I recently re-flashed my phone because I was unable to get it back to stock un-rooted so I could get the latest 4.4 update. Someone suggested using Triangle Away to reset my flash counter in order to show my phone was 'not modified'. I purchased Triangle Away installed etc, but it had a stern warning that resetting my flash counter could "hard brick" my phone.
I attempted to use the temporary disable of SU for OTA within Triangle Away to unroot my phone and apply the update, unfortunately the update didn't work and now I can not undo put back SU as enabled. My phone is unrooted without the ability to undo that feature in Triangle Away.
Question, is there a way to fix this with Triangle Away? Am I missing something or do I have to reflash my phone again?
Why would an app like Triangle Away have a feature within it's app that could cause this to happen and not a way to back out of it.
I hope someone can help me with this.:crying:
bigmtnskier said:
I recently re-flashed my phone because I was unable to get it back to stock un-rooted so I could get the latest 4.4 update. Someone suggested using Triangle Away to reset my flash counter in order to show my phone was 'not modified'. I purchased Triangle Away installed etc, but it had a stern warning that resetting my flash counter could "hard brick" my phone.
I attempted to use the temporary disable of SU for OTA within Triangle Away to unroot my phone and apply the update, unfortunately the update didn't work and now I can not undo put back SU as enabled. My phone is unrooted without the ability to undo that feature in Triangle Away.
Question, is there a way to fix this with Triangle Away? Am I missing something or do I have to reflash my phone again?
Why would an app like Triangle Away have a feature within it's app that could cause this to happen and not a way to back out of it.
I hope someone can help me with this.:crying:
Click to expand...
Click to collapse
Maybe I should ask the question more simply:
How do I re-ROOT my phone without flashing? Is that possible?
bigmtnskier said:
Maybe I should ask the question more simply:
How do I re-ROOT my phone without flashing? Is that possible?
Click to expand...
Click to collapse
Do u still have a custom recovery? If so, maybe flash the team epic root from recovery zip?
DMF1977 said:
Do u still have a custom recovery? If so, maybe flash the team epic root from recovery zip?
Click to expand...
Click to collapse
I do have a custom recovery, TWRP. I think I have it running again and rooted, what I did was re-install Busybox and rebooted into recovery, then rebooted back into the System and then it seemed to work fine. Not sure if I will brave Triangle Away again, but thank you for responding and offering a good suggestion.:good:
bigmtnskier said:
I purchased Triangle Away installed etc, but it had a stern warning that resetting my flash counter could "hard brick" my phone.
Click to expand...
Click to collapse
Did you reset your flash counter? As far as I know this was put in place by the developer to warn people...Of knowing what they are doing before hand. This warning is mainly in place to try and make people read to see if their phone model is supported.
To the best of my knowledge, no one has hard bricked their phone on any of the I747(m) models using this app. This feature does work as I have used it multiple times.
And what update our ROM are you installing? You said 4.4... I used ODIN to restore back to complete stock 4.1.1 (not rooted, stock recovery included) and the OTA update to stock 4.1.2 went without a hitch. I used CF Auto Root (via ODIN) to root and then installed a custom recovery.
Sent from my SAMSUNG-SGH-I747
aybarrap1 said:
Did you reset your flash counter? As far as I know this was put in place by the developer to warn people...Of knowing what they are doing before hand. This warning is mainly in place to try and make people read to see if their phone model is supported.
To the best of my knowledge, no one has hard bricked their phone on any of the I747(m) models using this app. This feature does work as I have used it multiple times.
And what update our ROM are you installing? You said 4.4... I used ODIN to restore back to complete stock 4.1.1 (not rooted, stock recovery included) and the OTA update to stock 4.1.2 went without a hitch. I used CF Auto Root (via ODIN) to root and then installed a custom recovery.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
I was attempting to do the OTA to go from 4.0.4 ICS to 4.1.x Jellybean. BTW, I was able to re-set my count to 0! Thank you for the reassurance!
bigmtnskier said:
I was attempting to do the OTA to go from 4.0.4 ICS to 4.1.x Jellybean. BTW, I was able to re-set my count to 0! Thank you for the reassurance!
Click to expand...
Click to collapse
I would highly recommend flashing the pure stock 4.1.1 rom (including stock recovery) and then do the OTA. The 4.1.2 stock rom might be available through KIES or through other sites by now, but I can't say for certain. Since you are already using ODIN, then CF auto root will be a breeze for you to root 4.1.2.
