Develop Bugs

[Q] Do I need to take out clockwork to update stock? How to flash original recovery??

SGH-T999, stock t999uvdlja
A month or two ago, I followed a rooting instructions thread on here. It had me use odin to flash over a clockwork recovery mod as the first step. It flashed over fine according to odin, but I was never able to enter recovery following the next steps and therefore was not able to root. I can't find the thread anymore.
I realized after the fact that my phone was already on Jellybean, so I presume, maybe wrongly, that the reason the clockwork mod wouldn't work was because it was for the older Ice cream sandwich firmware.
Anyway, now my phone says unable to update because it's modified when I go into settings:about:software updates.
I want to get this error to go away. I have kies and there is now a firmware update in there that I would like to do to see if it fixes a problem with the wifi calling app breaking caller id among other things.
I am afraid that if I try to push this update via kies, it may brick the phone or not work thanks to the clockwork mod problem.
So two questions: 1) how can I un-flash that clockwork mod out of there and make the recovery back to stock so there is no further error or possible warranty issue, and 2) is it safe to do that kies firmware update and if so would that fix the recovery on its own?

Any ideas?
Sent from my SGH-T999 using xda app-developers app

You need to find the stock recovery .tar file and use odin to flash it the same way you flashed the cwm recovery. Then you will probably need to use triangle away to reset the counter.....dont think kies would work if it sees your device is modified but not sure about that.

Use triangle away first to reset your flash counter then odin the completly stock jb from here http://www.androidfilehost.com/?fid=9390169635556426424....this is from docholidays thread for stock odin roms in the sticky section of development. ..this should give you a completely stock phone including recovery.....you will lose your data from this process but your sd card will be fine.
Edit: just realized you dont have root...you need root to use triangle away....so first odin root 66 pre root stock rom....then use triangle away....then odin stock unrooted rom that I linked above.
Sent from my SGH-T999 using xda premium

Question about rooting with odin

I recently took the ota update to 4.1.2 mb1 and lost root. My question is can I use odin to flash [ROM|Stock Rooted] 3/3/13 Sprint Touchwiz Jelly Bean 4.1.2 (L710VPBMB1) Odex/DeOdex? And If so do I use the full ROM odex? And Do I have to flash anything besides the ROM? Or can I keep everything else stock?

Monoclypsus said:
I recently took the ota update to 4.1.2 mb1 and lost root. My question is can I use odin to flash [ROM|Stock Rooted] 3/3/13 Sprint Touchwiz Jelly Bean 4.1.2 (L710VPBMB1) Odex/DeOdex? And If so do I use the full ROM odex? And Do I have to flash anything besides the ROM? Or can I keep everything else stock?
Click to expand...
Click to collapse
Hey there buddy, welcome to XDA (I see this is your second post).
Anyways, do you still have a custom recovery? I'm assuming you don't, since it sounds like you went all the way back to stock unrooted in order o get the update (in the future, Freeza typically has the update for Root users a week or so after the OTA release, so no need to go back to stock unrooted).
Anyways, back to your current situation. Since you most-likely have the stock recovery, you'll have to go back to being rooted with either CWM or TWRP (I prefer TWRP, but they're both good). I personally use mskip's toolkit, it's fairly straightforward. You could also follow qbking77's rooting method. He does a good job explaining how to root. Samsung hasn't locked their bootloader and don't try to in their updates, so these rooting methods stand the test of time (and updates).
Once you have a custom recovery installed (or if you already have one installed), FIRST THING to do is perform a nandroid backup. THIS IS KEY. Once you have one done, go ahead and flash Freeza's Stock Rooted ROM. I'd recommend doing a clean flash, as it's the best way to minimize the chances of errors and bugs. Just wipe system and cache and dalvik cache, and then flash the downloaded ROM. And speaking of downloading, be sure to check the md5 sum of the download before you flash. Most problems with the stable ROMs here on XDA stem from bad downloads.
You can also check out other ROMs. I won't go too crazy on advertising here, but scroll through these two sub-forums, Android Development and Original Android Development. I've enjoyed most ROMs I've tried.
Hope this helps!

