Develop Bugs

ROM issue with my Epic 4G Touch, need help!

I just did a trade with someone and got his Epic 4G Touch. He mentioned the phone was rooted but I didn't catch what rom he had on there. The phone was working fine but had all of his information on it, so I did a factory reset so I can get all of my stuff on it. Once the phone rebooted, it shows the Samsung loadup screen with a yellow exclamation point at the bottom of the screen, then goes to a screen that says "Android" on it, then it seemingly turns off. I can't get the phone to load up at all, it just goes to that Android screen and goes black. Any ideas on how I can get this back up and running? Thanks in advance to anyone that can help.

Hold power and vol down, then hit vol up and you should be in odin mode. Just flash a new kernel and rom with that using odin. There are plenty of en in the development section. I like stock rooted deodexed rom with LoSt kernel
Sent from my Galaxy S2

Thanks for the response. I did that and it shows a screen that says "Downloading...Do not turn off target!!". I presume I have to flash the ROM from my home computer since I'm at work right now. Is that normal that you would have to reflash a rom after doing a factory reset? I did that on my Evo that was rooted and the ROM that was on the phone originally still loaded up like normal.
FYI: it has Zedomax v3 for the kernel. I think I will try out the stock setup you suggested once I get home.

in most cases u dont realy need to do wipe date( factory reset) but i dont think is the wipe data messed up ur phone. i could wrong tho when did a factor reset did u wiped the internal storage too? that might cause the problem
Sent from my SPH-D710 using xda premium

skykc0401 said:
in most cases u dont realy need to do wipe date( factory reset) but i dont think is the wipe data messed up ur phone. i could wrong tho when did a factor reset did u wiped the internal storage too? that might cause the problem
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
When you have a custom rom you never want to do a factory restore as it is not a factory rom ..... Use odin to flash a stock rom or download one and put it on micro sd and use cwm to install ... Vol up and power
Sent from my SPH-D710 using xda premium

Epix4G said:
When you have a custom rom you never want to do a factory restore as it is not a factory rom ..... Use odin to flash a stock rom or download one and put it on micro sd and use cwm to install ... Vol up and power
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I didn't realize it would do that. Is it necessary to have a microSD card to install a new ROM? Also, I am looking to have the stock software on this phone, but still keep it rooted to be able to use the hotspot. Would this be the correct link to downloading that? http://forum.xda-developers.com/showthread.php?t=1282415
Thanks for the help everyone. You guys are why XDA rules the roost!

Yes that is the rom for installing in cwm...., now about sd card go into cwm and mount internal and hook up to computer with usb .....the newer cwm versions can do this some of the first one could not .....if your computer then sees the phone put room on internal and flash if not then you will have to odin or use card
Sent from my SPH-D710 using xda premium

Epix4G said:
Yes that is the rom for installing in cwm...., now about sd card go into cwm and mount internal and hook up to computer with usb .....the newer cwm versions can do this some of the first one could not .....if your computer then sees the phone put room on internal and flash if not then you will have to odin or use card
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Makes sense. I will give this a shot when I get home in an hour and report back.

Looks like it didn't work. I attempted to install via Odin and here is the log:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> factoryfs.img
<ID:0/007> NAND Write Start!!
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Removed!!
<ID:0/008> Added!!
It looks like everything worked properly, but when I rebooted the phone it still does the same thing as before. Did I miss something?
***UPDATE***
I tried downloading the completely stock EG-30 Tar and installed it via Odin. Now I see the Sprint boot screen but it just keeps looping over and over. Im going to try to reinstall again and see what it does....

OK you need ah stock rom and will unroot so you can start from the beginning. It happens to me all the time.

latoso said:
OK you need ah stock rom and will unroot so you can start from the beginning. It happens to me all the time.
Click to expand...
Click to collapse
I thought that is what I just installed? I installed the package from this thread: http://forum.xda-developers.com/showthread.php?t=1282420

I would definitely go back to full stock and then start fresh from there. If you run into other issues just ask. That's what we are here for.

I thought what I downloaded off that page was full stock? Can you provide a link to what I should be installing?

What file did u odin ?
Use this one
http://forum.xda-developers.com/showthread.php?t=1282420
it works I have done it ...
Sent from my SPH-D710 using xda premium

So far I have tried Stock-EG30 and Deodexed-Rooted-Busybox-EG30.

Ten Ounce said:
So far I have tried Stock-EG30 and Deodexed-Rooted-Busybox-EG30.
Click to expand...
Click to collapse
The deodexed is cwm zip .....was the first one a kernel only ?
Sent from my SPH-D710 using xda premium

I'm not entirely sure. He doesn't remember what ROM he had, only the kernel (Zedomax v3) that he had installed. I tried doing the deodexed package first and nothing happened. When I went to the stock package it changed the boot screen to the Sprint version but just loops endlessly. Had I not done the factory reset I would've had more details but I haven't been able to load up anything since then.

