If its been posted please mods close thos thread, but I was just om att forums looking for themes and seen they had working versions of miui and cm10, anyone know we might see some asop roms?
Sent from my SGH-T889 using Tapatalk 2
Im using jelly beer andvworks grate
pegapega02 said:
Im using jelly beer andvworks grate
Click to expand...
Click to collapse
On tmo note? Any reason y we dont have it in our forums
Sent from my SGH-T889 using Tapatalk 2
We can use the at&t the cm10 ROM.
G●Note~2 {Jedi X5}
Can we flash all of the AT&T ROMS on our T mobile Note2? If we flash AT&T Roms on our device do we need to do anything special, flash separate Kernel or modem? Will my build prop need to be changed back to t889 or anything like that? AT&T development has a lot more than we do. Would be awesome if we can use the ROMS from those forums it would be awesome.
Sent from my SGH-T889 using xda premium
You'd have to make sure that the ROM has no modem included (mostly an issue for Odin images) or separate it if so. (Extract system.img from tar, repack, ideally with Cygwin.)
Your build.prop, being on the /system partition would need some work to get it back to T889 values.
Darkshado said:
You'd have to make sure that the ROM has no modem included (mostly an issue for Odin images) or separate it if so. (Extract system.img from tar, repack, ideally with Cygwin.)
Your build.prop, being on the /system partition would need some work to get it back to T889 values.
Click to expand...
Click to collapse
all of that just went over my head
Then you might not want to flash AT&T ROMs. Understanding is very important when dabbling in flashing, especially off carrier builds.
Learn more, read up, then flash with confidence that what you are doing is safe.
Hastily spouted for your befuddlement
I'm using madmack's 12-13 build of CM10. It's working perfectly for me... everything works. It's very stable. His ROM is in the "original" development section of the AT&T Note 2 forums. Just flash it along with JB gapps. He has also started working on CM10.1, but not everything is working.
EDIT: I have not tried mounting to my PC yet.
Sent from my T889 using Tapatalk 2
roush97 said:
I'm using madmack's 12-13 build of CM10. It's working perfectly for me... everything works. It's very stable. His ROM is in the "original" development section of the AT&T Note 2 forums. Just flash it along with JB gapps. He has also started working on CM10.1, but not everything is working.
EDIT: I have not tried mounting to my PC yet.
Sent from my T889 using Tapatalk 2
Click to expand...
Click to collapse
Does the 64gig sd card read
Sent from my SGH-T889 using Tapatalk 2
Related
Can tmo note II user use Att note II roms?
Take the poll and Write which rom worked for you, and i will add to below
PLEASE FLASH AT YOUR OWN RISKS, PEOPLE WHO CONTRIBUTED IN THIS DISCUSSION DOES NOT HOLD RESPONSIBILITY TO WHAT YOU MIGHT DO TO YOUR DEVICE!!
I can add what roms work below.
Myself: TMO
- CleanRom by scrosler, here is the link
- Flashed Tmo Modem
- Flashed Tmo Persus Kernel
- Using TWRP Recovery
sanchitgrover:
- CleanRom
rail205: Telus
- CleanRom
Warrior1975:
- JellyBeer
- May or may not have bluetooth issue!
mojorisin7178:
- JellyBeer
D_one:
- JellyBeer
Sent from my SGH-T889 using xda premium
No, do not do this unless you want a very expensive paper weight
Sent from my GT-I9100
If I helped you, please hit the thanks button!
the miui rom from att note 2 works on the tmobile note 2 and so does cm10/ jellybeer
I posted on the CleanRom thread, and the op said radio is not included so maybe that will work too?.???
Sent from my SGH-T889 using xda premium
AngryDinosaur said:
I posted on the CleanRom thread, and the op said radio is not included so maybe that will work too?.???
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Same with jelly beer no modem ...really all will work. If your worried just flash the rom then flash the modem.. BTW if it didn't work it won't kill the phone just flash another rom or restore
Sent from my SGH-T889 using xda premium
Just flashed jelly beer before. Works perfectly.