ok
topherk said:
Hey there buddy, welcome to XDA (I see this is your second post).
Anyways, do you still have a custom recovery? I'm assuming you don't, since it sounds like you went all the way back to stock unrooted in order o get the update (in the future, Freeza typically has the update for Root users a week or so after the OTA release, so no need to go back to stock unrooted).
Anyways, back to your current situation. Since you most-likely have the stock recovery, you'll have to go back to being rooted with either CWM or TWRP (I prefer TWRP, but they're both good). I personally use mskip's toolkit, it's fairly straightforward. You could also follow qbking77's rooting method. He does a good job explaining how to root. Samsung hasn't locked their bootloader and don't try to in their updates, so these rooting methods stand the test of time (and updates).
Once you have a custom recovery installed (or if you already have one installed), FIRST THING to do is perform a nandroid backup. THIS IS KEY. Once you have one done, go ahead and flash Freeza's Stock Rooted ROM. I'd recommend doing a clean flash, as it's the best way to minimize the chances of errors and bugs. Just wipe system and cache and dalvik cache, and then flash the downloaded ROM. And speaking of downloading, be sure to check the md5 sum of the download before you flash. Most problems with the stable ROMs here on XDA stem from bad downloads.
You can also check out other ROMs. I won't go too crazy on advertising here, but scroll through these two sub-forums, Android Development and Original Android Development. I've enjoyed most ROMs I've tried.
Hope this helps!
Click to expand...
Click to collapse
Ok, just out of curiousity... Before I took the OTA i was rooted 4.1.1 stock with stock recovery. Is there any way to do it the same? The method I used before was this [HOWTO] [ROOT] No Tripping Flash Counter [SPR L710VPBLJ7] JB 4.1.1. It was super quick and easy.

Monoclypsus said:
Ok, just out of curiousity... Before I took the OTA i was rooted 4.1.1 stock with stock recovery. Is there any way to do it the same? The method I used before was this [HOWTO] [ROOT] No Tripping Flash Counter [SPR L710VPBLJ7] JB 4.1.1. It was super quick and easy.
Click to expand...
Click to collapse
Yeah, that same method should work. I personally like the custom recoveries, but understand your desires to leave it at stock recovery (not triggering the flash counter).
Like I mentioned before, Samsung hasn't (and most likely won't) locked their bootloaders, so any rooting method that has worked in the past should work in the future. Just make sure to read the last 3-4 pages of the thread for whatever method you're trying to use to see if there are any issues. I know an earlier version of mskip's toolkit was having issues with JB for a little bit (it's updated now).

Well I'm gonna give it a shot. Ill let you know how it turns out.
Sent from my SPH-L710 using xda app-developers app

Just went with cf autoroot. Worked fine.
Sent from my SPH-L710 using xda app-developers app

I've got a problem I installed the OTA and now I cant boot into android. Its stuck on starting apps. I have the stock recovery. How can I fix this?. What do I do? I can get to ODIN download mode. *edit** can get into safemode too. And I now have a custom recovery installed.
I still dont know what to do from here. How do I flash the downloaded rom because the new file I downloaded seems to be a zip and can only be flashed with CWM not ODIN. I cant place it in the right directory of my phone to do that.

jkj said:
I've got a problem I installed the OTA and now I cant boot into android. Its stuck on starting apps. I have the stock recovery. How can I fix this?. What do I do? I can get to ODIN download mode. *edit** can get into safemode too. And I now have a custom recovery installed.
I still dont know what to do from here. How do I flash the downloaded rom because the new file I downloaded seems to be a zip and can only be flashed with CWM not ODIN. I cant place it in the right directory of my phone to do that.
Click to expand...
Click to collapse
I replied to your thread. I hope it works for what you need.

[Q] Stupid question, because I am bone head!

I recently re-flashed my phone because I was unable to get it back to stock un-rooted so I could get the latest 4.4 update. Someone suggested using Triangle Away to reset my flash counter in order to show my phone was 'not modified'. I purchased Triangle Away installed etc, but it had a stern warning that resetting my flash counter could "hard brick" my phone.
I attempted to use the temporary disable of SU for OTA within Triangle Away to unroot my phone and apply the update, unfortunately the update didn't work and now I can not undo put back SU as enabled. My phone is unrooted without the ability to undo that feature in Triangle Away.
Question, is there a way to fix this with Triangle Away? Am I missing something or do I have to reflash my phone again?
Why would an app like Triangle Away have a feature within it's app that could cause this to happen and not a way to back out of it.
I hope someone can help me with this.:crying:

bigmtnskier said:
I recently re-flashed my phone because I was unable to get it back to stock un-rooted so I could get the latest 4.4 update. Someone suggested using Triangle Away to reset my flash counter in order to show my phone was 'not modified'. I purchased Triangle Away installed etc, but it had a stern warning that resetting my flash counter could "hard brick" my phone.
I attempted to use the temporary disable of SU for OTA within Triangle Away to unroot my phone and apply the update, unfortunately the update didn't work and now I can not undo put back SU as enabled. My phone is unrooted without the ability to undo that feature in Triangle Away.
Question, is there a way to fix this with Triangle Away? Am I missing something or do I have to reflash my phone again?
Why would an app like Triangle Away have a feature within it's app that could cause this to happen and not a way to back out of it.
I hope someone can help me with this.:crying:
Click to expand...
Click to collapse
Maybe I should ask the question more simply:
How do I re-ROOT my phone without flashing? Is that possible?

