Hi, I am having trouble flashing CM10.1 Nightles on my Note 2. This is what I have done so far:
- Flash the latest official ClockworkMod-Recovery DONE
- Copy GApps and CM10.1 ZIPs to your SDCard DONE
- Boot into Recovery DONE
- Flash CM10.1 zip from SDCard SAYS FAILED?!?
I have the Canadian version Telus Mobility Samsung Note 2. I am trying to upgrade from CLEANROM to CM10,1. I got the instructions and ROM from here:
http://forum.xda-developers.com/showthread.php?t=2105917
I would try downloading a new copy of the zip and trying to flash again. I've had this problem before and that has worked. If not, try reflashing your recovery and try again.
---------- Post added at 11:26 AM ---------- Previous post was at 11:14 AM ----------
Also, make sure you wipe dalvik cache, cache, and do a full wipe/factory reset before flashing.
Related
new to rooting, flashing, etc.
Tried flashing CyanogenMod 6, I believe, using ROM Manager app. I downloaded the ROM to SD card and followed instructions to install. Now it's been stuck booting for an hour. I tried taking the battery out and going into recovery but it just gets stuck at the Odin screen with 'do not turn off target' message.
Any assistance would be appreciated.
Thanks everyone.
CyanogenMod 6??? Why not CM9 or CM10? Did you root the phone ? Follow this tread http://forum.xda-developers.com/showthread.php?t=1739426
---------- Post added at 06:14 PM ---------- Previous post was at 06:06 PM ----------
Also try to boot into recovery and wipe data/factory reset, wipe cache, wipe dalvik and fix permissions
tonymtl said:
CyanogenMod 6??? Why not CM9 or CM10? Did you root the phone ? Follow this tread http://forum.xda-developers.com/showthread.php?t=1739426
---------- Post added at 06:14 PM ---------- Previous post was at 06:06 PM ----------
Also try to boot into recovery and wipe data/factory reset, wipe cache, wipe dalvik and fix permissions
Click to expand...
Click to collapse
I'm not sure what version I attempted to install. It could've been CM9/10...
I did root the phone prior to doing all of this. I did as you suggested: go into recover and wipe data/factory reset, wipe cache, wipe dalvik and fix permissions and when I reboot the phone, the Samsung logo pops up and vibrates, then nothing. I keep having to take out the battery to restart.
john.s.kim79 said:
I'm not sure what version I attempted to install. It could've been CM9/10...
I did root the phone prior to doing all of this. I did as you suggested: go into recover and wipe data/factory reset, wipe cache, wipe dalvik and fix permissions and when I reboot the phone, the Samsung logo pops up and vibrates, then nothing. I keep having to take out the battery to restart.
Click to expand...
Click to collapse
You can go to the tread I posted before, download and flash with odin stock rooted rom it should work. It did for me.
tonymtl said:
You can go to the tread I posted before, download and flash with odin stock rooted rom it should work. It did for me.
Click to expand...
Click to collapse
I downloaded the file to my desktop and when I use Odin to load, it cannot find the file type. I think it has to be a .tar file.
Thanks
Flash the rom twice, then see if that works.
Usually in rom manager it detects your phone and WON'T let you dl a rom not specific to your phone.
Sent from my SAMSUNG-SGH-I747 using xda premium
Wipe data, system, and cache. install cm. Install gapps, reboot
Sent from my Nexus 7 using xda premium
john.s.kim79 said:
I'm not sure what version I attempted to install. It could've been CM9/10...
I did root the phone prior to doing all of this. I did as you suggested: go into recover and wipe data/factory reset, wipe cache, wipe dalvik and fix permissions and when I reboot the phone, the Samsung logo pops up and vibrates, then nothing. I keep having to take out the battery to restart.
Click to expand...
Click to collapse
I suggest that you pay more attention to what your flashing and do some more reading. You can end up with a paperweight easily being this careless
Sent from my SAMSUNG-SGH-I747 using xda premium
john.s.kim79 said:
I downloaded the file to my desktop and when I use Odin to load, it cannot find the file type. I think it has to be a .tar file.
Thanks
Click to expand...
Click to collapse
You need to download a 7z file extractor its like zip or rar, Extract the stock_root67.tar from the .7z file you downloaded.