Ten Ounce said:
I'm not entirely sure. He doesn't remember what ROM he had, only the kernel (Zedomax v3) that he had installed. I tried doing the deodexed package first and nothing happened. When I went to the stock package it changed the boot screen to the Sprint version but just loops endlessly.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1282420
Odin this one it goes back to complete stock then u, can root but this will get phone working now
Sent from my SPH-D710 using xda premium

Epix4G said:
http://forum.xda-developers.com/showthread.php?t=1282420
Odin this one it goes back to complete stock then u, can root but this will get phone working now
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Thats the one I just did that has me in the endless boot loop.

Ten Ounce said:
Thats the one I just did that has me in the endless boot loop.
Click to expand...
Click to collapse
You did it in pda with nothing checked but reboot in odin ? If so try again
Sent from my SPH-D710 using xda premium

Soft bricked phone - could use some help!

Hi guys. I recently tried rooting my phone and messed it up pretty bad. I didn't realize the root method was for ICS and not the recently deployed JB update until after I did it. Here's what's going on:
- Can't boot into android. The screen just goes black after the first Samsung logo fades. I do get an AT&T sound afterwards, but it's very distorted.
- I can boot into CWM (which was included with the root?) just fine by holding vol + pwr + home.
Now I've tried a million things from googling around, but I can't seem to find any way to flash my phone (or recover it) back to stock. I know I may get some people saying "an easy google search would show you", but I'm at a complete loss at the moment. Everything seems to be for ODIN + download mode which I can't get to since CWM is installed.
Is there any way I can flash my phone back to stock? Step by step instructions would be great (and where to download firmware).
Thank you!

grazed said:
Hi guys. I recently tried rooting my phone and messed it up pretty bad. I didn't realize the root method was for ICS and not the recently deployed JB update until after I did it. Here's what's going on:
- Can't boot into android. The screen just goes black after the first Samsung logo fades. I do get an AT&T sound afterwards, but it's very distorted.
- I can boot into CWM (which was included with the root?) just fine by holding vol + pwr + home.
Now I've tried a million things from googling around, but I can't seem to find any way to flash my phone (or recover it) back to stock. I know I may get some people saying "an easy google search would show you", but I'm at a complete loss at the moment. Everything seems to be for ODIN + download mode which I can't get to since CWM is installed.
Is there any way I can flash my phone back to stock? Step by step instructions would be great (and where to download firmware).
Thank you!
Click to expand...
Click to collapse
Download mode and recovery are different. Cwm is recovery, if you can get to recovery, use adb to push a ROM over. If you go to download mode, use Odin to load a tar few package. What phone are you using? D2att or international?
Edit: Nvm the phone type. Use vol- and home combination to get download mode. Vol+ and home for recovery. Go to the stickied thread on how to root and load ROMs. It has an index of TW and AOSP ROMs. All of them prerooted.
http://forum.xda-developers.com/showthread.php?p=27745443.
Sent from my SGH-I747 using xda premium

gunz.jones said:
U
Download mode and recovery are different. Cwm is recovery, if you can get to recovery, use adb to push a ROM over. If you go to download mode, use Odin to load a tar few package. What phone are you using? D2att or international?
Edit: Nvm the phone type. Use vol- and home combination to get download mode. Vol+ and home for recovery.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
How would I go about using adb (I'm apparently clueless)?
I just tried download mode and it worked. How would I use Odin to flash it? I have the stock firmware image (and CM10 which is what I wanted to eventually flash) already downloaded, but I think you need Odin specific zips, right?
EDIT: I just browsed the phone's internal SD and everything is still there, is there a way to just undo what I did in the first place? Or if anything, I still need to backup my IMEI and such from what I've read... I think.

grazed said:
How would I go about using adb (I'm apparently clueless)?
I just tried download mode and it worked. How would I use Odin to flash it? I have the stock firmware image (and CM10 which is what I wanted to eventually flash) already downloaded, but I think you need Odin specific zips, right?
Click to expand...
Click to collapse
Odin uses tars. Different compression type. If you hook the USB up to the phone while in recovery, it should load adb mode drivers on the comp. Did you have a ROM already on internal? If so, just factory reset, wipe system, load ROM and gapps.
Sent from my SGH-I747 using xda premium

gunz.jones said:
Odin uses tars. Different compression type. If you hook the USB up to the phone while in recovery, it should load adb mode drivers on the comp. Did you have a ROM already on internal? If so, just factory reset, wipe system, load ROM and gapps.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Well, I was just going to root the phone first so I could use Titanium before flashing, so I never ended up putting the ROM on the internal SD.
When I connect the phone when CWM is up, drivers attempt to install but fail.

