Device not booting after first ROM flash - HTC One X

Hi guys, I am very new to this community and this is my first post. So this is what happened:
I had my One X for about 4 months now, and I was starting to want something new so I rooted it and unlocked the bootloader everything went just fine. So I realized root isn't the only big thing you can do to tweak your device so I wanted to flash a custom ROM. I wanted to customize it so I used this guide: http://forum.xda-developers.com/showthread.php?t=1611349 to customize CMOD 10 based on Jelly Bean and flash it to my device. So I finished my custom ROM and wanted to flash it to my device. So I used this guide: http://forum.xda-developers.com/showthread.php?t=2069904 (post 2 only (of course)).
At first when I tried to flash my custom ROM I didn't make any backup because I had Titanium backup and I thought that it does the same thing as recovery backup (now I know it doesn't) so I don't have the stock ROM on backup. I was disappointed that the device won't boot, it only shows the boot screen "HTC quietly brilliant". And then I saw boot.img I didn't knew what to do with it so I read about it and found out that I need to flash the boot.img before I flash the ROM. So I deleted everything again and done it all over again, but I flashed boot.img that came with the CM 10 first and then flashed the ROM itself. I've done everything correctly and my device still won't boot. It's over 20 minutes and still showing the "HTC quietly brilliant" like before the boot.img.
What should I do and very much thanks for the helpers I don't want to lose my device. :crying:
EDIT: I forgot to mention that this is my first android device.

Try - fastboot erase cache - while in fast boot
Sent from my HTC One X using xda premium

Clean install? Try to clear cache in recovery.
Boot to bootloader (voldown and power). On the top you should see hboot version. What is it?
Also, does fastboot say OKAY when boot.img is flashed?
Sent from my EndeavorU using xda app-developers app

cleancorekiller said:
Try - fastboot erase cache - while in fast boot
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Already tried it. And this is CM10 I downloaded it from their github can't be broken.
THX for the replay BTW.

revolve narytia
TToivanen said:
Clean install? Try to clear cache in recovery.
Boot to bootloader (voldown and power). On the top you should see hboot version. What is it?
Also, does fastboot say OKAY when boot.img is flashed?
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
Already tried to clear cache... A LOT.
HBOOT version is: 1.39.0000
And yes it does say OKAY when boot.img is flashed.
And I already tried clean install a lot.

Okay matey, here's your problem:
You need a special boot.img for your newer hboot version. Check post # 9308 in CM10 thread for link.
Unfortunately GPS doesn't work with this boot.img.
Edit: right post number
Sent from my EndeavorU using xda app-developers app

TToivanen said:
Okay matey, here's your problem:
You need a special boot.img for your newer hboot version. Check post # 1308 in CM10 thread for link.
Unfortunately GPS doesn't work with this boot.img.
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
You are my new god. I will pray for you everyday.
THANK YOU I will report if this will work. Do you know when or where will there be a one with working GPS?

Tomervutx said:
You are my new god. I will pray for you everyday.
THANK YOU I will report if this will work. Do you know when or where will there be a one with working GPS?
Click to expand...
Click to collapse
LOL, just click the thanks button.
Gps will be fixed when slow-ass HTC releases the JB kernel source code. Until then, you can use Trip's CM10 or IceColdJelly 4.2.1 for working GPS.
Sent from my EndeavorU using xda app-developers app

TToivanen said:
LOL, just click the thanks button.
Gps will be fixed when slow-ass HTC releases the JB kernel source code. Until then, you can use Trip's CM10 or IceColdJelly 4.2.1 for working GPS.
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
Mind sharing a link? will save me a lot of time.

link

TToivanen said:
link
Click to expand...
Click to collapse
You saved my life. Thank you again!

TToivanen said:
link
Click to expand...
Click to collapse
It's not working... I clean installed my customized CM10 ROM and then the boot.img you gave me. (I tried vice versa too). It's booting and then restarting to recovery mode.

Probably something went wrong when you customized it. What exactly did you do? Why not just download it as it is?
And when you talked about github.... you mean you built it from source?

