S-offed and rooted when I first got it. Removed all the bloatware, and got some needed space back. Tried to install custom ROMS that I found off of xda. When flashed the Rom with unofficial cwm recovery, the phone booted back up, but with no signal. When trying to connect through WiFi, under the quick settings option said "Error". Cannot use WiFi or get a signal. Was wondering if it had anything to do with the bootloader not being unlocked. Went to htcdev.com to unlock bootloader, downloaded the Rom update utility for the virgin mobile wildfire s, the ruu told me my Rom image needed updated. After starting the update, phone reboited with the silver HTC on the screen, then shut off and restarted only to be told by my computer that there was a "device id" error. Anyone know why no signal with custom flashed ROMS? Thanks.
TheKnux said:
S-offed and rooted when I first got it. Removed all the bloatware, and got some needed space back. Tried to install custom ROMS that I found off of xda. When flashed the Rom with unofficial cwm recovery, the phone booted back up, but with no signal. When trying to connect through WiFi, under the quick settings option said "Error". Cannot use WiFi or get a signal. Was wondering if it had anything to do with the bootloader not being unlocked. Went to htcdev.com to unlock bootloader, downloaded the Rom update utility for the virgin mobile wildfire s, the ruu told me my Rom image needed updated. After starting the update, phone reboited with the silver HTC on the screen, then shut off and restarted only to be told by my computer that there was a "device id" error. Anyone know why no signal with custom flashed ROMS? Thanks.
Click to expand...
Click to collapse
Have you been flashing GSM roms? If so i believe this have been caused because of that. Roms that you should flash on your phone should be CDMA only.
I'm not sure. I mean I'm pretty sure they're CDMA roms cause I searched "htc wildfire s virgin mobile cdma custom roms" on Google and found like 5 or 6 roms. I've been trying to get some sense 3.5 roms for it but I've been having problems with no service.
If you go to the Wildfire S Android Development section, there are several active threads for Marvelc phones.
Try:
-[Rom] [Kernel] [Soff] [Many More] Team MarvelUSc which has a ton of stock ROMS and custom ROMs.
-[WFSDEV][AROMA] .sense, a customizable Sense 3.5 ROM for the Wildfire S & Salsa which is a Sense 3.5 ROM with some Marvelc support (some users have reported issues).
-[WIP] [ROM] [AOSPKERNEL] SSCM7 for CDMA Wildfire S which works with bugs with MMS and the camera.
One of those should work for you. These are just some examples of popular threads. There are many, many more ROMs out there.
Thank you. Sorry for being lazy and not looking through all the threads, there are just so many out there and I don't always know exactly where to look. That's why I just made my own topic so I could get some user/dev advice quicker. Also, does Astro File Manager let you change folder permissions such as read/write? I.e. I'm trying to delete the virgin mobile boot animation and it wouldn't let me.
ASTRO does not permit you to change root directories as it does have root privileges.
It is best to use Root Explorer or Root Browser, or something similar.
I use Root Browser and never have any issues and it's free. You can easily change permissions, copy & paste files and folders, etc. I have never personally tried Root Explorer.
Thank you for l the replies. Thought I wouldn't hear anything back for awhile. Gonna download root browser and try that out. Got the playstation one boot logo with sound and wanna try it out but gotta get rid of the vm one first cause its really obnoxious. If anyone has cdma roms or come across any will you post them in this topic so I can try them out?
I'm running jmz's v1.5 right now, just make sure u partition your SD card for it.
Sent from my HTC_A510c using xda premium
Is it a sense 3.5 rom and if so could you provide the link for me so I can test it? I have a 32gb SD card with 28gb free. How much should I partition it?
I partition 512mb and about 60 swap run dalvik off sdcard using app2sd. Works great. Really smooth 2.1 rom.
P.S. kernel oc's to 806 mhz
Sent from my HTC_A510c using XDA
I'm new with the app2sd and data2sd and I'm eerie about messing with it until I read more or get more feedback on it. I did read about increasing my internal storage to 150mb with data2sd and partitioning my SD card but I'm kind of scared to do it cause I'm afraid something will go wrong.
TheKnux said:
I'm new with the app2sd and data2sd and I'm eerie about messing with it until I read more or get more feedback on it. I did read about increasing my internal storage to 150mb with data2sd and partitioning my SD card but I'm kind of scared to do it cause I'm afraid something will go wrong.