There are threads literally for every question you have asked I would suggest reading them before ever flashing anything on your phone
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

aaroncal said:
There are threads literally for every question you have asked I would suggest reading them before ever flashing anything on your phone
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Trust me, I have read them. I saw the thread on flashing the international GSM image, but I don't get how I would get back to stock after doing that.
Honestly, I wish I hadn't done it and made a thread before I did anything, but it seems as if curiosity and laziness got me.

grazed said:
Trust me, I have read them. I saw the thread on flashing the internation GSM image, but I don't get how I would get back to stock after doing that.
Honestly, I wish I hadn't done it and made a thread before I did anything, but it seems as if curiosity and laziness got me.
Click to expand...
Click to collapse
Get a tar of the stock ICS firmware. Follow the directions while in download mode to flash. TiBU is useless to freeze anything if you're going to load a ROM anyway. Don't be lazy and just reload apps manually. You should always have a backup plan.
For sh*ts and giggles, go into cwm and just factory reset.
Since adb drivers arent loading for you, I'm not going through that process with you. For future though, you will want adb knowledge. Look it up.
Sent from my SGH-I747 using xda premium

gunz.jones said:
Get a tar of the stock ICS firmware. Follow the directions while in download mode to flash. TiBU is useless to freeze anything if you're going to load a ROM anyway. Don't be lazy and just reload apps manually. You should always have a backup plan.
For sh*ts and giggles, go into cwm and just factory reset.
Since adb drivers arent loading for you, I'm not going through that process with you. For future though, you will want adb knowledge. Look it up.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I used this thread to flash back to stock AT&T ICS:
http://forum.xda-developers.com/showthread.php?t=1727443
Didn't work. It still boots into a black screen with a blue LED after the Samsung logo fades. Factory reset also went through, but nothing worked. It just booted into a blank screen again, but with the AT&T sound afterwards.
Sorry for being an idiot, I'm getting kinda desperate here, and I totally realize that this was a bad call on my part without more research.

grazed said:
I used this thread to flash back to stock AT&T ICS:
http://forum.xda-developers.com/showthread.php?t=1727443
Didn't work. It still boots into a black screen with a blue LED after the Samsung logo fades. Factory reset also went through, but nothing worked. It just booted into a blank screen again, but with the AT&T sound afterwards.
Sorry for being an idiot, I'm getting kinda desperate here, and I totally realize that this was a bad call on my part without more research.
Click to expand...
Click to collapse
Did Odin show a pass on flash?
Sent from my SGH-I747 using xda premium

gunz.jones said:
Did Odin show a pass on flash?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
This is what it showed:
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!

Sounds like problems Motorola gave grief with on the droids and their flashing tool. I'm looking for a jb tar file. When you used cwm and used Odin, both of them should have removed any times that would cause and issue. Especially since odin of stock fw would be like ghosting an image. Try using the toolkit to lock everything up and go back to stock completely.
Samsung stock image for jb : http://samsung-updates.com/device/?id=SGH-I747
Sent from my SGH-I747 using xda premium

gunz.jones said:
Sounds like problems Motorola gave grief with on the droids and their flashing tool. I'm looking for a jb tar file. When you used cwm and used Odin, both of them should have removed any times that would cause and issue. Especially since odin of stock fw would be like ghosting an image. Try using the toolkit to lock everything up and go back to stock completely.
Samsung stock image for jb : http://samsung-updates.com/device/?id=SGH-I747
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Unfortunately can't use anything in the toolkit since it's needing me to be booted into the OS first with debugging on (I'm stuck with download mode or CWM).

grazed said:
Unfortunately can't use anything in the toolkit since it's needing me to be booted into the OS first with debugging on (I'm stuck with download mode or CWM).
Click to expand...
Click to collapse
Tried using the jb stock image?
http://developer.android.com/tools/help/adb.html for adb use and information. To get the drivers to work, try loading the naked drivers pack. It includes Samsung drivers. Remove all Samsung installed crap from your comp and reboot. Manually install drivers by forcing legacy devices or by telling the computer you have the disk if needed after hooking phone back up.
Sent from my SGH-I747 using xda premium

gunz.jones said:
Tried using the jb stock image?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Couldn't find it, but I'm in the middle of downloading this to see if it works:
http://forum.xda-developers.com/showthread.php?t=1739426

Holy crap it worked! Thank you for all of your help.

grazed said:
Holy crap it worked! Thank you for all of your help.
Click to expand...
Click to collapse
Good deal.
Sent from my SGH-I747 using xda premium

Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

[Q] My rooted Note 2 (GT-N7100) bricked yesterday, now it just bootloop. Help please?

