Soft bricked phone - could use some help! - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Hi guys. I recently tried rooting my phone and messed it up pretty bad. I didn't realize the root method was for ICS and not the recently deployed JB update until after I did it. Here's what's going on:
- Can't boot into android. The screen just goes black after the first Samsung logo fades. I do get an AT&T sound afterwards, but it's very distorted.
- I can boot into CWM (which was included with the root?) just fine by holding vol + pwr + home.
Now I've tried a million things from googling around, but I can't seem to find any way to flash my phone (or recover it) back to stock. I know I may get some people saying "an easy google search would show you", but I'm at a complete loss at the moment. Everything seems to be for ODIN + download mode which I can't get to since CWM is installed.
Is there any way I can flash my phone back to stock? Step by step instructions would be great (and where to download firmware).
Thank you!

grazed said:
Hi guys. I recently tried rooting my phone and messed it up pretty bad. I didn't realize the root method was for ICS and not the recently deployed JB update until after I did it. Here's what's going on:
- Can't boot into android. The screen just goes black after the first Samsung logo fades. I do get an AT&T sound afterwards, but it's very distorted.
- I can boot into CWM (which was included with the root?) just fine by holding vol + pwr + home.
Now I've tried a million things from googling around, but I can't seem to find any way to flash my phone (or recover it) back to stock. I know I may get some people saying "an easy google search would show you", but I'm at a complete loss at the moment. Everything seems to be for ODIN + download mode which I can't get to since CWM is installed.
Is there any way I can flash my phone back to stock? Step by step instructions would be great (and where to download firmware).
Thank you!
Click to expand...
Click to collapse
Download mode and recovery are different. Cwm is recovery, if you can get to recovery, use adb to push a ROM over. If you go to download mode, use Odin to load a tar few package. What phone are you using? D2att or international?
Edit: Nvm the phone type. Use vol- and home combination to get download mode. Vol+ and home for recovery. Go to the stickied thread on how to root and load ROMs. It has an index of TW and AOSP ROMs. All of them prerooted.
http://forum.xda-developers.com/showthread.php?p=27745443.
Sent from my SGH-I747 using xda premium

gunz.jones said:
U
Download mode and recovery are different. Cwm is recovery, if you can get to recovery, use adb to push a ROM over. If you go to download mode, use Odin to load a tar few package. What phone are you using? D2att or international?
Edit: Nvm the phone type. Use vol- and home combination to get download mode. Vol+ and home for recovery.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
How would I go about using adb (I'm apparently clueless)?
I just tried download mode and it worked. How would I use Odin to flash it? I have the stock firmware image (and CM10 which is what I wanted to eventually flash) already downloaded, but I think you need Odin specific zips, right?
EDIT: I just browsed the phone's internal SD and everything is still there, is there a way to just undo what I did in the first place? Or if anything, I still need to backup my IMEI and such from what I've read... I think.

grazed said:
How would I go about using adb (I'm apparently clueless)?
I just tried download mode and it worked. How would I use Odin to flash it? I have the stock firmware image (and CM10 which is what I wanted to eventually flash) already downloaded, but I think you need Odin specific zips, right?
Click to expand...
Click to collapse
Odin uses tars. Different compression type. If you hook the USB up to the phone while in recovery, it should load adb mode drivers on the comp. Did you have a ROM already on internal? If so, just factory reset, wipe system, load ROM and gapps.
Sent from my SGH-I747 using xda premium

gunz.jones said:
Odin uses tars. Different compression type. If you hook the USB up to the phone while in recovery, it should load adb mode drivers on the comp. Did you have a ROM already on internal? If so, just factory reset, wipe system, load ROM and gapps.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Well, I was just going to root the phone first so I could use Titanium before flashing, so I never ended up putting the ROM on the internal SD.
When I connect the phone when CWM is up, drivers attempt to install but fail.

There are threads literally for every question you have asked I would suggest reading them before ever flashing anything on your phone
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

aaroncal said:
There are threads literally for every question you have asked I would suggest reading them before ever flashing anything on your phone
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Trust me, I have read them. I saw the thread on flashing the international GSM image, but I don't get how I would get back to stock after doing that.
Honestly, I wish I hadn't done it and made a thread before I did anything, but it seems as if curiosity and laziness got me.

grazed said:
Trust me, I have read them. I saw the thread on flashing the internation GSM image, but I don't get how I would get back to stock after doing that.
Honestly, I wish I hadn't done it and made a thread before I did anything, but it seems as if curiosity and laziness got me.
Click to expand...
Click to collapse
Get a tar of the stock ICS firmware. Follow the directions while in download mode to flash. TiBU is useless to freeze anything if you're going to load a ROM anyway. Don't be lazy and just reload apps manually. You should always have a backup plan.
For sh*ts and giggles, go into cwm and just factory reset.
Since adb drivers arent loading for you, I'm not going through that process with you. For future though, you will want adb knowledge. Look it up.
Sent from my SGH-I747 using xda premium

gunz.jones said:
Get a tar of the stock ICS firmware. Follow the directions while in download mode to flash. TiBU is useless to freeze anything if you're going to load a ROM anyway. Don't be lazy and just reload apps manually. You should always have a backup plan.
For sh*ts and giggles, go into cwm and just factory reset.
Since adb drivers arent loading for you, I'm not going through that process with you. For future though, you will want adb knowledge. Look it up.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I used this thread to flash back to stock AT&T ICS:
http://forum.xda-developers.com/showthread.php?t=1727443
Didn't work. It still boots into a black screen with a blue LED after the Samsung logo fades. Factory reset also went through, but nothing worked. It just booted into a blank screen again, but with the AT&T sound afterwards.
Sorry for being an idiot, I'm getting kinda desperate here, and I totally realize that this was a bad call on my part without more research.

grazed said:
I used this thread to flash back to stock AT&T ICS:
http://forum.xda-developers.com/showthread.php?t=1727443
Didn't work. It still boots into a black screen with a blue LED after the Samsung logo fades. Factory reset also went through, but nothing worked. It just booted into a blank screen again, but with the AT&T sound afterwards.
Sorry for being an idiot, I'm getting kinda desperate here, and I totally realize that this was a bad call on my part without more research.
Click to expand...
Click to collapse
Did Odin show a pass on flash?
Sent from my SGH-I747 using xda premium

gunz.jones said:
Did Odin show a pass on flash?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
This is what it showed:
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!

