Develop Bugs

[Q] Unbrick phone need help!

Can anyone tell me what do I need to do to unbrick my phone.
I not really sure that my phone is bricked or what. cuz I tried to install android 4.2 but I not use Clockmod recovery and there are some problem with it. but now, when I turn my phone on, it just keep reset my phone, it doesn't show up the android screen.
Well! I try to search some unbricked topics but i don't understand how to do it.
I already got my Fastboot + ADB, RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.29.771.11_Radio_1.1204.105.14H_release_260888_signed
I not really that my RUU is the lastest one or not my phone is htc one x uk, three carrier
I just need to know what do I have to do with these things :-ss

Did u flash the boot.img with fastboot.commands ???
And what recovery are u using ???

Need some more info to work with:
Bootloader unlocked?
CWM installed?
Did you flash boot.img through fastboot?
Full wipe before install?
ROM name?
Are you intending to continue installing 4.2 or go back to stock?
E:ninja'd

TToivanen said:
Need some more info to work with:
Bootloader unlocked?
CWM installed?
Did you flash boot.img through fastboot?
Full wipe before install?
ROM name?
Are you intending to continue installing 4.2 or go back to stock?
E:ninja'd
Click to expand...
Click to collapse
:banghead: :sly: here we go again ....
LOL

MarcelHofs said:
:banghead: :sly: here we go again ....
LOL
Click to expand...
Click to collapse
You can have it since you were the fist one to post. :laugh:

TToivanen said:
You can have it since you were the fist one to post. :laugh:
Click to expand...
Click to collapse
he's offline now

my phone is unlock bootloader and its unlock ... i want to continue install android 4.2
CWM installed? i didn't install what's why my fone is bricked
Did you flash boot.img through fastboot? yes I do but because i didn't have CWM so ....
Full wipe before install? i think i not
ROM name? ROM ??? I don't know
I just wonder how to get android back >"< if it 4.2 it would be good but if be back to sock then it's fine

What did you actually install to get your phone in this state?
"android 4.2" isn't good enough answer.
Sent from my HTC One X

The steps are
Unlock bootloader (check)
Flash cwm custom recovery with fastboot commands
Flash the boot.img of the desired rom with fastboot commands
Do a full wipe in recovery
Install the rom.zip in recovery
Do you understand this all ?

All I try to bricked my fone is I followed this guide >"<
http://www.theandroidsoul.com/install-android-4-2-on-your-htc-one-x-downloads-and-guide/
Click to expand...
Click to collapse
and i get stuck on step 13 because i didn't install CWM.
like what you says Flash cwm custom recovery with fastboot commands
how do I flash cwm like what you said >"<
Im sorry but I really noob on this stuff >"<

Download this file
http://db.tt/Krlm4dPs
And put it in your fastboot folder on the pc, put your phone in fastboot USB mode and do these commands
Fastboot erase cache
Fastboot flash recovery recoveryname.img
Fastboot erase cache
With this recovery you can mount the phone as USB diskdrive to copy over the rom to install. You already know how to flash the boot.img ?

nope it's would be really greats if u show me step by step like that xDDD thankss
and i don't know wt to do with boot.img >"<

start reading carefully here
http://forum.xda-developers.com/showthread.php?t=1843585
I'm off to bed now, really need to get some sleep
I'm gladly answering your questions and helping you all the way .....but it's bedtime now :thumbup:

ONE Quick question: how do i need to use these code ?? on command promt ? and 1 really stupid question is I stuck on get to the direct folder. I contain it on my C driver and on android folder...
Fastboot erase cache
Fastboot flash recovery recoveryname.img
Fastboot erase cache
1 PROBLEM
Fastboot flash recovery recoveryname.img
error can't not load "recovery"

No you guys have any complete guides on how to unbrick htc one x ? im a bit confuse on those steps u told me

The link i gave you is a full guide to flash a custom rom.....start at page 1
Really all info is there !
You need to put the recovery.img in the fastboot folder on the pc....
Navigate to the folder and open a dosprompt there
Then do the command
Fastboot devices
If your serial pops up its good ....
Otherwise you need to install HTC sync and then uninstall HTC sync and leave the drivers .... And if that doesn't work you need the java SDK platform !