So I got my Note 2 a week or so before Christmas and rooted it within a couple of days. All has been fine until recently, where it's been crashing a lot, and yesterday it died. Now it just boot loops permanently and can't be stopped without removing the battery.
I have tried flashing to stock via Odin as per this tutorial but every time I try to do it, it fails. Output:
Code:
><ID:0/003> Added!!
><OSM> Enter CS for MD5..
><OSM> Check MD5.. Do not unplug the cable..
><OSM> Please wait..
><OSM> N7100XXDLL4_N7100H3GDLL2_N7100NEDLK1_HOME.tar.md5 is valid.
><OSM> Checking MD5 finished Sucessfully..
><OSM> Leave CS..
><ID:0/003> Odin v.3 engine (ID:3)..
><ID:0/003> File analysis..
><ID:0/003> SetupConnection..
><ID:0/003> Initialzation..
><ID:0/003> Get PIT for mapping..
><ID:0/003> Firmware update start..
><ID:0/003> system.img
><ID:0/003> NAND Write Start!!
><ID:0/003> boot.img
><ID:0/003> cache.img
><ID:0/003> hidden.img
><ID:0/003> recovery.img
><ID:0/003> modem.bin
><ID:0/003>
><ID:0/003> Complete(Write) operation failed.
><ID:0/003> Added!!
><OSM> All threads completed. (succeed 0 / failed 1)
From what I've read I'm a victim of Sudden Death Syndrome, which is a problem with Samsung firmwares at Android 4.1.1 and is fixed by updating. Obviously, since I had rooted, I couldn't update the phone and as I wasn't aware of SDS I didn't update away from it myself. Now my phone is bricked and I'm at a loss for what to do.
I live in the UK and my carrier is 3, if it helps. As I said it is rooted and the Custom Binary Download is at Yes (1 counts) so I can't just send it back to 3 and have it replaced. I'm fine with flashing another ROM (I've been planning on trying Paranoid Android) but I don't have a bootloader installed.
Thanks for any help in advance.

Have you tried to flash another stock rom?
Can you get into download mode ?
Sent from my GT-N7100 using xda premium

indie said:
Have you tried to flash another stock rom?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Yes, that's what I was trying to flash with Odin.

try to install CWM and install a rom again, maybe that will help you.
Helped me if had Endless Bootloop

Crimvel said:
try to install CWM and install a rom again, maybe that will help you.
Click to expand...
Click to collapse
How do I install Clockwork Mod with Odin?

Gamoc said:
How do I install Clockwork Mod with Odin?
Click to expand...
Click to collapse
I followed the guide on CM
http://wiki.cyanogenmod.org/w/Install_CM_for_n7100

Crimvel said:
I followed the guide on CM
Click to expand...
Click to collapse
After spending 90 minutes getting this to work (involving failed installations of VCRedis, uninstalling all the ones I had, installing the one specifically linked in the guide that still didn't work, going for an older version of Heimdall which, eventually, flashed and said it completed) the phone is still in a bootloop every time I turn it on and I can't boot into recovery with Power button + Volume up + home.
This is really beginning to frustrate me.

Gamoc said:
After spending 90 minutes getting this to work (involving failed installations of VCRedis, uninstalling all the ones I had, installing the one specifically linked in the guide that still didn't work, going for an older version of Heimdall which, eventually, flashed and said it completed) the phone is still in a bootloop every time I turn it on and I can't boot into recovery with Power button + Volume up + home.
This is really beginning to frustrate me.
Click to expand...
Click to collapse
Hmm sorry to hear this seems it is bubar (bricked up beyond all recognition)

Crimvel said:
Hmm sorry to hear this seems it is bubar (bricked up beyond all recognition)
Click to expand...
Click to collapse
Do you have any idea why this would have happened? As I said, all I did was root it months ago and it just died of its own accord. I was under the impression that SDS was recoverable.