Sounds like problems Motorola gave grief with on the droids and their flashing tool. I'm looking for a jb tar file. When you used cwm and used Odin, both of them should have removed any times that would cause and issue. Especially since odin of stock fw would be like ghosting an image. Try using the toolkit to lock everything up and go back to stock completely.
Samsung stock image for jb : http://samsung-updates.com/device/?id=SGH-I747
Sent from my SGH-I747 using xda premium

gunz.jones said:
Sounds like problems Motorola gave grief with on the droids and their flashing tool. I'm looking for a jb tar file. When you used cwm and used Odin, both of them should have removed any times that would cause and issue. Especially since odin of stock fw would be like ghosting an image. Try using the toolkit to lock everything up and go back to stock completely.
Samsung stock image for jb : http://samsung-updates.com/device/?id=SGH-I747
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Unfortunately can't use anything in the toolkit since it's needing me to be booted into the OS first with debugging on (I'm stuck with download mode or CWM).

grazed said:
Unfortunately can't use anything in the toolkit since it's needing me to be booted into the OS first with debugging on (I'm stuck with download mode or CWM).
Click to expand...
Click to collapse
Tried using the jb stock image?
http://developer.android.com/tools/help/adb.html for adb use and information. To get the drivers to work, try loading the naked drivers pack. It includes Samsung drivers. Remove all Samsung installed crap from your comp and reboot. Manually install drivers by forcing legacy devices or by telling the computer you have the disk if needed after hooking phone back up.
Sent from my SGH-I747 using xda premium

gunz.jones said:
Tried using the jb stock image?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Couldn't find it, but I'm in the middle of downloading this to see if it works:
http://forum.xda-developers.com/showthread.php?t=1739426

Holy crap it worked! Thank you for all of your help.

grazed said:
Holy crap it worked! Thank you for all of your help.
Click to expand...
Click to collapse
Good deal.
Sent from my SGH-I747 using xda premium

Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

Related

[Q] Can't get Galaxy S3 (Tmobile) to boot

So after rooting my recent Tmobile GS3 and then attempting to flash the overclock my phone simply wont turn on. The root did fine, and I was able to install setcpu and everything but the second I installed the overclock my phone shut down. Now whenever I attempt to turn my phone it just flashes the Samsung insignia and then it shuts down. I can get to the Downloading screen (by pressing Volume down + power + home) but can I do anything about that? If someone can help me out that would be amazing. Thanks.
Also, I tried flashing a stock rom with Odin and it keeps failing. If anyone knows anything thank you.
Can you get into recovery? Volume up + home + power
If so then flash back to a nandroid backup or to a new rom or whatever.
If recovery wont boot, try again but look for blue text at the top right corner that says "booting recovery" when the sammy logo comes up. I've had it where my recovery wouldnt boot but I saw that for a split second when I tried. If this is the case, get back into download mode and flash the insecure boot + cwm again with Odin. Then you should be able to get into recovery.
If Odin fails to flash, reboot you're computer and try a different USB cable.
Sent from my SGH-T999 using xda app-developers app
If you can get to download mode, then you're probably in good shape.
There are a few tricks that can be found in this thread:
http://forum.xda-developers.com/showthread.php?t=1725839
Just make sure when you odin/flash something, you are flashing the correct image for your phone/carrier.
same boat here
well I thought I'd give it a try using instructions here. and now I'm hosed. I was able to root and install the ALLINONE (Insecure Boot, CWM & Busybox) rebooted, super user showed up in apps etc. I thought everything was fine. the next thing I tried was disable boot up animation and now the phone won't boot up at all.
I can get into the recovery and download screens but whenever I try to restore I get "can't mount /sdcard/"
The toolkit no longer sees my phone either. When it's plugged in and the toolkit is active, it just cycles over and over "samsung" then "Samsung Galaxy SIII" logo then black screen repeat.
The toolkit keeps giving message either "device not found" or "Waiting for USB debugging to be enabled".
download mode/ Odin mode is working- I have downloaded the file:
Samsung-Updates.com-SGH-T999_TMB_1_20120523140229_ogindgck8z.zip
but haven't been able to get Odin to load it ... I have to be in download mode for that to work right?
Any tips are appreciated.
using TMO SGH-T999
Try flashing the same file you did to get root with Odin... then you should at least be able to get in to recovery and from there you're golden.
Sent from my SGH-T999 using xda app-developers app
andham95 said:
Try flashing the same file you did to get root with Odin... then you should at least be able to get in to recovery and from there you're golden.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I tried that a few times to no avail and gave up. figured out that I needed to unzip the stock rom from t-mobile in order for Odin to recognize and load it. That's where I left it last night. So I'm now back to stock and reloading all my apps and settings.
I'm ok with that, this is my first go at flashing/rooting. My phone works ... and for that I'm breathing a little easier. thanks for your reply!
danfinger said:
I tried that a few times to no avail and gave up. figured out that I needed to unzip the stock rom from t-mobile in order for Odin to recognize and load it. That's where I left it last night. So I'm now back to stock and reloading all my apps and settings.
I'm ok with that, this is my first go at flashing/rooting. My phone works ... and for that I'm breathing a little easier. thanks for your reply!
Click to expand...
Click to collapse
AWESOME!
Now time to fook it up again.
You've recovered from your first fubar and now you're a root/rom veteran! :good:
CZ Eddie said:
AWESOME!
Now time to fook it up again.
You've recovered from your first fubar and now you're a root/rom veteran! :good:
Click to expand...
Click to collapse
Next lesson I need to study is the full backup so I don't have to re-do everything (took about 1.5 hours) -- the hardest one was my tasker macros.
Titanium backup......nuff said.lol
Sent from my SGH-T999 using xda premium
CZ Eddie said:
AWESOME!
Now time to fook it up again.
You've recovered from your first fubar and now you're a root/rom veteran! :good:
Click to expand...
Click to collapse
Lol, I needed that. Thanks. I remember when I first screwed up my hero a long time ago and had to get help. "I'm going to stay stock for a while", I think that feeling lasted a day if that.
Sent from my SPH-L710 using Tapatalk 2
blacknight1114 said:
Titanium backup......nuff said.lol
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
definitely, best tool to have. Get the paid version or its a pain to restore everything. Better than not having it but still.
Sent from my SPH-L710 using Tapatalk 2
lopezpm said:
definitely, best tool to have. Get the paid version or its a pain to restore everything. Better than not having it but still.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
yep. That was the first thing I did after rooting. everything is nicely backed up to the internal SD as well as dropbox. Thanks! Looking forward to some really slick ROMs.
this is a post
danfinger said:
well I thought I'd give it a try using instructions here. and now I'm hosed. I was able to root and install the ALLINONE (Insecure Boot, CWM & Busybox) rebooted, super user showed up in apps etc. I thought everything was fine. the next thing I tried was disable boot up animation and now the phone won't boot up at all.
I can get into the recovery and download screens but whenever I try to restore I get "can't mount /sdcard/"
The toolkit no longer sees my phone either. When it's plugged in and the toolkit is active, it just cycles over and over "samsung" then "Samsung Galaxy SIII" logo then black screen repeat.
The toolkit keeps giving message either "device not found" or "Waiting for USB debugging to be enabled".
download mode/ Odin mode is working- I have downloaded the file:
Samsung-Updates.com-SGH-T999_TMB_1_20120523140229_ogindgck8z.zip
but haven't been able to get Odin to load it ... I have to be in download mode for that to work right?
Any tips are appreciated.
using TMO SGH-T999
Click to expand...
Click to collapse

[Q] Possible bricking. Recovery methods and alternatives?

Much like the others here I rooted my T-mobile galaxy s3. The root worked fine and all. Then I downloaded this font changer app (I forget the name but it required a root) I go on to select a font then I go on to reboot like it said. Then bam, my phone gets stuck on the samsung screen. I then proceeded to use odin to put the stock image back on it (I think that's what it's called) It went through. I also did the factory wipe via the recovery screen. But now my phone would turn on, show "Samsung Galaxy S3," go to a black screen, play the t-mobile jingle, and the only thing that happens is the LED flashes but still nothing on the screen. I've tried virtually everything and I still think there is something else I need to do.
Help please?
I had a similar problem, this is what I did. Try and boot into cwr by hilding the vol up +power+home when it vibrates let go. Now u should b in cwr. Now wipe everything, dalvic, factory wipe fix permission. And flash a new rom cm10 will do..
Sent from my SGH-T999 using xda premium
kipster3001 said:
I had a similar problem, this is what I did. Try and boot into cwr by hilding the vol up +power+home when it vibrates let go. Now u should b in cwr. Now wipe everything, dalvic, factory wipe fix permission. And flash a new rom cm10 will do..
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
The problem is that he may be rooted but doesn't have cwm recovery.
If that's the case then you need to flash cwm recovery first.
I would also try flashing stock rom again or after flashing cwr download nandroid backup of stock rom.
Good luck and let us know if that worked
Sent from my SGH-T999 using xda app-developers app
HajmeR said:
The problem is that he may be rooted but doesn't have cwm recovery.
If that's the case then you need to flash cwm recovery first.
I would also try flashing stock rom again or after flashing cwr download nandroid backup of stock rom.
Good luck and let us know if that worked
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
That sounds like a reasonable solution. Can I get a link to the CWM recovery file as well as a guide to it so I don't dig myself into a deeper hole? lol
Actually if you're stock recovery, factory reset should wipe everything. Including internal sd, just so you know.
If that doesn't work it'd probably be cleaner to just odin the root66 fw. But if you prefer the other way, you can find recovery files at the top of post 2 in the fw thread. Root66 is at the top of post 1.
I still need to add a few recoveries so if you don't see one you want let me know.
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Actually if you're stock recovery, factory reset should wipe everything. Including internal sd, just so you know.
If that doesn't work it'd probably be cleaner to just odin the root66 fw. But if you prefer the other way, you can find recovery files at the top of post 2 in the fw thread. Root66 is at the top of post 1.
I still need to add a few recoveries so if you don't see one you want let me know.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
OMG!!! It is working now!!! Thank you so so so much!!!! lol
Hey guys,
Was trying to root my stock T-Mobile Galaxy S3, and everything was going fine but after it rebooted from Odin, the screen stayed black, and only the blue LED was pulsing. I assume it has something to do with my phone being on 4.1.1 and the S3 toolkit not liking that. I tried to flash the stock Rom to get it out of this, but now the same thing is still happening. I have tried multiple cache wipes/factory resets and multiple other stock ROMs. I always without fail get the same thing Samsung splash screen/Blue pulsing LED/start up sound and black screen. I'm getting really frustrated and worried. Can anyone help?
Misfit77 said:
Hey guys,
Was trying to root my stock T-Mobile Galaxy S3, and everything was going fine but after it rebooted from Odin, the screen stayed black, and only the blue LED was pulsing. I assume it has something to do with my phone being on 4.1.1 and the S3 toolkit not liking that. I tried to flash the stock Rom to get it out of this, but now the same thing is still happening. I have tried multiple cache wipes/factory resets and multiple other stock ROMs. I always without fail get the same thing Samsung splash screen/Blue pulsing LED/start up sound and black screen. I'm getting really frustrated and worried. Can anyone help?
Click to expand...
Click to collapse
That's actually the exact problem I just solved. You would need Odin 3.04 (well that's what I used) and you need to flash root66 like one of the previous posters here said. It recovered my phone AND rooted it. So try that and tell us what happened.
treythetree said:
That's actually the exact problem I just solved. You would need Odin 3.04 (well that's what I used) and you need to flash root66 like one of the previous posters here said. It recovered my phone AND rooted it. So try that and tell us what happened.
Click to expand...
Click to collapse
When I try the root66 it fails in odin. I used the root66_TMO_T999UVDLJA one. First, I had toolkit convert it into a .tar. Then I chose option 8 to flash a stock rom. I skipped ahead to flashing the rom and factory reset like it prompted. Then I tried to flash the .tar and it fails. ..:/. I don't know what else to do.
Misfit77 said:
When I try the root66 it fails in odin. I used the root66_TMO_T999UVDLJA one. First, I had toolkit convert it into a .tar. Then I chose option 8 to flash a stock rom. I skipped ahead to flashing the rom and factory reset like it prompted. Then I tried to flash the .tar and it fails. ..:/. I don't know what else to do.
Click to expand...
Click to collapse
Actualy I don't use toolkit so I might be wrong, but I don't think you need to convert root66 to tar. Just skip the toolkit. Put your phone into download mode, open odin, connect your phone to pc and flash root66. Check root66 thread for some info about unziping it or converting to anything. All info should be in op. If there is nothing about it then flash it as it is. Make sure that you have phone drivers installed and turn off kies.
I hope it helps.
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 07:05 PM ---------- Previous post was at 06:49 PM ----------
I've just checked root66 thread. You don't have to convert it or unzip it. Just flash as it is. Your problem might came from converting that file to tar.
Sent from my SGH-T999 using xda app-developers app
Misfit77 said:
When I try the root66 it fails in odin. I used the root66_TMO_T999UVDLJA one. First, I had toolkit convert it into a .tar. Then I chose option 8 to flash a stock rom. I skipped ahead to flashing the rom and factory reset like it prompted. Then I tried to flash the .tar and it fails. ..:/. I don't know what else to do.
Click to expand...
Click to collapse
Unzip the fw using 7zip. Then odin flash the .tar.md5 file you just extracted.
Sent from my SGH-T999 using xda premium
Don't use toolkit for that just go to root66 thread. Download everything what you need from there and follow steps in 2 post under odin use.
Good luck
Sent from my SGH-T999 using xda app-developers app
Originally Posted by Misfit77
When I try the root66 it fails in odin. I used the root66_TMO_T999UVDLJA one. First, I had toolkit convert it into a .tar. Then I chose option 8 to flash a stock rom. I skipped ahead to flashing the rom and factory reset like it prompted. Then I tried to flash the .tar and it fails. ..:/. I don't know what else to do.
Click to expand...
Click to collapse
Actualy I don't use toolkit so I might be wrong, but I don't think you need to convert root66 to tar. Just skip the toolkit. Put your phone into download mode, open odin, connect your phone to pc and flash root66. Check root66 thread for some info about unziping it or converting to anything. All info should be in op. If there is nothing about it then flash it as it is. Make sure that you have phone drivers installed and turn off kies.
I hope it helps.
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 07:05 PM ---------- Previous post was at 06:49 PM ----------
I've just checked root66 thread. You don't have to convert it or unzip it. Just flash as it is. Your problem might came from converting that file to tar.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help, I'll try it when o get home.
Sent from my WX435 using xda app-developers app
Actually I was a bit wrong, like DocHoliday wrote, you just have to unzip it and use tar.md5 file inside. The rest is as I wrote before.
Good luck and let us know how it went
Sent from my SGH-T999 using xda app-developers app
HajmeR said:
Actually I was a bit wrong, like DocHoliday wrote, you just have to unzip it and use tar.md5 file inside. The rest is as I wrote before.
Good luck and let us know how it went
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
It worked!!! Thank you both so much!! I was really getting frustrated.
Misfit77 said:
It worked!!! Thank you both so much!! I was really getting frustrated.
Click to expand...
Click to collapse
Good to hear that! If you will have some problems with sgs3 in the future you can pm me and I will try to help. Just saying that because I'm not looking into q&a very often. Good luck and happy flashing
Sent from my SGH-T999 using xda app-developers app
HajmeR said:
Good to hear that! If you will have some problems with sgs3 in the future you can pm me and I will try to help. Just saying that because I'm not looking into q&a very often. Good luck and happy flashing
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I will, thanks again!
Did the same thing
I did the same thing. I used the toolkit and was distracted by my son which ended up in me skipping over areas I thought I read and missed the part about JellyBean creating soft-brick.. It did install CWM though . Low and behold, I soft-bricked my phone with the pulsing blue LED from HELL. I kept having issues flashing everything, luckily the toolkit DID install CWM for me which was of no help. When I used Odin 3.0.4 it worked flawlessly with the stock rooted t999 rom which I have attached along with Odin 3.0.4.
Here is how to fix your soft-brick with the black screen and blue LED from hell:
1.) Download files attached and EXTRACT > root66_TMO_T999UVDLJA.7z AND Odin_3.0.4_Files.zip
2.) Boot into download updates screen by pressing and holding Home Button, Volume Down Button, and Power Button at same time until you boot into downloading updates screen.
3.) Plug in your phone to your pc
4.) Open Odin 3.0.4 make sure Auto Reboot and F . Reset Time are checked
5.) Click the PDA button at the right, select boot-stock-tmobile-sgh-t999
7.) Click the START button.
8.) Repeat Steps 2-4
9.) Click the PDA button at the right, select root66_TMO_T999UVDLJA.tar.md5
10.) Click the START button and you should see it install things you never saw before like BOOT, SYSTEM, MODEM, etc. (not in that order) at the top left where it shows installation progress (that little green rectangle)

Failed Root Attempt On Previously Unrooted I317UCALK7 - Bricked?

I wanted to try an AKOP ROM or two on my completely stock, never rooted Note 2 running the OTA UCALK7 update. I followed the guide here (flash the SU injected stock UCALJ2 image) to root and now my note gets stuck at the Samsung logo. I have tried the following:
Downloaded the completely stock UCALJ2 unrooted image and flashed via ODIN.
Tried flashing both stock and rooted ROMs on another computer using the stock USB cable.
Flashed CWM touch via ODIN after flashing rooted UCALJ2 image, it can boot to CWM but fails miserably most likely to the lack of root.
My guess is it's bricked because sammy closed the root hole in the UCALK7 update and flashing back to rooted UCALJ2 isn't enough to bypass the patched exploit. Is there an ODIN flashable complete UCALK7 image that I can try (I've looked to no end, all I can find are rooted zips flashable via CWM) or am I really up the creek?
Pull the battery.
Hold the Center Home Button + Vol Down + Power
Slide the battery in.
If you do this right you can get into odin before the Samsung logo. I just had the same problem because I flashed the wrong recovery. It worked for me.
shakabra said:
Pull the battery.
Hold the Center Home Button + Vol Down + Power
Slide the battery in.
If you do this right you can get into odin before the Samsung logo. I just had the same problem because I flashed the wrong recovery. It worked for me.
Click to expand...
Click to collapse
Thanks but I can get into Odin and flash the stock ROM just fine. It then reboots and gets stuck at the Samsung logo.
Once upon flash completely stock threw Odin.... do the three finger salute, go into stock recovery and factory reset... done
Sent from my SGH-I317 using xda premium
twanskys204 said:
Once upon flash completely stock threw Odin.... do the three finger salute, go into stock recovery and factory reset... done
Sent from my SGH-I317 using xda premium
Click to expand...
Click to collapse
The three finger salute lol:thumbup:
Sent from my GT-N7105 using Tapatalk 2
twanskys204 said:
Once upon flash completely stock threw Odin.... do the three finger salute, go into stock recovery and factory reset... done
Sent from my SGH-I317 using xda premium
Click to expand...
Click to collapse
Thanks - I actually figured that part out since my second post. The phone boots after the factory reset however I don't get phone/data service. I've since tried flashing the two AT&T modems I could find, atti317ucalj2modemfixed.zip and ATT K7 Modem - Baseband.zip. Neither resolve the issue.
Cheack ur apn
Sent from my SGH-I317 using xda premium
twanskys204 said:
Cheack ur apn
Sent from my SGH-I317 using xda premium
Click to expand...
Click to collapse
Thanks but I can't even enter the network configuration settings - it tells me to insert a SIM. My SIM is in the phone.
I'm having other problems too which I think are partition related. Apps are acting funny, saying there isn't space on the phone (dropbox can't download anything, etc). I'm trying to get TriangleAway installed so I can just RMA it but I can't even download it to my phone. Also a CWM fix permissions fails even though I grant it root access.
It's really simple..download firmware from Sammobile.com flash it in Odin.. u might get stuck on the Samsung screen, if that happens factory reset. Make sure your downloading right file...u r now messing with Odin and it doesn't forgive
Sent from my SGH-I317 using xda premium
twanskys204 said:
It's really simple..download firmware from Sammobile.com flash it in Odin.. u might get stuck on the Samsung screen, if that happens factory reset. Make sure your downloading right file...u r now messing with Odin and it doesn't forgive
Sent from my SGH-I317 using xda premium
Click to expand...
Click to collapse
I know what you're saying, I'm definitely using the right file and process. I'm a pretty seasoned veteran when it comes to rooting/odin/RSD/fastboot, etc. I've run custom ROMs on dozens of phones since the G1. What's happening to me is apparently not a common failure with the note 2 or GS3. Is there a PIT file available for the AT&T Note 2? I see one for the Verizon Note 2 but I wouldn't dare try to flash that.
There is a pit file around but I really don't think it's that.
And also just checking don't mean to insult ur intelligence but if u are using Odin it will be a .tar, if it's a recovery its I .zip
Sent from my SGH-I317 using xda premium
twanskys204 said:
There is a pit file around but I really don't think it's that.
And also just checking don't mean to insult ur intelligence but if u are using Odin it will be a .tar, if it's a recovery its I .zip
Sent from my SGH-I317 using xda premium
Click to expand...
Click to collapse
Yeah, it's a tar file I'm flashing through Odin, got it from SamsungUpdates: Samsung-Updates.com-SGH-I317_ATT_1_20121005095854_bpaaavv07o.
I also tried flashing the stock ROM in deodex'd zip form after I got a custom recovery on there, still no dice. The non-functioning modem and lack of proper root/storage affects both Sammy and CM/AKOP based ROMs. I don't know about the modem part but I've seen weird things like this when the NAND starts going bad and things written to it don't "stick." I don't think that's the case here since it's only on its 4th or 5th flash. More than likely the latter problem is a file system issue. I have no idea about the radio.
I'm going to try and exchange it tomorrow. At least I got the flash count cleared and I'm back on a stock ROM (with the same problems).

[Q] Can not boot into recovery

Can someone please help me. I recently tried flashing a ROM that used aroma. I followed OP install instructions and in the middle of selecting options in aroma, aroma froze. I battery pulled and now it when i try booting into recovery, all it does is show the Team Win logo (I'm on the latest TWRP) then the screen turns black and attempts to reboot the system. But there is no system so it gets stuck on the SAMSUNG GALAXY SIII screen.I was on CM10.1 and it is stuck on the boot image with the CM guy. Someone please help
solis888 said:
Can someone please help me. I recently tried flashing a ROM that used aroma. I followed OP install instructions and in the middle of selecting options in aroma, aroma froze. I battery pulled and now it when i try booting into recovery, all it does is show the Team Win logo (I'm on the latest TWRP) then the screen turns black and attempts to reboot the system. But there is no system so it gets stuck on the SAMSUNG GALAXY SIII screen.I was on CM10.1 and it is stuck on the boot image with the CM guy. Someone please help
Click to expand...
Click to collapse
If I'm not wrong, you may have bricked your device
Sent from my SPH-L710 using xda premium
solis888 said:
Can someone please help me. I recently tried flashing a ROM that used aroma. I followed OP install instructions and in the middle of selecting options in aroma, aroma froze. I battery pulled and now it when i try booting into recovery, all it does is show the Team Win logo (I'm on the latest TWRP) then the screen turns black and attempts to reboot the system. But there is no system so it gets stuck on the SAMSUNG GALAXY SIII screen.I was on CM10.1 and it is stuck on the boot image with the CM guy. Someone please help
Click to expand...
Click to collapse
When booting, there are three options: System (regular boot), Recovery, and Download.
If two aren't working, try the third. Using Download Mode and Odin, you can reflash the recovery. Just follow the Rooting Guide. Hope you gt it fixed.
topherk said:
When booting, there are three options: System (regular boot), Recovery, and Download.
If two aren't working, try the third. Using Download Mode and Odin, you can reflash the recovery. Just follow the Rooting Guide. Hope you gt it fixed.
Click to expand...
Click to collapse
Made my answer look like s%#t lol
Sent from my SPH-L710 using xda premium
Aweshocked said:
If I'm not wrong, you may have bricked your device
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Highly doubt i bricked it because it still can enter download mode.
topherk said:
When booting, there are three options: System (regular boot), Recovery, and Download.
If two aren't working, try the third. Using Download Mode and Odin, you can reflash the recovery. Just follow the Rooting Guide. Hope you gt it fixed.
Click to expand...
Click to collapse
Ah thank you hopefully this works
Aweshocked said:
Made my answer look like s%#t lol
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
In my opinion, Hard Bricking is when the phone doesn't respond at all. Most people even say that the charging light is the only thing that will turn on. Since OP was able to boot up and at least see the TWRP boot screen, it definitely wasn't a brick. Since he was getting something other than a blank screen, not all hope was lost.
Okay well Odin kept showing fail. I followed the intructions exactly, but it always showed fail. Any ideas?
Do you have Kies installed? If so, uninstall it and reboot (the computer) and try again
If still nothing, try different cables, different ports, and a different computer if possible
CNexus said:
Do you have Kies installed? If so, uninstall it and reboot (the computer) and try again
If still nothing, try different cables, different ports, and a different computer if possible
Click to expand...
Click to collapse
Is it possible to uninstalled Kies while unable to access the rom, Recovery, or do anything in download Mode?
Actually, if your computer recognizes the device, you can try deleting the Kies files, but i don't know for sure
Sent from my SPH-L710 using xda premium
Aweshocked said:
Is it possible to uninstalled Kies while unable to access the rom, Recovery, or do anything in download Mode?
Actually, if your computer recognizes the device, you can try deleting the Kies files, but i don't know for sure
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Is Kies installed on your computer? It's a program on both the phone and on the computer.
topherk said:
Is Kies installed on your computer? It's a program on both the phone and on the computer.
Click to expand...
Click to collapse
CNexus said:
Do you have Kies installed? If so, uninstall it and reboot (the computer) and try again
If still nothing, try different cables, different ports, and a different computer if possible
Click to expand...
Click to collapse
It is installed on my computer but when i try uninstalling, it doesn't show up in control panel.
solis888 said:
It is installed on my computer but when i try uninstalling, it doesn't show up in control panel.
Click to expand...
Click to collapse
If you can't find it, just make sure the process isn't running. Ctr+Alt+Delete and look for the Kies running process and kill it and make sure it doesn't restart
Sent from my SPH-L710 using xda premium
Ah, sorry you're gonna have to get it off there, it interferes with ODIN :\
If all else fails, you can attempt to do a full wipe by using Odin to install a Stock TW Rom. I think there's a stickied guide around here somewhere with a fairly recent stock rom strictly for Odin. This will wipe everything on your phone but will leave your external SD untouched. Others have mentioned Kies, which I have never used so I have little that I can say about it.
Also, for future reference, there are two types of bricks: a soft brick and a hard brick. A hard brick is the one with a more concrete definition being that your phone/electronic device is just an expensive paperweight as the hardware/in-depth(wrong word but you get the meaning) software has been corrupted so much that the phone does nothing. This is most commonly seen with messed up boot managers due to the wrong rom being downloaded. A soft brick, on the other hand, is where a phone fails to operate but there is a chance for it to be recovered. This one is much more common and is what you are experiencing. It's off topic but yeah lol. Good luck with your phone.
porshce2 said:
If all else fails, you can attempt to do a full wipe by using Odin to install a Stock TW Rom. I think there's a stickied guide around here somewhere with a fairly recent stock rom strictly for Odin. This will wipe everything on your phone but will leave your external SD untouched. Others have mentioned Kies, which I have never used so I have little that I can say about it.
Also, for future reference, there are two types of bricks: a soft brick and a hard brick. A hard brick is the one with a more concrete definition being that your phone/electronic device is just an expensive paperweight as the hardware/in-depth(wrong word but you get the meaning) software has been corrupted so much that the phone does nothing. This is most commonly seen with messed up boot managers due to the wrong rom being downloaded. A soft brick, on the other hand, is where a phone fails to operate but there is a chance for it to be recovered. This one is much more common and is what you are experiencing. It's off topic but yeah lol. Good luck with your phone.
Click to expand...
Click to collapse
Aha! So you did Brick it, I was right
But I'm sorry for your troubles
Sent from my SPH-L710 using xda premium
CNexus said:
Ah, sorry you're gonna have to get it off there, it interferes with ODIN :\
Click to expand...
Click to collapse
I found it now and when i try uninstalling , the InstallShiels wizard shows that it is uninstalling Kies but gets stuck on Unregistering Modules
I uninstalled Kies and restarted PC but I still get the same problem.
In the message box from Odin i get the Following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> SetupConnection..
<ID:0/004>Initialization..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
and it stays frozen like that. Any ideas?
solis888 said:
I uninstalled Kies and restarted PC but I still get the same problem.
In the message box from Odin i get the Following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> SetupConnection..
<ID:0/004>Initialization..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
and it stays frozen like that. Any ideas?
Click to expand...
Click to collapse
Have u waited long enough to tell if it was frozen? Or is it just not responding?
Sent from my SPH-L710 using xda premium
Aweshocked said:
Have u waited long enough to tell if it was frozen? Or is it just not responding?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Failed multiple times
Finally fixed it. Used sextape's Odin mc3 leak "nodata" rooted. Worked perfectly

