I am currently running Whom ROM, and I have a bit of confusion regarding modems.
I've seen it mentioned everywhere that you must flash a stock ROM, then flash the modem. However, after already doing a clean flash into this ROM, which runs MA7, I have no problems just using Mobile ODIN to flash LK8 Modem and the LK8 All-In-One. I am now running LK8 on this ROM with no issues.
Why would I even consider booting into a stock ROM before I flash a new Modem? I've done this same thing when I tried MA2 as well with no issues. About Phone even showed correct Modem, so it is all flashed through Mobile Odin correctly.
I have no errors whatsoevever. ROM runs smooth as butter.
I just don't see why I have to go to a stock ROM...perhaps someone can explain.
You dont need to go to stock rom to flash an updated modem just flash the all in one that are floating around and enjoy..... and as far as I know the moden doesn't really matter as jellybomb is bssed off lk8 and im on ma7..... running great and no issues!!!!!
Sent from my SPH-L900 using JellyBombed Tapatalk 2
Chaz187 said:
You dont need to go to stock rom to flash an updated modem just flash the all in one that are floating around and enjoy..... and as far as I know the moden doesn't really matter as jellybomb is bssed off lk8 and im on ma7..... running great and no issues!!!!!
Sent from my SPH-L900 using JellyBombed Tapatalk 2
Click to expand...
Click to collapse
Thanks, mate.
What's the difference between the All-In-One's and the Modem files? I always feel like I need to flash both.
Diabetic said:
Thanks, mate.
What's the difference between the All-In-One's and the Modem files? I always feel like I need to flash both.
Click to expand...
Click to collapse
Tha all in ones have the baseband and the modem together
Sent from my SPH-L900 using JellyBombed Tapatalk 2
Chaz187 said:
Tha all in ones have the baseband and the modem together
Sent from my SPH-L900 using JellyBombed Tapatalk 2
Click to expand...
Click to collapse
Appreciate it.
Related
..
Check out these threads:
rwilco12 Kernel Repository: http://forum.xda-developers.com/showthread.php?t=1662295
agat63: http://forum.xda-developers.com/showthread.php?t=1767421
Sent from my SPH-D710 using Tapatalk 2
Viper32 said:
I am running a fh23 rom rooted that I flashed from ODIN, can anyone tell me how to install clockwork with odin? Also where do I get the tar to do it?
Viper
Click to expand...
Click to collapse
You pretty much just download a kernel with cwm built in and flash the .tar file with Odin.
All kernels should be found in the link above
Sent from my SPH-D710 using Tapatalk 2
Okay I understand the deal with flashing the kernel/recovery but which one do I use. I am running a stock rooted odin I flashed of 4.0.4/ Baseband s710.10 S.FH23.
Thanks guys I am new to samsung stuff came from HTC....
Viper
Viper32 said:
Okay I understand the deal with flashing the kernel/recovery but which one do I use. I am running a stock rooted odin I flashed of 4.0.4/ Baseband s710.10 S.FH23.
Thanks guys I am new to samsung stuff came from HTC....
Viper
Click to expand...
Click to collapse
That depends on why you need cwm? Flash new roms? Flash mod zips?
Sent from my SPH-D710 using xda app-developers app
Viper32 said:
Okay I understand the deal with flashing the kernel/recovery but which one do I use. I am running a stock rooted odin I flashed of 4.0.4/ Baseband s710.10 S.FH23.
Thanks guys I am new to samsung stuff came from HTC....
Viper
Click to expand...
Click to collapse
I can't say im up to date on agats thread but i would use agats ff18 cwm from source. Its safe.
You can get this via sfhubs autoroot or via the kernel thread.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Viper32 said:
Okay I understand the deal with flashing the kernel/recovery but which one do I use. I am running a stock rooted odin I flashed of 4.0.4/ Baseband s710.10 S.FH23.
Thanks guys I am new to samsung stuff came from HTC....
Viper
Click to expand...
Click to collapse
Agats 5.4
bigtoysrock said:
Agats 5.4
Click to expand...
Click to collapse
This +1
Sent from my SPH-D710 using Tapatalk 2
Thanks guys I got it, I am really not liking the stock rooted Rom, how hard for me now to go to a custom Rom?
I know everyone likes different things but all I really want is a ICS streamlined Rom with all the bloat removed that everything works and is quick.
Any recommendations and instructions on how to get from where I am at now to the custom Rom?
Viper
Viper32 said:
Thanks guys I got it, I am really not liking the stock rooted Rom, how hard for me now to go to a custom Rom?
I know everyone likes different things but all I really want is a ICS streamlined Rom with all the bloat removed that everything works and is quick.
Any recommendations and instructions on how to get from where I am at now to the custom Rom?