Gamoc said:
After spending 90 minutes getting this to work (involving failed installations of VCRedis, uninstalling all the ones I had, installing the one specifically linked in the guide that still didn't work, going for an older version of Heimdall which, eventually, flashed and said it completed) the phone is still in a bootloop every time I turn it on and I can't boot into recovery with Power button + Volume up + home.
This is really beginning to frustrate me.
Click to expand...
Click to collapse
few days ago.....i went into bootloop with just flashing a wrong framework.res apk which i modded for some tweaks but anyways its not a big prob. just flash cwm or twrp on ur device.....u have to be very paticular about pressing the keys.....remove battery once its completely off, place the battery again, charge it well and then press 3keys(vol.up,power,home) together wait untill u get to see samsung logo....release all keys once u got the logo on ur screen.....and once u r in recovery flash any rom of ur choice....also flash a good updated firmware of ur choice...hope this helps
Sent from my GT-N7100 using xda premium

AbhimanyuAryan said:
few days ago.....i went into bootloop with just flashing a wrong framework.res apk which i modded for some tweaks but anyways its not a big prob. just flash cwm or twrp on ur device.....u have to be very paticular about pressing the keys.....remove battery once its completely off, place the battery again, charge it well and then press 3keys(vol.up,power,home) together wait untill u get to see samsung logo....release all keys once u got the logo on ur screen.....and once u r in recovery flash any rom of ur choice....also flash a good updated firmware of ur choice...hope this helps
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I've already tried flashing CWM and it just won't work. I tried to go look up TWRP but their site is having an SQL database error so I can't get it to try. Is there any chance at all of it working if Clockwork Mod won't work?
I don't see a Samsung logo, I see the Note 2 splash then it reboots and shows me again...ad nauseum.

Gamoc said:
I've already tried flashing CWM and it just won't work. I tried to go look up TWRP but their site is having an SQL database error so I can't get it to try. Is there any chance at all of it working if Clockwork Mod won't work?
I don't see a Samsung logo, I see the Note 2 splash then it reboots and shows me again...ad nauseum.
Click to expand...
Click to collapse
well i never faced such prob. i used my note2 for 2mnths and then rooted it.....after verifying everything.....what else i can say plz try twrp....if it works well n good if not.....tell me....then i'll see what else i can do for u
Sent from my GT-N7100 using xda premium

AbhimanyuAryan said:
well i never faced such prob. i used my note2 for 2mnths and then rooted it.....after verifying everything.....what else i can say plz try twrp....if it works well n good if not.....tell me....then i'll see what else i can do for u
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Oh I will definitely try it as soon as its site doesn't say "Cannot connect to the MySQL Database Server" at me.

Gamoc said:
Oh I will definitely try it as soon as its site doesn't say "Cannot connect to the MySQL Database Server" at me.
Click to expand...
Click to collapse
if site is down for some reasons.....u can get it from someone else.....i am sure everyone here on xda have few roms and these 2 recoveries for their devices......
Sent from my GT-N7100 using xda premium

@Gamoc
Don't waste your time with CWM or TWRP or any other custom roms
Just flash a stock firmware. After restart, hold Volume UP + Home + Power buttons until you get into recovery mode, then release them.
If you cannot get into recovery mode, most likely you have internal storage error.
Probably partitions (or mbr) are corrupted. There is nothing you can do.
If you get into recovery, do a factory reset.

[Q] Phone boots but is unusable

So last night I upgraded to 4.3 from stock 4.1.2 through OTA. The phone boots, but I get the message "Unfortunately, S Suggest has stopped" and when I close that dialog, it pops up again almost instantly. If I am sneaky, I can get past the lock-screen, but that is it. It also spontaneously restarts.
Getting past the lockscreen reveals that not only is S Suggest continually crashing, but many other programs are as well. I didn't want to try anything to fix this without first getting some advice for fear I'd make it worse.
When I had 4.0.4, this phone was rooted. I lost root through the 4.1.2 update. CPU tuner continued to work after the 4.1 update, so I never bothered to re-root. Could this be causing an issue with 4.3?

Have you tried using Odin to reflash the stock ROM to fix the issue?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

Bruce Lee said:
Have you tried using Odin to reflash the stock ROM to fix the issue?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
DO NOT DO THIS... Unless you want a brick. Once you are on 4.3 bootloaders you're stuck there. Any attempt to Odin will result in a hard brick (which can be recovered via SD card now)
You can flash any rom you want to via custom recovery as long as it doesn't modify the bootloader it is OK. But do not even think about using Odin.
Odin is now a Nasty 4 letter word. ODIN=HARDBRICK
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
DO NOT DO THIS... Unless you want a brick. Once you are on 4.3 bootloaders you're stuck there. Any attempt to Odin will result in a hard brick (which can be recovered via SD card now)
You can flash any rom you want to via custom recovery as long as it doesn't modify the bootloader it is OK. But do not even think about using Odin.
Odin is now a Nasty 4 letter word. ODIN=HARDBRICK
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
First off, thank you for the reply.
I have only ever flashed roms via Odin and honestly have no idea what custom recovery means. Is that something I should have set up beforehand? If this is fixable, could you point me to some info on how to do this?
I was hoping that the solution would be as simple as a factory reset, but I guess this is not the case?

