[Q] HTC Desire Bugged Overclock. Help please :( - Desire Q&A, Help & Troubleshooting

Hello people , I rooted my desire 2.3.3 official with Superuser , but when I have opened No frills cpu , minimum cpu what can I select was 128 mhz and maximum 980 mhz ...I mean there must be a 1190 mhz but its missing , please help

What did u use to root? HTC Desire?
Maximum MHz is 1113..
Try installing Rom Toolbox and check there.

It's probably your kernel. There's CronMod kernel for Gingerbread, try that. Using it w/ CyanogenMod 7.2 and I get 1220MHz Overclock.
Some kernels doesn't allow overclock at all ( Like sense ones ).
Edit:
CronMod ( Rom w/ Kernel )
Download it below in main post. ( Under CronMod Kernel )
Don't flash it on Sense rom. If you want your Sense roms, then take a look at Development section and flash a sense rom.
They are most likely to be better than official roms, because of features like A2SD or INT2EXT and extended overclocking capabilities.

SaySayonara said:
What did u use to root? HTC Desire?
Maximum MHz is 1113..
Try installing Rom Toolbox and check there.
Click to expand...
Click to collapse
Hello ive used Revolutionary ..Did you mean , when I change Rom overclock will work?

EvilShadeZ said:
It's probably your kernel. There's CronMod kernel for Gingerbread, try that. Using it w/ CyanogenMod 7.2 and I get 1220MHz Overclock.
Some kernels doesn't allow overclock at all ( Like sense ones ).
Edit:
CronMod ( Rom w/ Kernel )
Download it below in main post. ( Under CronMod Kernel )
Don't flash it on Sense rom. If you want your Sense roms, then take a look at Development section and flash a sense rom.
They are most likely to be better than official roms, because of features like A2SD or INT2EXT and extended overclocking capabilities.
Click to expand...
Click to collapse
Maximum 998 , minimum 245 , please help how to go on 1113

markedoodlenup said:
Maximum 998 , minimum 245 , please help how to go on 1113
Click to expand...
Click to collapse
Did you flash a custom Sense / rom or a custom kernel? I meantioned that a post before.
As I said, you kernel might be restricting the overclock.
Edit:
Now I am using Evervolv Kitkat 26.12.13 nightly, It's great, got 1113 OC with it, A little bit less than with cronmod, but still good speed.
Really, Don't stay with stock sense, since you can't do much with it, If you want sense there's plenty of roms in Development section, w/ kernel optimisations and larger overclocks ( sounds kinky) .
If you don't know how to flash a custom rom / kernel ( w/ recovery ) then you should check tutorials of doing that.

My config;
- CM7r2 hboot
- 4EXT Recovery
- 2GB ext4 partition
- 32GB Sandisk Extreme Class 10 card
- CM 7.2.0.1 - rom altered by me with 7Zip and UOT Kitchen
- Go Launcher EX

markedoodlenup said:
Hello ive used Revolutionary ..Did you mean , when I change Rom overclock will work?
Click to expand...
Click to collapse
Like EviLShadeZ says; it depends on the ROM, and the kernel.. Rooting ur phone, does not automatically mean wild OC'ing..
Besides, most (if not all..?!) CyanogenMod ROMS have built-in CPU control, so u wont need NO frills CPU, or whatever..
- H

Related

[Q]Android Revolution HD 5.1.0 CPU Overclocking

Heya,
I just installed this new rom (Android Revolution HD 5.1.0) and on that post it says that if u install setcpu u can clock it to 1200 mghz or something. I tried it and I also tried to perflock it but it said it didnt work and I had to mail the developer.
Anyone has an idea how Im able to overclock it? its the gingerbread version btw.
Thx in advance!
New kernel has yet to come for this base, so have patience, it will come soon i think
Sent from my Desire HD using XDA App
^ Use the 3.7 ROM if you really want to overclock.
It's also more stable and optimized.
Also the radio for 5.x.x is horrible :S I can hardly get any WIFI signal now.
nerotix said:
Heya,
I just installed this new rom (Android Revolution HD 5.1.0) and on that post it says that if u install setcpu u can clock it to 1200 mghz or something. I tried it and I also tried to perflock it but it said it didnt work and I had to mail the developer.
Anyone has an idea how Im able to overclock it? its the gingerbread version btw.
Thx in advance!
Click to expand...
Click to collapse
MDJ has made an OC kernel you can flash through CWM.
http://forum.xda-developers.com/showthread.php?t=1050106
apoorvajsh said:
MDJ has made an OC kernel you can flash through CWM.
http://forum.xda-developers.com/showthread.php?t=1050106
Click to expand...
Click to collapse
this kernal works with all GB roms with sense dont people read its been updated about 10 times since release,
Install MDJ kernel to over clock GB rom.