Click to expand...
Click to collapse
The internal storage is 150mb all the time unless u use a partition. It's very simple to do, just make sure u copy all your music, pix, etc to a computer before making the partition as this will format your card.
Sent from my HTC_A510c using xda premium
TheKnux said:
I'm new with the app2sd and data2sd and I'm eerie about messing with it until I read more or get more feedback on it. I did read about increasing my internal storage to 150mb with data2sd and partitioning my SD card but I'm kind of scared to do it cause I'm afraid something will go wrong.
Click to expand...
Click to collapse
Its very easy. If you don't have anything worth saving on your sd card (or if you do, back it all up on the computer), go to recovery choose advanced then partition sd card. Then it will ask you the size. Choose whatever you want. I chose 1GB just to be on the safe side in case i decide to go app crazy. Then everything else is automatic.
If you want to go further and free up more of your /data partition use the apps2sd app and move dalvik-cache to SD.
What apps2sd program do I use and where can I get it?
If u r using jmz's rom it has the apps2sd GUI app preinstalled. U can use it to move dalvik cache to SD, zipalign on boot, etc, but once u make the partition and install the ROM, your apps will automatically move to your SD partition. No need to do it manually.
Sent from my HTC_A510c using xda premium
Im not using any custom roms at the moment because i cant find any that will work for my phone. The roms will load but my virgin mobile service wont start-up and i keep getting phone.Android is not responding message.
TheKnux said:
Im not using any custom roms at the moment because i cant find any that will work for my phone. The roms will load but my virgin mobile service wont start-up and i keep getting phone.Android is not responding message.
Click to expand...
Click to collapse
Use my Rom. Works perfectly with virgin mobile as that's what I have
Sent from my PG41200 using XDA Premium HD app
TheKnux said:
Im not using any custom roms at the moment because i cant find any that will work for my phone. The roms will load but my virgin mobile service wont start-up and i keep getting phone.Android is not responding message.
Click to expand...
Click to collapse
Make sure u have cwm 5.0.2.6 if u have a different one u could run
Into problems, also check your hboot. I'm on 1.06 and recommend the same. Also make sure u r clearing dalvik cache, formatting boot, data, system, cache, and SD ext before installing ROM. I would also create a new partition of 512, so it will be a completely clean install. If u have done everything right u will have no problems, if something wrong has happened, most likely it was an error u made and can be fixed.
Sent from my HTC_A510c using Tapatalk
If your phone is acting funny you could try superwipe by simonsimons. I did just because I was flashing so many roms and mods everyday
He has also posted original stock ruu's. I recommend jmz's rom it's been working perfectly, and I've tried the others. Most mods have flashed without issues.
Sent from my HTC_A510c using XDA
I partitioned my SD card for 4gb with a 256mb swap (which I don't quite know what that means) I have a 32gb class 10 SD card and I don't even use a 1/3 of the space so I figured I'd partition using the biggest option available. I flashed jmz's rom and everything went okay. I currently have 102mb of internal free by using the link2sd method and I ended up flashing back to the stock vm Tom cause I didn't like how jmz's only had around 56mb free. Is there any way to get more than 56 or is that cause all of the stuff on the rom?
Related
Yo,
Big thanks to XDA!
The short version.I'm in Alaska, we won't get froyo working correctly on our network up here for a while........Right now I'm running a CDMA Unrevoked 2.1 rom and the phone does everything I need except app2sd. I've done allot of hunting with no conclusive answers to my following question.
Can I push my apps the sd card on the unmodified CDMA unrevoked rom.(try saying that 10 times fast...)I have partitioned the sd with clockwork (rom manger) but have not been able to find a way to push apps to the sd with an unmodified unrevoked rom.I may be missing the most obvoius answer but I'm asking anyway......
I know this will be asked.Why not run a custom rom?
I have run a few modded roms, but I have issues with them on our network up here. Not the roms fault,so I'm working with what we have. The best (no bugs) rom I've run up here, is the unrevoked 2.1 cdma rom.
If app2sd cannot be done on the stock 2.1 unrevoked rom I can accept that and wait.I just need confirmation for the masters.
Any help is appreciated!