Sent from my Nexus 7 using XDA Premium HD app
ramnex said:
No, do not do this unless you want a very expensive paper weight
Sent from my GT-I9100
If I helped you, please hit the thanks button!
Click to expand...
Click to collapse
Please don't reply to a question if you don't know the correct answer.
Sent from my SGH-T889 using xda premium
I apologise. It didn't occur to me that the chipsets were the same, unlike previous Samsung releases
Sent from my GT-I9100
If I helped you, please hit the thanks button!
The answer is yes... I ported the other way around... T889 Stock ROM to I317...
http://forum.xda-developers.com/showthread.php?t=2026569
Sent from my SGH-T889 using XDA Premium HD app
Someone said they have the AT&T Jellybeer rom running perfectly on our T889, I need to flash our modem though, correct? Does anyone have a zip link to one, I can't seem to find a recovery flashable one? I'm kind of excited now, since our forum seems so quiet.
TerrorCandii Inc.
TerrorCandii said:
Someone said they have the AT&T Jellybeer rom running perfectly on our T889, I need to flash our modem though, correct? Does anyone have a zip link to one, I can't seem to find a recovery flashable one? I'm kind of excited now, since our forum seems so quiet.
TerrorCandii Inc.
Click to expand...
Click to collapse
No need to flash a modem. Clean install first, then just flash the rom and flash gapps. I'm currently running Jelly Beer. :good:
I have Jelly Thunder running fine on mine, I just stayed in recovery and flashed Persius kernel for our device after flashing the ROM, everything working here.
Sent from my SAMSUNG-SGH-T889 using xda premium
Wait, the modem is the same? So not used to having a phone with the same specs, Lol. I do have to flash a different kernel though?
TerrorCandii Inc.
Modem is not the same, but I am assuming the roms that doesn't include a modem will not replace the one you have now
Sent from my SGH-T889 using xda premium
AngryDinosaur said:
Modem is not the same, but I am assuming the roms that doesn't include a modem will not replace the one you have now
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Yea, I just asked someone in the Jellybeer thread if I had to worry about that, or flash a modem, or kernel. To be on the safe side.... if so, Mmm..... back on AOSP, is going to feel so good. Lol
TerrorCandii Inc.
I too am running jellybeer and it is great it will do for now till whitehawkx and cmenard relese a nice shiny new AOKP rom for us (fingers crossed) it has some AOKP features in it. All I have to say is read read read and when you are done and think you got it read again. All the info is in the the first few posts of a rom thread. just make sure that there is no modem mostr devs do not include a modem but I have notices a few that are starting to put one in so just watch if they do they usually say so because like I said it is not standard pratice.
I do have a question I have not flashed any touchwiz att roms only the unofficial cm10 and jellybeer. So on the TW roms do you have to flash o tmo kernel? The reason I ask is because on the s2 the main difference was the rotation. It was always messed up so the way to fix it was to use a tmo kernel or vice versa . Until someone made a .zip that fixed that and the device name in the build.prop so is that the same situation here.. It doesnt sound like it.
And one m ore question while I am here I posted a question in the q&A thread if anyone knows the proper lcd density. I dont like the way jellybeer is it has small fonts on the phone but everything in the market is way too big and it is driving me nutts.
mojorisin7178 said:
I too am running jellybeer and it is great it will do for now till whitehawkx and cmenard relese a nice shiny new AOKP rom for us (fingers crossed) it has some AOKP features in it. All I have to say is read read read and when you are done and think you got it read again. All the info is in the the first few posts of a rom thread. just make sure that there is no modem mostr devs do not include a modem but I have notices a few that are starting to put one in so just watch if they do they usually say so because like I said it is not standard pratice.
I do have a question I have not flashed any touchwiz att roms only the unofficial cm10 and jellybeer. So on the TW roms do you have to flash o tmo kernel? The reason I ask is because on the s2 the main difference was the rotation. It was always messed up so the way to fix it was to use a tmo kernel or vice versa . Until someone made a .zip that fixed that and the device name in the build.prop so is that the same situation here.. It doesnt sound like it.
