PLEASE DO NOT BE ANNOYING AND COMPLAIN ABOUT THE QUESTION EVEN IF THERES A SIMILAR QUESTION THAT DOESNT MEAN IT HAS THE SAME ANSWER OR WHERE THE THREAD IS OR WHATEVER! im only in need of someone that wants to help but basically i tried to unlock my galaxy note 2 but i had to downgrade the firmware to do so cuz its not possible with 4.1.2 and i downloaded the files and followed instructions to a t from cellunlocker and after using the odin my phone is just stuck on the samsung logo screen.. my phone wasnt rooted yet and there is no way to get recovery or to do factory data reset or anything, i kept trying to install drivers nothing . All i can do is manually flash through odin and still get stuck, i tried a root file i tried unroot file i tried original firmware i tried cmw i tried everything and nothing works it just wont get past that point.. i can do the power+down volumekey+ home key and get into the downloading mode so i can use odin but thats it
I also tried the galaxy note 2 toolkit and still nothing
So you aren't rooted yet?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Factory reset
twanskys204 said:
Factory reset
Click to expand...
Click to collapse
it wasnt rooted when i tried bringing back the firmware... and i dont know how to factory reset when the os wont even start. no recovery no bootloader i attempted to root after being stuck on the boot through odin
thekidcalledl said:
it wasnt rooted when i tried bringing back the firmware... and i dont know how to factory reset when the os wont even start. no recovery no bootloader i attempted to root after being stuck on the boot through odin
Click to expand...
Click to collapse
I did that before. Press home + volume up + power that will put u in stock recovery, from there you should be able to factory reset wipe data. Before you downgraded from 4.1.2 to 4.1.1 you needed to full wipe because the factory image in Odin will just flash on top
scyr2355 got it...
your device is dirty...as you pushed images on top of each other. and this leaves old data behind.
the boot to stock recovery and a cache wipe with a factory reset should bring the phone back to life.....g
You could have just downgraded the radio and the secret menu is there again with the options to unlock... Hope this works out for you
Sent from my SGH-I317 using xda premium
Home+Vol Up+Power will put you into stock recovery as stated previously. You will need to use odin. Make sure drivers are installed on your computer and use a stock Image. Of course you must reset everything. I bricked my phone in similar fashion when I first started flashing. Now I flash all the time without issue. I recommend TWRP. A simple search will get you all the info you need.
thekidcalledl said:
PLEASE DO NOT BE ANNOYING AND COMPLAIN ABOUT THE QUESTION EVEN IF THERES A SIMILAR QUESTION THAT DOESNT MEAN IT HAS THE SAME ANSWER OR WHERE THE THREAD IS OR WHATEVER! im only in need of someone that wants to help but basically i tried to unlock my galaxy note 2 but i had to downgrade the firmware to do so cuz its not possible with 4.1.2 and i downloaded the files and followed instructions to a t from cellunlocker and after using the odin my phone is just stuck on the samsung logo screen.. my phone wasnt rooted yet and there is no way to get recovery or to do factory data reset or anything, i kept trying to install drivers nothing . All i can do is manually flash through odin and still get stuck, i tried a root file i tried unroot file i tried original firmware i tried cmw i tried everything and nothing works it just wont get past that point.. i can do the power+down volumekey+ home key and get into the downloading mode so i can use odin but thats it
Click to expand...
Click to collapse
Just spent five hours tonight trying to fix the same problem. I have a couple questions for you.
1. Which version of ODIN are you using. I recommend using the 3.07 version because it officially supports downloading the ATT I-317 firmware to your handset.
2. Are you using an official stock ROM? Or one that has been tampered with, De-OXED and/or injected with a root. If so, I would also recommend using a stock tar.md5 ROM from the Samsung-Updates or SamMobile websites.
On an unrelated note, I'm originally from Warwick :laugh:
PLEASE HELP!!!