TToivanen said:
Probably something went wrong when you customized it. What exactly did you do? Why not just download it as it is?
And when you talked about github.... you mean you built it from source?
Click to expand...
Click to collapse
I did built it form source. I got in a folder 3 files: 2 folders: system and META-INF 3rd file is boot.img.
I probably don't know what to put in update.zip (what folders) would you tell me?
I customized some colors, battery skin on the status bar and fonts. I also customized build.prop and added adrenaline script so I got another folder named "data".
could you tell me how to pack it all to update.zip? I guess my problem is that.
P.S. I also sign it after packing it to update.zip with auto-signer using java.
THX in advance!

Here's one idea: Download the pre built zip of the rom and use it as a template. Replace all the folders inside with your own, custom ones.
Sent from my EndeavorU using xda app-developers app

TToivanen said:
Here's one idea: Download the pre built zip of the rom and use it as a template. Replace all the folders inside with your own, custom ones.
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
I tried it this is the result... Don't you have an experience with ROM building?

Not sure if you understood correctly.
I meant you should dl the rom from get.cm and then replace the files with the ones you built and modified.
If this is exactly what you did, then I'm out of ideas.
I, in fact, haven't built a rom from source in my life.
Sent from my EndeavorU using xda app-developers app

TToivanen said:
Not sure if you understood correctly.
I meant you should dl the rom from get.cm and then replace the files with the ones you built and modified.
If this is exactly what you did, then I'm out of ideas.
I, in fact, haven't built a rom from source in my life.
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
I haven't built it from source. I downloaded the base CM10 mod and edited it's files and compressed and flashed to my device. But I am checking another option.

Why not flash the rom as it is and put your own stuff to system afterwards with adb or an file explorer ?

MeLViN-oNe said:
Why not flash the rom as it is and put your own stuff to system afterwards with adb or an file explorer ?
Click to expand...
Click to collapse
I am editing it with dsixda kitchen and I found out what was my problem... I added Adrenaline script and I need to add support to that through dsixda-android kitchen. Any idea how?

Related

No Wifi or Service after installing ROM

My phone wouldn't boot up so i had some advice from a member of these forums, he asked me to install this http://forum.xda-developers.com/showthread.php?t=1767927 After doing so it successfully fixed my device but now cant get any wifi or service, tried rebooting as of now. anyone help me ?
ryanlj1995 said:
My phone wouldn't boot up so i had some advice from a member of these forums, he asked me to install this http://forum.xda-developers.com/showthread.php?t=1767927 After doing so it successfully fixed my device but now cant get any wifi or service, tried rebooting as of now. anyone help me ?
Click to expand...
Click to collapse
That rom is for PrimoC is your phone the CDMA version or the PrimoU (GSM)?
If yours is a primoU then you cannot use the C's ROMS on your phone (will do exactly the same things you write down here). Try this instead. It is the same ROM just for GSM.
his is cdma
he used correct rom
method wrong or problems with rom
contact shubhamchamaria in the rom thread
a true lfc supporter
and a former symbian lover
sent from my awesome HTC One V using xda premium
SUPPORT THE SOFTWARE DEVELOPER'S IF YOU LIKE THE GAME / APP BUY IT
ryanlj1995 said:
My phone wouldn't boot up so i had some advice from a member of these forums, he asked me to install this http://forum.xda-developers.com/showthread.php?t=1767927 After doing so it successfully fixed my device but now cant get any wifi or service, tried rebooting as of now. anyone help me ?
Click to expand...
Click to collapse
i just replied on your other thread...but no biggie...
route A
have you got the custom kernel installed (titanium) if so remove it, as it's not compatible with CDMA phones, and flash the stock boot.img for the VM\CDMA phone...then reinstall a rom..
Route B
there could be something up with the custom rom so try this one out, http://themikmik.com/showthread.php...e-V-Stock-ROM-Deodex-Odex&p=236726#post236726
odex for quicker boot, deodex for better long term performance
Hi
Lloir said:
have you got the custom kernel installed (titanium) if so remove it, as it's not compatible with CDMA phones, and flash the stock boot.img for the VM\CDMA phone...then reinstall a rom..
Click to expand...
Click to collapse
In am just curious about this diff
Do you have more information?
Or can someone point me to a place where I can get the kernel
sources for a CDMA HTC One V?
Regards
max
maxwen said:
Hi
In am just curious about this diff
Do you have more information?
Or can someone point me to a place where I can get the kernel
sources for a CDMA HTC One V?
Regards
max
Click to expand...
Click to collapse
no CDMA kernel yet....the difference's are the sound and a few other things
Lloir said:
no CDMA kernel yet....the difference's are the sound and a few other things
Click to expand...
Click to collapse
Just flash the boot.img from rom.zip and that will fix it!
Lloir said:
no CDMA kernel yet....the difference's are the sound and a few other things
Click to expand...
Click to collapse
Ok. Just FYI
If I can get my hands on the kernel sources I gues
I can provide a KISS kernel build very soon afterwards.
Just keep me informed
Thanks
max
Lloir said:
i just replied on your other thread...but no biggie...
route A
have you got the custom kernel installed (titanium) if so remove it, as it's not compatible with CDMA phones, and flash the stock boot.img for the VM\CDMA phone...then reinstall a rom..
Route B
there could be something up with the custom rom so try this one out, http://themikmik.com/showthread.php...e-V-Stock-ROM-Deodex-Odex&p=236726#post236726
odex for quicker boot, deodex for better long term performance
Click to expand...
Click to collapse
thanks for your replies, im going to try both roms mentioned and going to put stock kernal back on it. ill post my results later. thanks again
shubhamchamaria said:
Just flash the boot.img from rom.zip and that will fix it!
Click to expand...
Click to collapse
i keep forgetting about that -.- been on devices w\out boot.img needed for so long lol
Lloir said:
i keep forgetting about that -.- been on devices w\out boot.img needed for so long lol
Click to expand...
Click to collapse
The rom you just posted, i just tested, Wi0Fi seems to be working alright, but still i have no service, air plane mode is off aswell, i just dont get any bars whatsoever.
ryanlj1995 said:
The rom you just posted, i just tested, Wi0Fi seems to be working alright, but still i have no service, air plane mode is off aswell, i just dont get any bars whatsoever.
Click to expand...
Click to collapse
in the .zip look for a boot.img extract it and flash it in fastboot buddy
Lloir said:
in the .zip look for a boot.img extract it and flash it in fastboot buddy
Click to expand...
Click to collapse
Ok, i cant install anything with adb/fasboot(commands), it either gives error device not found or waiting for device, im on windows 7 64-bit, and normally use htc one v aio tool which works perfect, any ideas ?
EDIT: Just tried the stock rom, it gives me no wifi but mobile service WTF lol -.-
ryanlj1995 said:
Ok, i cant install anything with adb/fasboot(commands), it either gives error device not found or waiting for device, im on windows 7 64-bit, and normally use htc one v aio tool which works perfect, any ideas ?
Click to expand...
Click to collapse
try this: http://forum.xda-developers.com/showthread.php?t=1747168
please read readme.txt
shubhamchamaria said:
try this: http://forum.xda-developers.com/showthread.php?t=1747168
please read readme.txt
Click to expand...
Click to collapse
Ok first of all, great tool, simple and easy BUT when i do flash my boot.img i still have no service
IF i stay on the rom now i have wifi but no service, if i return to stock i have mobile service and no wifi, so it isn't hardware. this is strange :S, and im new to all this stuff really.
Lloir said:
in the .zip look for a boot.img extract it and flash it in fastboot buddy
Click to expand...
Click to collapse
Just tried but same again its either WiFi or mobile service I'm on virgin if that help
Sent from my HTC One V using xda app-developers app
I think I don't have a radio installed can you link me, if you need any info ill provide.
Sent from my HTC One V using xda app-developers app
ryanlj1995 said:
I think I don't have a radio installed can you link me, if you need any info ill provide.
Sent from my HTC One V using xda app-developers app
Click to expand...
Click to collapse
flash stock recovery from ruu using my tool ...
install stock kernel from ruu through my tool again..
then in fastboot type "fastboot oem lock" and then flash ruu!
that should fix all problems!
shubhamchamaria said:
flash stock recovery from ruu using my tool ...
install stock kernel from ruu through my tool again..
then in fastboot type "fastboot oem lock" and then flash ruu!
that should fix all problems!
Click to expand...
Click to collapse
Soorry but can you explain what you mean by flashing ruu, i forgot :S