anonymous78 said:
First off, thank you for the reply.
I have only ever flashed roms via Odin and honestly have no idea what custom recovery means. Is that something I should have set up beforehand? If this is fixable, could you point me to some info on how to do this?
I was hoping that the solution would be as simple as a factory reset, but I guess this is not the case?
Click to expand...
Click to collapse
Yes a factory reset should do the trick. Don't flash anything just boot into recovery and factory reset. Sometimes these problems occur after firmware updates especially if you were rooted previously.
Sent from my SGH-I747M using Tapatalk

If you're still having issues after a factory reset do a search for how to install custom recovery (TWRP or CWM) I personally prefer TWRP some prefer CWM. So you can flash a rom only without a bootloader. I can link you to the rom I am running now if you need me to. It is very stable and I can't find anything wrong with it as of right now.
But be warned if you are under warranty you will void your warranty by doing so and no amount of using triangle away will keep Samsung from knowing that you voided your warranty.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Florad77 said:
Yes a factory reset should do the trick. Don't flash anything just boot into recovery and factory reset. Sometimes these problems occur after firmware updates especially if you were rooted previously.
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
Ok, I tried a factory reset. It boots to the welcome screen but it is unresponsive and restarts after ~20 seconds. When it restarts it gets stuck on the boot animation. The factory reset is the only thing I have done to the phone since these issues began, is there something else I should have done?

theramsey3 said:
If you're still having issues after a factory reset do a search for how to install custom recovery (TWRP or CWM) I personally prefer TWRP some prefer CWM. So you can flash a rom only without a bootloader. I can link you to the rom I am running now if you need me to. It is very stable and I can't find anything wrong with it as of right now.
But be warned if you are under warranty you will void your warranty by doing so and no amount of using triangle away will keep Samsung from knowing that you voided your warranty.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I would appreciate any recommendations you have for a rom if you are sure it will work after trying to install 4.3
I'm starting to get very anxious.

anonymous78 said:
Ok, I tried a factory reset. It boots to the welcome screen but it is unresponsive and restarts after ~20 seconds. When it restarts it gets stuck on the boot animation. The factory reset is the only thing I have done to the phone since these issues began, is there something else I should have done?
Click to expand...
Click to collapse
Is your phone under warranty? If so send it in to be fixed. If your phone isn't under warranty or you simply don't care about your warranty please click Show contents below
Go here to install recovery and Go here for all the goodies you might want to flash I used this Rom by Loserskater on my phone

theramsey3 said:
Is your phone under warranty? If so send it in to be fixed. If your phone isn't under warranty or you simply don't care about your warranty please click Show contents below
Go here to install recovery and Go here for all the goodies you might want to flash I used this Rom by Loserskater on my phone
Click to expand...
Click to collapse
Not entirely sure I understand the process here.
-I need to flash TWRP through Odin, though I thought you said to absolutely not use Odin?
-Then I flash SuperSU and KnoxRemover somehow?
-But then I have to access the play store? Will I even be able to do this? Or is this part optional for what I want?
-I have no idea what I'm suppose to do with the second link. Do I have to flash a bootloader, kernel, radio, and rom separately?
I feel like an idiot for not understanding this.

anonymous78 said:
Not entirely sure I understand the process here.
-I need to flash TWRP through Odin, though I thought you said to absolutely not use Odin?
-Then I flash SuperSU and KnoxRemover somehow?
-But then I have to access the play store? Will I even be able to do this? Or is this part optional for what I want?
-I have no idea what I'm suppose to do with the second link. Do I have to flash a bootloader, kernel, radio, and rom separately?
I feel like an idiot for not understanding this.
Click to expand...
Click to collapse
Ok on that note I do need to elaborate, Odin is only bad if you are trying to flash back to something prior to 4.3 because all the odin .tar.md5 files contain a boot loader, and the bootloader is the killer of these phones after the 4.3 upgrade.
* flash TWRP with Odin (that is safe)
* Dont worry with the SuperSU and KnoxRemover at this point right now Unless you want root access(but wait till after you get the ROM to boot again.)
* You will then need the ROM flash it in TWRP, wipe the dalvik and cache, then reboot the system
If you have any further Questions feel free to ask

theramsey3 said:
DO NOT DO THIS... Unless you want a brick. Once you are on 4.3 bootloaders you're stuck there. Any attempt to Odin will result in a hard brick (which can be recovered via SD card now)
You can flash any rom you want to via custom recovery as long as it doesn't modify the bootloader it is OK. But do not even think about using Odin.
Odin is now a Nasty 4 letter word. ODIN=HARDBRICK
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Sorry for the scare all. I apologize. I guess you learn something new everyday. I must be out the loop then.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

