Radio 1.00.00.0928 - HTC One V

After a bunch of digging around these and other forums. It seems that there is not much that can be done with custom roms on the VM CDMA phone with Radio 1.00.00.0928 (other than the codefire X one)? I attempted to downgrade the radio version but ended up with a "HBOOT is older" error.
Thanks.

try these:
http://forum.xda-developers.com/showthread.php?t=1943029
http://forum.xda-developers.com/showthread.php?t=2245170
http://forum.xda-developers.com/showthread.php?t=2147407 (not too sure about this one but definitely the middle link should be what you want)

Thanks. I'll try those.

nalgene said:
Thanks. I'll try those.
Click to expand...
Click to collapse
No problem, let me know if you need anything just pm me

I'm using the Rhythmic ROM with the updated radio. Works fine me
Sent from my One V using xda app-developers app

myOneV9.5+CDMA with the modules and kernel posted in its thread from russellonev and Duir also works.

Gryff302 said:
myOneV9.5+CDMA with the modules and kernel posted in its thread from russellonev and Duir also works.
Click to expand...
Click to collapse
They will work with all of the sense roms.
myOne
x3reme
Angry
XPERIA One
jmz stock odex
jmz stock deodex
simonsimons34
jmzOneV
ect, ect, ect........
http://forum.xda-developers.com/showthread.php?p=40982649
:thumbup: go check it out

Thanks for the suggestions everyone.
All of these ROM/KERNEL combinations seem end up causing reboot loops. If I flash the FOTA-Compatible Sick Kernel and the included boot.img it freezes at the "HTC quietly brilliant" screen with the bootloader disclaimer.
Cheers.

Just use rhythmic ROM. It works fine for me
Sent from my One V using xda app-developers app

FatBoy_Seconds said:
Just use rhythmic ROM. It works fine for me
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
With what Kernel?

The one it comes with. Get rhythmic ROM 1.2D, get the OTA update. Zip and the 1.2e.zip. Flash the ROM, then ota update.zip then the 1.2e.zip. then fast boot flash the boot.IMG. if you do it in the right order. It will work. Trust me
Sent from my One V using xda app-developers app

FatBoy_Seconds said:
The one it comes with. Get rhythmic ROM 1.2D, get the OTA update. Zip and the 1.2e.zip. Flash the ROM, then ota update.zip then the 1.2e.zip. then fast boot flash the boot.IMG. if you do it in the right order. It will work. Trust me
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
I'm going to try this but I'm having trouble finding the OTA update.zip

nalgene said:
I'm going to try this but I'm having trouble finding the OTA update.zip
Click to expand...
Click to collapse
Is this it here :
http://www.androidmodmarket.com/ModMarket/Listings/XDA-L-2147407.html

Fatboy_seconds method worked form me. The OTA Update fix is here :
OTA FIX
I flashed the boot.img from the above fix using fastboot as the final step.
Cheers.

So it works pretty flawless right?

FatBoy_Seconds said:
So it works pretty flawless right?
Click to expand...
Click to collapse
I'm find that there are sometimes the audio will go all crackly when some other application interrupts an audio stream. Other than that, it's working just fine.

That happens to me occasionally also
Sent from my One V using xda app-developers app

nalgene said:
I'm find that there are sometimes the audio will go all crackly when some other application interrupts an audio stream. Other than that, it's working just fine.
Click to expand...
Click to collapse
I wonder why the FOTA kernel that -DUIR- posted didn't work for you? did you fastboot flash the boot.img from his kernel?

lilrob1213 said:
I wonder why the FOTA kernel that -DUIR- posted didn't work for you? did you fastboot flash the boot.img from his kernel?
Click to expand...
Click to collapse
So, today I flashed my original restored using CWM recovery and flashed my original kernel from there as well.
I then did a full wipe and installed AngryHTC and flashed the boot.img included with the ROM. ---> Reboot Loop.
I then flashed the boot.img from my CWM backup ( I assume this is the kernel ) ----> ROM boots but no wifi
I then flashed the FOTA kernel (which no longer includes a zip, only the boot.img) ---> Everything works
I honestly don't know why it wasn't working before, maybe the wrong combination of flashes or in the wrong order. I will try with some other ROMS when I get a bit of time to mess around with it.
It's great that there's this very helpful support system here.
Cheers.