Connect your HTC One X to your USB cable and then to the PC, choose Disk Drive, next, copy and paste the CWM-SuperSU-v0.94.Zip file onto the root of the SD card for your HOX. Once that's on there, change the phones USB connection to charge only.
Click to expand...
Click to collapse
i understand that but my android OS not even turn no >"< how do I suppose to change to disk drive. and I try to install sdk,htc sync manager but it doesn't work .
im on fastboot usb mode but my lap doesn't detect my fone

But i don't understand this : you flashed the boot.img with fastboot command.....why does the recovery image doesn't work then and why do you have a lost connection ?
You need to have the phone in fastboot USB mode when flashing boot.img and recovery's ! Let's get back to basic .....
At what point are you now : it's bootlooping but you can acces the bootloader ?

no im on fastboot usb mode..
like what you said and from the guide:
copy and paste the CWM-SuperSU-v0.94.Zip file onto the root of the SD card for your HOX
Click to expand...
Click to collapse
but I have problem with connect usb to the pc. it's show up at unspecified, i try to troubleshoot it but it doesn't help. .. still finding the solution

nkenny94 said:
but I have problem with connect usb to the pc. it's show up at unspecified, i try to troubleshoot it but it doesn't help. .. still finding the solution
Click to expand...
Click to collapse
Better look here then, there re more people with that what you have just described.

[Q] HTC One X Possibly Bricked

Hi all,
I think my friend and i bricked his phone last night.
Its the HTC one x and we used the Hasoon2000 method. I think the problem was the perm root part of the software said unable to connect to device.
I searched around and someone said to flash supersu and that should do it. However after flashing that we did a backup of the phone in clockwork recovery.
We then tried flashing the viperX rom which we did on another one X and worked fine, it got to 1% and restarted. It then stuck at the quietly brilliant page.
We can't get it to boot into recovery but can get it to go to the bootloader. We tried to do the fastboot command from the PC to erase fastboot cache but it couldnt connect to the device.
I have read this thread http://forum.xda-developers.com/showthread.php?t=1764421 and but it is about the AT&T version, what recovery image would i need?
Also how can i tell if it is hard bricked or soft bricked? As i'm worried it could be hard bricked cause i couldnt erase the fastboot cache.
Any help is appreciated, and sorry if this is answered somewhere else but i couldnt see an answer.

Bit more bootloader info:
Unlocked
S-On
Hboot 1.39.0000
If possible i'd like to help my friend finish rooting it but if its easier put it back to normal.
Again thanks if anyone can help me.

What does the bootloader say, EVITA or ENDEAVORU ?

It says endeavoru

Then stay away from the HTC one XL forum, its a different phone !!!
Do you have the HTC drivers installed and a folder on the pc with the fastboot files ?
Place these files in a folder like this
http://db.tt/ldx3qOOU
C:\fastboot\files i gave you
Then put the phone in the bootloader and open a command prompt inside the fastboot folder on the pc and type
Fastboot devices
If a serial comes up we are good to go !

Mr Hofs said:
Then stay away from the HTC one XL forum, its a different phone !!!
Do you have the HTC drivers installed and a folder on the pc with the fastboot files ?
Place these files in a folder like this
http://db.tt/ldx3qOOU
C:\fastboot\files i gave you
Then put the phone in the bootloader and open a command prompt inside the fastboot folder on the pc and type
Fastboot devices
If a serial comes up we are good to go !
Click to expand...
Click to collapse
Well we installed the HTC drivers with the Hasoon tool so yes. Just meeting my friend now so i'll put these files in a folder and try that straight away.
Thanks, will let you know shortly.

DannyBLOL said:
Well we installed the HTC drivers with the Hasoon tool so yes. Just meeting my friend now so i'll put these files in a folder and try that straight away.
Thanks, will let you know shortly.
Click to expand...
Click to collapse
Just connected it to my laptop and the pc said fastboot drivers installed and made the noise of a device connecting and disconnecting.
Haven't tried what you said yet as it said battery is too low on the bootloader. I've now plugged it in a plug socket and have it on the htc quietly brilliant screen. I take it this should still charge it?

DannyBLOL said:
Just connected it to my laptop and the pc said fastboot drivers installed and made the noise of a device connecting and disconnecting.
Haven't tried what you said yet as it said battery is too low on the bootloader. I've now plugged it in a plug socket and have it on the htc quietly brilliant screen. I take it this should still charge it?
Click to expand...
Click to collapse
Is it possible for you to turn the phone off?
IF so it should charge a bit quicker that way
Also just to clarify, how did you try to install Viper X on your phone?