[How to] Boot ALL Jellybean sense roms on cid unsupported devices

General Information
Since everything here is on fire because of the sense jellybean leaked firmware and many are crying that they do not have the appropriate CID to flash the new firmware, and some also replied to my post they are not able to boot with that UNOFFICAL and BETA METHOD i decided to write this short guide.
At first, i do not think that the rom flashed with this method is working as a daily for you, more a preview for when the devs found a way to bring the update also to carrier branded phones.
Things that are reported to work with trips 3.4.11 kernel but not with his 3.1.10 kernel are:
- Usb storage ( )
Things that will not work are:
- Sound
- Youtube App
- Wifi Dropouts, not for me but another person mentioned it
This method does not update your hboot. So you´re safe to go back. And one more time, this is just meant as a preview for now, so dont expect the full jellybean experience. be lucky that we have trip and can at least boot this
So here will be the general instructions for all jellybean sense roms.
1. Download your favourite jellybean sense rom and put it on your sdcard
A few of them:
ARHD: http://forum.xda-developers.com/showthread.php?t=1562603 (not available for now)
IC: http://forum.xda-developers.com/showthread.php?t=1588669
Maximus: http://forum.xda-developers.com/showthread.php?t=1601543
Ordroid: http://forum.xda-developers.com/showthread.php?t=1836919
2. Download trips kernel from here: http://tripndroid.bindroidroms.com/TripNDroid_RVISED_3.4.11-002.zip put one copy on your phones sdcard and one on your pc
3. Repack trips boot.img found in the previously downloaded .zip with the ramdisk from the kernel which is included in your rom that you downloaded in the first step using this nice little tool: http://forum.xda-developers.com/showthread.php?t=1815607
Put the repacked boot.img in your fastboot folder
4. Boot your phone into fastboot mode and flash the repacked boot.img you downloaded using following commands
------> fastboot flash boot boot.img
------> fastboot erase cache
5. after this boot into custom recovery and perform a full wipe (including system, data, cache, dalvik)
6. flash your rom (just in case: tick none of the options in aroma)
7. flash modules from trips kernel which you placed in step 2 on your sdcard
8. boot into your jellybean preview.
Credits to shnizlon for the rom, to TripNRaVeR for his 3.1.10 kernel that offers this possibility , finally to chrisoverson for online repacker
I´m not responsible for anything you do to your phone!
hi
im on CID 38 it is not supported as of now
by doing ur process u mean i can flash any of the JB roms
kindly tell me if the process done right it its ok
as i dont wana brick my phone cant afford another one as of now
can u kindly confirm that u have done it and it works:good:
Anyone have try it.. still waiting
Sent from my HTC One X using xda premium
it work ! Wifi work with screen on.
haree said:
hi
im on CID 38 it is not supported as of now
by doing ur process u mean i can flash any of the JB roms
kindly tell me if the process done right it its ok
as i dont wana brick my phone cant afford another one as of now
can u kindly confirm that u have done it and it works:good:
Click to expand...
Click to collapse
Hi a few people have confirmed that it works, but there are some bugs as stated in the op, so you can give it a try to see what all the fuss is about and so that you don't have to feel totally left out, but currently it can't really be used as a daily driver
bernyfur said:
it work ! Wifi work with screen on.
Click to expand...
Click to collapse
Are sure? Did you try it?
Sent from my HTC One X using xda premium
Already try it one the day 2.0.0 out.. but the most i hate is no in call sound.
about sd bug, I think it is because of vold.fstab, as the sd mount is different as ICS, that why it not detected in JB.
I tried this last night, and YES it does work.
However it's pretty unusable and i ended up flashing back to viperX. Still it was nice to sample Jelly Bean.
I'm on T-MOB005 UK
iamaniff said:
Are sure? Did you try it?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Every JB sense rom boot using trip kernel, just repack it and flash.. Already try all JB ROM, but no fun for me, as it is too buggy for unsupported CID.
@OP : Why don't you change the thread to "how to flash Sense JB on unsupported CID device" as it could boot all JB Sense ROM.
haree said:
hi
im on CID 38 it is not supported as of now
by doing ur process u mean i can flash any of the JB roms
kindly tell me if the process done right it its ok
as i dont wana brick my phone cant afford another one as of now
can u kindly confirm that u have done it and it works:good:
Click to expand...
Click to collapse
iamaniff said:
Anyone have try it.. still waiting
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
iamaniff said:
Are sure? Did you try it?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
i did it exactly as i described in the op yesterday in the evening and there were the bugs i explained above
your hboot is not upgraded while youre doing this procedure so you can easily flash back
and i also mentioned it´s most likely only for preview!
I try it my cid is t-mob101 and it work Sense jelly bean is nice but i have the Radio Bug..it works only if the screen is on...when it is locked and i turn it on i have Signal Bars but in lockscreen it shows no signal...it is Bad...but the hole rom is nice ..i hope someone fix the bugs
Sent from my HTC One X using xda premium
Stay with ics :thumbup:
Sent from my HTC One X using xda premium
nashshafrulrezza said:
Every JB sense rom boot using trip kernel, just repack it and flash.. Already try all JB ROM, but no fun for me, as it is too buggy for unsupported CID.
@OP : Why don't you change the thread to "how to flash Sense JB on unsupported CID device" as it could boot all JB Sense ROM.
Click to expand...
Click to collapse
it could but the boot.img i provided is only for ordroid. i don´t think it will boot with insertcoin or arhd as they made custom ramdisk modifications. But you´re right, basically if you repack trips kernel with the jb sense roms kernel ramdisk it will boot i think
I will update the thread in the evening i´m busy now because i have to break up my grandmother´s garden that sounds funny and i hope it´s correct
iamaniff said:
Are sure? Did you try it?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
yes ! jb is amazing!
Freak07 said:
i did it exactly as i described in the op yesterday in the evening and there were the bugs i explained above
your hboot is not upgraded while youre doing this procedure so you can easily flash back
and i also mentioned it´s most likely only for preview!
Click to expand...
Click to collapse
hi
thanks for ur kind reply :good::laugh:
as i have just got my official 2.17 india and i cant fine the ruu or the stock recovery for this rom i think i wont take my chances now and wait for the above or the Off JB update :laugh:
bernyfur said:
yes ! jb is amazing!
Click to expand...
Click to collapse
Sent from my HTC One X using xda premium
haree said:
hi
thanks for ur kind reply :good::laugh:
as i have just got my official 2.17 india and i cant fine the ruu or the stock recovery for this rom i think i wont take my chances now and wait for the above or the Off JB update :laugh:
Click to expand...
Click to collapse
why you need RUU or stock recovery? This is the same way to flash custom rom with our own choice kernel.
nashshafrulrezza said:
why you need RUU or stock recovery? This is the same way to flash custom rom with our own choice kernel.
Click to expand...
Click to collapse
Precise! Just make nandroid, follow my instructions, and afterwards Flash Boot.img from your nandroid and restore your nandroid
Sent from my HTC One X using xda premium
Freak07 said:
Precise! Just make nandroid, follow my instructions, and afterwards Flash Boot.img from your nandroid and restore your nandroid
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
hi
now the stock recovrey av right now is 1.29
after i do the nand flash of the 2.17 off i need the stock recovery for this one right the above wont work right ie if i want to go back to stock and get the offcial OTA when it does come do correct me if im wrong
haree - What state is your phone in now? i.e. Is your bootloader unlocked?