theramsey3 said:
Ok on that note I do need to elaborate, Odin is only bad if you are trying to flash back to something prior to 4.3 because all the odin .tar.md5 files contain a boot loader, and the bootloader is the killer of these phones after the 4.3 upgrade.
* flash TWRP with Odin (that is safe)
* Dont worry with the SuperSU and KnoxRemover at this point right now Unless you want root access(but wait till after you get the ROM to boot again.)
* You will then need the ROM flash it in TWRP, wipe the dalvik and cache, then reboot the system
If you have any further Questions feel free to ask
Click to expand...
Click to collapse
I don't think TWRP is flashing correctly. This is suppose to replace the default android recovery that I access by holding Vol up+menu at boot right?
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
//It restarts here, boots to setup, crashes as usual, hangs on a second restart. ~1 minute later Odin says it passes
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Removed!!
As far as I can tell, nothing has changed

anonymous78 said:
I don't think TWRP is flashing correctly. This is suppose to replace the default android recovery that I access by holding Vol up+menu at boot right?
As far as I can tell, nothing has changed
Click to expand...
Click to collapse
So when you try to boot into recovery it still takes you to the stock recovery?
not to try to make anyone feel retarded, but yes to get to recovery press vol up, home key and then power button for 4 seconds(how long it takes on my phone then I release the power button wait 2 seconds) and release all buttons

theramsey3 said:
So when you try to boot into recovery it still takes you to the stock recovery?
not to try to make anyone feel retarded, but yes to get to recovery press vol up, home key and then power button for 4 seconds(how long it takes on my phone then I release the power button wait 2 seconds) and release all buttons
Click to expand...
Click to collapse
Yep, that send me to stock recovery.

anonymous78 said:
Yep, that send me to stock recovery.
Click to expand...
Click to collapse
Try to get CWM on it. I found a link here but it is a huge file 118MB. http://forum.xda-developers.com/showthread.php?t=1703488
Are you using odin 3.09 now? or still using the 3.07?

theramsey3 said:
Try to get CWM on it. I found a link here but it is a huge file 118MB. http://forum.xda-developers.com/showthread.php?t=1703488
Are you using odin 3.09 now? or still using the 3.07?
Click to expand...
Click to collapse
Ok so I was using 3.07, I tried 3.09 with CWM and TWRP and had the same results as before. Using the toolkit (which doesn't officially support 4.3--not sure if that's important) I get the message "waiting for USB debugging to be enabled", and of course I can't enable this.

anonymous78 said:
Ok so I was using 3.07, I tried 3.09 with CWM and TWRP and had the same results as before. Using the toolkit (which doesn't officially support 4.3--not sure if that's important) I get the message "waiting for USB debugging to be enabled", and of course I can't enable this.
Click to expand...
Click to collapse
I'm going to have to sit back and wait for someone else to chime in on this one?
Maybe you can try to flash the Odin .Tar again and see if maybe it will boot. I read somewhere tonight that some people are having to flash some things more than one time to get them to work right.
It probably took my phone 5 minutes to boot after I recovered it. I really thought I hadn't fixed it then it just booted. So it might just take longer than you expect?
I will try to help if I can think of anything thing else to try but as of now I am out of ideas.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
I'm going to have to sit back and wait for someone else to chime in on this one?
Maybe you can try to flash the Odin .Tar again and see if maybe it will boot. I read somewhere tonight that some people are having to flash some things more than one time to get them to work right.
It probably took my phone 5 minutes to boot after I recovered it. I really thought I hadn't fixed it then it just booted. So it might just take longer than you expect?
I will try to help if I can think of anything thing else to try but as of now I am out of ideas.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Is there no way to use stock recovery to flash a stock 4.3 rom?

anonymous78 said:
Is there no way to use stock recovery to flash a stock 4.3 rom?
Click to expand...
Click to collapse
Not on AT&T there isn't. You can flash a stock firmware with odin if you have an I747M, Do Not Try this with an AT&T phone after going to 4.3 bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Partially Encrypted phone, no longer booting

Hello everyone,
I have an issue and I'm hoping that someone could maybe point me to the right direction: I was encrypting my S3 (i747M, running stock 4.4.2) with the options that are available through the Security menu in Touchwiz, and one of the requirements was that the phone be plugged through the encryption process as it needed a minimum of 80% battery. While I started the process, my phone was plugged and it was going on for about 2 minutes, when it fell from my table and got unplugged.. The back of the phone opened and when I restarted it, it never went past the part where before booting, it asks for a password before proceeding.
So, now the phone doesn't boot anymore.. I guess it's worth mentioning that I do have access to both download and recovery mode.
What I have tried to do so far has been:
Cleaning cache and dalvik and wiping the phone: nothing
Trying to flash the stock 4.4.2 ROM via Odin: nothing
Tried flashing another ROM via Philz, such as CM or Carbon: still nada..
If anyone could weight in and maybe provide any assitance or point me to the right direction, it would be tremendous help!
Thank you!