No worries. I was a little nervous too about Triangle Away at first but searching did not net anything saying that reseting the flash counter had hard bricked someone's phone. That is what pushed me to use it.
aybarrap1 said:
I would highly recommend flashing the pure stock 4.1.1 rom (including stock recovery) and then do the OTA. The 4.1.2 stock rom might be available through KIES or through other sites by now, but I can't say for certain. Since you are already using ODIN, then CF auto root will be a breeze for you to root 4.1.2.
No worries. I was a little nervous too about Triangle Away at first but searching did not net anything saying that reseting the flash counter had hard bricked someone's phone. That is what pushed me to use it.
Click to expand...
Click to collapse
I blew out Kies on my main machine because it doesn't work well, I had to re-set all my USB ports and re-install the Samsung USB drivers so no Kies for me. But where do I find a stock 4.1.1 rom from? My stock version is 4.0.4 (the original ROM when the S3 was released), I wonder if I can just use a custom 4.1.1 ROM instead or do you think it would work if I unroot/stock to 4.0.4 then OTA to 4.1.2?
bigmtnskier said:
I blew out Kies on my main machine because it doesn't work well, I had to re-set all my USB ports and re-install the Samsung USB drivers so no Kies for me. But where do I find a stock 4.1.1 rom from? My stock version is 4.0.4 (the original ROM when the S3 was released), I wonder if I can just use a custom 4.1.1 ROM instead or do you think it would work if I unroot/stock to 4.0.4 then OTA to 4.1.2?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1968625
Flash in Odin..
bigmtnskier said:
I blew out Kies on my main machine because it doesn't work well, I had to re-set all my USB ports and re-install the Samsung USB drivers so no Kies for me. But where do I find a stock 4.1.1 rom from? My stock version is 4.0.4 (the original ROM when the S3 was released), I wonder if I can just use a custom 4.1.1 ROM instead or do you think it would work if I unroot/stock to 4.0.4 then OTA to 4.1.2?
Click to expand...
Click to collapse
To ensure best results use ODIN to flash the stock ROM to 4.1.1. You should return the phone stock as if you just purchased from the store new. Then do the OTA. You can use ODIN after that to root with CF Auto root.
Sent from my SAMSUNG-SGH-I747
Related
Hi, I recently got a galaxy s3 (canadian version) 2 weeks ago from Mobilicity and just recently rooted following this method : http://forum.xda-developers.com/showthread.php?t=1771687. Before doing the rooting I was on the JB 4.1.1 update they released recently. Also used this method: http://forum.xda-developers.com/showpost.php?p=34661189&postcount=1 to unlock the phone
I would check daily but today I just noticed my device's status was Modified and I am unable to check for updates. I'm not sure what caused the modified status. I checked in download mode and my count is still 0/No. I also checked Triangle Away and it was the same. My device was normal when I first installed and used the root, I can only remember I just updated a few apps yesterday. I tried flashing with odin the rooted system image and it's the same.
I would like to be able to use the stock rom with root and updates, and set my device to normal status (I'd rather not update through Odin every time there is an update, and I am very satisfied with the stock rom). I've already backed up my data using Titaniumbackup, all my contact info and music (the stuff I only care about). Help appreciated.
EDIT: I also have installed Openrecovery script using goomanager, could that be the issue?
Use TriangleAway from the Play Store to get rid of the modified status
adslee said:
Use TriangleAway from the Play Store to get rid of the modified status
Click to expand...
Click to collapse
The counter is 0, should I still try to reset it?
Edit: just used TriangleAway, device status still modified, I can access the software update now though, but it gets stuck while checking
bump
You will not be able update via your carrier OAT if you rooted your device. The only thing you can do is to unroot the device, do the update, and re-root the device again. Visit www.galaxys3root.com on how to root and re-root.
Ganbara_Knight said:
You will not be able update via your carrier OAT if you rooted your device. The only thing you can do is to unroot the device, do the update, and re-root the device again.
Click to expand...
Click to collapse
yeah I was starting think that, I'll just get the updates using odin
deadmanrevolver said:
I would like to be able to use the stock rom with root and updates, and set my device to normal status (I'd rather not update through Odin every time there is an update, and I am very satisfied with the stock rom). I've already backed up my data using Titaniumbackup, all my contact info and music (the stuff I only care about). Help appreciated.