And one m ore question while I am here I posted a question in the q&A thread if anyone knows the proper lcd density. I dont like the way jellybeer is it has small fonts on the phone but everything in the market is way too big and it is driving me nutts.
Click to expand...
Click to collapse
That i dont know, all the note II has the same hardware, correct me if im wrong. so i dont know if flashing a tmo note II kernel with a Att TW rom will work. but CleanRom is using Persus, and i think Tmo N2 has Persus kernel, so maybe it will work
Here it is guys, i took the risks with my heart pounding every second when it was installing and booting
Using CleanRom by scrosler, here is the link
I flashed the rom, in aroma, i choosed ATT as the carrier and persus kernel, then the rest is pretty self explanatory
then i flashed Tmo modem and Tmo Persus Kernel
it booted and it is running, i powered it off and took out the battery to test if it will power back on again, and indeed it did
Clean rom works perfectly without a flaw.. no need to install any kernel,modem or anything .
Sent from my SAMSUNG-SGH-I347 using xda premium
+1
Worked flawlessly using telus as the install option.
Sent from my SAMSUNG-SGH-I317 using xda premium
Didn't see it mentioned but if you want a good cm10 rom check out the at&t forum. I'm running it and its great. I'm glad to have themes back
Sent from my SGH-I317 using xda premium
If you mean jellybeer its good but laggy and usb mount doesnt work. Will there ever be an tmobile specific aosp builds or do we rely on the at&t ones?
Don't know that but got tired of waiting. It wasnt laggy for me. I really only like it for the themes and just found out we could use att roms
From the Best: Note 2
tsf shell lagged when i used it with jellybeer and only got 4000 on quadrant
Running jelly beer now, very smooth for me. SPB Shell 3D for me, and no lag. Missing multi Window but otherwise very good.
Sent from my SGH-I317 using XDA Premium HD app
It was mostly animation lag. Also as i said i could not mount my sdcard or internal storage on my pc with it. Ill give a future build a try again.
I'm using madmack's 12-13 build of CM10. It's working perfectly for me... everything works. It's very stable. His ROM is in the "original" development section of the AT&T Note 2 forums. Just flash it along with JB gapps. He has also started working on CM10.1, but not everything is working.
EDIT: I have not tried mounting to my PC yet.
Sent from my T889 using Tapatalk 2
What do you have to do different from flashing a regular rom with the tmobile modem and everything? I downloaded jellybomb from at&t note 2 forum and the t889 uvalj1 modem, but when I try to flash the rom it fails, and the modem wont show up in twrp because it isnt .zip. Any help greatly appreciated.
Sent from my SGH-T889 using xda app-developers app
Download the file again. I tried Jellybeer, it works great. You don't need to flash the modem, it's not included in the ROM. Make sure you flash JB gapps. I wasn't getting a signal on first boot of Jelly beer. I can't remember if it was a reboot or cache/dalvik wipe that fixed it.
Sent from my T889 using Tapatalk 2
Thanks. I downloaded Jellybeer again for the At&t note2 and the gapps but it still failed when I tried to flash it.. i dont know know what the problem is
Sent from my SGH-T889 using xda app-developers app
troberts8 said:
Thanks. I downloaded Jellybeer again for the At&t note2 and the gapps but it still failed when I tried to flash it.. i dont know know what the problem is
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Every update seems to re-add the device checks in the update script. Sure it will get fixed soon.
Sent from my handheld Android 'PC', NOTE II
---------- Post added at 06:53 PM ---------- Previous post was at 06:51 PM ----------
fix-this! said:
If you mean Will there ever be an tmobile specific aosp builds or do we rely on the at&t ones?
Click to expand...
Click to collapse
The hardware is the same, except the radio. If you take any 7105 (7105, AT&T, Verizon, Sprint, T-mobile) rom and the T-Mobile radio uou have a T-mobile ROM.