Viper
Click to expand...
Click to collapse
If your stock ics kernel you can mobile Odin, Odin or flash a custom kernel, such as agats 5.4 kernel and then flash an ics rom. Or if your on a custom kernel, just flash the rom you want. All rom OPs have instructions. Obviously those who know me know what rom I will say, but we have tons of themes and mods for the "Goodness" rom. Pretty simple really. If you need help you can get me on gtalk, name is in my sig
Here is a list of modems, firmware and such for the L900
LJ1 Full Modem | Kernel
LJC Full Modem | Sboot and Tz | LJ1 to LJC All-In-One Firmware Update | Kernel
LK8 Full Modem | Sboot and Tz | LJC to LK8 All-In-One Firmware Update | Kernel
Rudyblah said:
For those of us too lazy to flash back to stock just for the newer modem i made this zip to only do the modem update of the ota.
Click to expand...
Click to collapse
Good Work! and 1st!
Thank you good sir!
Flash went through flawless.
Sent from my J-BoMbEd Note2 using XDA Premium App
3rd. Thanks!
Sent from my GNote II
Does this work on stock rooted odex? I don't have access to a computer could I just download this and flash through twpr?
Sent from my SPH-L900 using xda premium
Thnx
FABULOUS work dude.:laugh:
stylz3 said:
Does this work on stock rooted odex? I don't have access to a computer could I just download this and flash through twpr?
Click to expand...
Click to collapse
Yes, It should flash right through twpr
Sorry for the noob question. How do you find out what version of modem you have on the phone? What is the lastest version?
theoner1 said:
Sorry for the noob question. How do you find out what version of modem you have on the phone? What is the lastest version?
Click to expand...
Click to collapse
System Settings -> About device -> Read the "Baseband version" and it should say L900VPALJ1 because that is what the device shipped with
Now only if somebody can make an all in one that includes: firmware/baseband/modem that would be awesome!
steezc said:
Now only if somebody can make an all in one that includes: firmware/baseband/modem that would be awesome!
Click to expand...
Click to collapse
+1
Sent from my SPH-L900 using xda premium
Is there a way to go back to LJ 1? LJC isn't performing well on 4G. Its struggles to hold a signal while LJ 1 was holding a signal all day yesterday and this morning.
Sent from my SPH-L900 using xda premium
Man you rock awesome!!!!:good::good::good:
This is great! Nice job!
shook187 said:
Is there a way to go back to LJ 1? LJC isn't performing well on 4G. Its struggles to hold a signal while LJ 1 was holding a signal all day yesterday and this morning.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Blame sprintsung.
He didnt build it. He just made it flashable.
U can flash viperboys lj1 stock tar with odin. The flash rom of choice. Then u are back on lj1 firmware.
Sent from my SPH-L900 using Xparent ICS Tapatalk 2
steezc said:
Now only if somebody can make an all in one that includes: firmware/baseband/modem that would be awesome!
Click to expand...
Click to collapse
Like what i have under non-stock recovery section here: http://forum.xda-developers.com/showthread.php?t=1978470
or you looking for something else?
mrRobinson said:
Like what i have under non-stock recovery section here: http://forum.xda-developers.com/showthread.php?t=1978470
or you looking for something else?
Click to expand...
Click to collapse
Like what Freeza did for the S3....Full Firmware All-In-One (Baseband/modem&tz,rpm,sbl2,sbl3,aboot) Flashable with any recovery.
(http://forum.xda-developers.com/showthread.php?t=1743923)
It will automatically update everything without going back to stock etc. That way all we wait for is the updated rom with the new baseband/firmware based
joshbeach said:
Blame sprintsung.
He didnt build it. He just made it flashable.
U can flash viperboys lj1 stock tar with odin. The flash rom of choice. Then u are back on lj1 firmware.
Sent from my SPH-L900 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Do we have to use that stock tar? Theres nothing we can flash to revert back? Seem to be having not as good 3g signal.
Sent from my SPH-L900 using Tapatalk 2
Can you do the all in one update minus the checks
Sent from my SPH-L900 using Tapatalk 2
I'll see about pulling the full modem image for both and making flashables. As for removing the checks on the ota, that might cause issues. You would probably be better off flashing joshbeach's stock LJC rom and then doing the modem update
Sent from my SPH-L900 using xda app-developers app
If its been posted please mods close thos thread, but I was just om att forums looking for themes and seen they had working versions of miui and cm10, anyone know we might see some asop roms?
Sent from my SGH-T889 using Tapatalk 2
Im using jelly beer andvworks grate
pegapega02 said:
Im using jelly beer andvworks grate
Click to expand...
Click to collapse
On tmo note? Any reason y we dont have it in our forums
Sent from my SGH-T889 using Tapatalk 2
We can use the at&t the cm10 ROM.