EDIT: I also have installed Openrecovery script using goomanager, could that be the issue?
Click to expand...
Click to collapse
If that is all you wanted just flashing the root66 rom from mrRobinson's threat in you original post could have accomplished it.
This would not trip the flash counter if it was still 0, what did it was installing a custom recovery like open recovery.
Follow this steps to get to a 4.1.1 "unmodified" or normal stock system with only root injected to it. You will be able to check and receive OTA updates, but if you ever update your rom OTA you will loose root.
1-download root66 jellybean rom for mobilicity from mrRobinson's thread, there are instructions there how to flash it with desktop Odin. (this will keep everything in your rom and will give you the stock recovery back, so the counter does not trip again)
2-download, install and run triangle away from chainfire's thread this will reset the counter to 0. Search for it.
Now your counter is 0 again, nothing is tripping it, room is rooted but it will still say "modified" and OTA updates may still not work, to fix it you need a clean start. Do a system factory reset, start over fresh and life will be beautiful.
Sent from my SGH-T999 using xda premium
I'm running a rooted stock I317M with nothing modified except for root. I used mrRobinson's thread h t t p :/ / forum.xda-developers.com/showthread.php?t=2004650 as a guide which worked perfectly to keep everything stock (and thus avoid tripping the flash counter) but gave me root. This morning the Canadian carriers began rolling out the 4.1.2 update OTA which failed a few times on my device so I used (GASP!) Kies to do the update. Not sure if it would have mattered OTA or Kies but I have now lost root. Has anyone managed to inject root into a stock image for the I317m yet? It looks like I could go with a custom AT&T I317 build or ADB in and manually install a custom recovery, root etc. but if possible I'm hoping to keep normal device status and not trip the flash counter.
Are you planning on turning your phone in for warranty anytime soon or do you just like the look of "Official" instead of "Modified" on your About Phone settings?
Exact same thing happened for mine, stock rooted Canadian OTA to 4.1.2 failed repeatedly, Had to use Kies as well and lost root. The main reason I wanted root was to switch off fast dormancy since my Canadian carrier doesn't support it and was killing battery. Good news is it stayed switched off.
[email protected] said:
Are you planning on turning your phone in for warranty anytime soon or do you just like the look of "Official" instead of "Modified" on your About Phone settings?
Click to expand...
Click to collapse
Not really. Originally it was just to make sure I'd get the update without issue when it was released. My understanding is that I can always reflash with the stock firmware I have from Sammobile and it will reset the flash counter + set the status back to normal if the need arose but also thought it easier to just unroot, reboot and uninstall SU if possible.
chris19000 said:
Not really. Originally it was just to make sure I'd get the update without issue when it was released. My understanding is that I can always reflash with the stock firmware I have from Sammobile and it will reset the flash counter + set the status back to normal if the need arose but also thought it easier to just unroot, reboot and uninstall SU if possible.
Click to expand...
Click to collapse
Cool.... Honestly, I never worry about tripping the counter unless I need to turn in for replacement/warranty repair. Apparently, this seems to work just fine: http://forum.xda-developers.com/showthread.php?t=2073141&highlight=lost+root
m4runner said:
Exact same thing happened for mine, stock rooted Canadian OTA to 4.1.2 failed repeatedly, Had to use Kies as well and lost root. The main reason I wanted root was to switch off fast dormancy since my Canadian carrier doesn't support it and was killing battery. Good news is it stayed switched off.
Click to expand...
Click to collapse
First time I've actually heard of fast dormancy. My battery life has actually been pretty good and that with fairly varied, heavy use. Have to look more into it. I rooted primarily for backing up (TB), remote file sharing and just plain messing around.
[email protected] said:
Cool.... Honestly, I never worry about tripping the counter unless I need to turn in for replacement/warranty repair. Apparently, this seems to work just fine: http://forum.xda-developers.com/showthread.php?t=2073141&highlight=lost+root
Click to expand...
Click to collapse
Thanks R1K, I looked at that earlier and still might try it after a little more in depth reading if nothing else presents itself. I use the camera fairly extensively and although it looks like the camera is only affected when patching the exploit I have to be a little cautious since I use it for work. Plus the easy unroot/stock return part :good:
m4runner said:
Exact same thing happened for mine, stock rooted Canadian OTA to 4.1.2 failed repeatedly, Had to use Kies as well and lost root. The main reason I wanted root was to switch off fast dormancy since my Canadian carrier doesn't support it and was killing battery. Good news is it stayed switched off.