nalgene said:
So, today I flashed my original restored using CWM recovery and flashed my original kernel from there as well.
I then did a full wipe and installed AngryHTC and flashed the boot.img included with the ROM. ---> Reboot Loop.
I then flashed the boot.img from my CWM backup ( I assume this is the kernel ) ----> ROM boots but no wifi
I then flashed the FOTA kernel (which no longer includes a zip, only the boot.img) ---> Everything works
I honestly don't know why it wasn't working before, maybe the wrong combination of flashes or in the wrong order. I will try with some other ROMS when I get a bit of time to mess around with it.
It's great that there's this very helpful support system here.
Cheers.
Click to expand...
Click to collapse
The FOTA boot.img is for sense based ROMs and only works with the newest radio and hboot
Sent from my One V using xda app-developers app

Related

[How to] Boot ALL Jellybean sense roms on cid unsupported devices

General Information
Since everything here is on fire because of the sense jellybean leaked firmware and many are crying that they do not have the appropriate CID to flash the new firmware, and some also replied to my post they are not able to boot with that UNOFFICAL and BETA METHOD i decided to write this short guide.
At first, i do not think that the rom flashed with this method is working as a daily for you, more a preview for when the devs found a way to bring the update also to carrier branded phones.
Things that are reported to work with trips 3.4.11 kernel but not with his 3.1.10 kernel are:
- Usb storage ( )
Things that will not work are:
- Sound
- Youtube App
- Wifi Dropouts, not for me but another person mentioned it
This method does not update your hboot. So you´re safe to go back. And one more time, this is just meant as a preview for now, so dont expect the full jellybean experience. be lucky that we have trip and can at least boot this
So here will be the general instructions for all jellybean sense roms.
1. Download your favourite jellybean sense rom and put it on your sdcard
A few of them:
ARHD: http://forum.xda-developers.com/showthread.php?t=1562603 (not available for now)
IC: http://forum.xda-developers.com/showthread.php?t=1588669
Maximus: http://forum.xda-developers.com/showthread.php?t=1601543
Ordroid: http://forum.xda-developers.com/showthread.php?t=1836919
2. Download trips kernel from here: http://tripndroid.bindroidroms.com/TripNDroid_RVISED_3.4.11-002.zip put one copy on your phones sdcard and one on your pc
3. Repack trips boot.img found in the previously downloaded .zip with the ramdisk from the kernel which is included in your rom that you downloaded in the first step using this nice little tool: http://forum.xda-developers.com/showthread.php?t=1815607
Put the repacked boot.img in your fastboot folder
4. Boot your phone into fastboot mode and flash the repacked boot.img you downloaded using following commands
------> fastboot flash boot boot.img
------> fastboot erase cache
5. after this boot into custom recovery and perform a full wipe (including system, data, cache, dalvik)
6. flash your rom (just in case: tick none of the options in aroma)
7. flash modules from trips kernel which you placed in step 2 on your sdcard
8. boot into your jellybean preview.
Credits to shnizlon for the rom, to TripNRaVeR for his 3.1.10 kernel that offers this possibility , finally to chrisoverson for online repacker
I´m not responsible for anything you do to your phone!
hi
im on CID 38 it is not supported as of now
by doing ur process u mean i can flash any of the JB roms
kindly tell me if the process done right it its ok
as i dont wana brick my phone cant afford another one as of now
can u kindly confirm that u have done it and it works:good:
Anyone have try it.. still waiting
Sent from my HTC One X using xda premium
it work ! Wifi work with screen on.
haree said:
hi
im on CID 38 it is not supported as of now
by doing ur process u mean i can flash any of the JB roms
kindly tell me if the process done right it its ok
as i dont wana brick my phone cant afford another one as of now
can u kindly confirm that u have done it and it works:good:
Click to expand...
Click to collapse
Hi a few people have confirmed that it works, but there are some bugs as stated in the op, so you can give it a try to see what all the fuss is about and so that you don't have to feel totally left out, but currently it can't really be used as a daily driver
bernyfur said:
it work ! Wifi work with screen on.
Click to expand...
Click to collapse
Are sure? Did you try it?
Sent from my HTC One X using xda premium