[Q] Phone boots but is unusable

So last night I upgraded to 4.3 from stock 4.1.2 through OTA. The phone boots, but I get the message "Unfortunately, S Suggest has stopped" and when I close that dialog, it pops up again almost instantly. If I am sneaky, I can get past the lock-screen, but that is it. It also spontaneously restarts.
Getting past the lockscreen reveals that not only is S Suggest continually crashing, but many other programs are as well. I didn't want to try anything to fix this without first getting some advice for fear I'd make it worse.
When I had 4.0.4, this phone was rooted. I lost root through the 4.1.2 update. CPU tuner continued to work after the 4.1 update, so I never bothered to re-root. Could this be causing an issue with 4.3?
Have you tried using Odin to reflash the stock ROM to fix the issue?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Bruce Lee said:
Have you tried using Odin to reflash the stock ROM to fix the issue?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
DO NOT DO THIS... Unless you want a brick. Once you are on 4.3 bootloaders you're stuck there. Any attempt to Odin will result in a hard brick (which can be recovered via SD card now)
You can flash any rom you want to via custom recovery as long as it doesn't modify the bootloader it is OK. But do not even think about using Odin.
Odin is now a Nasty 4 letter word. ODIN=HARDBRICK
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
DO NOT DO THIS... Unless you want a brick. Once you are on 4.3 bootloaders you're stuck there. Any attempt to Odin will result in a hard brick (which can be recovered via SD card now)
You can flash any rom you want to via custom recovery as long as it doesn't modify the bootloader it is OK. But do not even think about using Odin.
Odin is now a Nasty 4 letter word. ODIN=HARDBRICK
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
First off, thank you for the reply.
I have only ever flashed roms via Odin and honestly have no idea what custom recovery means. Is that something I should have set up beforehand? If this is fixable, could you point me to some info on how to do this?
I was hoping that the solution would be as simple as a factory reset, but I guess this is not the case?
anonymous78 said:
First off, thank you for the reply.
I have only ever flashed roms via Odin and honestly have no idea what custom recovery means. Is that something I should have set up beforehand? If this is fixable, could you point me to some info on how to do this?
I was hoping that the solution would be as simple as a factory reset, but I guess this is not the case?
Click to expand...
Click to collapse
Yes a factory reset should do the trick. Don't flash anything just boot into recovery and factory reset. Sometimes these problems occur after firmware updates especially if you were rooted previously.
Sent from my SGH-I747M using Tapatalk
If you're still having issues after a factory reset do a search for how to install custom recovery (TWRP or CWM) I personally prefer TWRP some prefer CWM. So you can flash a rom only without a bootloader. I can link you to the rom I am running now if you need me to. It is very stable and I can't find anything wrong with it as of right now.
But be warned if you are under warranty you will void your warranty by doing so and no amount of using triangle away will keep Samsung from knowing that you voided your warranty.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Florad77 said:
Yes a factory reset should do the trick. Don't flash anything just boot into recovery and factory reset. Sometimes these problems occur after firmware updates especially if you were rooted previously.
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
Ok, I tried a factory reset. It boots to the welcome screen but it is unresponsive and restarts after ~20 seconds. When it restarts it gets stuck on the boot animation. The factory reset is the only thing I have done to the phone since these issues began, is there something else I should have done?
theramsey3 said:
If you're still having issues after a factory reset do a search for how to install custom recovery (TWRP or CWM) I personally prefer TWRP some prefer CWM. So you can flash a rom only without a bootloader. I can link you to the rom I am running now if you need me to. It is very stable and I can't find anything wrong with it as of right now.
But be warned if you are under warranty you will void your warranty by doing so and no amount of using triangle away will keep Samsung from knowing that you voided your warranty.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I would appreciate any recommendations you have for a rom if you are sure it will work after trying to install 4.3
I'm starting to get very anxious.
anonymous78 said:
Ok, I tried a factory reset. It boots to the welcome screen but it is unresponsive and restarts after ~20 seconds. When it restarts it gets stuck on the boot animation. The factory reset is the only thing I have done to the phone since these issues began, is there something else I should have done?
Click to expand...
Click to collapse
Is your phone under warranty? If so send it in to be fixed. If your phone isn't under warranty or you simply don't care about your warranty please click Show contents below
Go here to install recovery and Go here for all the goodies you might want to flash I used this Rom by Loserskater on my phone
theramsey3 said:
Is your phone under warranty? If so send it in to be fixed. If your phone isn't under warranty or you simply don't care about your warranty please click Show contents below
Go here to install recovery and Go here for all the goodies you might want to flash I used this Rom by Loserskater on my phone
Click to expand...
Click to collapse
Not entirely sure I understand the process here.
-I need to flash TWRP through Odin, though I thought you said to absolutely not use Odin?
-Then I flash SuperSU and KnoxRemover somehow?
-But then I have to access the play store? Will I even be able to do this? Or is this part optional for what I want?
-I have no idea what I'm suppose to do with the second link. Do I have to flash a bootloader, kernel, radio, and rom separately?
I feel like an idiot for not understanding this.
anonymous78 said:
Not entirely sure I understand the process here.
