Hey,
I am just not getting a suitable or profitable answer about OTG on gnex with 4.2.1 working or not.?
Also which previous ver of Android does it support.?
Anyone having any news about it please share.
Thanks
Go read the last page in the air kernel thread in the GSM section. They are saying it is working
namtombout said:
Go read the last page in the air kernel thread in the GSM section. They are saying it is working
Click to expand...
Click to collapse
Will try Air Kernel and report back tomorrow. Im also suspecting on port of my gn coz some time it detected when i slightly move the cable through Stick Mount but does'nt give me any notification in notification bar. I also change the OTG cable but nothing. Currently i am using AOKP mr1 build 2 with its stock kernel(lean).
That's nice. no need to report back
Just found that its working with Xylon 18 with its stock kernel but still not detecting mouse dono why?
OTG works with any stock kernel of the GalNex. It finds MassStorageDevices fine and works great with keyboards and mice. The only issue is it doesn't mount the MassStorageDevices. If you're rooted enough to get a custom kernel you're rooted enough to take 5 seconds and mount the device yourself. Still no mounting in the stock 4.2.1 kernel though so you can only use MassStorageDevices with root.
sniperfox47 said:
OTG works with any stock kernel of the GalNex. It finds MassStorageDevices fine and works great with keyboards and mice. The only issue is it doesn't mount the MassStorageDevices. If you're rooted enough to get a custom kernel you're rooted enough to take 5 seconds and mount the device yourself. Still no mounting in the stock 4.2.1 kernel though so you can only use MassStorageDevices with root.
Click to expand...
Click to collapse
What exactly you wana say....
If my device is rooted on stock 4.2.1 & stock kernel then it will work or not??
Related
Bought OTA Conecter from ebay but it's not working itry two usb mouse
http://www.ebay.co.uk/itm/140741116011?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
dadyal said:
Bought OTA Conecter from ebay but it's not working itry two usb mouse
http://www.ebay.co.uk/itm/140741116011?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
Im guessing that your are using a custom kernel. Some don't support usb OTG. Check if the kernel supports it, otherwise flash a kernel that does. For instance ICS siyah, thoravukk support using it. Cf-root kernels as well since they are mostly stock
takkaros said:
Im guessing that your are using a custom kernel. Some don't support usb OTG. Check if the kernel supports it, otherwise flash a kernel that does. For instance ICS siyah, thoravukk support using it. Cf-root kernels as well since they are mostly stock
Click to expand...
Click to collapse
no i am on stock XWLP7
return to seller .
jje
i told him and he sent me a replacement but it also dnt work
need Siyah Kernel
I have the same connector, when I bought had the same problem, only usb stick he recognized me, started reading and realized that samsung lock that option, then install Siyah kernel and now I can connect keyboards, moues, etc..
here is the thread
http://forum.xda-developers.com/showthread.php?t=1555259
Hello everyone! im new to this forum!!
Im having an issue with MHL
Basically i plug the MHL adaptor into my phone and it goes into a continuous reboot loop
It goes to the Google logo then reboot again
Anyone know what it might be. Incompatibale rom? kernal?
Do i need to flash something?
Is there a rom which it does work on.
anyway im running:
Version :4.2.1
Rom: Cyanogenmod 10.1 Nightly 20130209 maguro
Kernal: 3.0.31 -Cyanogenmod-gf5fa822
Build: cm_maguro_userdebug 4.2.1 JOP40G
THANKS IN ADVANCE
MHL works on my handset. Are you using Samsung original one?
Beamed from my CM10.1 Galaxy Nexus
Herman76 said:
MHL works on my handset. Are you using Samsung original one?
Beamed from my CM10.1 Galaxy Nexus
Click to expand...
Click to collapse
Im using one from ebay. its not original samsung but...
It does work on Stock rom which is my brothers phone. exactly the same phone, just stock
thanks for quick reply!
Just went back to stock works fine.
Im guessing that is a software issue as the hardware seems to be fine when on stock.
anybody know a ROM that its working on. and that i can try?
thanks!!:good::good::good:
iHarpZz said:
Just went back to stock works fine.
Im guessing that is a software issue as the hardware seems to be fine when on stock.
anybody know a ROM that its working on. and that i can try?
thanks!!:good::good::good:
Click to expand...
Click to collapse
Hi, I'm running CM10 ( 4.1.2 ) on my *Sprint* Gnex with NO, issues the MHL mirroring is 100% stable.