I did the same thing. I tried to downgrade to 4.1.1 to unlock a customers device and now im stuck on the Samsung logo.... Ive never had a problem like this before and like I said this is a customers Note 2 and I really dont have the $$ to replace his device.... I tried to get to stock recovery and It wont go.... it just keeps looping the Note 2 logo.... what can I do.... Im SUPER scared.... ive rooted many many devices but only 1 downgrade and this never happened.... everything passed on Odin?? PLEASE HELP ME??
Factory reset
twanskys204 said:
Factory reset
Click to expand...
Click to collapse
I cant.... It wont let me go into recovery mode..
Just keep trying the 3finger combo... It goes volume up home power in that order..... Your gonna hafto play with it but it will boot. I promise
---------- Post added at 02:21 PM ---------- Previous post was at 02:18 PM ----------
U only hafto be scared if the device is unresponsive... What I don't understand is why ur using this method on a customers phone in the first place... Don't u sales people have ur codes?
---------- Post added at 02:23 PM ---------- Previous post was at 02:21 PM ----------
Thing is.... All u had to do is downgrade the modem to a 4.1.1 not the whole fw
twanskys204 said:
Just keep trying the 3finger combo... It goes volume up home power in that order..... Your gonna hafto play with it but it will boot. I promise
---------- Post added at 02:21 PM ---------- Previous post was at 02:18 PM ----------
U only hafto be scared if the device is unresponsive... What I don't understand is why ur using this method on a customers phone in the first place... Don't u sales people have ur codes?
Click to expand...
Click to collapse
Thank you so much.. it did go into recovery.... and I was getting nervous cause the samsung screen took a long time to finish the boot but it finally did... thank you so much man!!! You just saved me from getting my ass kicked by this customer..... THANK YOU!!!!
Did u get it unlocked?
twanskys204 said:
Did u get it unlocked?
Click to expand...
Click to collapse
Yes sir I just unlocked it now.... now time to root....this shouldnt be a problem.... I hope. I havent had problems rooting in the past, but now that I just said that I probably will, lol.
Thanks again, Ill keep you posted!
calm down man, its just a phone, its not life or death..
wase4711 said:
calm down man, its just a phone, its not life or death..
Click to expand...
Click to collapse
It's worse then that....It's dirty Jim.
LOL, I'm a dirty boy. I got caught flashing dirty. After all these (5) years of flashing I forgot to wipe / format.
Even some of the "seasoned," meddlers / flashers have one of those moments where they forget to wipe.
Can you get into download mode volume down power button and home button ...if you can use odin to flash back to stock
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Related
Hi, I have a SGH-T989D. Today, I edited build.prop to change phone model to S3 (SGH-I747M), in order to watch mobile TV (long story). However, when tried to reboot device, it doesn't start (actually screen just shows logo for a while, and turns to blank). I also have tried to take battery off and turned it again, but it is same situations over and over. Did I brick the phone? Please help. Many thanks!
No it's not bricked try wiping cache and dalvik then reboot. Else flash backup if you have one.
Sent from my SGH-T989 using Tapatalk
richardlibeau said:
No it's not bricked try wiping cache and dalvik then reboot. Else flash backup if you have one.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Thank you! But, my phone doesn't turn on. Can I still be able to do "wiping cache and dalvik"?
pychen2001 said:
Thank you! But, my phone doesn't turn on. Can I still be able to do "wiping cache and dalvik"?
Click to expand...
Click to collapse
As long as you can make it to the logo you can restart it. Do you have cwm or twrp recovery? If not do know how to get into download mode? What you did is soft bricked your phone. It can be fixed though.
Sent from my SGH-T989 using Tapatalk
richardlibeau said:
As long as you can make it to the logo you can restart it. Do you have cwm or twrp recovery? If not do know how to get into download mode? What you did is soft bricked your phone. It can be fixed though.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Thanks again. I will try it out.
richardlibeau said:
No it's not bricked try wiping cache and dalvik then reboot. Else flash backup if you have one.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Hi, did "Wipe catch/Dalvik catch", but device still doesn't boot. My phone is running stock ROM, but just rooted. I didn't "back-up" when I rooted the phone. Any further solution? Many thanks!