Click to expand...
Click to collapse
One option which is what I did, was to download the 4.1.2 update from sammobile.
I then used mobile odin to flash it which has the ability to protect root.
So now I am stock rooted on latest firmware device status is normal
---------- Post added at 04:54 PM ---------- Previous post was at 04:42 PM ----------
[email protected] said:
Cool.... Honestly, I never worry about tripping the counter unless I need to turn in for replacement/warranty repair. Apparently, this seems to work just fine: http://forum.xda-developers.com/showthread.php?t=2073141&highlight=lost+root
Click to expand...
Click to collapse
Doubt this will work.
The whole way this gained root was via the exynos exploit.
This firmware I am pretty sure has patched it.
Exynos abuse says no but voodoo app says yes.
I can confirm the exploit is patched in this new firmware so I suspect this will close any holes used by exynos abuse app to root phone.
Canadoc said:
One option which is what I did, was to download the 4.1.2 update from sammobile.
I then used mobile odin to flash it which has the ability to protect root.
So now I am stock rooted on latest firmware device status is normal
---------- Post added at 04:54 PM ---------- Previous post was at 04:42 PM ----------
Doubt this will work.
The whole way this gained root was via the exynos exploit.
This firmware I am pretty sure has patched it.
Exynos abuse says no but voodoo app says yes.
I can confirm the exploit is patched in this new firmware so I suspect this will close any holes used by exynos abuse app to root phone.
Click to expand...
Click to collapse
Thank you Canadoc. Might be the best bet for me too. I did a TB backup just prior to the update so maybe I'll flash back to 4.1.1 with the root injected ROM in odin and then flash the 4.1.2 update from sammobile from mobile odin. Otherwise looks like it might be a custom i317 build for me. CWM sure sounds nice right now
For those trying to get multiveiw update and are rooted.... it is much much easier ti go get the firmware from sammobile.com then flash it with mobile odin with the ever root option.. all done :thumbup:
Sent from my SGH-I317 using xda premium
twanskys204 said:
For those trying to get multiveiw update and are rooted.... it is much much easier ti go get the firmware from sammobile.com then flash it with mobile odin with the ever root option.. all done :thumbup:
Sent from my SGH-I317 using xda premium
Click to expand...
Click to collapse
That's for sure. I'm going to go back to root injected stock 4.1.1 and start from scratch.
chris19000 said:
That's for sure. I'm going to go back to root injected stock 4.1.1 and start from scratch.
Click to expand...
Click to collapse
Worked as planned... more or less. Had to do a factory reset and flash twice to get 4.1.1 to boot but from there installed mobile odin, extracted and flashed from 4.1.2 (from sammobile and copied to external SD) and good to go. Now, if you want to go stock with root and for whatever reason don't want to/can't use mobile odin, head over to this thread http://forum.xda-developers.com/showthread.php?t=2004650&page=26 mrRobinson is working on injecting root into the stock builds.
Cheers.
Which is the better way ?
chris19000 said:
Worked as planned... more or less. Had to do a factory reset and flash twice to get 4.1.1 to boot but from there installed mobile odin, extracted and flashed from 4.1.2 (from sammobile and copied to external SD) and good to go. Now, if you want to go stock with root and for whatever reason don't want to/can't use mobile odin, head over to this thread http://forum.xda-developers.com/showthread.php?t=2004650&page=26 mrRobinson is working on injecting root into the stock builds.
Cheers.
Click to expand...
Click to collapse
I use the Mr. Robinsons thread to stock my device to 4.1.1 but when i did . it always stuck on the Samsung logo after rebooting.
so i have to put my phone in recovery mode and factory restore.
this wasy right now i have root on 4.1.1 .
but i wanna know the best way to update my phone to 4.1.2
becasue i know .. with OTA i will loose my root.
please help.
prashant19p said:
I use the Mr. Robinsons thread to stock my device to 4.1.1 but when i did . it always stuck on the Samsung logo after rebooting.
so i have to put my phone in recovery mode and factory restore.
this wasy right now i have root on 4.1.1 .
but i wanna know the best way to update my phone to 4.1.2
becasue i know .. with OTA i will loose my root.
please help.
Click to expand...