I personally haven't had much luck with 4.2.1 based Roms and MHL Mirroring.
I think PA 4.2.1 was the only one I had luck with other than the CM 10 4.1.2.
Exact Rom: Cm-10-201210110-Experimental-Toro-M2
http://download.cyanogenmod.com/get/jenkins/9855/cm-10-20121011-EXPERIMENTAL-toro-M2.zip
well, just got my Gnex... and i really like accept for one issue... lots of random shutdown and reboot there is no pattern i can define..
how ever... fort the most part when it shuts down i am forced to pull the battery inorder to restart it... this is on an unlocked and rooted phone.. but it also happened on a completely stock rom... dang i really like this phone to... im wondering is its an issue with hardware, battery or rom right now im on Jellybean 4.2 rooted.. stock.. not really sure what else to do... perhaps try a different rom and kernel? bit lost here.. i just hope the phone is not defective... that would kinda suck..
any help is appreciated....
scuzzo said:
well, just got my Gnex... and i really like accept for one issue... lots of random shutdown and reboot there is no pattern i can define..
how ever... fort the most part when it shuts down i am forced to pull the battery inorder to restart it... this is on an unlocked and rooted phone.. but it also happened on a completely stock rom... dang i really like this phone to... im wondering is its an issue with hardware, battery or rom right now im on Jellybean 4.2 rooted.. stock.. not really sure what else to do... perhaps try a different rom and kernel? bit lost here.. i just hope the phone is not defective... that would kinda suck..
any help is appreciated....
Click to expand...
Click to collapse
Which kernel are you using and what params for that ( if any ?)...?
Ashtrix said:
Which kernel are you using and what params for that ( if any ?)...?
Click to expand...
Click to collapse
well, right now i have franko kernel installed , no params adjusted... not even sure where i would find the section in settings.. on a stock Verizion JB 4.2... im not even sure what would be the best rom to try
some one suggested MetalC.. but i cant find the Gapps that work with that one... so what i need is a solid ROM, Kernel and Gapps..
i was able to root via the Nexus Root Tool kit... that went well... but now i need to decide what Toro version rom i need to use.. and im keeping an eye out to see if the Franko kernel brings any joy for those random reboots and shutdowns... the guy i bought the Gnex from said he will do a full refund but i want to sort this out if possible... this little machine is too cool just to cash out on...
time to research on roms and stuff i guess..
scuzzo said:
well, right now i have franko kernel installed , no params adjusted... not even sure where i would find the section in settings.. on a stock Verizion JB 4.2... im not even sure what would be the best rom to try
some one suggested MetalC.. but i cant find the Gapps that work with that one... so what i need is a solid ROM, Kernel and Gapps..
i was able to root via the Nexus Root Tool kit... that went well... but now i need to decide what Toro version rom i need to use.. and im keeping an eye out to see if the Franko kernel brings any joy for those random reboots and shutdowns... the guy i bought the Gnex from said he will do a full refund but i want to sort this out if possible... this little machine is too cool just to cash out on...
time to research on roms and stuff i guess..
Click to expand...
Click to collapse
For 4.4 go for cMetal / Playfulgod / dhacker's CM builds, for a 4.3 experience i dunno any one for toro and for kernel i think you can try out MpoKang as it can be flashed on 4.3 and up just have a look in the official thread and you'll be able to find zips plus use trickster app for the kernel control :good: !!
well, a bit of a followup friday swapped out the stock kernel for Franko kernel... and i have had it on for about most of the day yesterday and zero random shutdowns and no SOD.. this little thing is great and its a lot more easy to have this around then a remote for 2 google tv a roku and an xbmc box... i have not delved into new roms, the JB stock seems to be working fine im getting at least 10 hrs out of the battery... this is be best micro tablet i could ever find for 70 bucks... and the screeen is quite nice.. im sure i will be moding soon enough... but for now just a kernel change seems to have put an end to the sleep of death and random shutoffs..
Has anyone confirmed Otg working in any Jellybean or Kitkat roms. Or does anyone know how to get it to work. I was thinking it had to be enabled or disabled in the kernel ? Anyway any suggestions would help i love being able to use my pen drive it is convient
spirodave said:
Has anyone confirmed Otg working in any Jellybean or Kitkat roms. Or does anyone know how to get it to work. I was thinking it had to be enabled or disabled in the kernel ? Anyway any suggestions would help i love being able to use my pen drive it is convient
Click to expand...
Click to collapse
Works on both JellyBean and KitKat. It is enabled in the kernel by default on official CM ROMs.
For flashdrives and low power devices, it works great. If you want to run an external harddrive though, you need to get a powered hub because I don't think the port can output 500mA or above.
Hello,
I recently needed an emulation machine for work. So I took my old note 2 rooted it and downgraded it to 4.1.1 so I could connect my wiimotes (the main purpose of this) for said emulators. As you all know I'm sure the Bluetooth stack is missing the protocol for this connection type. In 4.2+
My question is.....is there anyway to make a custom ROM for the note 10.1 2014 edition that is based on 4.1.1?
Thanks.
plugsmustard said:
Hello,
I recently needed an emulation machine for work. So I took my old note 2 rooted it and downgraded it to 4.1.1 so I could connect my wiimotes (the main purpose of this) for said emulators. As you all know I'm sure the Bluetooth stack is missing the protocol for this connection type. In 4.2+
My question is.....is there anyway to make a custom ROM for the note 10.1 2014 edition that is based on 4.1.1?
Thanks.
Click to expand...
Click to collapse
Did you try with Xluco's kernel ? it has written to have the ability to support Wii Controller ( If it worked , let me know , because I'm cooking Prime V5 and It's also going to have the Wii Controller support too ) .. I'm waiting eagerly for you'r results
With Best Wishes
Hitman1376
I'm gonna sound like a noob. But to be honest kernels are the things I never screwed with. Do i just flash this with twrp?
It's got the rooted 5.1.1 fw on it and just to clarify it's the SP600
I've got everything I need here (including the Kernel I downloaded) at work so.....
Okay so I flashed the kernel using twrp and unfortunately the wiimotes would not connect using blue IME or the old Wiimote Controller app.
Is there something I'm missing or does it just not work for me?
plugsmustard said:
Okay so I flashed the kernel using twrp and unfortunately the wiimotes would not connect using blue IME or the old Wiimote Controller app.
Is there something I'm missing or does it just not work for me?
Click to expand...
Click to collapse
So , I guess It means that the drivers are not compatible or maybe even not working at all ... If it's possible , flash a 4.4.2 TW stock ROM and try this kernel HERE ( If you're currently on 5.1.1 you need to flash a stock ROM using Odin ) ... this kernel I provide you is one of Xluco's KK kernels ... I'll wait for you'r results then ... Good luck
With Best Wishes
Hitman1376
Re did everything. Installed 4.4.2 and the kernel you mentioned and it still does not work with either application.
Error: bt socket connection failed
Is there a difference between stock and TW stock cuz I installed fresh stock then rooted it and installed that kernel
Regardless of whether TW stock is TouchWiz
I installed a 4.4.2 TW stock rom with root and installed the same kernel. Still nothing.
I don't know what I'm talking about here but is it really this difficult? I'm know it is to some degree, but how has this not been rectified a million times over?
Lost cause then?
Thanks to everyone who accomplishes these things and a massive thanks to the people who make the things we use to do these things...lol
plugsmustard said:
Re did everything. Installed 4.4.2 and the kernel you mentioned and it still does not work with either application.
Error: bt socket connection failed
Is there a difference between stock and TW stock cuz I installed fresh stock then rooted it and installed that kernel
Click to expand...
Click to collapse
plugsmustard said:
Regardless of whether TW stock is TouchWiz
I installed a 4.4.2 TW stock rom with root and installed the same kernel. Still nothing.
I don't know what I'm talking about here but is it really this difficult? I'm know it is to some degree, but how has this not been rectified a million times over?
Lost cause then?
Thanks to everyone who accomplishes these things and a massive thanks to the people who make the things we use to do these things...lol
Click to expand...
Click to collapse
Well , I'm Sorry to say that but , I guess there's no solution for getting the Wiimote to work on you're TAB ( Actually , XBOX & PS remotes are all accepted with Xluco's or even my kernel ) But , as you can see in many other threads , It seems like currently there's no way ... Don't worry MAN , I personally don't have a Wiimote let's just take it easy ... just enjoy the latest TW ROM with Prime V4 ( actually , V5 is in it's way !! )
With Best Wishes
Hitman1376
Well damn. I guess I'll just have to use my note 2 with the tv out.....no sound though.
Thanks. And I'll definitely install they new prime v5