Try this web site galaxys2root.com and look for how to unroot unbrick and follow the instructions.
Hope this help
Sent from my SAMSUNG-SGH-T989 using xda premium
pychen2001 said:
Hi, did "Wipe catch/Dalvik catch", but device still doesn't boot. My phone is running stock ROM, but just rooted. I didn't "back-up" when I rooted the phone. Any further solution? Many thanks!
Click to expand...
Click to collapse
Hi,
The easiest way to fix it is reinstall firmware using odin. Remember after this you need to root the phone again (that's easy)
Download the firmware specific for your device from samMobile. http://www.sammobile.com/firmware/?page=3
Flash it using odin. You can find information on how to use odin here on XDA. Just Search for it.
After flashing is done set up the phone and root it again.
pychen2001 said:
Hi, did "Wipe catch/Dalvik catch", but device still doesn't boot. My phone is running stock ROM, but just rooted. I didn't "back-up" when I rooted the phone. Any further solution? Many thanks!
Click to expand...
Click to collapse
Install drivers for phone to computer. Install odin. Then turn on phone power button in and both volume up and down at same time until download mode appears on screen select yes to enter download mode . Hook phone to computer via usb cord. Open odin you should see com7 or whatever port you have it hooked in. Download any sgh-t989 odin zip. Some are gb some are ics etc. Extract the tar file to computer then place it to PDA in odin. Hit start odin should read tar and begin process of installing it to phone. You should see the progress in the top box on left. It should take 5-8 mins approx. Then phone will reboot into new rom. After this unplug phone you should be good to go.
Sent from my SGH-T989 using Tapatalk
---------- Post added at 07:33 PM ---------- Previous post was at 07:24 PM ----------
Oncet said:
Hi,
The easiest way to fix it is reinstall firmware using odin. Remember after this you need to root the phone again (that's easy)
Download the firmware specific for your device from samMobile. http://www.sammobile.com/firmware/?page=3
Flash it using odin. You can find information on how to use odin here on XDA. Just Search for it.
After flashing is done set up the phone and root it again.
Click to expand...
Click to collapse
Thanks for linking dude. I am trying to help him out but I am a little buzzed at this point. Rough day!!!! Kids, old lady, and school all driving me nuts bro.(Lol).
Sent from my SGH-T989 using Tapatalk
Thanks all! Will try it when I get time.
Finally, I brought my phone back. Appreciated all of you help. Now, one more question, if someone can help me out as well: what it is the safe way to modify phone model on build.prop file? I used "ES File Explorer", and ended up with above situation. I just changed ro.product.model. Thanks.
Is this hard brick or soft?
Sent from my Xoom using xda app-developers app
Bump
Sent from my Xoom using xda app-developers app
I'm not exactly sure what you mean. If it's bricked then it almost definitely is a soft brick. A hard brick is when the phone does not turn on at all and I believe when plugged into the charger there are no led lights or anything. In order to get rid of the soft brick you could try to use Odin to flash a JB tar. There's a guide to do that somewhere in here. I posted one myself on a different thread not too long ago so you could search by my name to find it.
porshce2 said:
I'm not exactly sure what you mean. If it's bricked then it almost definitely is a soft brick. A hard brick is when the phone does not turn on at all and I believe when plugged into the charger there are no led lights or anything. In order to get rid of the soft brick you could try to use Odin to flash a JB tar. There's a guide to do that somewhere in here. I posted one myself on a different thread not too long ago so you could search by my name to find it.
Click to expand...
Click to collapse
my phone can turn on and off but it is stuck on odin mode and its a yellow marked sign that said firmware upgrade encountered an issue, I cant boot into download mode or recovery.
LexLuger82 said:
my phone can turn on and off but it is stuck on odin mode and its a yellow marked sign that said firmware upgrade encountered an issue, I cant boot into download mode or recovery.
Click to expand...
Click to collapse
If you're stuck in Odin Mode, you should be able to flash a stock rom via Odin on your computer. Flash the stock LJ7 jellybean and don't mess with the count reset versions.
http://forum.xda-developers.com/showthread.php?t=2017470
Vanakatherock said:
If you're stuck in Odin Mode, you should be able to flash a stock rom via Odin on your computer. Flash the stock LJ7 jellybean and don't mess with the count reset versions.
http://forum.xda-developers.com/showthread.php?t=2017470
Click to expand...
Click to collapse
thanks
its failing when i flash with odin
Get you get into recovery?
ImEVO said:
Get you get into recovery?
Click to expand...
Click to collapse
nope just takes me to odin mode, and firmware upgrade encountered an issue, please select recovery mode in Kies & try again.
Unroot and start over my best bet
---------- Post added at 01:06 AM ---------- Previous post was at 01:04 AM ----------
Even if you pull battery and press the 3 button combo you still can't get into recovery?
ImEVO said:
Unroot and start over my best bet
---------- Post added at 01:06 AM ---------- Previous post was at 01:04 AM ----------
Even if you pull battery and press the 3 button combo you still can't get into recovery?
Click to expand...
Click to collapse
nope, just stuck on odin mode.
LexLuger82 said:
its failing when i flash with odin
Click to expand...
Click to collapse
This specifically... Have you tried another USB port? Have you tried another cable?
If you can't get anything else to work, this might be an actual brick.
What were you updating?
What were you running? Recovery, ROM, Modem?
Alias8818 said:
This specifically... Have you tried another USB port? Have you tried another cable?
If you can't get anything else to work, this might be an actual brick.
What were you updating?
What were you running? Recovery, ROM, Modem?
Click to expand...
Click to collapse
Odin Mode to flash a stock rom
Sent from my Xoom using xda app-developers app
Alias8818 said:
This specifically... Have you tried another USB port? Have you tried another cable?
If you can't get anything else to work, this might be an actual brick.
What were you updating?
What were you running? Recovery, ROM, Modem?
Click to expand...
Click to collapse
Got stuck flashing it
Sent from my Xoom using xda app-developers app
first confirm if the odin tar you are flashing has correct MD5 , i mean it got corrupt while downloading ( it happens a lot )
use a different , preferably new stock cable
use different usb port ( the com port should show up in odin window too )
if everything is fine flash the tar once more.
lord dredd said:
first confirm if the odin tar you are flashing has correct MD5 , i mean it got corrupt while downloading ( it happens a lot )
use a different , preferably new stock cable
use different usb port ( the com port should show up in odin window too )
if everything is fine flash the tar once more.
Click to expand...
Click to collapse
+1
And if possible, try a different computer (my desktop recognizes my phone fine, but my laptop only recognizes it in Linux)
Sent from my PG06100
This is perfect I need someone to test to confirm this will work on this error.
Grab cf-autoroot
Flash it in Odin and let it do its auto reboot, after it will probably hang at the sgs3 splash.
Pull battery
Reboot to stock recovery
Wipe data factory reset
Wipe cache
Try reboot
If reboot passes boot animation let it sit for about 10-15minutes before pulling battery(it may boot into rom at this point)
If it hangs at the sgs3 splash screen on reboot, pull battery boot to DL mode and flash an Odin one-click full restore.
Reboot
Hopefully profit like I did.
Sent from my SPH-L900 using Xparent Skyblue Tapatalk 2
In which stage of Odin does it get stuck?
I had an epic 4g which died that way, it just got stuck on flashing modem every time, tried everything, but it was just dead.
But I hope it's not your case
Good luck
Sent from my SPH-L710 using xda app-developers app
LexLuger82 said:
nope just takes me to odin mode, and firmware upgrade encountered an issue, please select recovery mode in Kies & try again.
Click to expand...
Click to collapse
same things goes wrong with me it doesn't go in download mode........help hoe to get into download mode
Hello alltogether,
The last 30 minutes I was near a heart attack, I really thought my S3 would be 90% dead.
NO recovery - The "encounter an issue...." warning - Only ODIN
But everytime I tried to flash anything (stock ROM or Recovery or whatever) it just stopped after a few seconds and ODIN freezed I had to pull the USB cable to do something new. I even let it without battery for a few minutes - nothing changed.
I was really dissapointed and I searched the Internet - after all I found the hint to try antother USB port and another cable.
I used a thin old cable and the front usb, not the back usb port.
So now ODIN, the original cable and the back USB port - I really didn't think it would make a difference! I tried to flash CF-Root with CWM and...
TATAAAAA! IT WORKED.
Man I am happy.
There's nothing more worse than not coming into recovery mode and odin not working!
BTW: Why it came how it came: I had (and still have) Omega 4.2.1 and Philz Touch Recovery, but I had problems with the root access to the system. I wanted to flash CF-CWM Root - That's all, this brought me in big trouble.
I never had these problems with the CF Root, I don't know why, but I do not really trust this Philz Touch Recovery, maybe I am hyper sensible now - I do not know.
I am happy, my phone is happy - everything is fine.
CU
lienot
Hi
My galaxy note 2 is stuck on the boot screen Samsung galaxy note 2 gt n7100.
I had tried 11 times flashing a recovery (cwm and twrp) onto the device, but every time when it rebooted after flashing with odin i could see some light brown lines flickering fast on the screen and then it would boot into my stock android system. Then i downloaded goomanager and could from there boot into recovery then i got into a cwm recovery. So i installed a custom rom (slimbean) and now i tried again to flash a cwm onto the device hoping it would work normally but now i am stuck on the galaxy boot screen.
I can get into the stockk android recovery when pushing power, home and vol down.
What should i do?
I tried several times flashing different recvories, and got into the philz touch one once, and then im back at where i started, it seems like it wont let me get into a custom recovery mode.
Can my phone be locked in any way?? Since every time i try to flash a custom recovery and then enter it but pressing the buttons it just puts me back to the stock recovery.
When you get into the Recovery Mode, do a format/clean cache
I have now managed to install cm 10.1 and gapps, now my problem is i dont get any cell signal and there is an error when searching for carriers.
My IMEI is unknown which i think might be a problem but what should i do?
I have no idea what to do mow, can someone please pointm e in the right direction?
Using my old laggy zte blade now and its killing me!
antton93 said:
I have now managed to install cm 10.1 and gapps, now my problem is i dont get any cell signal and there is an error when searching for carriers.
My IMEI is unknown which i think might be a problem but what should i do?
Click to expand...
Click to collapse
If you have a n7100 did you do a efs folder backup like the instructions and tutorials say to do..
Sent from my GT-N7105 using xda premium
---------- Post added at 05:10 PM ---------- Previous post was at 04:52 PM ----------
bearusa said:
If you have a n7100 did you do a efs folder backup like the instructions and tutorials say to do..
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Here are the guidelines. It clearly states to root your device first. Then take a EFS backup.
http://forum.xda-developers.com/showthread.php?p=40172458
Sent from my GT-N7105 using xda premium
No i dont have an EFS backup thats the problem.
I flashed stock firmware and everything on the phone, got it running.
My imei is the standard 0049 from corrupted imei?
So is there not anything i can do to like write my imei into some file?
I did this with a hex editor on my zte blade and then flashed the file to my phone and it worked but there is no such solution for the n7100?
Before you wipe and erase everything, try to figure out what's causing the overlook. ADB logcat and log files can help.
SenK9 said:
Before you wipe and erase everything, try to figure out what's causing the overlook. ADB logcat and log files can help.
Click to expand...
Click to collapse
I dont understand you now, what overlook?
Sorry, boot loop. Damn autocorrect.
SenK9 said:
Sorry, boot loop. Damn autocorrect.
Click to expand...
Click to collapse
I have managed to flash the phone with a stock firmware and everything and its working fine now except the wrong imei..
Hey guys, my S3 this past Friday the Wifi stopped working and I mean it will not allow me to turn it on. When I press the button it starts but does not activate.
I have been looking for a solution for this since Friday and nothing.
I have tried the following:
Restart and nothing
Airplane mode on and off and nothing
Several factory resets and cache wipes and nothing
Reloaded 4.3 thru Kies and nothing
Tried to load 4.1.1 thru Odin 3.07 and it fails which I dont know why
Tried some Wifi fixers from the market and nothing
Im lost now and cant seem to find any other info.
Envycycles said:
Reloaded 4.3 thru Kies and nothing
Click to expand...
Click to collapse
Please Clarify. Do you have 4.3 at present on the Phone ? If so did you get it through Stock update when Samsung Rolled out Earlier this year or did you flash it recently ? Kindly provide as many specifics as possible. Also provide your current Baseband
Before the Wireless Failed to turn on friday, did you flash anything ?
Its the stock 4.3 that downloaded on its own. I have never flashed anything to this phone its stock.
Sent from my SGH-T999 using xda app-developers app
What is the Baseband ?
perseus71 said:
what is the baseband ?
Click to expand...
Click to collapse
t999uvuenc2
Please Reboot to Recovery and Wipe Caches. If that does not help, do a factory Reset.
If you worry about Applications and Data, then use MyBackupPro
Perseus71 said:
Please Reboot to Recovery and Wipe Caches. If that does not help, do a factory Reset.
If you worry about Applications and Data, then use MyBackupPro
Click to expand...
Click to collapse
Perseus71, I have done this several times with no luck.
Factory Reset and then try the wireless before restore.
Perseus71 said:
Factory Reset and then try the wireless before restore.
Click to expand...
Click to collapse
After the factory reset I tried the wifi as soon as the phone boots but wifi wont turn on. is this what you are talking about?
Yes that's what I meant.
Please Re-Flash the Current firmware uvuenc2 via Odin. If you get stuck at boot after the flash, boot to stock recovery then wipe Cache.
Perseus71 said:
Yes that's what I meant.
Please Re-Flash the Current firmware uvuenc2 via Odin. If you get stuck at boot after the flash, boot to stock recovery then wipe Cache.
Click to expand...
Click to collapse
So I flashed uvuenc2 again and wiped the Cache again. No help, still no wifi.
This is really getting to be a pain in the ass as my 4g service sucks at the house and rely on wifi.
Also I read last night not to flash 4.1.1 if you already have 4.3 uvuenc2 as it will brick the phone. Is there a way around that?
I suspect hardware issues. Particularly when 4G does work.
There are ways to check for Hardware issues, but wouldn't want to recommend that if Warranty option is open.
Please raise a Warranty Request Or call T-Mo.
Have you tried doing Odin to 4.3 stock?
Sent from my SGH-T999 using XDA Premium 4 mobile app
Envycycles said:
So I flashed uvuenc2 again and wiped the Cache again. No help, still no wifi.
This is really getting to be a pain in the ass as my 4g service sucks at the house and rely on wifi.
Also I read last night not to flash 4.1.1 if you already have 4.3 uvuenc2 as it will brick the phone. Is there a way around that?
Click to expand...
Click to collapse
Try another factory reset since youve reflashed the firmware. Data is still left over from before.
You can also try to see if you see anything going on with logcat. Theres apps that can help with this. Lots of logcat info on xda and elsewhere if you need it.
You cannot flash older firmware, but you can flash older roms. Try flashing a 4.1.2 MD5 based rom. This will trip the warranty bit if that matters.
Sent from my SGH-T999 using Tapatalk
When that happens to me with stock rom I reinstall the firmware with odin and it always fix it.
---------- Post added at 08:39 PM ---------- Previous post was at 08:34 PM ----------
Envycycles said:
So I flashed uvuenc2 again and wiped the Cache again. No help, still no wifi.
This is really getting to be a pain in the ass as my 4g service sucks at the house and rely on wifi.
Also I read last night not to flash 4.1.1 if you already have 4.3 uvuenc2 as it will brick the phone. Is there a way around that?
Click to expand...