Sent from my handheld Android 'PC', NOTE II
^right but a few things dont seem to work either. Its odd to rely on other carrier based roms. Just kinda shocked our development seems kinda slow. Not ungreatfull just confused.
So are you telling me i can also flash sprint & verizon based roms as long as i flash our radio?
So far so good....
Sent from my GT-N7105 using Tapatalk 2
I did get the CM10 rom in the At&t Note 2 Original development thread to flash and so far it is working flawlessly. All i did was flash the rom and the gapps. No radio or modem or anything. Does that mean the rom didnt include a specific radio or modem or does it just not matter?
Sent from my SGH-I317 using xda app-developers app
I just tried to flash a verizon rom and it wouldnt even boot so im doubting they are all universal. Also tried an international rom and it booted but i had no signal or data. Thankfully i nandroided back and im good. Maybe we should make a list of roms that can be used.
USB Mass Storage connection
fix-this! said:
It was mostly animation lag. Also as i said i could not mount my sdcard or internal storage on my pc with it. Ill give a future build a try again.
Click to expand...
Click to collapse
Try this.
http://forum.xda-developers.com/showthread.php?t=1800935
It worked for me. I am running JellyBeer and all is well.
FINALLY got Jellybeer working fine on my t889. No problems so far. Loving it! Man, how i missed AOSP roms!! Thanks for everyone's help!
Sent from my SGH-I317 using xda app-developers app
troberts8 said:
FINALLY got Jellybeer working fine on my t889. No problems so far. Loving it! Man, how i missed AOSP roms!! Thanks for everyone's help!
Sent from my SGH-T889using xda app-developers app
Click to expand...
Click to collapse
I had to download the mirror on my laptop instead of the original download link on my phone to get a file that would actually flash in TWRP.
Sent from my SGH-T889 using xda app-developers app
---------- Post added at 10:48 AM ---------- Previous post was at 10:19 AM ----------
Only prob with Jelly Beer is i cant get my email to sync and my only prob with the cm10 version is no mounting phone/card thru usb to computer. Everything else seema great.
Edit: nvm reflashed rom now email sync works
Sent from my SGH-T889 using xda app-developers app
Jellybeer looks sick.. coulnt really get over the keyboard.. the on screen buttons lift the space bar a little off the bottom.. but the killer to me was no bluetooth.. for me atleast.
Sent from my SGH-T889 using xda app-developers app
fix-this! said:
I just tried to flash a verizon rom and it wouldnt even boot so im doubting they are all universal. Also tried an international rom and it booted but i had no signal or data. Thankfully i nandroided back and im good. Maybe we should make a list of roms that can be used.
Click to expand...
Click to collapse
Need kernel & modem if coming from a CDMA ROM. International 7105 will work with modem. 7100 will not work, and could bork your imei so DO NOT FLASH 7100 ROMS
Sent from my SGH-T889 using Tapatalk 2
Normally I Would't Suggest Flashing another carrier ROM but For Some reason People have Figured it out on the Note 11 far the first time I'Ve Seen.So for my own curiosity and im sure others as well. Lets try to make a list of all the compatible non T-Mobile roms for the Note II.
AT&T - JELLYBEER
At&T - JELLYBAM
AT&T - CleanRom
N7105 - International LL1
AT&T - JellyThunder
If you are new to flashing, please dont be the first to try new Roms. And apparently no 7100 roms!!!
Ive read somewhere we can flash any US Variant Rom as long as no modem or radio is included. But I find that hard to believe. Please correct me if I'm wrong.
If I'm missing any Rom's, will happily add to list
I use the international LL1 for the N7105. Works like a dream.
Sent from my GT-P5113 using xda premium
Jellythunder from at&t works great also.
Sent from my SGH-T889 using xda premium
Thanks for input. Now have to ask why did you flash those specific ones? Does it say compatible in thread or just flashed and worked
trevor7428 said:
Normally I Would't Suggest Flashing another carrier ROM but For Some reason People have Figured it out on the Note 11 far the first time I'Ve Seen.So for my own curiosity and im sure others as well. Lets try to make a list of all the compatible non T-Mobile roms for the Note II.