[Q] Problems with CM10+Bricked-Kernel v0.7

hey guys.
i'm having some problems with flashing the latest bricked-kernel ( http://forum.xda-developers.com/showthread.php?t=1895214 ).
after flashing the kernel in the recovery, i flashed the boot.img (extracted from the kernel.zip) in fastboot and erased the cache.
but now it won't boot. all i can see is the "htc - quietly brilliant" screen.
help please!
kirkslayer1 said:
hey guys.
i'm having some problems with flashing the latest bricked-kernel ( http://forum.xda-developers.com/showthread.php?t=1895214 ).
after flashing the kernel in the recovery, i flashed the boot.img (extracted from the kernel.zip) in fastboot and erased the cache.
but now it won't boot. all i can see is the "htc - quietly brilliant" screen.
help please!
Click to expand...
Click to collapse
Did you flash the boot.img?
Sent from my HTC One X using XDA Premium HD app
matt95 said:
Did you flash the boot.img?
Sent from my HTC One X using XDA Premium HD app
Click to expand...
Click to collapse
yes, i first flashed the kernel in recovery, restarted the device in fastboot, cleared the cache and flashed boot.img then.
did i forgot sth?
Did you flash the right one? There are two versions. An aosp version and a sense version and I think they're in 2 different threads.
Sent from my HTC One X using xda premium
XxJibblesxX said:
Did you flash the right one? There are two versions. An aosp version and a sense version and I think they're in 2 different threads.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
yes, i did... flashed the one from the link above. ("Bricked-onex_v0.7-aosp.zip")
kirkslayer1 said:
yes, i did... flashed the one from the link above. ("Bricked-onex_v0.7-aosp.zip")
Click to expand...
Click to collapse
wich cm do you use? trips, or nightlies? and if nighlies wich one..
Der_Flooo said:
wich cm do you use? trips, or nightlies? and if nighlies wich one..
Click to expand...
Click to collapse
using cm-10-20121112-NIGHTLY.
i'm on hboot 1.28, if this would be necessary...
did you also flash the zip through recovery to install the modules?
peedub said:
did you also flash the zip through recovery to install the modules?
Click to expand...
Click to collapse
yes, i did.
i'm kind of clueless...
do i have to repack the kernel, etc?
kirkslayer1 said:
using cm-10-20121112-NIGHTLY.
i'm on hboot 1.28, if this would be necessary...
Click to expand...
Click to collapse
For hboots greater than 1.23, you have to repack the zimage in the rom boot.img with a special ramdisk for those hboots prepared by mdeejay, available in the op of the official cm10 thread.
kirkslayer1 said:
do i have to repack the kernel, etc?
Click to expand...
Click to collapse
Always recommended. Not always necessary.
eyosen said:
For hboots greater than 1.23, you have to repack the zimage in the rom boot.img with a special ramdisk for those hboots prepared by mdeejay, available in the op of the official cm10 thread.
Click to expand...
Click to collapse
peedub said:
Always recommended. Not always necessary.
Click to expand...
Click to collapse
thank you, was a good hint. but actually, it's not working for me... (still the same bootloop)
seems like i have to stay on stock kernel.
Happened to me
kirkslayer1 said:
thank you, was a good hint. but actually, it's not working for me... (still the same bootloop)
seems like i have to stay on stock kernel.
Click to expand...
Click to collapse
Yesterday i was in the same situation kinda, I was in bootloop and I couldn't even enter into CWM. All I did was following the instruction in this thread http://forum.xda-developers.com/showthread.php?t=1711000
Amazingly it says I have bricked kernel and I can swipe to wake .