bigmtnskier said:
Maybe I should ask the question more simply:
How do I re-ROOT my phone without flashing? Is that possible?
Click to expand...
Click to collapse
Do u still have a custom recovery? If so, maybe flash the team epic root from recovery zip?

DMF1977 said:
Do u still have a custom recovery? If so, maybe flash the team epic root from recovery zip?
Click to expand...
Click to collapse
I do have a custom recovery, TWRP. I think I have it running again and rooted, what I did was re-install Busybox and rebooted into recovery, then rebooted back into the System and then it seemed to work fine. Not sure if I will brave Triangle Away again, but thank you for responding and offering a good suggestion.:good:

bigmtnskier said:
I purchased Triangle Away installed etc, but it had a stern warning that resetting my flash counter could "hard brick" my phone.
Click to expand...
Click to collapse
Did you reset your flash counter? As far as I know this was put in place by the developer to warn people...Of knowing what they are doing before hand. This warning is mainly in place to try and make people read to see if their phone model is supported.
To the best of my knowledge, no one has hard bricked their phone on any of the I747(m) models using this app. This feature does work as I have used it multiple times.
And what update our ROM are you installing? You said 4.4... I used ODIN to restore back to complete stock 4.1.1 (not rooted, stock recovery included) and the OTA update to stock 4.1.2 went without a hitch. I used CF Auto Root (via ODIN) to root and then installed a custom recovery.
Sent from my SAMSUNG-SGH-I747

aybarrap1 said:
Did you reset your flash counter? As far as I know this was put in place by the developer to warn people...Of knowing what they are doing before hand. This warning is mainly in place to try and make people read to see if their phone model is supported.
To the best of my knowledge, no one has hard bricked their phone on any of the I747(m) models using this app. This feature does work as I have used it multiple times.
And what update our ROM are you installing? You said 4.4... I used ODIN to restore back to complete stock 4.1.1 (not rooted, stock recovery included) and the OTA update to stock 4.1.2 went without a hitch. I used CF Auto Root (via ODIN) to root and then installed a custom recovery.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
I was attempting to do the OTA to go from 4.0.4 ICS to 4.1.x Jellybean. BTW, I was able to re-set my count to 0! Thank you for the reassurance!

bigmtnskier said:
I was attempting to do the OTA to go from 4.0.4 ICS to 4.1.x Jellybean. BTW, I was able to re-set my count to 0! Thank you for the reassurance!
Click to expand...
Click to collapse
I would highly recommend flashing the pure stock 4.1.1 rom (including stock recovery) and then do the OTA. The 4.1.2 stock rom might be available through KIES or through other sites by now, but I can't say for certain. Since you are already using ODIN, then CF auto root will be a breeze for you to root 4.1.2.
No worries. I was a little nervous too about Triangle Away at first but searching did not net anything saying that reseting the flash counter had hard bricked someone's phone. That is what pushed me to use it.

aybarrap1 said:
I would highly recommend flashing the pure stock 4.1.1 rom (including stock recovery) and then do the OTA. The 4.1.2 stock rom might be available through KIES or through other sites by now, but I can't say for certain. Since you are already using ODIN, then CF auto root will be a breeze for you to root 4.1.2.
No worries. I was a little nervous too about Triangle Away at first but searching did not net anything saying that reseting the flash counter had hard bricked someone's phone. That is what pushed me to use it.
Click to expand...
Click to collapse
I blew out Kies on my main machine because it doesn't work well, I had to re-set all my USB ports and re-install the Samsung USB drivers so no Kies for me. But where do I find a stock 4.1.1 rom from? My stock version is 4.0.4 (the original ROM when the S3 was released), I wonder if I can just use a custom 4.1.1 ROM instead or do you think it would work if I unroot/stock to 4.0.4 then OTA to 4.1.2?