AT&T - JELLYBEER
At&T - JELLYBAM
AT&T - CleanRom
N7105 - International LL1
AT&T - JellyThunder
If you are new to flashing, please dont be the first to try new Roms. And apparently no 7100 roms!!!
Ive read somewhere we can flash any US Variant Rom as long as no modem or radio is included. But I find that hard to believe. Please correct me if I'm wrong.
If I'm missing any Rom's, will happily add to list
Click to expand...
Click to collapse
I know for a fact (as I have tried myself) AT&T, T-Mobile (obviously), 7105, and Sprint. Sprint did require a kernel flash (boot.img). Otherwise a modem flash is required (unless the Rom does not flash the modem, then you need not flash a modem)
Basically here is how it works:
T-Mobile : ROM
AT&T: ROM, modem
7105: ROM, modem
Sprint: ROM, modem, kernel
I would guess, Verizon would work the same as Sprint.
Sent from my SGH-I317 using Tapatalk 2
EDIT: had to add AOSP kernels are not the same as stock Samsung kernels. Basically for AOSP kernel get the boot.img from your CM7/AOKP/PA whatever AOSP ROM for your phone (I took it from madmack's CM10 and applied it to the Sprint PA ROM)
trevor7428 said:
Thanks for input. Now have to ask why did you flash those specific ones? Does it say compatible in thread or just flashed and worked
Click to expand...
Click to collapse
There is a dev, Teshxx who is doing a fine job of porting international and roms from other carriers. He uses the rom for a base and adapts it to the T889. The N7105 roms are stock samsung, no carrier bloat.
Sent from my GT-N7105 using xda premium
Hi there guys. I too can confirm this. The all us carrier deal anyway. There are easy ways and there are better or right ways. The easy way only really requires a few lines swapped and or deleted on the rom you want and the rom your specific device requires. I've tested twice. Sprint and att via testing the two ports done by a few verizon users . However from what we've experienced ( mind you this us s3 and not note 2) you don't have to flash or worry as far as I've noticed any radios or rpm as those are written to the partitions via your ota or flashing seperately ..And we also flashed different kernel. This is just more testimony and not saying I know any facts or that I personally port or figured this out on my own. A couple of very nice devs in our verizon forum shared this info. And now many are succeeding. Thanks and hope I'm not jacking your note 2 thread. Lol
Sent from my SGH-i535 using xda premium
Great thread as I was wondering which ROMs I could flash safely and which I couldn't on my T-Mobile T889.
What kernel is everyone using on their Tmobile Note II, when its needed? Perseus?
Also can someone shoot me a link to the modem they flashed on their Tmo Note II?
Thanks
fandroid93 said:
Great thread as I was wondering which ROMs I could flash safely and which I couldn't on my T-Mobile T889.
What kernel is everyone using on their Tmobile Note II, when its needed? Perseus?
Also can someone shoot me a link to the modem they flashed on their Tmo Note II?
Thanks
Click to expand...
Click to collapse
I am running jellybam from AT&T with its kernel. I was using the newest radio from the dev section but lost Bluetooth on my phone. Reverted to http://forum.xda-developers.com/showthread.php?p=33308483 and all is working now.
Sent from my SGH-I317 using Tapatalk 2
_Dennis_ said:
I am running jellybam from AT&T with its kernel. I was using the newest radio from the dev section but lost Bluetooth on my phone. Reverted to http://forum.xda-developers.com/showthread.php?p=33308483 and all is working now.
Sent from my SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Okay, so when you go to flash a T-Mobile rom you should probably update to the latest radio right? Also how do you flash radios?
Thanks
What sprint roms work?
Sent from my SGH-T889 using xda app-developers app
fandroid93 said:
Okay, so when you go to flash a T-Mobile rom you should probably update to the latest radio right? Also how do you flash radios?
Thanks
Click to expand...