Hi guys
I am using a Rogers GS3 - rooted using odin, installed ClockworkMod Recovery.
Transferred the latest stable Cyanogenmod9 zip to the SDcard
Booted into CWMRecovery, updated using the stable C9 zip and then tried to re-boot the phone, but it just gets stuck on the CyanogenMod intro screen (the blue circle going round).
Did I miss a step. I watched a video saying I needed to clear the cache, so I pulled the battery out, booted back to CWMRecover, cleared the cache, the updated with the C9 zip and tried again, same result, boots only into the Cyan intro screen.
help pleeeease
Boot into recovery, factory data reset, move to mountsand storage and format system, them clear cache and dalvik cache (that one is under advanced), then reflash the cm9 zip
---------- Post added at 10:01 PM ---------- Previous post was at 09:20 PM ----------
http://forum.xda-developers.com/showthread.php?t=1915194
This may help too
Seems to be the only ROM I'm able to successfully use on my Galaxy Nexus is the ASOP (rootzwiki(dot)com/topic/36706-romaosp431101113-shiny-ota-like-stock-android-431-jls36i-no-bugs). I'm coming from a 4.2.1 ROM, trying to get to a 4.3.1 ROM. Every time I load an AOKP, CYN, or PA ROM, it boots straight to the home screen completely bypassing the initial setup and my Google account. When I try to manually add my Google account, I get an error message about the ASOP Android keyboard not responding. If you could shed some light on what I might be doing wrong. These are the steps I've done:
Using ClockworkMod Recovery 6.0.2.3 (I know 6.0.4.3 is out)
1. Factory reset/wipe data
2. Wipe Cache Partition
3. Format System within Mounts and Storage
4. Format Cache within Mounts and Storage
5. Wipe Dalvik Cache within Advanced
6. Installing Rom (a 4.3.1 rom)
7. Installing Gapps (latest gapps-jb-2013813-signed.zip)
8. Rebooting
I've read online where some people have wiped cache and davlik cache after installing the ROM and gapps. I've tried that too and still have the same result.
As long as you are using a 4.3 or 4.3.1 ROM with 4.3 gapps, All you should have to do is wipe data, wipe cache, wipe dalvik, flash ROM and flash gapps. You can skip your step 3 and step 4. I've never had your experience with any ROM I have used. If it continues, maybe start from scratch and return to stock, root and try flashing again.
I was trying to update from a 4.2.1 ROM to a 4.3.1 ROM also and was having issues also.
I'm no stranger flashing ROMs so I know I'm using the correct gapps.
My problem is the radios.
When I flash a new ROM I lose service completely.
I'm doing this to another family member's phone, which used to be mine, but it's been so long I can't remember if the radios need updated also. If they do, where can I find them?
If the problem isn't the radios... any ideas what it could be?
Sorry for hijacking the thread but it seemed like a similar problem.
Thanks in advance.
Radios here -
http://forum.xda-developers.com/showthread.php?t=1890585
---------- Post added at 01:10 PM ---------- Previous post was at 12:48 PM ----------
Radios here -
http://forum.xda-developers.com/showthread.php?t=1890585
I had already gotten the radios from there but can't seem to get any of them to work.
Seems it's a common issue.
Is it better to just revert to 4.2.2.?
Hi ,
I installed CWM and I took the backup of the stock rom.
then flashed with new boot.img and installed MIUI rom, this is working fine.
I did wipe data/factory reset, wipe cache partition and Wipe Dalvik Cache. after that I restored stock rom using CWM, restore went fine.
when I reboot phone stuck in boot loop with htc logo.
did I miss something while restoring ????
glaber said:
Hi ,
I installed CWM and I took the backup of the stock rom.
then flashed with new boot.img and installed MIUI rom, this is working fine.
I did wipe data/factory reset, wipe cache partition and Wipe Dalvik Cache. after that I restored stock rom using CWM, restore went fine.
when I reboot phone stuck in boot loop with htc logo.
did I miss something while restoring ????
Click to expand...
Click to collapse
If your phone is not S-Off then restore can't update boot partition and you have to flash old boot.img manually.
The same way as you did when installing MIUI rom but different kernel image (boot.img compatible with stock rom).
kvestas said:
If your phone is not S-Off then restore can't update boot partition and you have to flash old boot.img manually.