bigmtnskier said:
I blew out Kies on my main machine because it doesn't work well, I had to re-set all my USB ports and re-install the Samsung USB drivers so no Kies for me. But where do I find a stock 4.1.1 rom from? My stock version is 4.0.4 (the original ROM when the S3 was released), I wonder if I can just use a custom 4.1.1 ROM instead or do you think it would work if I unroot/stock to 4.0.4 then OTA to 4.1.2?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1968625
Flash in Odin..

bigmtnskier said:
I blew out Kies on my main machine because it doesn't work well, I had to re-set all my USB ports and re-install the Samsung USB drivers so no Kies for me. But where do I find a stock 4.1.1 rom from? My stock version is 4.0.4 (the original ROM when the S3 was released), I wonder if I can just use a custom 4.1.1 ROM instead or do you think it would work if I unroot/stock to 4.0.4 then OTA to 4.1.2?
Click to expand...
Click to collapse
To ensure best results use ODIN to flash the stock ROM to 4.1.1. You should return the phone stock as if you just purchased from the store new. Then do the OTA. You can use ODIN after that to root with CF Auto root.
Sent from my SAMSUNG-SGH-I747

SuperSU Giving 1 Flash Counter. Trying to go back to stock rom with OTA.

Hello,
I’m looking for some guidance on getting my phone back to completely stock.
Steps I’ve done:
I have re-flashed back to the stock image using Odin. After doing so I wipe/reset. I then had a flash count of 8.
I then used Chainfires method and flashed with Odin to root device, which only installs super SU. I ran triangle away and still had a flash count as one. So I ran triangle away again and clicked the box that disables superSU for an amount of time. The rom went back to official with no flash counts.
Here is where I ran into problems. I ran super SU after seeing I had no flash counts to unroot the device. As soon as I opened superSU I got a flash count back to 1 again and could not update device from original firmware. I tried several different times including full wipe reset after I unrooted with superSU.
So what I did was re-rooted device using odin and install triangle away. I ran the exact same things as before by disabling SuperSU in triangle away and I was back to the official rom and no flash count. I then disabled superSU in manage applications and removed any notifications (force stop).
My phone was able to download the update as it recognized the stock rom, but then when I attempted to install it my phone it did its normal reboot for install and said install failed custom binary etc. Checked and again I had a 1 flash counter.
Possibly where I messed up?
Things I can gather or maybe I’m wrong. I downloaded stock image from Samsung. It was a TAR file. It is a 4.1 file. In addition I know it was for the T889 for T-mobile. Is there a possibility that this is the wrong file? Is there something else I should be flashing to phone with the PDA in any of other slots? Recovery file? Why when I attempt to run superSU unroot does it add a flash counter?
I do not have my original stock image. Phone T889 T-Mobile.
I’m usually pretty good at this stuff, but have run into a rut. I want to return my phone to completely stock and get OTA updates.
Any help would be greatly appreciated! Thank you in advance!!

RSVRMAN1 said:
...I’m usually pretty good at this stuff, but have run into a rut. I want to return my phone to completely stock and get OTA updates.
Any help would be greatly appreciated! Thank you in advance!!
Click to expand...
Click to collapse
If the main goal is to go back to stock to get official OTAs, I'm pretty sure the binary count bit doesn't need to be a worry. What has worked for me is to
- factory reset/wipe data (can do this using custom recovery or just the official stock recovery actually)
- ODIN factory image (I tend to DL them from sammobile)
At that point I had no issue grabbing OTAs - not sure if this helps but I hope it does

dwitherell said:
If the main goal is to go back to stock to get official OTAs, I'm pretty sure the binary count bit doesn't need to be a worry. What has worked for me is to
- factory reset/wipe data (can do this using custom recovery or just the official stock recovery actually)
- ODIN factory image (I tend to DL them from sammobile)
At that point I had no issue grabbing OTAs - not sure if this helps but I hope it does
Click to expand...
Click to collapse
Any response will help thank you!
I downloaded from sammobile as well. Do you download the factory image and install on phone or do you flash the factory image from ODIN.
I should probably clarify I'm trying to update phone by clicking software update. When I click that currently it states. Your device has been modified. Software updates are not available.
This is why I've been going the triangle away superSU route trying to just install the original stock firmware, click update and receive the latest version.
Here some additional info on my kernal and build. I'm not sure if this is possibly wrong?
Currently phone says android 4.1.1 baseband T889UVALL4 Kernel version 3.031-598701 [email protected]#1 SMP PREEMPT Sat Jan 5 19:34:13 KST 2013
Build number JR003C.T889UVALL4
Thanks again!

RSVRMAN1 said:
Any response will help thank you!
I downloaded from sammobile as well. Do you download the factory image and install on phone or do you flash the factory image from ODIN.
I should probably clarify I'm trying to update phone by clicking software update. When I click that currently it states. Your device has been modified. Software updates are not available.
This is why I've been going the triangle away superSU route trying to just install the original stock firmware, click update and receive the latest version.
Here some additional info on my kernal and build. I'm not sure if this is possibly wrong?
Currently phone says android 4.1.1 baseband T889UVALL4 Kernel version 3.031-598701 [email protected]#1 SMP PREEMPT Sat Jan 5 19:34:13 KST 2013
Build number JR003C.T889UVALL4
Thanks again!
Click to expand...
Click to collapse
I used ODIN - and the info looks fine. I had no issue getting the OTA from UVALK8 to UVALL4 using this approach, though is there a particular reason you want to go the click-update path? I ask because sammobile has a factory image of the most current version (UVBMD1) as well... might be a plan B at least.

dwitherell said:
I used ODIN - and the info looks fine. I had no issue getting the OTA from UVALK8 to UVALL4 using this approach, though is there a particular reason you want to go the click-update path? I ask because sammobile has a factory image of the most current version (UVBMD1) as well... might be a plan B at least.
Click to expand...
Click to collapse
I plan on giving the phone to my better half and buy new note 3 eventually. I feel that if I can click and have the phone update I know everything works and wont have to touch it again, while if I install the latest then on the next update I'm unsure if it will update having to flash the new stock rom again.
I love custom roms, but it requires lots of work keeping them up to date and can have various issues that I dont want her to deal with.
I'm wondering if I should try to flash a different stock recovery rom?
Here are 3 separate roms I could install do you have one you would suggest?
cant post the link but its from stockroms dot net
Do I need to install stock recovery on my phone? I guess I thought I just needed to install the factory image. Can you flash stock recovery on Odin or where do you put this into equation?
install stock image/install recovery/root/wipe/triangle away/superSU-unroot/wipe/update
Thanks again for the quick response.

RSVRMAN1 said:
I plan on giving the phone to my better half and buy new note 3 eventually. I feel that if I can click and have the phone update I know everything works and wont have to touch it again, while if I install the latest then on the next update I'm unsure if it will update having to flash the new stock rom again.
I love custom roms, but it requires lots of work keeping them up to date and can have various issues that I dont want her to deal with.
I'm wondering if I should try to flash a different stock recovery rom?
Here are 3 separate roms I could install do you have one you would suggest?
cant post the link but its from stockroms dot net
Do I need to install stock recovery on my phone? I guess I thought I just needed to install the factory image. Can you flash stock recovery on Odin or where do you put this into equation?
install stock image/install recovery/root/wipe/triangle away/superSU-unroot/wipe/update
Thanks again for the quick response.
Click to expand...
Click to collapse
I should clarify the factory images are from note2root DOT com

Going to keep trying to reflash: Just did it again and still keep getting a binary account right after I complete the Full unroot.
Why does it go from official to custom after this last step?
Following Chainfire
If you want to unroot for some reason :
From stock rom and root by Chainfire method all you need to do : Triangle Away app ,SuperSU / setting/ full unroot. Reboot into Recovery / Factory reset.
From custom rom : reflash stock image via Odin .reroot by CF auto root,reset counter with Triangle Away App,SuperSU/Setting/Full unroot . Recovery / Factory reset.
Can find stock firmware from here
Stock T889UVALJ1 & T889UVALK8 (Post 51) http://forum.xda-developers.com/show....php?t=1969551 ( Thank , TeshXX)
Stock + root http://forum.xda-developers.com/show....php?t=1975560 ( Thank , Mr.Robinson )

Tried a different stock firmware 4.1.2 T889 and now wont recognize T-mobile. Anyone have a link to the exact T889 stock firmware that I can just odin-install
Then triangle away/supersu reset and get OTA?
Really would like to get this working. Any help is greatly appreciated.