G●Note~2 {Jedi X5}
Can we flash all of the AT&T ROMS on our T mobile Note2? If we flash AT&T Roms on our device do we need to do anything special, flash separate Kernel or modem? Will my build prop need to be changed back to t889 or anything like that? AT&T development has a lot more than we do. Would be awesome if we can use the ROMS from those forums it would be awesome.
Sent from my SGH-T889 using xda premium
You'd have to make sure that the ROM has no modem included (mostly an issue for Odin images) or separate it if so. (Extract system.img from tar, repack, ideally with Cygwin.)
Your build.prop, being on the /system partition would need some work to get it back to T889 values.
Darkshado said:
You'd have to make sure that the ROM has no modem included (mostly an issue for Odin images) or separate it if so. (Extract system.img from tar, repack, ideally with Cygwin.)
Your build.prop, being on the /system partition would need some work to get it back to T889 values.
Click to expand...
Click to collapse
all of that just went over my head
Then you might not want to flash AT&T ROMs. Understanding is very important when dabbling in flashing, especially off carrier builds.
Learn more, read up, then flash with confidence that what you are doing is safe.
Hastily spouted for your befuddlement
I'm using madmack's 12-13 build of CM10. It's working perfectly for me... everything works. It's very stable. His ROM is in the "original" development section of the AT&T Note 2 forums. Just flash it along with JB gapps. He has also started working on CM10.1, but not everything is working.
EDIT: I have not tried mounting to my PC yet.
Sent from my T889 using Tapatalk 2
roush97 said:
I'm using madmack's 12-13 build of CM10. It's working perfectly for me... everything works. It's very stable. His ROM is in the "original" development section of the AT&T Note 2 forums. Just flash it along with JB gapps. He has also started working on CM10.1, but not everything is working.
EDIT: I have not tried mounting to my PC yet.
Sent from my T889 using Tapatalk 2
Click to expand...
Click to collapse
Does the 64gig sd card read
Sent from my SGH-T889 using Tapatalk 2
For all you new people and the ones of you who can't read or are to lazy to search: This is the MC2 FIRMWARE ONLY !!! It does not update your MA7 rom to MC2. It ONLY UPDATES YOUR PHONES FIRMWARE. This IS NOT a software update.
Due to the all of the confusion the last time I will not be publicly posting the Odex / De-Odex ROMs for the MC2 update. Crawrj has released both the Oded/De-Odex versions here for download: http://forum.xda-developers.com/showthread.php?t=2241930
Below is the All-In-One FIRMWARE ONLY MA7 to MC2 zip
Remember! This is FIRMWARE ONLY, not a software update!
Stock L900VPAMC2 All-In-One Firmware: http://www.androidfilehost.com/?fid=22926241640219280
md5: d0b1534ad74b0884a975b27ba20d3d53
Stock L900VPAMC2 Modem: http://www.androidfilehost.com/?fid=22909751817930304
md5: fae85ddf7a9dcae17f9da9dd55f3ec3f
Below are the repacked Stock and Modified L900VPAMC2 Kernels
These are the correct 3.0.31-1090526 build!
Stock L900VPAMC2 Kernel: http://www.androidfilehost.com/?fid=22940013536739344
md5: 97dada3f41b9c148c387e25542d3b472
Modified L900VPAMC2 Kernel w/ init.d support: http://www.androidfilehost.com/?fid=22940013536739347
md5: 5c9c0d80b56dee00aec76eba7c6e94ff
These are flashable zips for TWRP/CWM.
Thanks for you work getting this out!!
Sent from my SPH-L900 using xda app-developers app
Thanks again you are the man
Rockin it from my Macknote2
Nice
Going to give the modem a run
-TeaM VeNuM Like A Boss :flipoff2:
-SoA: Son's of Android™
Yeteteeeee!
Hi I just flash it but it say failed but when I reboot my phone it did the update and phone information say mc2 so should I live it like that? Thank you again
El Abusador
Anyone flash these currently running an aosp ROM?
Curious if all went smoothly?
If no one has within the hour ill give it a go and report back.
T.i.a
Sent from my SPH-L900 using Tapatalk 2
mackentosh said:
Yeteteeeee!
Click to expand...
Click to collapse
Wayans Bros? :good:
Thanks for this, t3hproject!
I got failed messages but after reboot it shows baseband mc2.
I was on ma7 all-in-one firmware, stock odex rooted debloated ma7 rom, and twrp 2.5.0.0
These two pics show the errors. The text display area is scrollable so the two pics show the entire text output. It's only about 2 or 3 lines difference but the 1st one shows from the top and the 2nd one shows to the bottom.