Radio 1.00.00.0928

After a bunch of digging around these and other forums. It seems that there is not much that can be done with custom roms on the VM CDMA phone with Radio 1.00.00.0928 (other than the codefire X one)? I attempted to downgrade the radio version but ended up with a "HBOOT is older" error.
Thanks.
try these:
http://forum.xda-developers.com/showthread.php?t=1943029
http://forum.xda-developers.com/showthread.php?t=2245170
http://forum.xda-developers.com/showthread.php?t=2147407 (not too sure about this one but definitely the middle link should be what you want)
Thanks. I'll try those.
nalgene said:
Thanks. I'll try those.
Click to expand...
Click to collapse
No problem, let me know if you need anything just pm me
I'm using the Rhythmic ROM with the updated radio. Works fine me
Sent from my One V using xda app-developers app
myOneV9.5+CDMA with the modules and kernel posted in its thread from russellonev and Duir also works.
Gryff302 said:
myOneV9.5+CDMA with the modules and kernel posted in its thread from russellonev and Duir also works.
Click to expand...
Click to collapse
They will work with all of the sense roms.
myOne
x3reme
Angry
XPERIA One
jmz stock odex
jmz stock deodex
simonsimons34
jmzOneV
ect, ect, ect........
http://forum.xda-developers.com/showthread.php?p=40982649
:thumbup: go check it out
Thanks for the suggestions everyone.
All of these ROM/KERNEL combinations seem end up causing reboot loops. If I flash the FOTA-Compatible Sick Kernel and the included boot.img it freezes at the "HTC quietly brilliant" screen with the bootloader disclaimer.
Cheers.
Just use rhythmic ROM. It works fine for me
Sent from my One V using xda app-developers app
FatBoy_Seconds said:
Just use rhythmic ROM. It works fine for me
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
With what Kernel?
The one it comes with. Get rhythmic ROM 1.2D, get the OTA update. Zip and the 1.2e.zip. Flash the ROM, then ota update.zip then the 1.2e.zip. then fast boot flash the boot.IMG. if you do it in the right order. It will work. Trust me
Sent from my One V using xda app-developers app
FatBoy_Seconds said:
The one it comes with. Get rhythmic ROM 1.2D, get the OTA update. Zip and the 1.2e.zip. Flash the ROM, then ota update.zip then the 1.2e.zip. then fast boot flash the boot.IMG. if you do it in the right order. It will work. Trust me
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
I'm going to try this but I'm having trouble finding the OTA update.zip
nalgene said:
I'm going to try this but I'm having trouble finding the OTA update.zip
Click to expand...
Click to collapse
Is this it here :
http://www.androidmodmarket.com/ModMarket/Listings/XDA-L-2147407.html
Fatboy_seconds method worked form me. The OTA Update fix is here :
OTA FIX
I flashed the boot.img from the above fix using fastboot as the final step.
Cheers.
So it works pretty flawless right?
FatBoy_Seconds said:
So it works pretty flawless right?
Click to expand...
Click to collapse
I'm find that there are sometimes the audio will go all crackly when some other application interrupts an audio stream. Other than that, it's working just fine.
That happens to me occasionally also
Sent from my One V using xda app-developers app
nalgene said:
I'm find that there are sometimes the audio will go all crackly when some other application interrupts an audio stream. Other than that, it's working just fine.
Click to expand...
Click to collapse
I wonder why the FOTA kernel that -DUIR- posted didn't work for you? did you fastboot flash the boot.img from his kernel?
lilrob1213 said:
I wonder why the FOTA kernel that -DUIR- posted didn't work for you? did you fastboot flash the boot.img from his kernel?
Click to expand...
Click to collapse
So, today I flashed my original restored using CWM recovery and flashed my original kernel from there as well.
I then did a full wipe and installed AngryHTC and flashed the boot.img included with the ROM. ---> Reboot Loop.
I then flashed the boot.img from my CWM backup ( I assume this is the kernel ) ----> ROM boots but no wifi
I then flashed the FOTA kernel (which no longer includes a zip, only the boot.img) ---> Everything works
I honestly don't know why it wasn't working before, maybe the wrong combination of flashes or in the wrong order. I will try with some other ROMS when I get a bit of time to mess around with it.
It's great that there's this very helpful support system here.
Cheers.
nalgene said:
So, today I flashed my original restored using CWM recovery and flashed my original kernel from there as well.
I then did a full wipe and installed AngryHTC and flashed the boot.img included with the ROM. ---> Reboot Loop.
I then flashed the boot.img from my CWM backup ( I assume this is the kernel ) ----> ROM boots but no wifi
I then flashed the FOTA kernel (which no longer includes a zip, only the boot.img) ---> Everything works
I honestly don't know why it wasn't working before, maybe the wrong combination of flashes or in the wrong order. I will try with some other ROMS when I get a bit of time to mess around with it.
It's great that there's this very helpful support system here.
Cheers.
Click to expand...
Click to collapse
The FOTA boot.img is for sense based ROMs and only works with the newest radio and hboot
Sent from my One V using xda app-developers app