Already try it one the day 2.0.0 out.. but the most i hate is no in call sound.
about sd bug, I think it is because of vold.fstab, as the sd mount is different as ICS, that why it not detected in JB.
I tried this last night, and YES it does work.
However it's pretty unusable and i ended up flashing back to viperX. Still it was nice to sample Jelly Bean.
I'm on T-MOB005 UK
iamaniff said:
Are sure? Did you try it?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Every JB sense rom boot using trip kernel, just repack it and flash.. Already try all JB ROM, but no fun for me, as it is too buggy for unsupported CID.
@OP : Why don't you change the thread to "how to flash Sense JB on unsupported CID device" as it could boot all JB Sense ROM.
haree said:
hi
im on CID 38 it is not supported as of now
by doing ur process u mean i can flash any of the JB roms
kindly tell me if the process done right it its ok
as i dont wana brick my phone cant afford another one as of now
can u kindly confirm that u have done it and it works:good:
Click to expand...
Click to collapse
iamaniff said:
Anyone have try it.. still waiting
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
iamaniff said:
Are sure? Did you try it?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
i did it exactly as i described in the op yesterday in the evening and there were the bugs i explained above
your hboot is not upgraded while youre doing this procedure so you can easily flash back
and i also mentioned it´s most likely only for preview!
I try it my cid is t-mob101 and it work Sense jelly bean is nice but i have the Radio Bug..it works only if the screen is on...when it is locked and i turn it on i have Signal Bars but in lockscreen it shows no signal...it is Bad...but the hole rom is nice ..i hope someone fix the bugs
Sent from my HTC One X using xda premium
Stay with ics :thumbup:
Sent from my HTC One X using xda premium
nashshafrulrezza said:
Every JB sense rom boot using trip kernel, just repack it and flash.. Already try all JB ROM, but no fun for me, as it is too buggy for unsupported CID.
@OP : Why don't you change the thread to "how to flash Sense JB on unsupported CID device" as it could boot all JB Sense ROM.
Click to expand...
Click to collapse
it could but the boot.img i provided is only for ordroid. i don´t think it will boot with insertcoin or arhd as they made custom ramdisk modifications. But you´re right, basically if you repack trips kernel with the jb sense roms kernel ramdisk it will boot i think
I will update the thread in the evening i´m busy now because i have to break up my grandmother´s garden that sounds funny and i hope it´s correct
iamaniff said:
Are sure? Did you try it?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
yes ! jb is amazing!
Freak07 said:
i did it exactly as i described in the op yesterday in the evening and there were the bugs i explained above
your hboot is not upgraded while youre doing this procedure so you can easily flash back
and i also mentioned it´s most likely only for preview!
Click to expand...
Click to collapse
hi
thanks for ur kind reply :good::laugh:
as i have just got my official 2.17 india and i cant fine the ruu or the stock recovery for this rom i think i wont take my chances now and wait for the above or the Off JB update :laugh:
bernyfur said:
yes ! jb is amazing!
Click to expand...
Click to collapse
Sent from my HTC One X using xda premium
haree said:
hi
thanks for ur kind reply :good::laugh:
as i have just got my official 2.17 india and i cant fine the ruu or the stock recovery for this rom i think i wont take my chances now and wait for the above or the Off JB update :laugh:
Click to expand...
Click to collapse
why you need RUU or stock recovery? This is the same way to flash custom rom with our own choice kernel.
nashshafrulrezza said:
why you need RUU or stock recovery? This is the same way to flash custom rom with our own choice kernel.
Click to expand...
Click to collapse
Precise! Just make nandroid, follow my instructions, and afterwards Flash Boot.img from your nandroid and restore your nandroid
Sent from my HTC One X using xda premium
Freak07 said:
Precise! Just make nandroid, follow my instructions, and afterwards Flash Boot.img from your nandroid and restore your nandroid
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
hi
now the stock recovrey av right now is 1.29
after i do the nand flash of the 2.17 off i need the stock recovery for this one right the above wont work right ie if i want to go back to stock and get the offcial OTA when it does come do correct me if im wrong
haree - What state is your phone in now? i.e. Is your bootloader unlocked?