Hmm no, if its bootlooping then yes. Is the bootloader unkocked and do you have a custom recovery installed yet ?
In case you have a custom recovery installed put the phone in the recovery it will charge the batt in there .....
Otherwise put the phone in the bootloader and run this file from within the fastboot folder
http://db.tt/aLqeTpPO
It will continuously reboot the phone and charge it little by little, leave it like this for an hour or so.

No, if i go into bootloader and fastboot then power down it turns itself back on if its plugged in.

Mr Hofs said:
Hmm no, if its bootlooping then yes. Is the bootloader unkocked and do you have a custom recovery installed yet ?
In case you have a custom recovery installed put the phone in the recovery it will charge the batt in there .....
Otherwise put the phone in the bootloader and run this file from within the fastboot folder
http://db.tt/aLqeTpPO
It will continuously reboot the phone and charge it little by little, leave it like this for an hour or so.
Click to expand...
Click to collapse
The bootloader says unlocked, and we had CWM recovery installed it no longer loads up, it just reboots itself.
I'm confused by what you mean, what command would i use to run that file from the fastboot folder and after doing that do you mean i should leave it charging from the laptop?
Link to image of the bootloader if this helps - http://imgbin.org/index.php?page=image&id=11217

Just connect the phone to the pc and put the phone in the bootloader then execute the .bat file from the fastboot folder (download it and move it in there)
It should start rebooting the phone over and over again.
Edit : I see fastboot usb in the bootloader that's good ! :thumbup:
We need to get the batt charged so we can reflash the recovery, that will probably solve it all.

Mr Hofs said:
Just connect the phone to the pc and put the phone in the bootloader then execute the .bat file from the fastboot folder (download it and move it in there)
It should start rebooting the phone over and over again
Click to expand...
Click to collapse
Ok this is working. It doesn't say about low battery anymore on the bootloader. But ill leave it charging for a bit. What is my next step?

Next step is to reflash the recovery, download this one
http://db.tt/Krlm4dPs
Rename it to recovery.img and Copy the file in the fastboot folder. Put the phone in the bootloader again and flash the recovery
All these commands are executed from the command prompt inside the fastboot folder.
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then enter the recovery by pressing hboot one time (confirm with powerbutton) then press recovery

Ignore me Mr Hoffs beat me to it

Mr Hofs said:
Next step is to reflash the recovery, download this one
http://db.tt/Krlm4dPs
Rename it to recovery.img and Copy the file in the fastboot folder. Put the phone in the bootloader again and flash the recovery
All these commands are executed from the command prompt inside the fastboot folder.
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then enter the recovery by pressing hboot one time (confirm with powerbutton) then press recovery
Click to expand...
Click to collapse
YES! That has worked, we are in recovery. What can i do now? Should i try flashing ViperX or is the phone not permarooted?
Last time i tried to do permroot with the Hasoon2000 tool. That didnt work and i just flashed superSU, i think i must be missing something.
Thanks so much for your help!

If you do this, you will be good. Maybe you van skip some steps because you already did them before but I mention them anyway
Download the viper x JB rom, open it with an unpack program and copy the boot.img and place it in the fastboot folder. Copy the rom.zip to the phone (mount as usb drive in the mounts & storage part of the recovery)
Now put the phone back in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot img
Fastboot erase cache
Enter the recovery again and do a full wipe , also wipe the dalvik cache under the advanced tab. Then install the rom.zip with the
Install zip from sdcard menu !
Install the viper and choose in the aroma installer of the rom FULL WIPE and the question you get about the custom kernel you answer with NO !
Don't worry about root, the rom is standard rooted
Good to go mate

Mr Hofs said:
If you do this, you will be good. Maybe you van skip some steps because you already did them before but I mention them anyway
Download the viper x JB rom, open it with an unpack program and copy the boot.img and place it in the fastboot folder. Copy the rom.zip to the phone (mount as usb drive in the mounts & storage part of the recovery)
Now put the phone back in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot img
Fastboot erase cache
Enter the recovery again and do a full wipe , also wipe the dalvik cache under the advanced tab. Then install the rom.zip with the
Install zip from sdcard menu !
Install the viper and choose in the aroma installer of the rom FULL WIPE and the question you get about the custom kernel you answer with NO !
Don't worry about root, the rom is standard rooted
Good to go mate
Click to expand...
Click to collapse
Thanks so much mate!
Worked flawlessly. Seriously can't thank you enough!