Try Mr Robinson,
http://forum.xda-developers.com/showthread.php?t=1975560
Sent from my SGH-T889 using xda app-developers app

UCUFNE4 to UCUFNJ1 update 16 gig AT&T I747

The development for the AT&T I747 has been discontinued by the developer. Thank you for your support.
WARNING: YOU COULD BRICK YOUR PHONE
UCUFNJ1 4.4.2 incremental update contains firmware.... bootloaders and modem baseband.
MUST BE ON UCUFNE4 FIRMWARE TO CONTINUE!!! Guide can be found here. http://forum.xda-developers.com/gal...are-update-t2808654/post53984772#post53984772
This is the perfect time to use this update to return your S3 to stock for resale or whatever. Download and save these files for when you are ready to return your phone to stock.
*This is a rooted NE4 system.img, stock recovery.img and boot.img. The install script will format system and factory data reset. /media is safe.*
1. Flash restore zip in a custom recovery. CWM, TWRP, Philz. https://www.androidfilehost.com/?fid=95784891001611561
2. Boot your phone and go through setup.
3. Use triangle away and clear your counter. http://forum.xda-developers.com/galaxy-s2/orig-development/2014-01-15-triangleaway-v3-26-t1494114
4. *Optional* If you want a clean un-rooted phone for the update do this now! , Go into SuperSu >settings>full unroot.
5. Reboot your phone.
6. Search for the OTA in the about settings, download and let the phone update.
Or download this and place in the root of your phones internal storage. Reboot into recovery and select the update from update.zip https://www.androidfilehost.com/?fid=95784891001611091
Advanced users.
The original OTA cfg file. https://www.androidfilehost.com/?fid=95784891001611092
.cfg file goes in root/cache/fota
Rename the .cfg extension to .zip and you can rename it update.zip yourself or you can actually flash it in a custom recovery once renamed. if you choose not to use the stock recovery to update.
*You will loose root during the update* But the bootloader is not locked so you can still Odin your favorite recovery and flash SuperSU.
TWRP 2.8.1.0 Odin tar. http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.8.1.0-d2att.tar
SuperSU http://download.chainfire.eu/589/SuperSU/UPDATE-SuperSU-v2.16.zip?retrieve_file=1
Once you flash your favorite recovery via Odin, you need to be ready to hold the Volume Up, Power and Home button combo when Odin reboots your phone. If you don't catch it, once the OS boots it will replace recovery with the stock version. Once SuperSU is installed your recovery will stick.​
Flashable Rooted NJ1 system.img and boot.img
MD5: 6df80e42df56ddf90512f4162e645cb3
Download: https://www.androidfilehost.com/?fid=95784891001613266
Flashable NJ1 Bootloaders and modem. *Must be on NE4 bootloaders prior to flashing.*
Download: https://www.androidfilehost.com/?fid=95832962473396872

Thanks enewman for writing this up.

Doing Vice Versa Method?
Just to be clear, what if my galaxy s3 is on UCUFNJ1 and I want to go back to UCUFNE4, I can still ODIN the custom recovery and flash SuperSU?
Galaxy S3 I747
Baseband: I747UCUFNJ1

For the advanced users, should we be able to install the update without any issues? I saw in another thread that someone had installed but now their phone will not boot past the Samsung logo to anything other than a black screen.
Also, do we know what this update contains yet? Other than new bootloaders, removal of root, etc.

mattsternc said:
For the advanced users, should we be able to install the update without any issues? I saw in another thread that someone had installed but now their phone will not boot past the Samsung logo to anything other than a black screen.
Also, do we know what this update contains yet? Other than new bootloaders, removal of root, etc.
Click to expand...
Click to collapse
You know if your not wanting to return your phone to stock I really wouldn't mess with this update. Far as the user who couldn't boot... Idk I wasn't there to watch them update. This whole mess with the S3 is exhausting. We haven't got a real Odin release so I'm woking with what I can extract from my phone after updating. The system.img in ne4 zip is 100% stock except for root. So I know the update worked because I did it. Also not sure what was updated either... The kernel yes... Firmware yes, all the system apps get patched so without decompiling ne4 and nj1 apps and comparing them afraid I have no idea what the update fixes or improves.

Thanks for all you do for us S3 owners, enewman17.
If we upgrade to the new NJ1 firmware, and then flash your latest SRX Rom, I assume we cannot then use your "restore.zip" to once again go back to NE4 stock since we would be on NJ1 bootloader? If so, is there a way to go back to NJ1 stock if we later want to sell our phone?

OKAstro said:
Thanks for all you do for us S3 owners, enewman17.
If we upgrade to the new NJ1 firmware, and then flash your latest SRX Rom, I assume we cannot then use your "restore.zip" to once again go back to NE4 stock since we would be on NJ1 bootloader? If so, is there a way to go back to NJ1 stock if we later want to sell our phone?
Click to expand...
Click to collapse
I have the nj1 system dump, I'll get it uploaded so anyone who updates can restore back to stock.

enewman17 said:
I have the nj1 system dump, I'll get it uploaded so anyone who updates can restore back to stock.
Click to expand...
Click to collapse
Thanks again my man.