Click to collapse
I would probably try but I reverted to stock trying to fix my GPS issue but it still would not work. It may just be me with the issues. As for how to flash a radio. There are update.zip files that you can use in the dev section.
Sent from my SGH-I317 using Tapatalk 2
---------- Post added at 08:48 PM ---------- Previous post was at 08:46 PM ----------
mastermindx85 said:
What sprint roms work?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I used the PA ROM from Sprint section. I needed my radio, my kernel (or /data won't save) and an APN manager on the /system partition (I used HiAPN)
Sent from my SGH-I317 using Tapatalk 2
[PATCH] *** N7105 AT&T and VZN ROMs on your SPH-L900 *** [N7100 works for ADV Users]
DISCLAIMER: I am not responsible for anything that happens to your phone. You brick it, you fix it!
This is a combination of work from scrosler and myself. I saw where Scott did this for the VZN GN2 and I modified it to work with the Sprint (SPH-L900) GN2 phones. With this modification your are able to flash N7105 ,AT&T (SGH-I317) and Verizon (SCH-I605) Roms to your phone. Both of those rom bases are confirmed working. Please make sure you do not flash modems/radios for the above listed devices. N7100 INT roms can be flashed using this method ONLY AFTER they have been ported to the N7105/i317 following madmack's guide in this thread. I can confirm that a port I just did of a N7100 rom works as well.
First download the SPH-L900 patch from HEREhttp://www.androidfilehost.com/?fid=9390248398092764671
Download a stock SPH-L900 kernel from the bottom of this thread -- Perseus kernels work as well, found HERE
Choose a N7105, SGH-i317 or SCH-I605 rom that does not install modems/radios - The Swedish N7105XXDLL1 4.1.2 stock rooted base can be found HERE
Follow the steps to flash below:
Reboot into recovery
Make a full backup
Perform a complete wipe (cache, dalvik, factory reset, system) in TWRP
Flash the N7105 or SCH-I605 ROM you downloaded
Flash the SPR_GN2_Config zip file
Flash the Stock or Perseus kernel
Wipe Dalvik/Cache
Reboot System
If you happen to do exactly what I told you not to and flashed a rom that installed a modem/radio and you no longer can get signal, if you didn't brick it and can still boot into download mode, you will need THIS FILE to flash in ODIN to restore factory SPH-L900 specs.
WARNING: Data may or may not work if you do not change the mount point for the DATA partition to the correct one in the updater-script!
.
Holy crap. Nice. The Galaxy Note 2 is truly universal. Thanks for this.
Will this patch work with the miui roms and other aosp roms ? Or strictly the tw roms ? Thanks for the work either way
Sent from my SPH-L900 using Xparent Blue Tapatalk 2
Can we flash CM based ROMS as well? I am curious.
Sent from my SPH-L900 using xda premium
Which roms are safe to flash that doesnt install radios and modems
Sent from my SPH-L900 using xda premium
Epix4G said:
Will this patch work with the miui roms and other aosp roms ? Or strictly the tw roms ? Thanks for the work either way
Sent from my SPH-L900 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
jamice4u said:
Can we flash CM based ROMS as well? I am curious.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
it should work with MIUI Roms based on TW but not AOSP
mackentosh said:
Which roms are safe to flash that doesnt install radios and modems
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
roms that don't have the modem.bin in the zip file. if they do, you can delete it and edit the updater-script and you should be good to go.
Sounds a bit too advanced and risky for me personally but kudos for letting this over for us!
wow!!!!
so firmware means nada for this right? doesn't matter what firmware im on or rom was based in?
unslav3d said:
so firmware means nada for this right? doesn't matter what firmware im on or rom was based in?
Click to expand...
Click to collapse
nope....doesnt matter
t3project said:
nope....doesnt matter
Click to expand...
Click to collapse
Who's gonna be the brave soul to lead us to supremacy
Sent from my SPH-L900 using xda premium
mackentosh said:
Who's gonna be the brave soul to lead us to supremacy
Sent from my SPH-L900 or whatever its called using xda premium
Click to expand...