Nice :thumbup:
Have fun with it !
CASE CLOSED !

Stuck in bootloop & can't connect to pc.

I was flashing my phone back to stock and got ms5 . Now the phone has disconnected from the pc and won't reconnect.
was on Renovate 5.8 tried reflashing the rom now just boot loops. Any ideas how to connect to the pc again.
Need all the help I can get and thank you in advance everyone.

Can you enter the bootloader by holding the power button and the volume down button together until it restarts and enters the bootloader ?

Mr Hofs said:
Can you enter the bootloader by holding the power button and the volume down button together until it restarts and enters the bootloader ?
Click to expand...
Click to collapse
Yes I can get in to the bootloader. Keep getting USB failed when it opens.

And at that time you have the cable to the pc connected ? What happens if you enter the recovery from the bootloader

Mr Hofs said:
And at that time you have the cable to the pc connected ? What happens if you enter the recovery from the bootloader
Click to expand...
Click to collapse
Can also get into recovery, just no PC connection.

Oke and you can mount the sdcard as a mass storage device within the recovery ?
And what connection did exactly lost then. The fastboot usb connection for flashing boot.img files ?

Mr Hofs said:
Oke and you can mount the sdcard as a mass storage device within the recovery ?
And what connection did exactly lost then. The fastboot usb connection for flashing boot.img files ?
Click to expand...
Click to collapse
Yes the fastboot usb connection fails to show on the computer. Trying the mass storage now I'm getting E: Unable ot open ums lunfile.

CWM is outdated. Download this one: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.4.0-endeavoru.img
And flash like this:
"fastboot flash recovery filename.img"
Phone in fastboot mode of course.

And as far the fastboot usb connection, try to re-install HTC drivers and check that the device is recognized by the pc. Then put the phone in the bootloader again and try the command
Fastboot devices
Hopefully it brings back the serial
Or you may need to update the java sdk platform tools

TToivanen said:
CWM is outdated. Download this one: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.4.0-endeavoru.img
And flash like this:
"fastboot flash recovery filename.img"
Phone in fastboot mode of course.
Click to expand...
Click to collapse
Just tried and getting a failed message
C:\fastboot>fastboot flash recovery-clockwork-touch-5.8.4.0-endevoru.img
unknown partition 'recovery-clockwork-touch-5.8.4.0-endevoru.img'
error: cannot determine image filename for 'recovery-clockwork-touch-5.8.4.0-end
evoru.img'

Rename the recovery to just recovery.img and try again
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Fastboot devices gets the serial ?
And it sounds stupid......but....the file is actually in the fastboot folder

Mr Hofs said:
And as far the fastboot usb connection, try to re-install HTC drivers and check that the device is recognized by the pc. Then put the phone in the bootloader again and try the command
Fastboot devices
Hopefully it brings back the serial
Or you may need to update the java sdk platform tools
Click to expand...
Click to collapse
Tried fastboot devices and got a HT number which I hope is the serial number. Downloading the SDK tools again now.
Thank you for all the help you are giving me.

If the serial comes up you are good to go and flash ....did you try the idea i gave in my previous post ?

That Worked phone is up and running again.
Thanks for all your help you may have saved my life. The other half would have killed me if I suddenly went and got a new phone.

Nice ! Glad it worked

[Q] HELP HELP Upgrading hboot gone bad

Hi Everyone,
I was trying to install the vemon viper x 3.3.6 (Im kind of new to flashing rom onto phones) onto my htc one x and had to update my hboot from 0.98 to 1.31 which i did with JBW tool and worked perfect and i unlocked my bootloader again but wen i was finished unlocking my bootloader i accendently factory reset my phone so it removed the vemon viper x 3.3.6 zip folder off my phone and cant run my old rom which is the vemon viper x 2.7 as it isnt a jellybean rom. So when i start my phone it loads the rom but doesn't boot. All i can get into is my hboot. My htc one x is s-on as well. Please any help would be great.

Flash a recovery, mount usb storage, copy rom to phone and flash it.