Towelroot no longer works after the NJ1 update. Can the CF-AutoRoot still be used? The only version at http://autoroot.chainfire.eu/ says it's for 4.0.4.

Ark42 said:
Towelroot no longer works after the NJ1 update. Can the CF-AutoRoot still be used? The only version at http://autoroot.chainfire.eu/ says it's for 4.0.4.
Click to expand...
Click to collapse
Not sure if it still works but read the op you can Odin a custom recovery then flash super su.

enewman17 said:
Not sure if it still works but read the op you can Odin a custom recovery then flash super su.
Click to expand...
Click to collapse
Yeah, I saw that, but I never had a custom recovery before, that I know of at least, and I suspect a lot of other people finding this thread in the coming days are going to be in the same boat as me. They just want SuperSU so their favorite 1 or 2 apps that require SU can continue to work.
Has anybody tried CF-AutoRoot yet on the NJ1 4.4.2?

Ark42 said:
Yeah, I saw that, but I never had a custom recovery before, that I know of at least, and I suspect a lot of other people finding this thread in the coming days are going to be in the same boat as me. They just want SuperSU so their favorite 1 or 2 apps that require SU can continue to work.
Has anybody tried CF-AutoRoot yet on the NJ1 4.4.2?
Click to expand...
Click to collapse
Agreed! I'm the same boat as you.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Ark42 said:
Yeah, I saw that, but I never had a custom recovery before, that I know of at least, and I suspect a lot of other people finding this thread in the coming days are going to be in the same boat as me. They just want SuperSU so their favorite 1 or 2 apps that require SU can continue to work.
Has anybody tried CF-AutoRoot yet on the NJ1 4.4.2?
Click to expand...
Click to collapse
Tell you what, when I get home from work I will try cfauto root and see if it works.

enewman17 said:
Not sure if it still works but read the op you can Odin a custom recovery then flash super su.
Click to expand...
Click to collapse
I can confirm this as a root method for NJ1. You were exactly right regarding immediately booting into recovery after installing TWRP thru Odin. The files provided in your links (TWRP 2.8.1.0 Odin tar. http://techerrata.com/file/twrp2/d2a....1.0-d2att.tar and
SuperSU http://download.chainfire.eu/589/Sup...etrieve_file=1)
worked exactly as stated.
A BIG thanks to you. I can't live without AdAway, TiBackup and Xposed anymore! The few days without root left me a little grumpy.
And regarding the NJ1 update as a whole...I THINK the baseband upgrade IS an actual upgrade. Since NE4, I always thought Wifi operated was somewhat choppy/throttled. THIS looks to have been improved back to ICS "standards". Re: voice, I've had a handful of dropped calls, broken up calls, and choppy data in low signal areas over the past few months on with NE4. Initial observations (albeit a tad premature) lead me to believe that this has improved as well based on a weeks worth of data use and a few calls in a "controlled" environment (the area and physical structure of my work office complex is not cellular signal friendly to begin with) I have also noticed that boot-up time has improved a bit as well. Thanks again for your efforts with the ATT GS3!

I flashed CF-Auto ROOT via Odin without success, unable to gain root access. Followed your instructions via TWRP and flashed SuperSu 2.16, my SGS3-i747 is properly rooted and functioning perfectly on UCUFNJ1. As always, thank you very kindly for all your valuable time, effort, hard work and guidance. Be well, sir!

mwrobe1 said:
I can confirm this as a root method for NJ1. You were exactly right regarding immediately booting into recovery after installing TWRP thru Odin. The files provided in your links (TWRP 2.8.1.0 Odin tar. http://techerrata.com/file/twrp2/d2a....1.0-d2att.tar and
SuperSU http://download.chainfire.eu/589/Sup...etrieve_file=1)
worked exactly as stated.
Click to expand...
Click to collapse
What version of Odin do we need to flash that TWRP, or do you have a link handy?
I've seen quite a lot of different Odins out there and don't want to brick my phone by using the wrong one.
Any pitfalls to watch out for if using TWRP for the first time? I'm sure there is going to be a bunch of people having to do this now that both CF-AutoRoot and TowelRoot doesn't work anymore.
For me, personally, I just use root for AdFree and to edit the font fallback order to properly support Japanese instead of Chinese glyphs on shared Han-unified Unicode codepoints.