Click to collapse
Hi prashant there are a number of ways you can update OTA without losing root but of the easy ones I can only speak personally about one of them - Mobile Odin - which is what I used. It's a paid app but it gives you the option for EverRoot which maintains root across roms and automatically installs itself and SU in the new rom. Hate to ask, but are you sure you flashed the right rom? He has it listed as the new! Bell rom under January. If you flash that with his directions it should work - that being said though I did have to flash it twice myself to get it to work. One flash with odin, stuck on logo, back to regular recovery, wipe cache, download mode and reflash with odin, worked that time around. By that time I had mobile odin and flashed the regular update without root that way but mobile odin kept my root.
If you're looking to retain or regain root after ota, this is the easiest way imo. Just answered it in this thread.
http://forum.xda-developers.com/showthread.php?t=2156741
Froid said:
If you're looking to retain or regain root after ota, this is the easiest way imo. Just answered it in this thread.
http://forum.xda-developers.com/showthread.php?t=2156741
Click to expand...
Click to collapse
Thanks Froid. SuperSU seemed to work for some folks too if they dropped the dime for the PRO version. I did see some instances where neither worked too though, but not enough details to say why.
all you need to do is just reflash with odin rooted 4.1.1 stock rom then once that is done goto play store and get voodoo ota rootkeeper make backup then temp unroot then get the ota 4.1.2 update when finished goto to ota rootkeeper and restore root works just fine and u keep root.
I have Samsung SPH-L710 and I had it rooted with Mr.Robinson's method on 4.1.1. I had RoamControl installed and I had it on force roaming. Yesterday it was 4 AM, and I wasn't thinking. I accidentally accepted the OTA update to 4.1.2. So it installed successfully, but of course I lost root access. I was stuck roaming and it wouldn't change. I then used Kies to restore my phone. It flashed 4.1.1 onto it and it still will only roam. I have searched for this issue and cannot find anything that seems to work. Thanks ahead of time. I am worried that I will be stuck roaming for eternity.
Make sure you have RoamControl shut off. Then update PRL / Profile.
TEAM MiK
MikROMs Since 3/13/11
Figured it out, new problem
I dialed ##72786# and that fixed the roaming issue. But now I have another issue. I'm on 4.1.1 rooted with Mr.Robinson's method and I downloaded Voodoo OTA RootKeeper. I backed up the root and then accepted the 4.1.2 OTA update. But with the root protected it wouldn't reboot after I accept it. It just keeps saying "rebooting..." So I need to find a way to update to 4.1.2 and keep my root. I would really hate to flash to 4.1.2 and root it with Chainfire's method and then have to use triangle away.
galaxyman635 said:
I dialed ##72786# and that fixed the roaming issue. But now I have another issue. I'm on 4.1.1 rooted with Mr.Robinson's method and I downloaded Voodoo OTA RootKeeper. I backed up the root and then accepted the 4.1.2 OTA update. But with the root protected it wouldn't reboot after I accept it. It just keeps saying "rebooting..." So I need to find a way to update to 4.1.2 and keep my root. I would really hate to flash to 4.1.2 and root it with Chainfire's method and then have to use triangle away.
Click to expand...
Click to collapse
why would you hate to do that, it's all pretty straight forward... our you can just flash the stock rooted Rom that's in my Sig to update, but that will also trip the flash counter... it's really not that big a deal to trip that though, if something goes wrong there is a thread by billiard412 that has a stock Rom that you flash that we'll bring you back to 100% stock and will also reset the flash counter... no need to be afraid to trip the counter bud, it can easily be reset
SPRINT GS3 FAQ
flastnoles11 said:
why would you hate to do that, it's all pretty straight forward... our you can just flash the stock rooted Rom that's in my Sig to update, but that will also trip the flash counter... it's really not that big a deal to trip that though, if something goes wrong there is a thread by billiard412 that has a stock Rom that you flash that we'll bring you back to 100% stock and will also reset the flash counter... no need to be afraid to trip the counter bud, it can easily be reset
SPRINT GS3 FAQ
Click to expand...
Click to collapse
Thanks! So just unroot it with Chainfire's Superuser and than accept the OTA to 4.1.2, then use Chainfire's ODIN root? Best way?
Update: I just unrooted it through SU and tried to accept the OTA after I rebooted it and it still won't work. And sorry for being a noob, but I can't seem to find the stock rooted ROM for 4.1.2 to flash with Odin.
galaxyman635 said:
Thanks! So just unroot it with Chainfire's Superuser and than accept the OTA to 4.1.2, then use Chainfire's ODIN root? Best way?