Click to collapse
jesus man y not flash some htc one roms while we r at it or perhaps some galaxy s 3 ****
skies the limit now!
It didnt work with the MIUI they have on ATT. ROM installed fine, but no data. I did the procedure in the OP step by step.
Possible cause - I think that even thought it is Touchwiz based, it uses MIUI base phone and framework (I am the one who got data to work on the port by lbx_mobbin_1 by tweaking the framework)
shiftr182 said:
It didnt work with the MIUI they have on ATT. ROM installed fine, but no data. I did the procedure in the OP step by step.
---------- Post added at 09:47 PM ---------- Previous post was at 09:45 PM ----------
It didnt work with the MIUI they have on ATT. ROM installed fine, but no data. I did the procedure in the OP step by step.
Possible cause - I think that even thought it is Touchwiz based, it uses MIUI base phone and framework (I got data to work on the port by lbx_mobbin_1 by tweaking the framework)
Click to expand...
Click to collapse
U sir have balls lol
Sent from my SPH-L900 using xda app-developers app
installed Clean rom for verizon... data and calls work but was getting random android and samsung process errors
chuko303 said:
U sir have balls lol
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
The zip replaces all the csc data with sprints....thats the main difference on these phones. Other than that, they are mostly the same. I have flashed a lot of crap on it from other carriers, so not too worried anymore.
shiftr182 said:
It didnt work with the MIUI they have on ATT. ROM installed fine, but no data. I did the procedure in the OP step by step.
Possible cause - I think that even thought it is Touchwiz based, it uses MIUI base phone and framework (I am the one who got data to work on the port by lbx_mobbin_1 by tweaking the framework)
Click to expand...
Click to collapse
you know, I didn't even think about that. you're probably right about the phone and framework
Sent from my SPH-L900 using xda premium
shiftr182 said:
The zip replaces all the csc data with sprints....thats the main difference on these phones. Other than that, they are mostly the same. I have flashed a lot of crap on it from other carriers, so not too worried anymore.
Click to expand...
Click to collapse
yea and a few libs and some other misc stuff
Sent from my SPH-L900 using xda premium
damnitdave said:
installed Clean rom for verizon... data and calls work but was getting random android and samsung process errors
Click to expand...
Click to collapse
I didn't say it was perfected yet but it works. lol
I got one fc on the stock Swedish rom in the post and never got it again. I modified cleanrom slightly and got the same fc but they never came back
Sent from my SPH-L900 using xda premium
yeah... hasn't poped up yet... thanks for this... keeps the options for roms open
Edit: only issue across the borad is that theres no wifi calling. But nfc, data, mms, calls and text working. Incase people wanted to know but not willing to risk their phone being brocked, I've now successfully flashed a couple custom roms for every carrier including international roms. I installed rom, then tmobile csc files to get data and what not working and a tmobile based kernel. I'm currently using an aosp themed rom in the sprint forum, been using all day and no issues. Milage may vary, but I didn't want to point out its possible to flash all note 3 roms. Cheers
Sent from my SM-N900T using xda app-developers app
Good topic. I was watching a YouTube vid about flashing the international LTE type roms and it seemed to work fine just as long as you used compulsion kernel and some kinda wifi/Bluetooth/NFC flashable fix. I had a note 3 a while back and I'm getting a new one on Monday (super excited) so I'm really curious about this cuz I'd really like to have some more rom options. Is your mms working too?
rambo8987 said:
Incase people wanted to know but not willing to risk their phone being brocked, I've now successfully flashed a couple custom roms for every carrier including international roms. I installed rom, then tmobile csc files to get data and what not working and a tmobile based kernel. I'm currently using an aosp themed rom in the sprint forum, been using all day and no issues. Milage may vary, but I didn't want to point out its possible to flash all note 3 roms. Cheers
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Mms, data, tethering, wifi everything works. What I did learn though is that it's best to start from stock tmobile rom in our dev section then once that's all booted up go to recovery and flash the rom you want without wiping data then cc files and tmo kernel. A few roms wouldn't get data unless I placed a call 1st after rebooting.