Ark42 said:
What version of Odin do we need to flash that TWRP, or do you have a link handy?
I've seen quite a lot of different Odins out there and don't want to brick my phone by using the wrong one.
Any pitfalls to watch out for if using TWRP for the first time? I'm sure there is going to be a bunch of people having to do this now that both CF-AutoRoot and TowelRoot doesn't work anymore.
For me, personally, I just use root for AdFree and to edit the font fallback order to properly support Japanese instead of Chinese glyphs on shared Han-unified Unicode codepoints.
Click to expand...
Click to collapse
Use Odin 3.0.7
Not really any pitfalls to TWRP. It has an easy clean user interface and it works.
Once you have flash Super Su, in my how to ne4 update there is a flashable stock recovery. You just flash it with TWRP and once you reboot, stock recovery will be back on you phone.

Hi enewman17,
Thanks for your posts and work. I'm hoping you can help me get the new NJ1 update installed and rooted.
Here's where I'm at: AT&T SGS3 on rooted stock NE4, installed using your guides from back in June this year.
The OTA NJ1 update downloaded but failed to install (as did the NE4 OTA back then, I assume because I was rooted).
My phone still has the TWRP recovery from the previous update, so I was hoping I could install using the original OTA cfg file download from the "advanced" section in your OP so as to avoid factory reset, etc.
I downloaded the file, renamed to update.zip, and copied to my SD card. However, when I boot into TWRP and try to install it, I get an error after the system check, something like "assert failed ro.secure==1". I guess I'm doing something wrong, maybe I'm mistaken about how the original OTA is supposed to work?
Again, I'm trying to end up with a stock, but rooted, NJ1 firmware but hopefully without having to reset/lose data and settings on the phone. I don't really care right now about resale or making it look like I haven't messed with it.
Thanks for any help you can provide! Let me know if I can provide any additional details.

I am actually looking to do the exact same thing. Currently rooted, with a lot of the AT&T apps frozen via Titanium Backup.
Hope there is some way to accomplish this without returning to stock!
Thanks in advance!
Bob2014 said:
Hi enewman17,
Thanks for your posts and work. I'm hoping you can help me get the new NJ1 update installed and rooted.
Here's where I'm at: AT&T SGS3 on rooted stock NE4, installed using your guides from back in June this year.
The OTA NJ1 update downloaded but failed to install (as did the NE4 OTA back then, I assume because I was rooted).
My phone still has the TWRP recovery from the previous update, so I was hoping I could install using the original OTA cfg file download from the "advanced" section in your OP so as to avoid factory reset, etc.
I downloaded the file, renamed to update.zip, and copied to my SD card. However, when I boot into TWRP and try to install it, I get an error after the system check, something like "assert failed ro.secure==1". I guess I'm doing something wrong, maybe I'm mistaken about how the original OTA is supposed to work?
Again, I'm trying to end up with a stock, but rooted, NJ1 firmware but hopefully without having to reset/lose data and settings on the phone. I don't really care right now about resale or making it look like I haven't messed with it.
Thanks for any help you can provide! Let me know if I can provide any additional details.
Click to expand...
Click to collapse

Bob2014 said:
Hi enewman17,
Thanks for your posts and work. I'm hoping you can help me get the new NJ1 update installed and rooted.
Here's where I'm at: AT&T SGS3 on rooted stock NE4, installed using your guides from back in June this year.
The OTA NJ1 update downloaded but failed to install (as did the NE4 OTA back then, I assume because I was rooted).
My phone still has the TWRP recovery from the previous update, so I was hoping I could install using the original OTA cfg file download from the "advanced" section in your OP so as to avoid factory reset, etc.
I downloaded the file, renamed to update.zip, and copied to my SD card. However, when I boot into TWRP and try to install it, I get an error after the system check, something like "assert failed ro.secure==1". I guess I'm doing something wrong, maybe I'm mistaken about how the original OTA is supposed to work?
Again, I'm trying to end up with a stock, but rooted, NJ1 firmware but hopefully without having to reset/lose data and settings on the phone. I don't really care right now about resale or making it look like I haven't messed with it.
Thanks for any help you can provide! Let me know if I can provide any additional details.
Click to expand...
Click to collapse
I'll get my stock rooted system dump up later so you can flash in TWRP or CWM.
Do you guys want it packaged with the stock recovery?
mattsternc said:
I am actually looking to do the exact same thing. Currently rooted, with a lot of the AT&T apps frozen via Titanium Backup.
Hope there is some way to accomplish this without returning to stock!
Thanks in advance!
Click to expand...
Click to collapse