THanks,
Nick
If your using a rooted stock sense rom just flash this boot to get app2sd to work on your phone.
http://forum.xda-developers.com/showthread.php?t=790864
Its for cellsouth but works with ACS according to the post and it worked fine on my GCI/Digitel phone as well.
I just used Darktremor's apps2sd. Make sure and move the Dalvik Cache too as you will still run out of space on the desire.
Here are the commands for apps2sd
http://forum.xda-developers.com/showpost.php?p=7021609&postcount=5
Awesome! I downloaded both files and installed as recommended. I already had the SD partition using Rom manager so I only had to flash from the SD. Looks like its working so far.
Thanks!
Nick
Sent from my PB99400 using XDA App
Yo!
So to give an update and a hint if others on ACS are setting this up. If I move that dalvic cache to SD the phone is dropping the network. Phone and internet. I moved dalvic cache back to internal and all is well. It may be due to a new topram 32g SD card I installed at the same time as app2sd , but I'm okay with the compromise on internal space given the phone is not glitchy at all now. Figured I would give a heads up to anyone up here.
Nick
Sent from my PB99400 using XDA App
I've been trying to get boot manager to work and so far no luck. Eerytime I install a rom it gets stuck at the ssplash screen. Sometimes it will freeze myy phone up when it's installing. The roms I been trying to install in the additional slots are Miui and pool party. It does ask something before install about either installing ext2 or ext4. Can someone explain what that is and how I can find out what my current rom ext is? I'm running SkyRaider1.1
Does it not say in the roms description? It usually does, a lot of the new roms are going to ext4, its basically just a different format for your SD card, ext4 is supposedly faster, I would try visiting skyraiders website to see, o, and I read that if the other roms you were trying to install to boot with this are ext4 roms, they will not work, this was only like 2 days ago I read that so unless they have fixed it since then that may be your problem also...
Sent from my ADR6350 using XDA App
bluedegeon said:
I've been trying to get boot manager to work and so far no luck. Eerytime I install a rom it gets stuck at the ssplash screen. Sometimes it will freeze myy phone up when it's installing. The roms I been trying to install in the additional slots are Miui and pool party. It does ask something before install about either installing ext2 or ext4. Can someone explain what that is and how I can find out what my current rom ext is? I'm running SkyRaider1.1
Click to expand...
Click to collapse
it doesnt matter the rom runs off the sdcard. the .img files it creates are each partition for the rom, it asks you what filesystem you want to use for those img files.
Sent from my Incredible 2 using XDA App
No I looked like 10x. Does not say what file extension it is on SkyRaider website. I talked to a dev. and he said the app isn't connecting to the servers and if I tried connecting using data not wifi which I have been and no luck. I'm just going to get a refund
I would listen to guy above me, he's pretty knowledge, but like I said, regardless of that issue, I red under comments on market, if the roms you are trying to use run ext4 they won't work for some reason, I don't know why, just what a lot of people said, it kept me from buying it cause I wanted to try it.
Sent from my ADR6350 using XDA App
I love my boot manager. I always install as ext2 and don't have problem. I'm running CM7 beta as my main phone rom, with Magnolia, MIUI, Carbonite and GingerBangVanilla in the other slots. So much win.
Anyway you can always copy past the bootmanagers log.txt into an email and send it to [email protected] and they'll be more than happy to help.
chattguy said:
I love my boot manager. I always install as ext2 and don't have problem. I'm running CM7 beta as my main phone rom, with Magnolia, MIUI, Carbonite and GingerBangVanilla in the other slots. So much win.
Anyway you can always copy past the bootmanagers log.txt into an email and send it to [email protected] and they'll be more than happy to help.
Click to expand...
Click to collapse
Yeah I've already done that. They told me my app was connecting to servers to install necessary files in order for it to work properly. They told me to open the app using data while wifi disconnected which I always do anyways. I don't use wifi unless im downloading huge files. I told them i tried it and nothing seem to work, Haven't heard from them ever since. If i install as ext 2 it will install but when i want to select rom 1 it will get stuck at splash screen. If i install ext 4, it freezes my phone
bluedegeon said:
Yeah I've already done that. They told me my app was connecting to servers to install necessary files in order for it to work properly. They told me to open the app using data while wifi disconnected which I always do anyways. I don't use wifi unless im downloading huge files. I told them i tried it and nothing seem to work, Haven't heard from them ever since. If i install as ext 2 it will install but when i want to select rom 1 it will get stuck at splash screen. If i install ext 4, it freezes my phone
Click to expand...
Click to collapse
flash skyraider, open terminal emulator or use adb shell, type mount, look for ext4 in the output.
Sent from my Incredible 2 using XDA App
times_infinity said:
flash skyraider, open terminal emulator or use adb shell, type mount, look for ext4 in the output.
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
Didn't find ext4. I see ext3 in some parts though. Weird.. If my rom is ext3 and it only gives me the option to install as ext 2 or 4. Look at my screen shot in OP to see what ik talking about.
I've been playing with boot manager and have found it a bit buggy as well. I was able to install Miui and stock GingerSense, but both Pool Party and OMFGB boot loop.
I'm not complaining though, I'm amazed it works at all considering what it's doing. I'll happily wait for it to be further refined, and I'm happy to support an app like this.
I think I may have found the problem. Correct me if i'm wrong. I'm running skyraider and the file system is ext3. I need ext4 installed on the main rom for boot manager to work? I tried converting it to ext4 but wouldn't boot so i converted it back to ext3 via EXT4 recovery
Hello there Dudes!
First i want to send you my compliments for your GREAT and helpfull sites/ forum about all rootings & stuff
A past few Days i had such no idea about rooting etc. You helped me sooo much, i just want to say thank you...
And NOW?!?!
I'm coming from FROYO_2.2.2 with 5.11.xx now i have the OFFICIAL GB 2.3.3 with 5.17.xx
I HAVE ROOT! I HAVE S-OFF!
I have a new Hboot and CWM flashed!!!
Everything works fine.
But I still have problems with the internal Memory. A few aps and im out of space This is why i now had part my sd with des RomManager Tool. 512 to ext and 256 to cache.
But the Stock-Install don't mount the ext.part.
Now i have read, i had to do it BEVORE install ROM. Right? Not a big Problem, but i want to stay Stock as possible. So this ROM seems to be perfekt.
It shouldn't be any problem with GSM/HSDPA/EDGE and all the european NetworkStuff?!?
By the way: Provider is O2 (but i think it doesn't matter)
BUT:
Now I have a little problem to download the file from mirror placed in the entry-post. Is it a fault of my network or did you move the files to another server?
Can you give me an alternate adress?
I can't post in the developer forms.
THX a LOT
PS: Just another little Q i didn't find an answer:
Must a system be installed on the device, to flash a new ROM with an RUU executive? Or will it work too if the Desire in Bootmenu, only?
Hi,
I Didn't need to activate a2sd before installing rom.
I use Cyanogenmod, but i thing it should work on stock rom too.
Search for “darktremor“.
Sent from my HTC Desire using XDA App
And you need only the recovery to flash a rom.
Sent from my HTC Desire using XDA App
Have you installed a2sd addon from Teppic's thread?
SwiftKeyed from my HTC Desire using Tapatalk.
No, I hadn't install the ap2sd from teppic yet, because the downlink seems to be broken too.
But, it doesn't matter. I want to wipe my phone, because of other (i hope) software errors I had on phone since a long time.
For example the international storage have after install the GB update from 2.2 to 2.3 only ~110 to 120 MB free. This can't be right, can it?
So, now I want to try to do a new installation with min 3 wipes/ factory reset before.
This is why the question is: can I install a RUU file over USB, when there is not longer a system on phone? I think I have to make it from Cmw-Recovery with an zip?
So, my greatest wish is. Please give me a funktional downlink to the system of teppic!
Thanks so far!
Edit: now I realized the post from conch
UPDATE:
Plugged in a new 8GB µSD (C4) and partition it with CWM-Recovery to 1024MB ext and 256MB Swap.
This should be enough
Now coming up a new Question. What is the ext-part now of format? ext-2/3/4? I don't have seen any option to change this in recovery? Is the AmonRa better with this? I read, there you can have a format of your choice.
So, now I only have to get the rom of teppic
EDIT: New thinking way...
1. Can the errors be solved by a damaged kernel? The ROM's dosn't inklude Kernel, does it?
How can completely change/erase the Kernel and flash a new one? Like the Same as flash an ROM or Radio?
2. When i flash an lower ROM (2.1/2.2) coming from a newer/higher (like 2.3.3 with Radio_5.17.xx) do i have to change the Radio too? Maybe for an 2.2 the 5.11.xx? Or will 2.2.x & 2.1 also work with an higher Radio (like 5.17.xx)
Thanks a lot!
InterstatesDesire said:
Plugged in a new 8GB µSD (C4) and partition it with CWM-Recovery to 1024MB ext and 256MB Swap.
This should be enough
Click to expand...
Click to collapse
This swap is 256MB of wasted precious space.
InterstatesDesire said:
Now coming up a new Question. What is the ext-part now of format? ext-2/3/4? I don't have seen any option to change this in recovery? Is the AmonRa better with this? I read, there you can have a format of your choice.
Click to expand...
Click to collapse
CWM formats to ext3.
InterstatesDesire said:
The ROM's dosn't inklude Kernel, does it?
Click to expand...
Click to collapse
How do you expect a rom to work without one?
InterstatesDesire said:
2. When i flash an lower ROM (2.1/2.2) coming from a newer/higher (like 2.3.3 with Radio_5.17.xx) do i have to change the Radio too? Maybe for an 2.2 the 5.11.xx? Or will 2.2.x & 2.1 also work with an higher Radio (like 5.17.xx)
Click to expand...
Click to collapse
They will work.
erklat said:
This swap is 256MB of wasted precious space.
Click to expand...
Click to collapse
You think so? I've read somewhere that its used for dalvic-cache?! When it realy makes no sense, how can I remove it? By formatting the SD new? Or can I manage the partitions with a windows tool?
CWM formats to ex3
Click to expand...
Click to collapse
Thanks. That will work good for me.
How do you expect a rom to work without one?
Click to expand...
Click to collapse
Even somewhere here, I thought, I read about the ROM only a UI and a collection of different applications, mods and stuff.
InterstatesDesire said:
You think so? I've read somewhere that its used for dalvic-cache?! When it realy makes no sense, how can I remove it? By formatting the SD new? Or can I manage the partitions with a windows tool?
Click to expand...
Click to collapse
I think it is for the best you do it from the scratch. Extending partitions rarely gives desired results IMHO.
SwiftKeyed from my HTC Desire using Tapatalk.
erklat said:
I think it is for the best you do it from the scratch. Extending partitions rarely gives desired results IMHO.
SwiftKeyed from my HTC Desire using Tapatalk.
Click to expand...
Click to collapse
So far, so good...
I had now installed the Stock GB Rom. From the official developer update RUU.
A few wipes, before install, seems to be cleaned my system. No I have ~125MB free space on phone!
I installed the CWMR 5.0 again and also the SU 3.x from teppic. Everything looks fine and working.
Just again the same little problem that the diskspace for my apps will be totaly full soon... What did the think about this little storage??? Arrrgglll!
Before installing ROM i changed the partition on SD to 1024MB ext-3 without swap.
And noew I have installed the ap2sd from teppic74 too. In recovery, everything looks fine. The install-procedure runs to end and show no errors.
But I still have 125MB and can't find any ap2sd app or something
Do i have to mount the ext-3 in any way, or did I miss something other?
Best regards and many thanks to all the people answered me! And not much less all the people who created this forum!
1) a2sd is not an app but a script. Besides ls I don't think there is a way except observing how your /data partition behaves. Frankly, I think adb is little over your head now. If not, search Droidzone's guide.
2) exactly what are you doing? You have a ruu installed now and you flash a2sd over it, or you installed Teppic's ROM?
SwiftKeyed from my HTC Desire using Tapatalk.
Exactly I installed the developer RUU. Then flash it over adb with the ClockworkMod-Recovery and than install the v3.x SU from teppic with flashing from CWMR. Make new boot to check if SU works. Seems to be fine.
Then installed the ap2sd, from teppic, again with CWMR. Looks fine. But I don't think it was success. Because I've seen a screenshot in another thread, from an HTC desire, where you can see, the phone storage is more than 1GB. But I don't find this post again:/
Now I go on, first install the "Rom Manager".
So pls my friends tell me what I did wrong. Because the great internal storage with ap2sd+ was the main reason to make my phone root.
InterstatesDesire said:
Exactly I installed the developer RUU. Then flash it over adb with the ClockworkMod-Recovery and than install the v3.x SU from teppic with flashing from CWMR. Make new boot to check if SU works. Seems to be fine.
Then installed the ap2sd, from teppic, again with CWMR. Looks fine. But I don't think it was success. Because I've seen a screenshot in another thread, from an HTC desire, where you can see, the phone storage is more than 1GB. But I don't find this post again:/
Now I go on, first install the "Rom Manager".
So pls my friends tell me what I did wrong. Because the great internal storage with ap2sd+ was the main reason to make my phone root.
Click to expand...
Click to collapse
A2sd+ doesn't change the reported internal memory. That screen shot is from something else. I have a root memory faq in my signature which will explain how it works
Sent from my HTC Desire using Tapatalk
Evening all, have a bit of a prob with my WFS. I have it unlocked with S-ON and have re-ROM'd several times. I have a 16GB class 4 card in with 2GB FAT32 partition and Link2SD.
Tried MIUIv4-marvel-2.4.2 the other day, looked nice, worked like a charm but no radio at all, no calls or texts so went back to a prev build, kept bootlooping, tried another then another.
I now have JxMatteo V1.2 Sense 3.5 running ok, however I now cannot download or install any apps, either download from market or install from SD card, the progress bar shows progressing for a bit, then freezes and phone reboots.
Anyone have any info on this, can it be fixed?
I cannot install ROM Manager, but I can get into bootloader for recovery and ROM install ok.
**************************************
update: it may be something to do with the SD card or my partioning, without the card installed it seems to work just fine... however now I cannot read the card in Windows... *sigh*
**************************************
Cheers all.....
Weird, but if you like it i can post a backup of cm9, stable enough for daily use!
Sent from my Wildfire S A510e using xda premium
Sure, thanks, I'll try it!
aaronpnz said:
Sure, thanks, I'll try it!
Click to expand...
Click to collapse
Tomorrow the link, ok?
Sent from my Wildfire S A510e using xda premium
Or you can download a fresh one from the thread in the dev section, better than using someone's backup.
-----------
"You can overclock as much as you want, your phone will always seem too slow."
hey,
I dont the reason but any ext4 partition above 1gb does not seem to work on ICS (atleast for me). On ICS download s2e from the market, open the app and go to settings and check mount as ext4 and set read buffer, reboot the phone and then move all the caches to sd card, reboot again and u have 1GB memory. . hope i helped.
Hello everyone,
This is my first post and my first time rooting and flashing an Android phone. I decided to start with a Sprint HTC Evo 4G because it's an older phone and no longer my primary one.
I extensively browsed the forums and many threads to try and piece together what was needed to accomplish the task.
I ended up following this guide pretty much to the T:
http://forum.xda-developers.com/showthread.php?t=1473373
My HBoot is 2.18, I had a stock Kernel and Stock OS before I attempted anything.
I unlocked the boot loader and then added the AmonRa Recovery.
I could not proceed past step 27 in the tutorial to achieve S-OFF, because the files attached don't seem to exist anymore.
Can someone please post a mirror? Is S-OFF even really necessary? I've read conflicting reports.
In any case, I was able to wipe everything and try out a few roms with mixed success.
Superuser and busybox both confirmed I did have root (or perhaps it is a limited root because I couldn't finish S-OFF)
The Decks Reloaded .500 rom would get stuck in a boot loop, couldn't figure out why.
The Jellybread rom would also get stuck in a boot loop with the "X" animation window.
The third rom I tried managed to work and it was the Thundershock one. But the rom seems to eat battery life and the over-all performance is laggy.
I think it's an issue with the process I did rather than the rom. Maybe I need a newer Kernel?
Could anyone please chime in and perhaps walk me through what I should do next?
Take a look at the thread in the link below. I used it not too long ago to root and S-off two EVO's. S-off isn't a total necessity on this device but it allows you to do things like update your radios (if you have the latest firmware then this is less of an issue). You can flash ROM's and custom kernels without any issue while S-on. Also, keep in mind that S-off and root are two different things altogether, therefore, S-off doesn't mean "full root" (if you want a better explanation, click the top link in my sig and read the section regarding S-off vs. Root. The guide is for the EVO LTE, but the definition of root and S-off is the same). As for issues with installing certain ROM's, check and make sure you got a good download, and you should be using a Amon_Ra based recovery, not ClockWorkMod. This could be part of your issue, as CWM is known for not wiping properly, which could cause issues when flashing.
Root & S-off Hboot 2.18
Sent from my HTC EVO 4G LTE
Thanks!
FinZ28, thank you for taking the time to respond. I made sure I used the Amon_Ra based recovery as that's what the various threads all recommended. I will look into the fact that maybe I received bad data in regards to the two earlier ROMs I tried out.
I know that both of them resulted in a boot loop, even though I did flash as per instructions and made sure to partition my SD card and use ext4.
On that note, they mention always setting swap to 0 and the partition size to 1024.
But, my SD card is only 1GB so 1024.
In order for the SD partition to work and the Amon_Ra recovery to update the file system format, I had to put 0 to swap, 512mb for the partition, and the other 512 "for the rest."
Then I was able to partition and update the file system format from ext2 > ext3 > ext4
Is this the right way to do it? How would you partition a 1GB SD card for certain ROMs that require it?
My first suggestion is to get a larger sdcard. 1 gig is tiny. Although the 512/512 setup you have should be fine for anything needing partitioned sdcard.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Also when you say a bootloop there might be a different thing going on. Depending on the ROM you are using it might have a2sd baked in. For those Roms they boot(loop) two to three times to set everything up. So have you let it loop more than three times?
My evo also gets stuck in bootloop when I try to install the latest thundershock 3.03 rom and can't figure it out
Sent from my PC36100 using xda app-developers app
mdasilva2013 said:
FinZ28, thank you for taking the time to respond. I made sure I used the Amon_Ra based recovery as that's what the various threads all recommended. I will look into the fact that maybe I received bad data in regards to the two earlier ROMs I tried out.
I know that both of them resulted in a boot loop, even though I did flash as per instructions and made sure to partition my SD card and use ext4.
On that note, they mention always setting swap to 0 and the partition size to 1024.
But, my SD card is only 1GB so 1024.
In order for the SD partition to work and the Amon_Ra recovery to update the file system format, I had to put 0 to swap, 512mb for the partition, and the other 512 "for the rest."
Then I was able to partition and update the file system format from ext2 > ext3 > ext4
Is this the right way to do it? How would you partition a 1GB SD card for certain ROMs that require it?
Click to expand...
Click to collapse
Glad to be of help. Hopefully you can get your issues resolved.
InSaNeO1488 said:
My evo also gets stuck in bootloop when I try to install the latest thundershock 3.03 rom and can't figure it out
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
Try a fresh download, a full wipe in recovery, and try again. Also see the post above yours regarding A2SD, and make sure you don't have an issue there.
Sent from my HTC EVO 4G LTE
InSaNeO1488 said:
My evo also gets stuck in bootloop when I try to install the latest thundershock 3.03 rom and can't figure it out
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
jlmancuso said:
My first suggestion is to get a larger sdcard. 1 gig is tiny. Although the 512/512 setup you have should be fine for anything needing partitioned sdcard.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Also when you say a bootloop there might be a different thing going on. Depending on the ROM you are using it might have a2sd baked in. For those Roms they boot(loop) two to three times to set everything up. So have you let it loop more than three times?
Click to expand...
Click to collapse
I've let it sit for over 30 minutes, and it just sits there frozen. It doesn't reboot on its own or do anything.
FinZ28
Try a fresh download, a full wipe in recovery, and try again. Also see the post above yours regarding A2SD, and make sure you don't have an issue there.
Click to expand...
Click to collapse
How can I trouble shoot if my issue is in A2SD??
I'm going to try a larger SD card soon and report back.
mdasilva2013 said:
I've let it sit for over 30 minutes, and it just sits there frozen. It doesn't reboot on its own or do anything.
FinZ28
How can I trouble shoot if my issue is in A2SD??
I'm going to try a larger SD card soon and report back.
Click to expand...
Click to collapse
Look at the OP for whatever ROM you're flashing. See if there is any mention of A2SD, and if so, make sure you have your phone & SD card set up properly.
Sent from my HTC EVO 4G LTE
Wipe!
Like the others have said... Wipe.... wipe....wipe! The AmmonRA recovery does not come with a super duper wipe setting so you may want to download
A nice example can be found here:
http://www.android-hilfe.de/root-ha...pe-wipe-zip-dhd-unterstuetzung-fuer-ext4.html
That tends to take care of most of the bootloops I have experienced...