TToivanen said:
Flash a recovery, mount usb storage, copy rom to phone and flash it.
Click to expand...
Click to collapse
I flashed clockworkmod recovery onto my phone but i cant get into my phone to use the usb storage option to copy the rom onto my phone.

enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !

Mr Hofs said:
enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !
Click to expand...
Click to collapse
I will giv it a go, thanks for your help

rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse

rwhelan said:
rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse

Mr Hofs said:
rwhelan said:
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse
It couldn't fastboot the boot.img file so decided to install it from recovery i see now that was a bit of a mistake. I will " fastboot erase cache" and fastboot the boot.img. Hope for the best
Click to expand...
Click to collapse

You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !

Mr Hofs said:
You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !
Click to expand...
Click to collapse
I have one last big problem, my phone is on a boot loop after trying to install my rom from recovery and the battery is too low so it wont allow me to flash anything onto my phone. What can i do???

can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up !

Mr Hofs said:
can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up ![/QUI
I cant get into the recovery. Is there anything i can do??
Click to expand...
Click to collapse

Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....

Mr Hofs said:
Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....
Click to expand...
Click to collapse
I am going to sound very stupid. Could you give me the exact line of command to use if the fastboot folder is saved in the local storage on the computer (c: drive), i dont want to do more damage then i have.:silly:

Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....

Mr Hofs said:
Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....
Click to expand...
Click to collapse
The file worked perfectly just opened it in the fastboot files and left it run all night. Then fastboot erase cache and the recovery is back up and running just have to flash the boot.img and phone up and running. Thanks for your help.

No problem. Glad its sorted !

Stuck at HTC Quitly brilliant

Hello all, today morning i transfer my music from PC to my phone and when it was 90% transfer stuck and phone was stuck too. So i tryed to reboot it. After i do it it stuck at HTC Quietly brilliant logo. I press power + volume down and tryed go to recovery and erase cache but when i press Recovery it show TWRP screen and stuck on it too. When i in fastboot and press HBOOT it show SD Card failed or something like that. So i think my SD card not mount when i turn on my phone, how to fix this guys ?? everything was fine until today. If you know anyway to get my SD Card mounted please tell i really need to fix this problem

Gezas said:
Hello all, today morning i transfer my music from PC to my phone and when it was 90% transfer stuck and phone was stuck too. So i tryed to reboot it. After i do it it stuck at HTC Quietly brilliant logo. I press power + volume down and tryed go to recovery and erase cache but when i press Recovery it show TWRP screen and stuck on it too. When i in fastboot and press HBOOT it show SD Card failed or something like that. So i think my SD card not mount when i turn on my phone, how to fix this guys ?? everything was fine until today. If you know anyway to get my SD Card mounted please tell i really need to fix this problem
Click to expand...
Click to collapse
That's strange man, how did you transfer it?

Try to use ADB to flash another recovery while in fastboot I believe its "adb flash recovery /folder/folder/recoveryfilename.zip" see if that works. If adb gives you a permission error type into BASH terminal (Ubuntu/Debian) or command prompt (win) "adb root". If that recovery works there should be an option somewhere to Mount the SD card. Make sure the recovery you flash is built for your device.
Nexus 4 CyanogenMod 10.1.0RC5

ryaniskira said:
Try to use ADB to flash another recovery while in fastboot I believe its "adb flash recovery /folder/folder/recoveryfilename.zip" see if that works. If adb gives you a permission error type into BASH terminal (Ubuntu/Debian) or command prompt (win) "adb root". If that recovery works there should be an option somewhere to Mount the SD card. Make sure the recovery you flash is built for your device.
Nexus 4 CyanogenMod 10.1.0RC5
Click to expand...
Click to collapse
it is
Code:
fastboot flash recovery recovery.img
but i don't think that this will solve his problem, i think that something messed up his partitions, probably he will need to run a RUU and see if that works

matt95 said:
it is
Code:
fastboot flash recovery recovery.img
but i don't think that this will solve his problem, i think that something messed up his partitions, probably he will need to run a RUU and see if that works
Click to expand...
Click to collapse
Hey maybe you could help me with that ?? If can write me message or add in skype simassimas99

Gezas said:
Hey maybe you could help me with that ?? If can write me message or add in skype simassimas99
Click to expand...
Click to collapse
by the way i have backups but i cant enter recovery. My phone CID is HTC__032 which RUU i need use ?? and if i cant acces my SD Card when phone connected to PC i still can install that RUU ??