Help, HTC White screen - CM10

Hi,
I'm new to the ONE X, just switched from the Sensation. I've updated the firmware to 1.28.0000. I can instal all Sense ICS and JB ROMS with no issues but I want CM10, unfortunately I get stuck on the white HTC logo, even after flashing boot.img and erasing cache. What should I do, everything seems so much more confusing on this device!
Josh.
go to recovery and flash any sense based JB rom, Don't forget to flash the kernel through fastboot.
and if you want a working cm10 then you have to flash a kernel compatible with hboot 1.31.
but it has gps issue i guess.
search for the kernel in cm10 thread.. you will find it.
Alright, so I now have ARHD 13 installed and working fine. How should I go about installing a CM10 ROM without getting stuck? Thanks.
you need to flash the correct kernel. The one which comes with the rom would not work.
I guess its the mdeejay kernel which is working on hboot 1.31 but as i said gps is not working with it.
faiz02 said:
you need to flash the correct kernel. The one which comes with the rom would not work.
I guess its the mdeejay kernel which is working on hboot 1.31 but as i said gps is not working with it.
Click to expand...
Click to collapse
GPS isn't a biggie pour moi. Okay so when flashing a kernel, I need to flash the .zip first in recovery followed by flashing the boot.img in fastboot? Also I'm on hboot 1.28, not 1.31?
Just flash kernel modules in recovery then fastboot flash boot
Sent from my HTC One X using xda app-developers app
XxVcVxX said:
Just flash kernel modules in recovery then fastboot flash boot
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
So is there any need to flash the ROMs boot.img?
Joshhedge said:
So is there any need to flash the ROMs boot.img?
Click to expand...
Click to collapse
No, but you need to flash the boot.img that comes with the kernel.
Sent from my HTC One X using xda app-developers app
XxVcVxX said:
No, but you need to flash the boot.img that comes with the kernel.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Appreciated, I'll see what I can do. Only been able to find a 1.29 base Kernel, that should work?
Unfortunately I am still stuck at the white HTC screen after repacking the NCX-0.99 kernel. I've also cleared the cache multiple times.
No, there is a custom kernel that works with hboot 1.28+cm10, I believe its somewhere in the dev section.
Sent from my HTC One X using xda app-developers app
try this rom http://forum.xda-developers.com/showthread.php?t=1784185
Stuck on Logo screnn HTC One X
Joshhedge said:
Hi,
I'm new to the ONE X, just switched from the Sensation. I've updated the firmware to 1.28.0000. I can instal all Sense ICS and JB ROMS with no issues but I want CM10, unfortunately I get stuck on the white HTC logo, even after flashing boot.img and erasing cache. What should I do, everything seems so much more confusing on this device!
Josh.
Click to expand...
Click to collapse
I have a similar problem, phone was working fine and then all apps and processes (com.android.process) all crashed. I tried to clear cache data of all programmes crashing and reboot but the problem persisted. I decided that a factory reset might fix the problem but now my phone doesn't get past the logo screen. Any suggestions one how to fix this would be great, I have insurance so should I just get a new phone? Thanks in advance.