The same way as you did when installing MIUI rom but different kernel image (boot.img compatible with stock rom).
Click to expand...
Click to collapse
My Phone has s-on....
I will find the stock rom supported kernel and flash before restoring the stock rom.
or
I will try to make s-off and restore.
either of one would be fine rite?
thanks:good:
glaber said:
My Phone has s-on....
I will find the stock rom supported kernel and flash before restoring the stock rom.
or
I will try to make s-off and restore.
either of one would be fine rite?
thanks:good:
Click to expand...
Click to collapse
Yes, either should be fine., but the first method is much more easier I guess.
---------- Post added at 09:28 AM ---------- Previous post was at 09:26 AM ----------
And you may flash the right kernel even after restoring or flashing a rom.
kvestas said:
Yes, either should be fine., but the first method is much more easier I guess.
---------- Post added at 09:28 AM ---------- Previous post was at 09:26 AM ----------
And you may flash the right kernel even after restoring or flashing a rom.
Click to expand...
Click to collapse
Thanks dude..
I got my phone back
Hi, I have an Oppo Find 7 model X9076 (monitor 2k) with original ColorOS v2.1.5i (android 5.0) and unified partitions (32 GB total space not 3+29).
I wanted to upgrade it to omni-7.1.1-20170402.
I have TWRP installed and I have the following zip files: "removelvm_find7_FULL_WIPE.zip", "setuplvm_find7_FULL_WIPE_09012014.zip", "omni-7.1.1-20170219-find7-WEEKLY.zip" (i also have the latest one), "open_gapps-arm-7.1-micro-20170223.zip" (i also have the stock one), and "UPDATE-SuperSU-v2.46.zip".
Question time:
1- I tried flashing supersu (version 2.46), everything goes fine, i clean chace/dalvik than reboot, I start the supersu app and it asks me to update , i try updating but always fail and the phone keeps being unrooted. How can I solve this issue? Is it possible to upgrade to omni 7.1.1 without root?
2- In order not to have issues do i have to flash omni than flash the lvm zip or viceversa?
3- In order to have one single partition of 32GB which file do i have to flash? setuplvm or removelvm?
Thanks everyone for helping such a noob-modder.
Flash latest twrp image. If you already have unified partition through colorOS, then no need to flash setuplvm or removelvm. Just wipe data, system, cache, dalvik and flash latest Omni followed by gapps and then in the end flash latest SuperSu 2.79. Reboot and pray for yourself
Hello I have an Oppo Find 7s x9076 too.
I don't have unified storage on my phone.
My question is, what I have to do to get lvm?
Is something like that.?
Steps:
1. Nandroid backup,
2. flash setuplvm_find7_FULL_WIPE_10282014.zip
3. Reboot into TWRP
4. Flash OmniROM, gapps and superSU (can I flash the 3 at same time?)
Or I have to make a full wipe before all this steps?
Maasik_____Pt said:
Hello I have an Oppo Find 7s x9076 too.
I don't have unified storage on my phone.
My question is, what I have to do to get lvm?
Is something like that.?
Steps:
1. Nandroid backup,
2. flash setuplvm_find7_FULL_WIPE_10282014.zip
3. Reboot into TWRP
4. Flash OmniROM, gapps and superSU (can I flash the 3 at same time?)
Or I have to make a full wipe before all this steps?
Click to expand...
Click to collapse
You can do a full wipe, it is adviced but it will be wiped anyway in step 2
Many thanks. Can I flash the 3 at the same time?
(rom gapps and SU). In the end I have to clean dalvik
cache?
---------- Post added at 10:27 AM ---------- Previous post was at 09:51 AM ----------
Jan.Pul said:
You can do a full wipe, it is adviced but it will be wiped anyway in step 2
Click to expand...
Click to collapse
This will go fine with OmniRom 8.0 by Maxwen
or official Omnirom 7.1.2???
---------- Post added at 10:42 AM ---------- Previous post was at 10:27 AM ----------
Jan.Pul said:
You can do a full wipe, it is adviced but it will be wiped anyway in step 2
Click to expand...
Click to collapse
Can I wipe all except external sd
(cache, system, data, dalvik, Android security and internal SD)???
My rom for now is ColorOS 2.1.5i