Update: I just unrooted it through SU and tried to accept the OTA after I rebooted it and it still won't work. And sorry for being a noob, but I can't seem to find the stock rooted ROM for 4.1.2 to flash with Odin.
Click to expand...
Click to collapse
There isn't a rooted stock .tar for Odin, only.zips for recovery... Check my Sig and download the stock routed Rom, flash in recovery and then reset the flash counter with triangle away... although, my flash counter is at like 7, so there's no need to test the flash counter unless you're bringing it into Sprint for repair
SPRINT GS3 FAQ
Hello,
I have Galaxy S3 running 4.1.1, i have perviously
rooted it. After that i done a Factory Rest to the Device,
then tried to UpDate it to the latest Version!
But it always tells me that this device is modified!
What i want is to Completely REMOVE the Root,
then UPDATE it to the latest version? Please HELP!
DaYiM said:
Hello,
I have Galaxy S3 running 4.1.1, i have perviously
rooted it. After that i done a Factory Rest to the Device,
then tried to UpDate it to the latest Version!
But it always tells me that this device is modified!
What i want is to Completely REMOVE the Root,
then UPDATE it to the latest version? Please HELP!
Click to expand...
Click to collapse
As long as you have a custom recovery (either CWM or TWRP), you will not be able to update. You could go back to 100% stock unrooted and then update, but this is not necessary and you'll be doing a lot more steps. More steps means more chances to mess something up.
Good news is that you can just install the stock Rom. Freeza always updates his thread with the most recent Stock Rooted Rom. A lot of times he comes out with it even before I get the OTA from Sprint. All you have to do is flash it in TWRP or CWM. In case you're not familiar with the procedure for doing this, please see this linked post.
Finally, OTAs are fairly common, so check out CNexus' thread on OTAs.
DaYiM said:
Hello,
I have Galaxy S3 running 4.1.1, i have perviously
rooted it. After that i done a Factory Rest to the Device,
then tried to UpDate it to the latest Version!
But it always tells me that this device is modified!
What i want is to Completely REMOVE the Root,
then UPDATE it to the latest version? Please HELP!
Click to expand...
Click to collapse
If you want to go back to stock completely, you will need to odin the tar file and the latest triangle away. This will set your binary and get you back to normal and then odin the stock tar. This will put you back to completely stock with a stick recovery. You should be able to update from there. There are several links to the info you need.
Sent from my SPH-L710 using Tapatalk 2
4_Weasel said:
If you want to go back to stock completely, you will need to odin the tar file and the latest triangle away. This will set your binary and get you back to normal and then odin the stock tar. This will put you back to completely stock with a stick recovery. You should be able to update from there. There are several links to the info you need.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
They don't necessarily have to use Odin and Triangle Away. Here is a thread for a recovery-flashable zip which will reset their counter and restore them back to unrooted stock.
That being said, if the only reason they want to go back to stock is to take the update, it's entirely unnecessary. Like I said before, the more steps they have to take, the more chances they have to mess something up (especially when it comes to Odin and Download mode, in my opinion). If they want to return to stock unrooted for another reason, the easiest way is to use the flashable zip.
Thanks alot for all of your help
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.
eletendre84 said:
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.
Click to expand...
Click to collapse
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.
mentorkyrom said:
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.
Click to expand...
Click to collapse
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.
eletendre84 said:
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.
Click to expand...
Click to collapse
Tethering is available on CM11 just like it was on 10.2; would strongly recommend latest Philz Touch Recovery over either TWRP or CWM though. Although it is based on CWM, it has proven to be pretty much the superior recovery option for flashing any Android build number, plus it is highly customizable.
Philz Touch Recovery
this is how to downgrade
mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones
smuther22 said:
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones
Click to expand...
Click to collapse
Do you realize that this thread hasn't been used in a couple of months? I would assume the author has no more need of advice based on the inactivity. Also, once Knox is installed, it is on the phone to stay. PERIOD. NO DOWNGRADING POSSIBLE VIA ODIN. Custom ROMs of any build are fine via custom recovery, but any attempt to change the bootloader will trigger Knox and brick the phone. Dangerous info to be posting here, especially since someone else who doesn't know better might try this.