-I need to flash TWRP through Odin, though I thought you said to absolutely not use Odin?
-Then I flash SuperSU and KnoxRemover somehow?
-But then I have to access the play store? Will I even be able to do this? Or is this part optional for what I want?
-I have no idea what I'm suppose to do with the second link. Do I have to flash a bootloader, kernel, radio, and rom separately?
I feel like an idiot for not understanding this.
Click to expand...
Click to collapse
Ok on that note I do need to elaborate, Odin is only bad if you are trying to flash back to something prior to 4.3 because all the odin .tar.md5 files contain a boot loader, and the bootloader is the killer of these phones after the 4.3 upgrade.
* flash TWRP with Odin (that is safe)
* Dont worry with the SuperSU and KnoxRemover at this point right now Unless you want root access(but wait till after you get the ROM to boot again.)
* You will then need the ROM flash it in TWRP, wipe the dalvik and cache, then reboot the system
If you have any further Questions feel free to ask
theramsey3 said:
DO NOT DO THIS... Unless you want a brick. Once you are on 4.3 bootloaders you're stuck there. Any attempt to Odin will result in a hard brick (which can be recovered via SD card now)
You can flash any rom you want to via custom recovery as long as it doesn't modify the bootloader it is OK. But do not even think about using Odin.
Odin is now a Nasty 4 letter word. ODIN=HARDBRICK
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Sorry for the scare all. I apologize. I guess you learn something new everyday. I must be out the loop then.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
theramsey3 said:
Ok on that note I do need to elaborate, Odin is only bad if you are trying to flash back to something prior to 4.3 because all the odin .tar.md5 files contain a boot loader, and the bootloader is the killer of these phones after the 4.3 upgrade.
* flash TWRP with Odin (that is safe)
* Dont worry with the SuperSU and KnoxRemover at this point right now Unless you want root access(but wait till after you get the ROM to boot again.)
* You will then need the ROM flash it in TWRP, wipe the dalvik and cache, then reboot the system
If you have any further Questions feel free to ask
Click to expand...
Click to collapse
I don't think TWRP is flashing correctly. This is suppose to replace the default android recovery that I access by holding Vol up+menu at boot right?
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
//It restarts here, boots to setup, crashes as usual, hangs on a second restart. ~1 minute later Odin says it passes
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Removed!!
As far as I can tell, nothing has changed
anonymous78 said:
I don't think TWRP is flashing correctly. This is suppose to replace the default android recovery that I access by holding Vol up+menu at boot right?
As far as I can tell, nothing has changed
Click to expand...
Click to collapse
So when you try to boot into recovery it still takes you to the stock recovery?
not to try to make anyone feel retarded, but yes to get to recovery press vol up, home key and then power button for 4 seconds(how long it takes on my phone then I release the power button wait 2 seconds) and release all buttons
theramsey3 said:
So when you try to boot into recovery it still takes you to the stock recovery?
not to try to make anyone feel retarded, but yes to get to recovery press vol up, home key and then power button for 4 seconds(how long it takes on my phone then I release the power button wait 2 seconds) and release all buttons
Click to expand...
Click to collapse
Yep, that send me to stock recovery.
anonymous78 said:
Yep, that send me to stock recovery.
Click to expand...
Click to collapse
Try to get CWM on it. I found a link here but it is a huge file 118MB. http://forum.xda-developers.com/showthread.php?t=1703488
Are you using odin 3.09 now? or still using the 3.07?
theramsey3 said:
Try to get CWM on it. I found a link here but it is a huge file 118MB. http://forum.xda-developers.com/showthread.php?t=1703488
Are you using odin 3.09 now? or still using the 3.07?
Click to expand...
Click to collapse
Ok so I was using 3.07, I tried 3.09 with CWM and TWRP and had the same results as before. Using the toolkit (which doesn't officially support 4.3--not sure if that's important) I get the message "waiting for USB debugging to be enabled", and of course I can't enable this.
anonymous78 said:
Ok so I was using 3.07, I tried 3.09 with CWM and TWRP and had the same results as before. Using the toolkit (which doesn't officially support 4.3--not sure if that's important) I get the message "waiting for USB debugging to be enabled", and of course I can't enable this.
Click to expand...
Click to collapse
I'm going to have to sit back and wait for someone else to chime in on this one?
Maybe you can try to flash the Odin .Tar again and see if maybe it will boot. I read somewhere tonight that some people are having to flash some things more than one time to get them to work right.
It probably took my phone 5 minutes to boot after I recovered it. I really thought I hadn't fixed it then it just booted. So it might just take longer than you expect?
I will try to help if I can think of anything thing else to try but as of now I am out of ideas.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
I'm going to have to sit back and wait for someone else to chime in on this one?
Maybe you can try to flash the Odin .Tar again and see if maybe it will boot. I read somewhere tonight that some people are having to flash some things more than one time to get them to work right.
It probably took my phone 5 minutes to boot after I recovered it. I really thought I hadn't fixed it then it just booted. So it might just take longer than you expect?
I will try to help if I can think of anything thing else to try but as of now I am out of ideas.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Is there no way to use stock recovery to flash a stock 4.3 rom?
anonymous78 said:
Is there no way to use stock recovery to flash a stock 4.3 rom?
Click to expand...
Click to collapse
Not on AT&T there isn't. You can flash a stock firmware with odin if you have an I747M, Do Not Try this with an AT&T phone after going to 4.3 bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Categories

Resources