Custom Recovery and Rom

If you want a custom recovery and rom and you just unlocked your bootloader go here:
http://androidhosting.org/Devs/Dhacker29/msm8960/
Download and Flash:
XT901-XT907-TWRP-2.6.3.0-recovery.img
and
cm-11-20140615-UNOFFICIAL-RAZR-HD_M-KITKAT-TEST
and enjoy.
--
ERK
Any way to flash the recovery without a PC?
Sent from my XT907 using XDA Free mobile app
ezknives said:
Any way to flash the recovery without a PC?
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
or
https://play.google.com/store/apps/details?id=com.cgollner.flashify
As always thank you kindly ATTACK...
Sent from my XT907 using XDA Free mobile app
Wich one of those did you use?
And did it work? Can we use rom manager?
Sent from my XT907 using XDA Free mobile app
The first one with twrp 2.7... Worked fine for me...
Sent from my XT907 using XDA Free mobile app
I can't seem to reboot into recovery correctly. Every attempt just lands me back in the stock firmware. Rebooting from there to recovery via adb just gives me the Motorola warning.
Strife89 said:
I can't seem to reboot into recovery correctly. Every attempt just lands me back in the stock firmware. Rebooting from there to recovery via adb just gives me the Motorola warning.
Click to expand...
Click to collapse
This is what I use
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot
ATTACK said:
This is what I use
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot
Click to expand...
Click to collapse
No dice. Rebooting to recovery even with that just leaves me staring at the boot image.
EDIT: I remember reading that those who took the KitKat OTA got a different boot image that makes going back to Jellybean difficult, if not impossible. Could that have anything to do with this?
Strife89 said:
No dice. Rebooting to recovery even with that just leaves me staring at the boot image.
EDIT: I remember reading that those who took the KitKat OTA got a different boot image that makes going back to Jellybean difficult, if not impossible. Could that have anything to do with this?
Click to expand...
Click to collapse
Which recovery are you flashing? It should read TWRP2710-RAZR_M-KITKAT.img.
ATTACK said:
Which recovery are you flashing? It should read TWRP2710-RAZR_M-KITKAT.img.
Click to expand...
Click to collapse
Bah, pay me no mind. I was trying to flash a CWM recovery because that's what I'm familiar with. I tried the one you just named and it works fine.
Sorry about that!
Just an FYI I couldn't get rashr to even look for the file so I tried flashify and it installed recovery with ease.
Thanks for the links attack. I don't like to try these flashing apks without a recommendation.
Sent from my XT907 using XDA Free mobile app
Strife89 said:
I can't seem to reboot into recovery correctly. Every attempt just lands me back in the stock firmware. Rebooting from there to recovery via adb just gives me the Motorola warning.
Click to expand...
Click to collapse
Are you Fastboot flashing?
Guys KEEP IN MIND:
These are not officials, these are fairly beta builds. You will get errors, I was hoping this would reach some crack-flashers.
That's basically who this is for.
ericerk said:
Guys KEEP IN MIND:
These are not officials, these are fairly beta builds. You will get errors, I was hoping this would reach some crack-flashers.
That's basically who this is for.
Click to expand...
Click to collapse
How can we get onto official CM then?
I know it has something to do with the kernel. We can't downgrade the kernel to the one CM is using? Or we have to wait until CM move up to kernel 3.4?
gtmaster303 said:
How can we get onto official CM then?
I know it has something to do with the kernel. We can't downgrade the kernel to the one CM is using? Or we have to wait until CM move up to kernel 3.4?
Click to expand...
Click to collapse
The latest Nightly is from February, which is 4.4.2.
Honestly keep checking that website, and check XDA.
Since the bootloader has been unlocked there should be a lot of movement / action in the dev section.
I would honestly not flash anything older, I mean feel free to mess around w/ kernel that are newer than 4.4.2 on CM.
I can't promise anything if you're on stock. I hope that helped at least a bit.
Didn't think this deserved its own thread, but could someone on 4.4.2 upload their systemui.apk real quick?
Sent from my One using XDA Premium 4 mobile app
Leraeniesh said:
Didn't think this deserved its own thread, but could someone on 4.4.2 upload their systemui.apk real quick?
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Odexed or Deodexed?
Here's a Deodexed SystemUI
I'm unable to boot official CM 11, yes i flashed it with TWRP2710-RAZR_M-KITKAT recovery i also try mokee 4.4.3 but same stuck on bootloader.
ericerk said:
Are you Fastboot flashing?
Click to expand...
Click to collapse
I was, but in the end I followed @ATTACK 's advice and used the apps from the Play Store. My impatience and forgetfulness caused me to butt my head against a metaphorical brick wall a few times, but I managed.

Categories

Resources