and found like 5 or 6 roms. I've been trying to get some sense 3.5 roms for it but I've been having problems with no service.
If you go to the Wildfire S Android Development section, there are several active threads for Marvelc phones.
Try:
-[Rom] [Kernel] [Soff] [Many More] Team MarvelUSc which has a ton of stock ROMS and custom ROMs.
-[WFSDEV][AROMA] .sense, a customizable Sense 3.5 ROM for the Wildfire S & Salsa which is a Sense 3.5 ROM with some Marvelc support (some users have reported issues).
-[WIP] [ROM] [AOSPKERNEL] SSCM7 for CDMA Wildfire S which works with bugs with MMS and the camera.
One of those should work for you. These are just some examples of popular threads. There are many, many more ROMs out there.
Thank you. Sorry for being lazy and not looking through all the threads, there are just so many out there and I don't always know exactly where to look. That's why I just made my own topic so I could get some user/dev advice quicker. Also, does Astro File Manager let you change folder permissions such as read/write? I.e. I'm trying to delete the virgin mobile boot animation and it wouldn't let me.
ASTRO does not permit you to change root directories as it does have root privileges.
It is best to use Root Explorer or Root Browser, or something similar.
I use Root Browser and never have any issues and it's free. You can easily change permissions, copy & paste files and folders, etc. I have never personally tried Root Explorer.
Thank you for l the replies. Thought I wouldn't hear anything back for awhile. Gonna download root browser and try that out. Got the playstation one boot logo with sound and wanna try it out but gotta get rid of the vm one first cause its really obnoxious. If anyone has cdma roms or come across any will you post them in this topic so I can try them out?
I'm running jmz's v1.5 right now, just make sure u partition your SD card for it.
Sent from my HTC_A510c using xda premium
Is it a sense 3.5 rom and if so could you provide the link for me so I can test it? I have a 32gb SD card with 28gb free. How much should I partition it?
I partition 512mb and about 60 swap run dalvik off sdcard using app2sd. Works great. Really smooth 2.1 rom.
P.S. kernel oc's to 806 mhz
Sent from my HTC_A510c using XDA
I'm new with the app2sd and data2sd and I'm eerie about messing with it until I read more or get more feedback on it. I did read about increasing my internal storage to 150mb with data2sd and partitioning my SD card but I'm kind of scared to do it cause I'm afraid something will go wrong.
TheKnux said:
I'm new with the app2sd and data2sd and I'm eerie about messing with it until I read more or get more feedback on it. I did read about increasing my internal storage to 150mb with data2sd and partitioning my SD card but I'm kind of scared to do it cause I'm afraid something will go wrong.
Click to expand...
Click to collapse
The internal storage is 150mb all the time unless u use a partition. It's very simple to do, just make sure u copy all your music, pix, etc to a computer before making the partition as this will format your card.
Sent from my HTC_A510c using xda premium
TheKnux said:
I'm new with the app2sd and data2sd and I'm eerie about messing with it until I read more or get more feedback on it. I did read about increasing my internal storage to 150mb with data2sd and partitioning my SD card but I'm kind of scared to do it cause I'm afraid something will go wrong.
Click to expand...
Click to collapse
Its very easy. If you don't have anything worth saving on your sd card (or if you do, back it all up on the computer), go to recovery choose advanced then partition sd card. Then it will ask you the size. Choose whatever you want. I chose 1GB just to be on the safe side in case i decide to go app crazy. Then everything else is automatic.
If you want to go further and free up more of your /data partition use the apps2sd app and move dalvik-cache to SD.
What apps2sd program do I use and where can I get it?
If u r using jmz's rom it has the apps2sd GUI app preinstalled. U can use it to move dalvik cache to SD, zipalign on boot, etc, but once u make the partition and install the ROM, your apps will automatically move to your SD partition. No need to do it manually.
Sent from my HTC_A510c using xda premium
Im not using any custom roms at the moment because i cant find any that will work for my phone. The roms will load but my virgin mobile service wont start-up and i keep getting phone.Android is not responding message.
TheKnux said:
Im not using any custom roms at the moment because i cant find any that will work for my phone. The roms will load but my virgin mobile service wont start-up and i keep getting phone.Android is not responding message.
Click to expand...
Click to collapse
Use my Rom. Works perfectly with virgin mobile as that's what I have
Sent from my PG41200 using XDA Premium HD app
TheKnux said:
Im not using any custom roms at the moment because i cant find any that will work for my phone. The roms will load but my virgin mobile service wont start-up and i keep getting phone.Android is not responding message.
Click to expand...
Click to collapse
Make sure u have cwm 5.0.2.6 if u have a different one u could run
Into problems, also check your hboot. I'm on 1.06 and recommend the same. Also make sure u r clearing dalvik cache, formatting boot, data, system, cache, and SD ext before installing ROM. I would also create a new partition of 512, so it will be a completely clean install. If u have done everything right u will have no problems, if something wrong has happened, most likely it was an error u made and can be fixed.
Sent from my HTC_A510c using Tapatalk
If your phone is acting funny you could try superwipe by simonsimons. I did just because I was flashing so many roms and mods everyday
He has also posted original stock ruu's. I recommend jmz's rom it's been working perfectly, and I've tried the others. Most mods have flashed without issues.
Sent from my HTC_A510c using XDA
I partitioned my SD card for 4gb with a 256mb swap (which I don't quite know what that means) I have a 32gb class 10 SD card and I don't even use a 1/3 of the space so I figured I'd partition using the biggest option available. I flashed jmz's rom and everything went okay. I currently have 102mb of internal free by using the link2sd method and I ended up flashing back to the stock vm Tom cause I didn't like how jmz's only had around 56mb free. Is there any way to get more than 56 or is that cause all of the stuff on the rom?
Hi all,
My wife has a wildfire s, but she has some problem with her storage. The phone say that she has no memory, but she has a sd card of 16gb.
So, how can I do?
To put my sd card to primary.
Please help. What can I do.
Thanks.
Sent from my HTC One X using xda app-developers app
R.ThierryHOX said:
Hi all,
My wife has a wildfire s, but she has some problem with her storage. The phone say that she has no memory, but she has a sd card of 16gb.
So, how can I do?
To put my sd card to primary.
Please help. What can I do.
Thanks.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
which types of warning she getting?
like wildfire s has low internal memory so she can't install much apps and all apps wont go in external card.
She get a popup that say "make more space" "move apps to sd card or phone storage" but when she do it, they don't give any apps to move .
Sent from my HTC One X using xda app-developers app
R.ThierryHOX said:
She get a popup that say "make more space" "move apps to sd card or phone storage" but when she do it, they don't give any apps to move .
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
they wont move.its just a warning that space is low.
her phone is rooted? if yes then several things you can do to install more apps.
or if not, then you cant do anything.you have to sort out in low space.and she can't install much apps.you can see internal space in settings>applications>manage applications at bottom bar.
crossfire77 said:
they wont move.its just a warning that space is low.
her phone is rooted? if yes then several things you can do to install more apps.
or if not, then you cant do anything.you have to sort out in low space.and she can't install much apps.you can see internal space in settings>applications>manage applications at bottom bar.
Click to expand...
Click to collapse
She is not rooted. But i will root it this week.
So can you told me what is those things i can do.
I'll root her wildfire s in some days. So can you told me how can i root it.
And need i to stay on stock rom? What is the best rom or kernel or whatever other things.
Thanks
I am using stock rom too.
There are many roms like cm9 which is ICS build and others are cm10 which are jelly bean builds..
You can find roms on android devlopement thread.
And for internal storage tweak first of all you need to partition your sdcard.
FAT32 :remaining
EXT3/EXT4 : 1 GB ll be enough
LINUX SWAP : 512 MB
linux swap partition isnt madatory except link2sd.but you hv 16 GB memory card so make that partition too.it works as backup RAM.its 512 MB because wildfire s has 512 MB RAM.
ALL PARTITIONS SHOULD BE PRIMARY AND YOU CAN MAKE THEM BY MINIPARTITIONAL TOOL ON WINDOWS.
There are many tweaks for internal memory link2sd,mounts2sd and int2ext+
Best one is int2ext+ but for that you need custom rom with init.d suppport..
Tell me if u need more help.good luck
Sent from my HTC Wildfire S A510e using Tapatalk 2
crossfire77 said:
I am using stock rom too.
There are many roms like cm9 which is ICS build and others are cm10 which are jelly bean builds..
You can find roms on android devlopement thread.
And for internal storage tweak first of all you need to partition your sdcard.
FAT32 :remaining
EXT3/EXT4 : 1 GB ll be enough
LINUX SWAP : 512 MB
linux swap partition isnt madatory except link2sd.but you hv 16 GB memory card so make that partition too.it works as backup RAM.its 512 MB because wildfire s has 512 MB RAM.
ALL PARTITIONS SHOULD BE PRIMARY AND YOU CAN MAKE THEM BY MINIPARTITIONAL TOOL ON WINDOWS.
There are many tweaks for internal memory link2sd,mounts2sd and int2ext+
Best one is int2ext+ but for that you need custom rom with init.d suppport..
Tell me if u need more help.good luck
Sent from my HTC Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
Okay thanks. And yes, i'll need your help. (Really need your help). By a step by step, what to do, what to download. just all about that.
And starting by what is the best method you suggest me to root the wildfire s, and what rom you advise me. All the best for it.
Thanks, many thanks.
You are my saviour.
R.ThierryHOX said:
Okay thanks. And yes, i'll need your help. (Really need your help). By a step by step, what to do, what to download. just all about that.
And starting by what is the best method you suggest me to root the wildfire s, and what rom you advise me. All the best for it.
Thanks, many thanks.
You are my saviour.
Click to expand...
Click to collapse
haha.okay man dnt worry.
so for rooting.follow this tutorial:
http://www.htcwildfiresblog.com/2012/03/guide-to-rooting-htc-wildfire-s-235-s.html
in this tutorial first you need to make account from htcdev.com and then follow instructions on that page:
(IN TUTORIAL YOU FIND STEP 1,UPDATE YOUR BOOTLOADER BUT IF YOUR PHONE HAS LATEST UPDATE 2.26 ,THEN YOU DONT NEED TO UPDATE IT.YOU WILL SEE THAT INSTUCTION ON HTCDEV.COM PAGE)
then,
download rom manager from play store and install clockworkmod recovery.( its necessery to flash rom,mods etc)
and most important, after flashing custom recovery(clockworkmod) make backup of your current rom.because if you want to come back to your stock rom,it ll be helpfull.
about roms:
there are stable cm9 as well as cm10 roms.
cm9 is very stable,no major bugs except little lag on camera ( negligible) and camcorder record at 15 fps.
cm10 has some bugs but you can see jellyking rom on android devlopement page.people said its very stable.so you can use it if you want taste of jelly bean.
and there are another option like MIUI which has best UI. and sense 3.5 roms.
thats all.
i am using my stock rom because i like my sense best,stable,not a single bug and works good.
hi im using currently mildwild 9.5 based on redux
and it crash a lot, so i need alternative ROM that will automatically save apps to my SD partition like this ROM i have - i dont like these app2sd never transfer everything on SD and i get low on space
any suggestions?
Night5talker said:
hi im using currently mildwild 9.5 based on redux
and it crash a lot, so i need alternative ROM that will automatically save apps to my SD partition like this ROM i have - i dont like these app2sd never transfer everything on SD and i get low on space
any suggestions?
Click to expand...
Click to collapse
MW9.5 is very stable. How did you partition your SD card? Suggest you to wipe everything, re-partition if needed and flash. Everything should be working just fine.
Alternatively, you can try other MW ROMs like the one based on CM or oxygen. They're working perfectly too.
Sent from my Nexus 10 using Tapatalk HD
dvsk69 said:
MW9.5 is very stable. How did you partition your SD card? Suggest you to wipe everything, re-partition if needed and flash. Everything should be working just fine.
Alternatively, you can try other MW ROMs like the one based on CM or oxygen. They're working perfectly too.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
dont know why my keep crashing... i get popup msg that something xperia has crashed and then force close option... (will update once i get msg again) and it happens randomly
MSG is : "activity xperia home (in application xperia home) is not responding"
how do i know which ROM has auto move to SD card?
How did you partition your SD?
If you want to know if a ROM has a2sd read the ROM post.
Sent from my HTC Desire using xda app-developers app
chromium96 said:
How did you partition your SD?
If you want to know if a ROM has a2sd read the ROM post.
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
i used 4ext to partition it
i wiped it all and used its partitioning used 512 MB and 0 for that other thing
it works well just rom sometimes crashes
Night5talker said:
i used 4ext to partition it
i wiped it all and used its partitioning used 512 MB and 0 for that other thing
it works well just rom sometimes crashes
Click to expand...
Click to collapse
AFAIK this ROM is very stable. Try doing a full wipe and reflash.
chromium96 said:
AFAIK this ROM is very stable. Try doing a full wipe and reflash.
Click to expand...
Click to collapse
can you link it cant find in search or full name
You are probably low on space because you are still on stock hboot.
Nandroid backup and change hboot using fastbout commands, search for guides. There are custom hboots posted in that thread if your search. Or just use something like cm7r2 hboot.
512mb is also quite small, you can use at least 1gb.
Check everything is working by installing another app like diskusage to browse all your partitions.
Night5talker said:
can you link it cant find in search or full name
Click to expand...
Click to collapse
AFAIK= as far as I know.
I meant the ROM that you are running is stable, so its likely a problem on your end. Try doing a full wipe and reinstall it.
Sent from my HTC Desire using xda app-developers app
So I recently switched back to stock and saw a big difference in gaming performance once it was rooted and debloated. However I could never get Link2SD to see the ext4 partition. It just says "error unable to mount" or something along those lines.
But if I flash an alternate kernel like DoomKernel or Lupus then no issues. I have been using Link2SD for a quite a while now... and no matter how i try it with stock kernel Link2SD just doesnt see or is unable to mount the partition to install the libs needed for it to work.
Anyone give me any suggestions/ideas?
I have followed this quide before and repeatedly now to try and make stock kernel work... same results.
http://www.xperiablog.net/2011/12/12/link2sd-guide-never-worry-about-internal-memory-limits-again/
Anyone? I tried it again and gave it root permisions however it still comes up as "no mount device" Despite it seeing the Fat32 partition, it just wont see the Ext4 partition with stock kernel. But again soon as I flash an alternate kernel... BAM! see it no problem.
Does anyone have any ideas why stock kernel wont see it? Nothing in the tutorial says it has to be a modified kernel. Simply root only.
I dont know, the 2.6 linux kernel should actually support ext4.
Make sure that the format of ur second partition is same that u want to use in link2sd. For example if ur second partition is fat so in link2sd choose fat 16/32. Or maybe u may need to recreate again the second partition.
Sent from my R800a
---------- Post added at 09:52 PM ---------- Previous post was at 09:47 PM ----------
ozzmanj1 said:
Does anyone have any ideas why stock kernel wont see it? Nothing in the tutorial says it has to be a modified kernel. Simply root only.
Click to expand...
Click to collapse
I dont have any problem when i use link2sd on stock. But for me right now using latest lupus kernel combine i get more space for internal storage
Sent from my R800a
HEZAiKU said:
Make sure that the format of ur second partition is same that u want to use in link2sd. For example if ur second partition is fat so in link2sd choose fat 16/32. Or maybe u may need to recreate again the second partition.
Sent from my R800a
---------- Post added at 09:52 PM ---------- Previous post was at 09:47 PM ----------
I dont have any problem when i use link2sd on stock. But for me right now using latest lupus kernel combine i get more space for internal storage
Sent from my R800a
Click to expand...
Click to collapse
I always use ext4 so I know its the same format. I did though format to ext2 and again link2sd simply does not see. I am stumped why its not working.
Sent from my R800at using xda premium
I always use ext4 so I know its the same format. I did though format to ext2 and again link2sd simply does not see. I am stumped why its not working.
Sent from my R800at using xda premium
Make sure to set the partition as primary, not as logical when formating
As I have said I have been using Link2SD for about 8 months now both on my current Xperia PLAY and my old R800x. I am well aware of how to use the software, and the process for setting it up.
Again though everything I try with stock kernel Link2SD will not work even after it gets root access. Now if I switch the stock kernel to say Lupus or DoomKernel it works without a hitch. Otherwise on stock it gives me a error of:
No Mount Device.... something along that line.
I am stumped. Also just to be clear even on my R800x I was using DoomKernel,
ozzmanj1 said:
As I have said I have been using Link2SD for about 8 months now both on my current Xperia PLAY and my old R800x. I am well aware of how to use the software, and the process for setting it up.
Again though everything I try with stock kernel Link2SD will not work even after it gets root access. Now if I switch the stock kernel to say Lupus or DoomKernel it works without a hitch. Otherwise on stock it gives me a error of:
No Mount Device.... something along that line.
I am stumped. Also just to be clear even on my R800x I was using DoomKernel,
Click to expand...
Click to collapse
I had the same problem using a stock kernel in the past. I never did come to solve why, Just thought I would reply and let you know that you aren't the only one, I think TLRtheory has used links2sd on stock kernel for-just-about-ever?
216Monster said:
I had the same problem using a stock kernel in the past. I never did come to solve why, Just thought I would reply and let you know that you aren't the only one, I think TLRtheory has used links2sd on stock kernel for-just-about-ever?
Click to expand...
Click to collapse
Yeah and thats why I wanted to make it work. I instaleld on a fresh copy of stock ROM, MC4 and it was fluid and smooth.
How about using fat instead ext? Maybe its work.
I remember that i try it on samsung galaxy ace without using any custom kernel.
U can ignore this if is still not working.
I also experience this, but only with stock & non modded kernel. Original kernel just can't support Link2d, Swapper, and can't overclock the CPU frequency.
It's maybe more faster & stable, but.... u know the difference, don't ya?
they will be always pros & con's
Sent from my R800i using xda premium
Im on stock kernal and running link2SD no problems at all, the secondary partition is formatted as fat32
Sent from my R800i using xda premium
Nice.... can u use Swapper too?
Sent from my R800i using xda premium
Slvrback said:
Im on stock kernal and running link2SD no problems at all, the secondary partition is formatted as fat32
Sent from my R800i using xda premium
Click to expand...
Click to collapse
When you plug in a USB cable to your computer does it see both partitions?
Sent from my R800at using xda premium
ozzmanj1 said:
When you plug in a USB cable to your computer does it see both partitions?
Sent from my R800at using xda premium
Click to expand...
Click to collapse
No, when I made the second partition it said that the partition would not be seen by windows
Sent from my R800i using xda premium
HISTORY stssmod
ozzmanj1 said:
So I recently switched back to stock and saw a big difference in gaming performance once it was rooted and debloated. However I could never get Link2SD to see the ext4 partition. It just says "error unable to mount" or something along those lines.
But if I flash an alternate kernel like DoomKernel or Lupus then no issues. I have been using Link2SD for a quite a while now... and no matter how i try it with stock kernel Link2SD just doesnt see or is unable to mount the partition to install the libs needed for it to work.
Anyone give me any suggestions/ideas?
I have followed this quide before and repeatedly now to try and make stock kernel work... same results.
Click to expand...
Click to collapse
Hi,
Does your ROM support the script with files in the folder \system\etc\init.d ?
Check it with "Pimp My Rom" from google play market.
Cheers
Sprint_ST_1050 said:
Hi,
Does your ROM support the script with files in the folder \system\etc\init.d ?
Check it with "Pimp My Rom" from google play market.
Cheers
Click to expand...
Click to collapse
Yes, that folder is listed, I looked into it first thing but the fact its there doesnt mean its working.... per se.
ozzmanj1 said:
Yes, that folder is listed, I looked into it first thing but the fact its there doesnt mean its working.... per se.
Click to expand...
Click to collapse
And what says "pimp my Rom"?
there is a test inside to check if it's working or not...
----------- TOOLS -----------
***Universal Init.d Support***
Enable init.d support with absolutely ANY kernel.
This tool is the first completely universal method for granting init.d support, for the simple reason that everything happens on the app side.
Click to expand...
Click to collapse
I will have to test it with pimp my rom
Sent from my R800at using xda premium