(Q) Overclock official 2.2.1 Froyo

I have with the official 2.2.1 Froyo HTC Wildfire. Done with the s-off the alpharev, done root and put clockworkmod 3.0.0.6
I am interested can OC the CPU, not to change my rom.
Thanks
Sorry my English is bad
Not possible without changing to kernel that allows overclocking.
Thank you for your response, I thought it could be replaced by a kernel
No, you dont have to change rom, just flash another kernel...
Custom kernel list here:
http://forum.xda-developers.com/showthread.php?t=1029318
You can look at nFinity MC4 (First link in the Custom Kernel list). Flash it, and you will be able to OC the stock ROM.
Flash I nFinity MC4 and install set cpu 480(min) and 691(max), works great on stock rom
Thanks

[Q] Kernel for overclock

Is there a stable Kernel for the stock 2.3.5 ROM? I want to overclock my Wildfire S but I want to be stable. Because before flashing 2.3.5 I tried to put custom Kernel for 2.3.3 from here but when I overclocked it, it freezes on screens and I need to pull out the battery. So is there stable custom Kernel for 2.3.5 stock ROM?
Maybe your CPU couldn't handle the overclock.
Each yield of processors are different some better than others especially when overclocking.
I had stock rom 2.3.3 with overclock kernel and I was running at 806mhz no problems.
Wait for a overclock kernel, theres none available yet, then try it.

Modify Virtuous Unity or Sense to use kernel only (or some features)

Hi guys,
I really long try to find a good (and working!!!) OC/UV kernel for my desire z.
Now i tried Viruous Unity and Sense, but there is too much bloat in my opinion.
Now i really want to use that kernel only with its oc and uv features to save battery and gets the device a bit faster.
The unity mod is too big and fills up my intern memory that i get at least 50MB memory free...
Thats a real problem.
Can anyone help me to solve this? To help me to modify the virtuous mod?
With pershoot it will not boot or after boot system will not respond and the phone sticks.
I running HTC stock rom 2.30... With eng-hboot full s-off permroot. If questions needed ask..
Hope for answers. Thanks a lot
Sent from my HTC Vision using XDA
Before everyone shows up with their pitchforks, I'm going to try to help you.
1. HTC Sense ROMs only with with "Sense" kernels (e.g. Unity, Virtuous, RCMiX)
2. AOSP kernels will not work properly with Sense based ROMs (e.g Pershoot, CM, Tiamat, ILWT)
3. Pretty much *Any* ROM is compatible with the Virtuous OC Daemon, or Tsubus' ILWT OC Daemon.
4. OC/UV Beater isn't the overclocking daemon, it's simply used to CONFIGURE and CONTROL the OC daemon.
Based on what I *think* you're trying to say you need, you should stick with Virtuous Vision 2.0, but try using it with an alternative launcher (like LauncherPro or Go Launcher) which will improve your experience (the default Sense launcher "Rosie" is pretty heavy). You may also try heading over to tsubus' ILWT thread, and find the link for his "ILWT OC Daemon". Install it, and you may notice a difference.
If you're looking for speed, use an AOSP ROM (CM7, ILWT, Glite, MIUI) and stay as far away as possible from Sense 3.x ROMs. Hope that helps.
Also, wrong section brah.
Ok in other words: as long as i do not flash a custom rom i cant use oc/uv.
But if i don't like the custom roms there is no chance.
Or is there any AOSP Rom available which looks like the stock rom with Sense 2.x?
Because all the roms looks like the samsung layout.

New kernel

after flashing a lot of roms i decided to go back to the stock android 2.3.6 rom. of course i kept the root. Now i got a few questions:
1 set cpu control dont let me overclock higher then 800mhz. Why is that? Normally i could overclock untill 1.2 ghz.
2 Can i just flash a kernel? And if, could somebody give me the best kernel + link.
Thnx
Sent from my GT-S5660 using xda app-developers app
1) you need a kernel with overclock support.
2) you need a kernel for stock rom so not cm based.
This is a stock ROM with oc support and root.
http://forum.xda-developers.com/showthread.php?t=2179895
Kernel from Farzad u235
http://forum.xda-developers.com/showthread.php?t=1857846
There are also stock kernels from Phiexz and Delanoister but I don't have them on pc.

Categories

Resources