Did you format Dalvik, cache, data, and system before trying to flash a custom ROM?

audit13 said:
Did you format Dalvik, cache, data, and system before trying to flash a custom ROM?
Click to expand...
Click to collapse
Yup, I did. I did wipe system with the philz function to wipe before flashing a new ROM, but incidentally neither Carbon or CM have flashed properly.. I get a little android laying down with a red triangle.. I hadn't realize that before.
Sent from my SGH-T889V using XDA Premium 4 mobile app

I don't use Philz as I prefer to do each step using Touch CWM. Not sure what to suggest. Hopefully, someone with encryption experience will respond to your post.

Did you try flashing in Odin with re-partition checked?
Sent from my SAMSUNG-SGH-I747 using Tapatalk

DocHoliday77 said:
Did you try flashing in Odin with re-partition checked?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Nope, I hadn't try that but thank you, I definitely will give it a try and report back.
EDIT:
It didn't work.. I get this error message:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
I flashed after the stock md5 through Odin without the re-partion thingy checked and it flashed, but I get back to the booting part where I'm asked for the password to decrypt the phone, and it just reboots after that..
Anything else I could possibly do?

Try flashing like before with re-partition checked, but this time also click the PIT button and use this file.
https://www.androidfilehost.com/?fid=23060877489996938
Might not work, but could be worth a shot if the encryption is interfering with the internal pit on your device. If so, perhaps using one like this will work....?
Beyond that I'm just not sure. But if I think of anything I'll let you know.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

DocHoliday77 said:
Try flashing like before with re-partition checked, but this time also click the PIT button and use this file.
https://www.androidfilehost.com/?fid=23060877489996938
Might not work, but could be worth a shot if the encryption is interfering with the internal pit on your device. If so, perhaps using one like this will work....?
Beyond that I'm just not sure. But if I think of anything I'll let you know.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Thank you! I will try to flash it again with the PIT file you've shared and report back

DocHoliday77 said:
Try flashing like before with re-partition checked, but this time also click the PIT button and use this file.
https://www.androidfilehost.com/?fid=23060877489996938
Might not work, but could be worth a shot if the encryption is interfering with the internal pit on your device. If so, perhaps using one like this will work....?
Beyond that I'm just not sure. But if I think of anything I'll let you know.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
That you for the pit, and sorry I got back to report so late. I flashed the pit but I think since it wasn't an i747m pit it didn't work properly.. The phone no longer booted so I followed a "debricking" guideline I found on another post and now I can access download mode at least. Other than maybe trying with a, 747m pit what do u think my choices are? Just to JTAG it?
Thank you
Sent from my SGH-I717M using XDA Premium 4 mobile app

I suggest getting into download mode and trying to flash a full i747m ROM again in Odin.

wavv.drama said:
That you for the pit, and sorry I got back to report so late. I flashed the pit but I think since it wasn't an i747m pit it didn't work properly.. The phone no longer booted so I followed a "debricking" guideline I found on another post and now I can access download mode at least. Other than maybe trying with a, 747m pit what do u think my choices are? Just to JTAG it?
Thank you
Sent from my SGH-I717M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh man! I'm really sorry about that! I must have been thinking it was the I747....
Do as audit13 suggested though. Flash your stock 4.4.2 firmware via Odin and it should get it working again.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Thank you again. I'll try flashing the stock version again and I will report back. Should I try it without the PIT?

I would. I don't see it making anything worse to try it. If you can get a pit from another I747m, you could try it with that one. Obviously, don't use the one I gave you again!
If you know someone with the same model, I can help you get a pit from that device if you can't find one somewhere around here.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Sorry for the so late reply, but I had to travel for work and wasn't coming here. As a matter of fact I do have a second S3, and i747M also that I could retrieve the PIT from. Could you guide as to how I can do that please? Thank you!

audit13 said:
I suggest getting into download mode and trying to flash a full i747m ROM again in Odin.
Click to expand...
Click to collapse
Thank you for the suggestion. I was able to resolve it in the end I had done that before, but I was unable to get past the samsung logo, because I was missing the correct .PIT i believe. What I ended up doing was flashing stock firmware downloaded from sammobile via Odin and, using the stock recovery, I wiped data / factory reset and it worked! For some reason it didn't and hadn't work with a custom recovery, although I was doing the same process.
Thank you for everyone who helped with this!