Hello everyone! im new to this forum!!
Im having an issue with MHL
Basically i plug the MHL adaptor into my phone and it goes into a continuous reboot loop
It goes to the Google logo then reboot again
Anyone know what it might be. Incompatibale rom? kernal?
Do i need to flash something?
Is there a rom which it does work on.
anyway im running:
Version :4.2.1
Rom: Cyanogenmod 10.1 Nightly 20130209 maguro
Kernal: 3.0.31 -Cyanogenmod-gf5fa822
Build: cm_maguro_userdebug 4.2.1 JOP40G
THANKS IN ADVANCE
MHL works on my handset. Are you using Samsung original one?
Beamed from my CM10.1 Galaxy Nexus
Herman76 said:
MHL works on my handset. Are you using Samsung original one?
Beamed from my CM10.1 Galaxy Nexus
Click to expand...
Click to collapse
Im using one from ebay. its not original samsung but...
It does work on Stock rom which is my brothers phone. exactly the same phone, just stock
thanks for quick reply!
Just went back to stock works fine.
Im guessing that is a software issue as the hardware seems to be fine when on stock.
anybody know a ROM that its working on. and that i can try?
thanks!!:good::good::good:
iHarpZz said:
Just went back to stock works fine.
Im guessing that is a software issue as the hardware seems to be fine when on stock.
anybody know a ROM that its working on. and that i can try?
thanks!!:good::good::good:
Click to expand...
Click to collapse
Hi, I'm running CM10 ( 4.1.2 ) on my *Sprint* Gnex with NO, issues the MHL mirroring is 100% stable.
I personally haven't had much luck with 4.2.1 based Roms and MHL Mirroring.
I think PA 4.2.1 was the only one I had luck with other than the CM 10 4.1.2.
Exact Rom: Cm-10-201210110-Experimental-Toro-M2
http://download.cyanogenmod.com/get/jenkins/9855/cm-10-20121011-EXPERIMENTAL-toro-M2.zip
Related
hello every one
i bought (mhl hdmi ) hdtv adabter model : eia2uhunbkg type cek 04/2011 Rev. 1.2 samsung
its working only for video ( movies ) its not showing pictures or any thing else ,
rom cm10 4.1.2
there is any one have idea how to fix this problem ,
Thanks and Regards
LARS1982 said:
hello every one
i bought (mhl hdmi ) hdtv adabter model : eia2uhunbkg type cek 04/2011 Rev. 1.2 samsung
its working only for video ( movies ) its not showing pictures or any thing else ,
rom cm10 4.1.2
there is any one have idea how to fix this problem ,
Thanks and Regards
Click to expand...
Click to collapse
its an known problem with CM10 and it wont be fixed soon, on other roms it will work
Regards, Tomaat
Tomaat said:
its an known problem with CM10 and it wont be fixed soon, on other roms it will work
Regards, Tomaat
Click to expand...
Click to collapse
Thanks Tommat
is it work with cm9 9.1.0 stable rom or i should back to original rom 4.0.4
Try TW rom
LARS1982 said:
Thanks Tommat
is it work with cm9 9.1.0 stable rom or i should back to original rom 4.0.4
Click to expand...
Click to collapse
I tried installing CM9 after being in your situation, but got stuck at boot animation of CM9. Now back to CM10. Gapps are dead, will re flash it.
Somewhere I read that TW. Based ROMs give HDMI but haven't tried. You can try and let us know.
LARS1982 said:
Thanks Tommat
is it work with cm9 9.1.0 stable rom or i should back to original rom 4.0.4
Click to expand...
Click to collapse
None of the aosp based roms support mhl afaik. The ones that work are TW based roms.
Ps. RocketMiui works with it.
LARS1982 said:
hello every one
i bought (mhl hdmi ) hdtv adabter model : eia2uhunbkg type cek 04/2011 Rev. 1.2 samsung
its working only for video ( movies ) its not showing pictures or any thing else ,
rom cm10 4.1.2
there is any one have idea how to fix this problem ,
Thanks and Regards
Click to expand...
Click to collapse
Hi Lars,
I first tried mhl cable like you did. But ended up with a wifi modem for the Samsung tv, and the application iMedia share on my galaxy note streams video, pictures and music like a charm...
Bobo
same here...
Thank you guys
any way i will wait the official rom (jelly bean )
Hey,
I am just not getting a suitable or profitable answer about OTG on gnex with 4.2.1 working or not.?
Also which previous ver of Android does it support.?
Anyone having any news about it please share.
Thanks
Go read the last page in the air kernel thread in the GSM section. They are saying it is working
namtombout said:
Go read the last page in the air kernel thread in the GSM section. They are saying it is working
Click to expand...
Click to collapse
Will try Air Kernel and report back tomorrow. Im also suspecting on port of my gn coz some time it detected when i slightly move the cable through Stick Mount but does'nt give me any notification in notification bar. I also change the OTG cable but nothing. Currently i am using AOKP mr1 build 2 with its stock kernel(lean).
That's nice. no need to report back
Just found that its working with Xylon 18 with its stock kernel but still not detecting mouse dono why?
OTG works with any stock kernel of the GalNex. It finds MassStorageDevices fine and works great with keyboards and mice. The only issue is it doesn't mount the MassStorageDevices. If you're rooted enough to get a custom kernel you're rooted enough to take 5 seconds and mount the device yourself. Still no mounting in the stock 4.2.1 kernel though so you can only use MassStorageDevices with root.
sniperfox47 said:
OTG works with any stock kernel of the GalNex. It finds MassStorageDevices fine and works great with keyboards and mice. The only issue is it doesn't mount the MassStorageDevices. If you're rooted enough to get a custom kernel you're rooted enough to take 5 seconds and mount the device yourself. Still no mounting in the stock 4.2.1 kernel though so you can only use MassStorageDevices with root.