[Q] Problems with CM10+Bricked-Kernel v0.7

hey guys.
i'm having some problems with flashing the latest bricked-kernel ( http://forum.xda-developers.com/showthread.php?t=1895214 ).
after flashing the kernel in the recovery, i flashed the boot.img (extracted from the kernel.zip) in fastboot and erased the cache.
but now it won't boot. all i can see is the "htc - quietly brilliant" screen.
help please!
kirkslayer1 said:
hey guys.
i'm having some problems with flashing the latest bricked-kernel ( http://forum.xda-developers.com/showthread.php?t=1895214 ).
after flashing the kernel in the recovery, i flashed the boot.img (extracted from the kernel.zip) in fastboot and erased the cache.
but now it won't boot. all i can see is the "htc - quietly brilliant" screen.
help please!
Click to expand...
Click to collapse
Did you flash the boot.img?
Sent from my HTC One X using XDA Premium HD app
matt95 said:
Did you flash the boot.img?
Sent from my HTC One X using XDA Premium HD app
Click to expand...
Click to collapse
yes, i first flashed the kernel in recovery, restarted the device in fastboot, cleared the cache and flashed boot.img then.
did i forgot sth?
Did you flash the right one? There are two versions. An aosp version and a sense version and I think they're in 2 different threads.
Sent from my HTC One X using xda premium
XxJibblesxX said:
Did you flash the right one? There are two versions. An aosp version and a sense version and I think they're in 2 different threads.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
yes, i did... flashed the one from the link above. ("Bricked-onex_v0.7-aosp.zip")
kirkslayer1 said:
yes, i did... flashed the one from the link above. ("Bricked-onex_v0.7-aosp.zip")
Click to expand...
Click to collapse
wich cm do you use? trips, or nightlies? and if nighlies wich one..
Der_Flooo said:
wich cm do you use? trips, or nightlies? and if nighlies wich one..
Click to expand...
Click to collapse
using cm-10-20121112-NIGHTLY.
i'm on hboot 1.28, if this would be necessary...
did you also flash the zip through recovery to install the modules?
peedub said:
did you also flash the zip through recovery to install the modules?
Click to expand...
Click to collapse
yes, i did.
i'm kind of clueless...
do i have to repack the kernel, etc?
kirkslayer1 said:
using cm-10-20121112-NIGHTLY.
i'm on hboot 1.28, if this would be necessary...
Click to expand...
Click to collapse
For hboots greater than 1.23, you have to repack the zimage in the rom boot.img with a special ramdisk for those hboots prepared by mdeejay, available in the op of the official cm10 thread.
kirkslayer1 said:
do i have to repack the kernel, etc?
Click to expand...
Click to collapse
Always recommended. Not always necessary.
eyosen said:
For hboots greater than 1.23, you have to repack the zimage in the rom boot.img with a special ramdisk for those hboots prepared by mdeejay, available in the op of the official cm10 thread.
Click to expand...
Click to collapse
peedub said:
Always recommended. Not always necessary.
Click to expand...
Click to collapse
thank you, was a good hint. but actually, it's not working for me... (still the same bootloop)
seems like i have to stay on stock kernel.
Happened to me
kirkslayer1 said:
thank you, was a good hint. but actually, it's not working for me... (still the same bootloop)
seems like i have to stay on stock kernel.
Click to expand...
Click to collapse
Yesterday i was in the same situation kinda, I was in bootloop and I couldn't even enter into CWM. All I did was following the instruction in this thread http://forum.xda-developers.com/showthread.php?t=1711000
Amazingly it says I have bricked kernel and I can swipe to wake .