Sent from my SM-N900T using xda app-developers app
You mean everything works except WiFi calling or is that working as well, because that would be a first, me think.
pete4k said:
You mean everything works except WiFi calling or is that working as well, because that would be a first, me think.
Click to expand...
Click to collapse
All but wifi calling I'm sorry
Sent from my SM-N900T using xda app-developers app
Where do we get these CSC files, and has anyone made a flashable zip of em? If not, do we use root explorer or something like that?
Thanks again.
Where can I find the csc files
Sent from my SM-N900T using xda app-developers app
You don't need the csc files when flashing an international rom all you need is the nfc, bluetooth fix zip file
Sent from my SM-N900T using XDA Premium 4 mobile app
A tutt on flashing international roms will be so nice!!!!
Sent from my SM-N900T using Tapatalk
You can grab that file from stainless ROM in android development he has a flashable zip for WiFi Bluetooth NFC flashable fix also has the T-Mobile CSC files too go grab it and flash on much alohas
Here is the link http://forum.xda-developers.com/showthread.php?t=2499593
Sent from my SM-N900T using Tapatalk
That's all you have to do in order to use a 9005 ROM on a 900T? Seriously?
Has anyone tried using one of the SM-N9005 kernels? I know on the S4 I was able to use international kernels. Not sure about this phone though
EtherealRemnant said:
That's all you have to do in order to use a 9005 ROM on a 900T? Seriously?
Click to expand...
Click to collapse
Yes sir
Sent from my SM-N900T using Tapatalk
mr pnut said:
You don't need the csc files when flashing an international rom all you need is the nfc, bluetooth fix zip file
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What I noticed on certain roms data isn't available without the csc files. So just as a sure way to get things running right I suggest it
Sent from my SM-N900T using Tapatalk
pathtologos said:
Where do we get these CSC files, and has anyone made a flashable zip of em? If not, do we use root explorer or something like that?
Thanks again.
Click to expand...
Click to collapse
mastermindx85 said:
Where can I find the csc files
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Download Darthstalker ROM and pull the CSC folder from /system/csc/ then put it in the INT ROM of your choice. I do it this way since the CSC_TMO from miscom causes PHONE app to FC when trying to make a call. I use WINRAR to open and repack ROM files.
rambo8987 said:
What I noticed on certain roms data isn't available without the csc files. So just as a sure way to get things running right I suggest it
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I have flashed virtually every 9005 rom out there - and as long as you flash the Blue tooth Wifi Fix file mentioned earlier (from the stainless rom post) everything works beautfiully well.
I also use a variety of kernels - Compulsion - saber - and a few others work fine.
I had also flashed several Verizon ROMS - Hyper Drive is awesome -
BUT, I have never needed to flash the CSC files - Flash Rom - flash Wifi Fix - Flash Kernel - reboot - all is good.
Just thought I would share..
Don't forget that flashing an International Rom will wipe you internal storage.
Jfree3000 said:
Don't forget that flashing an International Rom will wipe you internal storage.
Click to expand...
Click to collapse
That isn't true of custom roms.
The reason why I change CSC files is because some roms prevent you from editting the APN protocol so you can change IP4 to IP6. It's all user preference really and depends on the ROM you're using.
-Sent from my TMO Samsung Galaxy Note 3 using Tapatalk
RMXO said:
That isn't true of custom roms.
The reason why I change CSC files is because some roms prevent you from editting the APN protocol so you can change IP4 to IP6. It's all user preference really and depends on the ROM you're using.
-Sent from my TMO Samsung Galaxy Note 3 using Tapatalk
Click to expand...
Click to collapse
Happened to me and several others when we flashed the Omega rom.
Jfree3000 said:
Happened to me and several others when we flashed the Omega rom.
Click to expand...
Click to collapse
I believe I read that if an international Rom uses aroma it will wipe internal storage. If it doesn't use aroma I think you should be fine
Sent from my SM-N900T using Tapatalk