Click to expand...
Click to collapse
What exactly you wana say....
If my device is rooted on stock 4.2.1 & stock kernel then it will work or not??
So I upgraded from CM10.0 stable to CM10.1 monthly 2 yesterday night and everything seems pretty good. However, I tried to download Dashclock widget from the google play store yesterday, yet it says that my Galaxy SIII is incomptabile.
What should I do to fix this? In case it helps, I did a dirty flash. Didn't wipe 10.0 and just installed 10.1 over it.
Android Version: 4.2.2
CM Version: 10.1 (m2 - d2att)
Phone: Galaxy SIII Bell
momin16 said:
So I upgraded from CM10.0 stable to CM10.1 monthly 2 yesterday night and everything seems pretty good. However, I tried to download Dashclock widget from the google play store yesterday, yet it says that my Galaxy SIII is incomptabile.
What should I do to fix this? In case it helps, I did a dirty flash. Didn't wipe 10.0 and just installed 10.1 over it.
Android Version: 4.2.2
CM Version: 10.1 (m2 - d2att)
Phone: Galaxy SIII Bell
Click to expand...
Click to collapse
You can attempt to do a clean wipe install, however I suspect its just not compatible with the new version of JB. CM10 was 4.1.2 and CM10.1 is 4.2.2. So its very possible the developer has not updated their app to include the new version of JB
Sent from my Galaxy S3 on AT&T
RPelham said:
You can attempt to do a clean wipe install, however I suspect its just not compatible with the new version of JB. CM10 was 4.1.2 and CM10.1 is 4.2.2. So its very possible the developer has not updated their app to include the new version of JB
Sent from my Galaxy S3 on AT&T
Click to expand...
Click to collapse
Dashclock works fine on 4.2.2, been using it for at least a week on my N7 on 4.2.2 with no problems at all.
rcook55 said:
Dashclock works fine on 4.2.2, been using it for at least a week on my N7 on 4.2.2 with no problems at all.
Click to expand...
Click to collapse
Well, seems we got an answer then lol. Try a clean install.
Sent from my Galaxy S3 on AT&T
RPelham said:
Well, seems we got an answer then lol. Try a clean install.
Sent from my Galaxy S3 on AT&T
Click to expand...
Click to collapse
Thanks everyone. Will try it.
Did the clean install solve your problems?
I'm experiencing a problem with Dashclock incompatibility, where the web version of the Play Store says it's compatible with my phone, but the Play Store on my device says it's incompatible. If I click install via web, nothing happens on my phone.
CM10.1
Custom DPI (but using patched play store)
854x480
Edit: apk installation from file explorer works fine, found this download link: http://www38.zippyshare.com/v/90618241/file.html
dashclock incompatibility
i have cyanogenmod 10.2( android 4.3.1) and im having the same issue where i can install it but cant open it.
i understand u cant use dashclock in cyanogen mod, but if u cant use dashclock is there any substitute for showing your notifications on your clock screen on cyanogenmod?
I was using the official 4.04 and could not get my samsung MHL adapter to work. Then i tried Task's latest 4.22 AOKP and still nothing.
When i was on 4.04 my phone did say that the hdmi cable was attached but thats it I would like to get this working. Any help appreciated :good:
is there any reason why you havent tried it on stock jelly bean (4.1.1 or 4.1.2)?
MHL hasn't worked for me with CM or Task's since the 3.4 kernel update. The last Task ROM to work for me was 3.14. You could try flashing that one. Also try rebooting your phone while it's fully hooked up to your adapter. Try using a ROM that isn't using the 3.4 kernel.
xBeerdroiDx said:
is there any reason why you havent tried it on stock jelly bean (4.1.1 or 4.1.2)?
Click to expand...
Click to collapse
Is there a 4.1.1 that i can flash with cwm? Im with bell if that matters. Thx
Hi XDA Members,
I have an average understanding of rooted android devices and roms. I currently have a Tmobile Galaxy Note II (T0ltetmo)(T889) that is rooted. It has TWRP on it. I am running currently pacman rom (pac_t0ltetmo-4.3-20140128.zip) which works fine.
Here is the problem.... I am trying to upgrade to a Pacman Rom that is based on Android 4.4 which I have found. I installed the Pacman rom 4.4 & GAPPS stock 4.4 which works flawlessly, the only problem is..... My Radio doesn't work! I have my GSM Sim in and nothing comes up! Heres the thing aswell... I installed other roms that are based on 4.4 and the radio's doesn't work on any of those ROMs either, as soon as restore my other backups that are 4.3 the radio works.
What could be the problem? Is there something I am forgetting to do that the developers didn't tell me? Do I need to install something else that wasn't specified?
Please help!
Flash the newest kernel and modem if you haven't already. I noticed much the same when just testing 4.4 from a 4.1 rom.
Sent from my SGH-T889 using Tapatalk
pyr02k1 said:
Flash the newest kernel and modem if you haven't already. I noticed much the same when just testing 4.4 from a 4.1 rom.
Sent from my SGH-T889 using Tapatalk
Click to expand...
Click to collapse
SOLVED! I flashed just the modem and everything was fine! Thank you.