Sent from my SPH-L900 using xda premium
That's exactly what happened to me but is working ok lol
El Abusador
Does flashing all in one firmware DOES NOT LOSE ROOT???? Because I have that annoying pop up android finalizing after asking the moderm
Sent from my SPH-L900 using xda premium
Fantastic! Thank you for sharing Flashed the modem on top of NoWizAOSPmodv1.4.7 with no problems or errors.
Sent from my SPH-L900
arvinb said:
Wayans Bros? :good:
Thanks for this, t3hproject!
Click to expand...
Click to collapse
Yep my grandmother loved that show
KEYofR said:
I got failed messages but after reboot it shows baseband mc2.
I was on ma7 all-in-one firmware, stock odex rooted debloated ma7 rom, and twrp 2.5.0.0
These two pics show the errors. The text display area is scrollable so the two pics show the entire text output. It's only about 2 or 3 lines difference but the 1st one shows from the top and the 2nd one shows to the bottom.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
carlosm83 said:
That's exactly what happened to me but is working ok lol
El Abusador
Click to expand...
Click to collapse
ill look at the script when I get home but it is the same one I used last time. it looks like the sboot.bin is erroring out from the pics but it shouldnt affect the operation if it isn't flashing
Sent from my SPH-L900 using xda premium
t3project said:
ill look at the script when I get home but it is the same one I used last time. it looks like the sboot.bin is erroring out from the pics but it shouldnt affect the operation if it isn't flashing
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
No operational problems observed so far. Only been a few hours though and only a couple calls.
Sent from my SPH-L900 using xda premium
t3project said:
Due to the all of the confusion the last time I will not be publicly posting the Odex / De-Odex ROMs for the MC2 update. They would not include the correct kernel anyway. This is because, once the update.zip is applied and you have stock unrooted MC2, in order to gain root you have to install the latest insecure boot.img which just happens to be MA7 and NOT MC2. Once I extract or find the full MC2 kernel I will release them publicly.
Click to expand...
Click to collapse
By using the latest insecure boot(MA7), what would we lose?
Thanks for everything!
So this is safe to flash, if rooted and on Stock MA7, and not loose root, or use Root Keeper prior then take, or flash OTA and re apply root keeper again ??
t3project said:
ill look at the script when I get home but it is the same one I used last time. it looks like the sboot.bin is erroring out from the pics but it shouldnt affect the operation if it isn't flashing
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Your sboot.bin is named Sboot.bin in the zip and the script is calling for sboot.bin. should be able to change the Sboot.bin to sboot.bin and get it working.
Sent from my SPH-L900 using xda premium
Mc2 modem flashed just fine on top of ma7 on AOSP.
Sent from my SPH-L900 using Tapatalk 2
Skripka said:
Mc2 modem flashed just fine on top of ma7 on AOSP.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Yep just flash no issues so far
SGNote2
Hi,
Is there any way I can flash the updated LTE modem for the Note 2 on my phone WITHOUT updating my entire firmware??
I have a very customized rom (which I backed up), and the update has fcked it up.
PLEASE HELP.
If there is a way to ONLY flash the modem, please give me step-by-step directions. I want to restore my previous firmware.
Thank you in advance
Will flashing the updated modem get me LTE without updating my firmware?????????????????????
pappaellio said:
Will flashing the updated modem get me LTE without updating my firmware?????????????????????
Click to expand...
Click to collapse
I did once flash a modem it was ok untill things started to run into problem so I just flash jedi rom that comes options flashing old to new modems.
Sent from my SGH-T889 using xda app-developers app
Flash it and find out. In the time you put all those? You could have already checked and if not flashed the older modem.
Sent from my SGH-T889 using xda app-developers app
This is great lols
Sent from my SGH-T889 using Tapatalk 2
I flash modems all time for experimental purposes. Yes u can flash a modem using a custom recovery personally I use TWRP. I dont wipe anything just flash reboot and it should be ok.
Sent from my SGH-T889 using xda app-developers app
does anyone has a link for tmobile LTE modem, i can use too
also, any idea how we can get tmobile wifi calling on custom rom if it was not in the rom? or is it something only a rom developer should have added while making the rom?
thanks
cherry316316 said:
does anyone has a link for tmobile LTE modem, i can use too
also, any idea how we can get tmobile wifi calling on custom rom if it was not in the rom? or is it something only a rom developer should have added while making the rom?
thanks
Click to expand...
Click to collapse
modem can be found here http://forum.xda-developers.com/showthread.php?t=2564430
wifi calling only works on tmobile produced roms
mattlowry said:
modem can be found here http://forum.xda-developers.com/showthread.php?t=2564430
wifi calling only works on tmobile produced roms
Click to expand...
Click to collapse
thanks :good: