I was using the official 4.04 and could not get my samsung MHL adapter to work. Then i tried Task's latest 4.22 AOKP and still nothing.
When i was on 4.04 my phone did say that the hdmi cable was attached but thats it I would like to get this working. Any help appreciated :good:
is there any reason why you havent tried it on stock jelly bean (4.1.1 or 4.1.2)?
MHL hasn't worked for me with CM or Task's since the 3.4 kernel update. The last Task ROM to work for me was 3.14. You could try flashing that one. Also try rebooting your phone while it's fully hooked up to your adapter. Try using a ROM that isn't using the 3.4 kernel.
xBeerdroiDx said:
is there any reason why you havent tried it on stock jelly bean (4.1.1 or 4.1.2)?
Click to expand...
Click to collapse
Is there a 4.1.1 that i can flash with cwm? Im with bell if that matters. Thx
Related
Hey,
I am just not getting a suitable or profitable answer about OTG on gnex with 4.2.1 working or not.?
Also which previous ver of Android does it support.?
Anyone having any news about it please share.
Thanks
Go read the last page in the air kernel thread in the GSM section. They are saying it is working
namtombout said:
Go read the last page in the air kernel thread in the GSM section. They are saying it is working
Click to expand...
Click to collapse
Will try Air Kernel and report back tomorrow. Im also suspecting on port of my gn coz some time it detected when i slightly move the cable through Stick Mount but does'nt give me any notification in notification bar. I also change the OTG cable but nothing. Currently i am using AOKP mr1 build 2 with its stock kernel(lean).
That's nice. no need to report back
Just found that its working with Xylon 18 with its stock kernel but still not detecting mouse dono why?
OTG works with any stock kernel of the GalNex. It finds MassStorageDevices fine and works great with keyboards and mice. The only issue is it doesn't mount the MassStorageDevices. If you're rooted enough to get a custom kernel you're rooted enough to take 5 seconds and mount the device yourself. Still no mounting in the stock 4.2.1 kernel though so you can only use MassStorageDevices with root.
sniperfox47 said:
OTG works with any stock kernel of the GalNex. It finds MassStorageDevices fine and works great with keyboards and mice. The only issue is it doesn't mount the MassStorageDevices. If you're rooted enough to get a custom kernel you're rooted enough to take 5 seconds and mount the device yourself. Still no mounting in the stock 4.2.1 kernel though so you can only use MassStorageDevices with root.
Click to expand...
Click to collapse
What exactly you wana say....
If my device is rooted on stock 4.2.1 & stock kernel then it will work or not??
Hello everyone! im new to this forum!!
Im having an issue with MHL
Basically i plug the MHL adaptor into my phone and it goes into a continuous reboot loop
It goes to the Google logo then reboot again
Anyone know what it might be. Incompatibale rom? kernal?
Do i need to flash something?
Is there a rom which it does work on.
anyway im running:
Version :4.2.1
Rom: Cyanogenmod 10.1 Nightly 20130209 maguro
Kernal: 3.0.31 -Cyanogenmod-gf5fa822
Build: cm_maguro_userdebug 4.2.1 JOP40G
THANKS IN ADVANCE
MHL works on my handset. Are you using Samsung original one?
Beamed from my CM10.1 Galaxy Nexus
Herman76 said:
MHL works on my handset. Are you using Samsung original one?
Beamed from my CM10.1 Galaxy Nexus
Click to expand...
Click to collapse
Im using one from ebay. its not original samsung but...
It does work on Stock rom which is my brothers phone. exactly the same phone, just stock
thanks for quick reply!
Just went back to stock works fine.
Im guessing that is a software issue as the hardware seems to be fine when on stock.
anybody know a ROM that its working on. and that i can try?
thanks!!:good::good::good:
iHarpZz said:
Just went back to stock works fine.
Im guessing that is a software issue as the hardware seems to be fine when on stock.
anybody know a ROM that its working on. and that i can try?
thanks!!:good::good::good:
Click to expand...
Click to collapse
Hi, I'm running CM10 ( 4.1.2 ) on my *Sprint* Gnex with NO, issues the MHL mirroring is 100% stable.
I personally haven't had much luck with 4.2.1 based Roms and MHL Mirroring.
I think PA 4.2.1 was the only one I had luck with other than the CM 10 4.1.2.
Exact Rom: Cm-10-201210110-Experimental-Toro-M2
http://download.cyanogenmod.com/get/jenkins/9855/cm-10-20121011-EXPERIMENTAL-toro-M2.zip
Hi guys, I got my glide sent over from the u.s (I'm in the u.k) a few months ago, it was already rooted for me, and as such, I'm wondering what rom and kernal I'm using?
The details I can retreive are:
Android ver 4.0.4
Baseband : I927RUXKJ5
Kernal : 3.1.10-I927UCLG9-CL970642
Build. : IMM67D
Does this give anyone any clues?
Is this the stock ota ics update from at&t?
The phone is a rojers one.
Stock kernal?
Just wondering as was thinking about flashing the litekernal, and not sure if it would work ok with the rom I am using, as this rom is very stable..
Btw cwm is installed etc..
Thanks..
