after flashing a lot of roms i decided to go back to the stock android 2.3.6 rom. of course i kept the root. Now i got a few questions:
1 set cpu control dont let me overclock higher then 800mhz. Why is that? Normally i could overclock untill 1.2 ghz.
2 Can i just flash a kernel? And if, could somebody give me the best kernel + link.
Thnx
Sent from my GT-S5660 using xda app-developers app
1) you need a kernel with overclock support.
2) you need a kernel for stock rom so not cm based.
This is a stock ROM with oc support and root.
http://forum.xda-developers.com/showthread.php?t=2179895
Kernel from Farzad u235
http://forum.xda-developers.com/showthread.php?t=1857846
There are also stock kernels from Phiexz and Delanoister but I don't have them on pc.
Related
Heya,
I just installed this new rom (Android Revolution HD 5.1.0) and on that post it says that if u install setcpu u can clock it to 1200 mghz or something. I tried it and I also tried to perflock it but it said it didnt work and I had to mail the developer.
Anyone has an idea how Im able to overclock it? its the gingerbread version btw.
Thx in advance!
New kernel has yet to come for this base, so have patience, it will come soon i think
Sent from my Desire HD using XDA App
^ Use the 3.7 ROM if you really want to overclock.
It's also more stable and optimized.
Also the radio for 5.x.x is horrible :S I can hardly get any WIFI signal now.
nerotix said:
Heya,
I just installed this new rom (Android Revolution HD 5.1.0) and on that post it says that if u install setcpu u can clock it to 1200 mghz or something. I tried it and I also tried to perflock it but it said it didnt work and I had to mail the developer.
Anyone has an idea how Im able to overclock it? its the gingerbread version btw.
Thx in advance!
Click to expand...
Click to collapse
MDJ has made an OC kernel you can flash through CWM.
http://forum.xda-developers.com/showthread.php?t=1050106
apoorvajsh said:
MDJ has made an OC kernel you can flash through CWM.
http://forum.xda-developers.com/showthread.php?t=1050106
Click to expand...
Click to collapse
this kernal works with all GB roms with sense dont people read its been updated about 10 times since release,
Install MDJ kernel to over clock GB rom.
I have with the official 2.2.1 Froyo HTC Wildfire. Done with the s-off the alpharev, done root and put clockworkmod 3.0.0.6
I am interested can OC the CPU, not to change my rom.
Thanks
Sorry my English is bad
Not possible without changing to kernel that allows overclocking.
Thank you for your response, I thought it could be replaced by a kernel
No, you dont have to change rom, just flash another kernel...
Custom kernel list here:
http://forum.xda-developers.com/showthread.php?t=1029318
You can look at nFinity MC4 (First link in the Custom Kernel list). Flash it, and you will be able to OC the stock ROM.
Flash I nFinity MC4 and install set cpu 480(min) and 691(max), works great on stock rom
Thanks
Is there a stable Kernel for the stock 2.3.5 ROM? I want to overclock my Wildfire S but I want to be stable. Because before flashing 2.3.5 I tried to put custom Kernel for 2.3.3 from here but when I overclocked it, it freezes on screens and I need to pull out the battery. So is there stable custom Kernel for 2.3.5 stock ROM?
Maybe your CPU couldn't handle the overclock.
Each yield of processors are different some better than others especially when overclocking.
I had stock rom 2.3.3 with overclock kernel and I was running at 806mhz no problems.
Wait for a overclock kernel, theres none available yet, then try it.
How can I get my stock kernel back? Or does flashing a ROM change the kernel? I don't really understand kernels yet in terms of compatibility, and such. I just don't want to brick my phone, so I'm making sure I do it right.
Roms usually involve a kernel already built in, check the OP description.
For example if you are on cm10 and flash the ktoonsez aosp kernel, then later flash a nightlie build, the kernel will be overwritten with the one built in cm10. You have to reflash the ktoonsez again afterwards if you want to use it.
So if you want stock kernel, flash a stock ROM with built in stock kernel.
Sent from my SPH-L710 using xda app-developers app
Make sure the kernel you flash is sourced from the same source as your ROM, ie any TouchWiz LG8 ROM needs to have an LG8-sourced kernel - custom or stock.
Samsung Galaxy S3
OdexedBlue ROM
Trinity Kernel
XDA Premium - Support our developers!
Hello people , I rooted my desire 2.3.3 official with Superuser , but when I have opened No frills cpu , minimum cpu what can I select was 128 mhz and maximum 980 mhz ...I mean there must be a 1190 mhz but its missing , please help
What did u use to root? HTC Desire?
Maximum MHz is 1113..
Try installing Rom Toolbox and check there.
It's probably your kernel. There's CronMod kernel for Gingerbread, try that. Using it w/ CyanogenMod 7.2 and I get 1220MHz Overclock.
Some kernels doesn't allow overclock at all ( Like sense ones ).
Edit:
CronMod ( Rom w/ Kernel )
Download it below in main post. ( Under CronMod Kernel )
Don't flash it on Sense rom. If you want your Sense roms, then take a look at Development section and flash a sense rom.
They are most likely to be better than official roms, because of features like A2SD or INT2EXT and extended overclocking capabilities.
SaySayonara said:
What did u use to root? HTC Desire?
Maximum MHz is 1113..
Try installing Rom Toolbox and check there.
Click to expand...
Click to collapse
Hello ive used Revolutionary ..Did you mean , when I change Rom overclock will work?
EvilShadeZ said:
It's probably your kernel. There's CronMod kernel for Gingerbread, try that. Using it w/ CyanogenMod 7.2 and I get 1220MHz Overclock.
Some kernels doesn't allow overclock at all ( Like sense ones ).
Edit:
CronMod ( Rom w/ Kernel )
Download it below in main post. ( Under CronMod Kernel )
Don't flash it on Sense rom. If you want your Sense roms, then take a look at Development section and flash a sense rom.
They are most likely to be better than official roms, because of features like A2SD or INT2EXT and extended overclocking capabilities.
Click to expand...
Click to collapse
Maximum 998 , minimum 245 , please help how to go on 1113
markedoodlenup said:
Maximum 998 , minimum 245 , please help how to go on 1113
Click to expand...
Click to collapse
Did you flash a custom Sense / rom or a custom kernel? I meantioned that a post before.
As I said, you kernel might be restricting the overclock.
Edit:
Now I am using Evervolv Kitkat 26.12.13 nightly, It's great, got 1113 OC with it, A little bit less than with cronmod, but still good speed.
Really, Don't stay with stock sense, since you can't do much with it, If you want sense there's plenty of roms in Development section, w/ kernel optimisations and larger overclocks ( sounds kinky) .
If you don't know how to flash a custom rom / kernel ( w/ recovery ) then you should check tutorials of doing that.
My config;
- CM7r2 hboot
- 4EXT Recovery
- 2GB ext4 partition
- 32GB Sandisk Extreme Class 10 card
- CM 7.2.0.1 - rom altered by me with 7Zip and UOT Kitchen
- Go Launcher EX
markedoodlenup said:
Hello ive used Revolutionary ..Did you mean , when I change Rom overclock will work?
Click to expand...
Click to collapse
Like EviLShadeZ says; it depends on the ROM, and the kernel.. Rooting ur phone, does not automatically mean wild OC'ing..
Besides, most (if not all..?!) CyanogenMod ROMS have built-in CPU control, so u wont need NO frills CPU, or whatever..
- H