Gezas said:
Hey maybe you could help me with that ?? If can write me message or add in skype simassimas99
Click to expand...
Click to collapse
Post the result of: fastboot getvar version-main
We Will then see whether your device has a ruu for it or not...
If you need help in flashing recovery.. Use the command posted by matt.. Don't forget to erase fastboot cache as well!
-Sent from my IceCold One X!

vin4yak said:
Post the result of: fastboot getvar version-main
We Will then see whether your device has a ruu for it or not...
If you need help in flashing recovery.. Use the command posted by matt.. Don't forget to erase fastboot cache as well!
-Sent from my IceCold One X!
Click to expand...
Click to collapse
My getvar version-main is 3.14.401.31
CID HTC__032
When i connect it by USB it show FASTBOOT USB when i use Hasoon tool and trying erase cache it says error: device not found. I close window next window pop up and says "erasing "cache" and in next line failed....

Gezas said:
My getvar version-main is 3.14.401.31
CID HTC__032
When i connect it by USB it show FASTBOOT USB when i use Hasoon tool and trying erase cache it says error: device not found. I close window next window pop up and says "erasing "cache" and in next line failed....
Click to expand...
Click to collapse
Here's the ruu for your device : http://bugsylawson.com/files/file/1...-r-radio-5120416229-release-302015-signedexe/
Download it. Lock your Bootloader : fastboot oem lock
Then run the ruu with admin privileges. It will take your phone back to full stock!
If your problem doesn't solve even now, it might be a hardware failure of some sort...
-Sent from my IceCold One X!

vin4yak said:
Here's the ruu for your device : http://bugsylawson.com/files/file/1...-r-radio-5120416229-release-302015-signedexe/
Download it. Lock your Bootloader : fastboot oem lock
Then run the ruu with admin privileges. It will take your phone back to full stock!
If your problem doesn't solve even now, it might be a hardware failure of some sort...
-Sent from my IceCold One X!
Click to expand...
Click to collapse
Ok will try. So if my Storage wont show at Computer it doesnt matter i just need go to bootloader use fastboot for lock and install RUU ?
Sorry for all these questions just need be fully sure
Btw i dont need flash boot.img or stock recovery ?? just install RUU ?

Gezas said:
Ok will try. So if my Storage wont show at Computer it doesnt matter i just need go to bootloader use fastboot for lock and install RUU ?
Sorry for all these questions just need be fully sure
Btw i dont need flash boot.img or stock recovery ?? just install RUU ?
Click to expand...
Click to collapse
Ok now my phone show ***Locked*** i tryed install RUU but i got problem like this
http://forum.xda-developers.com/showthread.php?t=2187491&page=2
It waiting for bootloader. When it restart bootloader it not restarting just stay off.

Gezas said:
Ok now my phone show ***Locked*** i tryed install RUU but i got problem like this
http://forum.xda-developers.com/showthread.php?t=2187491&page=2
It waiting for bootloader. When it restart bootloader it not restarting just stay off.
Click to expand...
Click to collapse
PLEASE any 1 help me. Im stuck in bootloader now when i turn on my phone it send me to bootloader. When i connect it to PC i dont see it. Maybe some one can help me via team wiever ?? And tell me maybe im bricked already ?? Or im not bricked till i can go to bootloader ?

Nobody have same problem and maybe know solution ?

Gezas said:
Nobody have same problem and maybe know solution ?
Click to expand...
Click to collapse
well if u are on a rooted device when ur device goes to bootloader...go to recovery and wipe davilik cache and fix permissions...if it isnt rooted...when ur device goes to bootloader try FACTORY RESET ...

recovery not work, factory reset too.

Gezas said:
recovery not work, factory reset too.
Click to expand...
Click to collapse
first flash the recovery in ur mobile if its bootloader is unlocked
Then you can do it with a nandroid backup !
http://forum.xda-developers.com/show....php?t=1975140
Go there and download the matching nandroid of your cid and main !
You need to flash the boot.img from the nandroid and unpack the nandroid to the phones sdcard then perform a full wipe and restore the nandroid.

It might need a JTAG.
Nexus 4 CyanogenMod 10.1.0RC5

ryaniskira said:
It might need a JTAG.
Nexus 4 CyanogenMod 10.1.0RC5
Click to expand...
Click to collapse
i am also thinking the same