James.
jmpcrx said:
Hi guys, I got my glide sent over from the u.s (I'm in the u.k) a few months ago, it was already rooted for me, and as such, I'm wondering what rom and kernal I'm using?
The details I can retreive are:
Android ver 4.0.4
Baseband : I927RUXKJ5
Kernal : 3.1.10-I927UCLG9-CL970642
Build. : IMM67D
Does this give anyone any clues?
Is this the stock ota ics update from at&t?
The phone is a rojers one.
Stock kernal?
Just wondering as was thinking about flashing the litekernal, and not sure if it would work ok with the rom I am using, as this rom is very stable..
Btw cwm is installed etc..
Thanks..
James.
Click to expand...
Click to collapse
Correct, that's the UCLG9 Samsung stock rom with stock kernel and you should have no problems installing the ICS version of litekernel.
kick buttowski said:
Correct, that's the UCLG9 Samsung stock rom with stock kernel and you should have no problems installing the ICS version of litekernel.
Click to expand...
Click to collapse
Cheers kick butt
Hey guys. So, I've been reading and reading and flashing and everything.
Got an S4. It was running 4.3 and I was having Wifi issues.
I had read it was a software issue and welp, I've always liked Cyanogen Mod so I installed that.
It installed the nightly build which was WAY too buggy (I use my camera a lot and it kept failing) edit: but the WiFi worked perfectly!
I got back to 4.2.2 now but now the WiFi is Totally not working now and i'm getting that message about
Kernel is not Seandroid enforcing
set warranty bit : kernel
and it takes forever to reboot.
Since I was on 4.3 do i need to flash that stock rom to get my stock kernel back?
Or can I install deoxed version??
I still need to put custom recovery too!
I know this is a lot of questions and i'm not much of a n00b.
Any help would be greatly appreciated.
Thanks in advance.
re: wifi not working
djphooka said:
Hey guys. So, I've been reading and reading and flashing and everything.
Got an S4. It was running 4.3 and I was having Wifi issues.
I had read it was a software issue and welp, I've always liked Cyanogen Mod so I installed that.
It installed the nightly build which was WAY too buggy (I use my camera a lot and it kept failing) edit: but the WiFi worked perfectly!
I got back to 4.2.2 now but now the WiFi is Totally not working now and i'm getting that message about
Kernel is not Seandroid enforcing
set warranty bit : kernel
and it takes forever to reboot.
Since I was on 4.3 do i need to flash that stock rom to get my stock kernel back?
Or can I install deoxed version??
I still need to put custom recovery too!
I know this is a lot of questions and i'm not much of a n00b.
Any help would be greatly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
If you are using any Cyanogen/AOSP/AOKP/GE/KiKat roms then please ignore the following.
If you are using a M919 Tmobile Samsung S4 Jellybean Touchwiz 4.2.2 based rom then here is
the way to fix your wifi issue.
Here is the download link for Ktoonsez's custom kernel:
http://ktoonsez.jonathanjsimon.com/sgs4/TW/KT-SGS4-JB4.2-TW-TMO-12.12.2013.zip
Download it and flash it using cwm/twrp recovery and the wifi will work for you again.
Good luck!
I'm running the stock rom but it seems like somehow it didn't overwrite the Cyanogen kernel.
re: kernel
djphooka said:
I'm running the stock rom but it seems like somehow it didn't overwrite the Cyanogen kernel.
Click to expand...
Click to collapse
That means that this kernel is for you..... "IF you are really running the stock rom".
If your rom was REALLY stock, I mean if you "ODIN" flashed the stock rom using the
official Samsung M919 4.2.2 Jellybean Touchwiz firmware from http://SamMobile.com
or other sources then whatever kernel you had the stock rom would have over-written it.
If you are sure that it's not over written that means that you have NOT ODIN flashed the
official 4.2.2 M919 MDL firmware.
Good luck!
Hi XDA Members,
I have an average understanding of rooted android devices and roms. I currently have a Tmobile Galaxy Note II (T0ltetmo)(T889) that is rooted. It has TWRP on it. I am running currently pacman rom (pac_t0ltetmo-4.3-20140128.zip) which works fine.
Here is the problem.... I am trying to upgrade to a Pacman Rom that is based on Android 4.4 which I have found. I installed the Pacman rom 4.4 & GAPPS stock 4.4 which works flawlessly, the only problem is..... My Radio doesn't work! I have my GSM Sim in and nothing comes up! Heres the thing aswell... I installed other roms that are based on 4.4 and the radio's doesn't work on any of those ROMs either, as soon as restore my other backups that are 4.3 the radio works.
What could be the problem? Is there something I am forgetting to do that the developers didn't tell me? Do I need to install something else that wasn't specified?
Please help!
Flash the newest kernel and modem if you haven't already. I noticed much the same when just testing 4.4 from a 4.1 rom.
Sent from my SGH-T889 using Tapatalk
pyr02k1 said:
Flash the newest kernel and modem if you haven't already. I noticed much the same when just testing 4.4 from a 4.1 rom.
Sent from my SGH-T889 using Tapatalk
Click to expand...
Click to collapse
SOLVED! I flashed just the modem and everything was fine! Thank you.