Click to collapse
Put your device in download mode and use odin to reinstall your firmware. That shoud fix your issue
---------- Post added at 08:49 PM ---------- Previous post was at 08:39 PM ----------
Put your device in download mode and use odin to reinstall your firmware. That shoud fix your issue
guys,
I am trying to return my Note. 8.0 GT-N5110 to stock. I am using Odin and after every reboot its getting boot looped.
I am using Auto Reboot and F.Reset Time. I am using PDA and HOME_N5110XXCNC1_N5110ZTOCNC1.tar.md5
I really am having a tough time with this. I sold it to someone and want to bring back to complete stock.
Am using the wrong Odin file?
I checked all of the guides here but not having any luck. Any help would be greatly appreciated.
Ryan
rlasalle15 said:
guys,
I am trying to return my Note. 8.0 GT-N5110 to stock. I am using Odin and after every reboot its getting boot looped.
I am using Auto Reboot and F.Reset Time. I am using PDA and HOME_N5110XXCNC1_N5110ZTOCNC1.tar.md5
I really am having a tough time with this. I sold it to someone and want to bring back to complete stock.
Am using the wrong Odin file?
I checked all of the guides here but not having any luck. Any help would be greatly appreciated.
Ryan
Click to expand...
Click to collapse
You want to get N5110UEFMI1_N5110XARFMI1_HOME.tar.md5
Your settings are fine as long as you are running Odin 3.07
gooberdude said:
You want to get N5110UEFMI1_N5110XARFMI1_HOME.tar.md5
Your settings are fine as long as you are running Odin 3.07
Click to expand...
Click to collapse
I grabbed that one too...Same thing. Bootloop after the auto reboot
rlasalle15 said:
I grabbed that one too...Same thing. Bootloop after the auto reboot
Click to expand...
Click to collapse
I may have been using an older version of odin...sorry lol never return these things to stock. Trying again.
gooberdude said:
You want to get N5110UEFMI1_N5110XARFMI1_HOME.tar.md5
Your settings are fine as long as you are running Odin 3.07
Click to expand...
Click to collapse
Yea using Odin 3.07 it says it Passed but it just seems to be bootlooping on Samsung boot ani. I have no idea why.
rlasalle15 said:
Yea using Odin 3.07 it says it Passed but it just seems to be bootlooping on Samsung boot ani. I have no idea why.
Click to expand...
Click to collapse
Do you still have a custom recovery? Check to see if you can still get into it.
If so, clear out devlik cache, and format your partition.
If not, there was another thread about this in Q&A I think.
rlasalle15 said:
Yea using Odin 3.07 it says it Passed but it just seems to be bootlooping on Samsung boot ani. I have no idea why.
Click to expand...
Click to collapse
Got it..went into Recovery and factory reset. All is good..thank you for your help!
rlasalle15 said:
Got it..went into Recovery and factory reset. All is good..thank you for your help!
Click to expand...
Click to collapse
Can I get a link to a Return to Complete Stock forum? I've been looking but can't find it. I rooted a long time ago and never have had to unroot, but I I'm selling it.
---------- Post added at 03:29 PM ---------- Previous post was at 03:22 PM ----------
Nevermind. Found it a few pages back in general. It should probably be stickied.
Sent from my SCH-I605 using xda app-developers app
kude87 said:
Can I get a link to a Return to Complete Stock forum? I've been looking but can't find it. I rooted a long time ago and never have had to unroot, but I I'm selling it.
Click to expand...
Click to collapse
No need, as this is my condensed way that works every time.
Here is my steps...
Go into SuperSU and have it do a clean removal.
If triangle away is installed, go into triangle away and have it uninstall.
Go into settings and perform a factory reset.
Shut down.
If you have a custom recovery you can have it do a Format Partition, and Clear Devlik Cache to make sure things are wiped, and reboot into factory down loader.
If no custom recovery, start in factory down loader.
Use Odin 3.7 and the ROM posted in this thread.
You will then have a stock Note 8.0... once you boot and go through the settings, you will need to do a factory reset to make it clear everything for the new user to go through once they own it.