Device not booting after first ROM flash

Hi guys, I am very new to this community and this is my first post. So this is what happened:
I had my One X for about 4 months now, and I was starting to want something new so I rooted it and unlocked the bootloader everything went just fine. So I realized root isn't the only big thing you can do to tweak your device so I wanted to flash a custom ROM. I wanted to customize it so I used this guide: http://forum.xda-developers.com/showthread.php?t=1611349 to customize CMOD 10 based on Jelly Bean and flash it to my device. So I finished my custom ROM and wanted to flash it to my device. So I used this guide: http://forum.xda-developers.com/showthread.php?t=2069904 (post 2 only (of course)).
At first when I tried to flash my custom ROM I didn't make any backup because I had Titanium backup and I thought that it does the same thing as recovery backup (now I know it doesn't) so I don't have the stock ROM on backup. I was disappointed that the device won't boot, it only shows the boot screen "HTC quietly brilliant". And then I saw boot.img I didn't knew what to do with it so I read about it and found out that I need to flash the boot.img before I flash the ROM. So I deleted everything again and done it all over again, but I flashed boot.img that came with the CM 10 first and then flashed the ROM itself. I've done everything correctly and my device still won't boot. It's over 20 minutes and still showing the "HTC quietly brilliant" like before the boot.img.
What should I do and very much thanks for the helpers I don't want to lose my device. :crying:
EDIT: I forgot to mention that this is my first android device.
Try - fastboot erase cache - while in fast boot
Sent from my HTC One X using xda premium
Clean install? Try to clear cache in recovery.
Boot to bootloader (voldown and power). On the top you should see hboot version. What is it?
Also, does fastboot say OKAY when boot.img is flashed?
Sent from my EndeavorU using xda app-developers app
cleancorekiller said:
Try - fastboot erase cache - while in fast boot
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Already tried it. And this is CM10 I downloaded it from their github can't be broken.
THX for the replay BTW.
revolve narytia
TToivanen said:
Clean install? Try to clear cache in recovery.
Boot to bootloader (voldown and power). On the top you should see hboot version. What is it?
Also, does fastboot say OKAY when boot.img is flashed?
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
Already tried to clear cache... A LOT.
HBOOT version is: 1.39.0000
And yes it does say OKAY when boot.img is flashed.
And I already tried clean install a lot.
Okay matey, here's your problem:
You need a special boot.img for your newer hboot version. Check post # 9308 in CM10 thread for link.
Unfortunately GPS doesn't work with this boot.img.
Edit: right post number
Sent from my EndeavorU using xda app-developers app
TToivanen said:
Okay matey, here's your problem:
You need a special boot.img for your newer hboot version. Check post # 1308 in CM10 thread for link.
Unfortunately GPS doesn't work with this boot.img.
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
You are my new god. I will pray for you everyday.
THANK YOU I will report if this will work. Do you know when or where will there be a one with working GPS?
Tomervutx said:
You are my new god. I will pray for you everyday.
THANK YOU I will report if this will work. Do you know when or where will there be a one with working GPS?
Click to expand...
Click to collapse
LOL, just click the thanks button.
Gps will be fixed when slow-ass HTC releases the JB kernel source code. Until then, you can use Trip's CM10 or IceColdJelly 4.2.1 for working GPS.
Sent from my EndeavorU using xda app-developers app
TToivanen said:
LOL, just click the thanks button.
Gps will be fixed when slow-ass HTC releases the JB kernel source code. Until then, you can use Trip's CM10 or IceColdJelly 4.2.1 for working GPS.
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
Mind sharing a link? will save me a lot of time.
link
TToivanen said:
link
Click to expand...
Click to collapse
You saved my life. Thank you again!
TToivanen said:
link
Click to expand...
Click to collapse
It's not working... I clean installed my customized CM10 ROM and then the boot.img you gave me. (I tried vice versa too). It's booting and then restarting to recovery mode.
Probably something went wrong when you customized it. What exactly did you do? Why not just download it as it is?
And when you talked about github.... you mean you built it from source?
TToivanen said:
Probably something went wrong when you customized it. What exactly did you do? Why not just download it as it is?
And when you talked about github.... you mean you built it from source?
Click to expand...
Click to collapse
I did built it form source. I got in a folder 3 files: 2 folders: system and META-INF 3rd file is boot.img.
I probably don't know what to put in update.zip (what folders) would you tell me?
I customized some colors, battery skin on the status bar and fonts. I also customized build.prop and added adrenaline script so I got another folder named "data".
could you tell me how to pack it all to update.zip? I guess my problem is that.
P.S. I also sign it after packing it to update.zip with auto-signer using java.
THX in advance!
Here's one idea: Download the pre built zip of the rom and use it as a template. Replace all the folders inside with your own, custom ones.
Sent from my EndeavorU using xda app-developers app
TToivanen said:
Here's one idea: Download the pre built zip of the rom and use it as a template. Replace all the folders inside with your own, custom ones.
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
I tried it this is the result... Don't you have an experience with ROM building?
Not sure if you understood correctly.
I meant you should dl the rom from get.cm and then replace the files with the ones you built and modified.
If this is exactly what you did, then I'm out of ideas.
I, in fact, haven't built a rom from source in my life.
Sent from my EndeavorU using xda app-developers app
TToivanen said:
Not sure if you understood correctly.
I meant you should dl the rom from get.cm and then replace the files with the ones you built and modified.
If this is exactly what you did, then I'm out of ideas.
I, in fact, haven't built a rom from source in my life.
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
I haven't built it from source. I downloaded the base CM10 mod and edited it's files and compressed and flashed to my device. But I am checking another option.
Why not flash the rom as it is and put your own stuff to system afterwards with adb or an file explorer ?
MeLViN-oNe said:
Why not flash the rom as it is and put your own stuff to system afterwards with adb or an file explorer ?
Click to expand...
Click to collapse
I am editing it with dsixda kitchen and I found out what was my problem... I added Adrenaline script and I need to add support to that through dsixda-android kitchen. Any idea how?

[Q] HELP for [ROM][PRIMOC]RhythmicRom v1.2e

Is it normal that its having a constant reboot for the first 2 hours when i barely downloaded it?
empire10 said:
Is it normal that its having a constant reboot for the first 2 hours when i barely downloaded it?
Click to expand...
Click to collapse
No, are you running a kernel that is incompatible? Radio version? Hboot version?
Gryff302 said:
No, are you running a kernel that is incompatible? Radio version? Hboot version?
Click to expand...
Click to collapse
Im a noob so I don't know which is incompatible but this is the details on the phone
PRIMOC
Hboot-1.57.0000
Radio-1.00.000928
eMMC-boot
Did you flash 1.2d then 1.2e right after? It is compatible with the hboot and radio you have. Flash the boot.img from the 1.2e from the 1.2e zip and it should boot. I imagine that you flashed the 1.2d boot.img. If needed wipe factory reset, system, cache, and dalvik cache, install 1.2d then 1.2e. reboot to fastboot and flash 1.2e boot.img. Should boot fine after that.
empire10 said:
Im a noob so I don't know which is incompatible but this is the details on the phone
PRIMOC
Hboot-1.57.0000
Radio-1.00.000928
eMMC-boot
Click to expand...
Click to collapse
Oh ya i didnt flash the 1.2e so im going to try that one later thank you ?
Be sure to flash the boot.img from 1.2e zip after flashing both 1.2d and 1.2e
Gryff302 said:
Be sure to flash the boot.img from 1.2e zip after flashing both 1.2d and 1.2e
Click to expand...
Click to collapse
Can I install both zips at the same time since I have TWRP
I did what you told me and it WORKED!!! thanks for helping me.Jelly bean looks great
Please hit the thanks button! and Not a problem. Enjoy Jelly Bean. Any problems with the rom should be posted in the Rom's thread.
I did the same thing, same fix, lol
But now I'm messing with the boot animation, and not that it's that big of a deal, but I'm stuck without one from trying to switch using rom toolbox. I think it's a permissions issue. But then again, I ran fix permissions from recovery and no change. Any input on this?
While on this matter, what do the 3 numbers have to do with permissions settings?
Example:
Set permissions to '777' or '644'.
Sent from my One V using xda app-developers app
The three numbers determine whether you get read, write, execute, or all of the above access.
Right, but how does it calculate to be one thing or the other?
sent from My HTC One V running RhythmicRom v1.2e
That is all in the underlying system. I have absolutely no idea how its chosen that way.
Lol ikr?
sent from My HTC One V running RhythmicRom v1.2e
What the right number for turboboost on cache/data/system other then the recommended?
Sent from my One V using xda app-developers app
I'm lost on that one...
Sent from my One V using Tapatalk 2
I would just go with the recommended for turbo boost.
Im catching hell with this rom. I love all the features, but im havng lag/freeze issues like crazy, anr's constantly... Anyone having similar issuues?
sent from my One V running RhythmicRom ...
winning.
(well, most of the time, lol)
Hammerdroid said:
Im catching hell with this rom. I love all the features, but im havng lag/freeze issues like crazy, anr's constantly... Anyone having similar issuues?
sent from my One V running RhythmicRom ...
winning.
(well, most of the time, lol)
Click to expand...
Click to collapse
Actually i have the same lags and freezing like u and i like all the features. It also happens with the launcher which freezes
Hmmmmm launcher freeze..... any apps you think might cause the conflict?

Categories

Resources