Hello Everyone.
I have been reading xda developers for a month now and got some some custom rom's like CM9 nightlies and CM7 nightlies.
I was using CM9 and it did have usb detection when it was released and i did not get a fix for that.
2 days ago I flashed ClockworkMod 6.0.1.3(as it was mentioned to do so before flashing the rom ) and the i flashed Gingerblur rom.
The rom started and i used to get a message "android.com.acore." failed to load. Never happened before!
So I re-flashed CM9 and it went into fastboot.
Read all the material on fastboot.
Tried "Kameshs and antdkings p350 toolkit v1.2" and further versions installed sdk but nthng works!
My pc shows "Code 10 " error in the abd interface.
I guess the usb is not getting connected to the pc properly and hence whatever i do after connecting to the pc is not helping.
In the kamesh toolkit the command dosent go forward saying "<waiting for the device>"
I hope some one can help as soon as possible!!:crying:
Related
I'm kind of stuck here. I'm not big into flashing roms and stuff.....but had issues with the one ROM I flashed 2 years agao so I thought I'd upgrade to CM10 finally. I flashed it properly using CWM and had a working rom....but forgot todarkside super wipe and to install the gapps.zip. So I thought I'd just do it over again. Everything seemed fine in the reinstallations of all 3.....but when I started the phone up it got stuck on a boot loop on the Cyanogen animation. No big deal....I'll just flash it again. Go into recovery mode.....wipe the data/cache.....it freezes on the cache. Try to flash the rom, cWM , the old rom, anything.......it gets stuck on the first "Installing....." . Not good. Can't do anything in CWM.
So I read a million webpages trying to figure out what to do next......someone else had to have had this problem. Seems like my only option is to go through Odin and flash it there. I make sure I get the USB drivers from Samsung and install those first. The installation goes through no problem......I reboot....and then try to plug in my phone via Download Mode. I make sure I use the USB cable that came with my phone and use a powered port on the back of my computer (XP btw). Windows recognizes it with its usual bull**** fanfare of 3 different notifications......"Found New Hardware!" then it says Found! "MSM8x60" then it says Windows failed to fully install new hardware. In the Device Manager its shown as the "Samsung Mobile USB CDC Composite Device" with the dreaded yellow exclamation mark on it. I tried uninstalling the drivers....rebooting.....and then reinstalling. No luck. Tried an older driver package.....no luck. I've spent hours trying every combination with no luck. I can't get Windows to recognize it....or more importantly.....Odin to recognize it. Any thoughts? Thanks.
Sorry for my English.
A lot of different things can happen if you are not using the correct version of recovery. The latest recovery doesn't always mean it will flash properly. For example I had to use TWRP 2.6 for 4.3 based ROM and had to roll back to TWRP 2.5 for some other versions of a rom. I don't know which version of CM you are using but maybe try TWRP or another version of CM.
Sent from my SGH-T989D using Tapatalk
Yeah....that makes sense. But how do I flash a different version of CWM? I can't get the phone detected by Odin.
Resolved.....tried a couple of other PCs....found one that worked
Hey Guys.
I have had HTC devices all my life, but this one has caused me nothing put problems. I bought one from Walmart as the pay-as-you-go from Virgin mobile for my daughter. She has since gotten an iPhone and I tried my hand at rooting, which went fine, but installing a ROM won't take. I know I need to flash the boot .img after I install the ROM, but my desktop (running Windows 7), nor my laptop (Windows 8) will recognize this device. I have searched high & low for the drivers, but I am not sure if the ones I am installing are definitively for the One V.
Installing HTC Sync did nothing, I can boot into TWRP but I can't get adb to recognize it. Is there any other way to restore it, either to factory or a workable ROM? I wanna give it to my mother-in-law, but it won't boot past the red development only writing.
I have done everything to my HTC One w/o issues, but this device is a PITA!!
Any ideas?
Thx.
I finally got it to boot fastbootusb, but nothing will flash via cmd prompt. I keep getting "command write failed, unknown error".
I have never had this happen before. I even tried grabbing the stock recovery from the RUU and it still wont flash. Could my HBOOT be too old or something?
BCH/HTC said:
I finally got it to boot fastbootusb, but nothing will flash via cmd prompt. I keep getting "command write failed, unknown error".
I have never had this happen before. I even tried grabbing the stock recovery from the RUU and it still wont flash. Could my HBOOT be too old or something?
Click to expand...
Click to collapse
Fastboot files?
CZNexus said:
Fastboot files?
Click to expand...
Click to collapse
No...It shows up under adb devices.
I did finally get it to boot though. I knew there was already a boot image from before, it was just a matter of finding which ROM it belonged too. After a few hours of flashing ROMs, I found the one.
I still don't understand it though. I wanted to flash the 4.4 Kitkat ROM, but it won't take. It sux.
BCH/HTC said:
No...It shows up under adb devices.
I did finally get it to boot though. I knew there was already a boot image from before, it was just a matter of finding which ROM it belonged too. After a few hours of flashing ROMs, I found the one.
I still don't understand it though. I wanted to flash the 4.4 Kitkat ROM, but it won't take. It sux.
Click to expand...
Click to collapse
Glad you can solve your prob
Sent from my GT-S7270 using Tapatalk
Hello guys,
I had my Nexus 7 2013 (Wi-fi) for almost an year running stock rom and I decided to install CM12+ElementalX. It was all good untill yesterday when I returned it back to stock 5.0.2. When i started the tablet a message popped about 5.1 update and I started the update, but in the middle of the process it said "ERROR". I rebooted the device and now its stuck on the screen where you have to choose your language, with two errors constantly popping up - "PHONE HAS STOPPED WORKING" and "NFC Service has stopped working". I press OK like mad trying to skip some of the steps,but the "touch and go" (i think thats the name) is as far as i can go.
Is there any way I can flash the stock 5.1 without USB Debug Mode. There is no way i can get in the tablet's menu. I also saw some of the othere topics with this kind of problems, but i didn't find the answer.
You don't need USB Debugging to flash the factory images... use fastboot.
Telyx said:
You don't need USB Debugging to flash the factory images... use fastboot.
Click to expand...
Click to collapse
Can you please explain with few steps. I tried everything and i don't know what am I missing
P.s. I dont have custom recovery and i cant turn debug mode on
Ramirezz27 said:
Can you please explain with few steps. I tried everything and i don't know what am I missing
P.s. I dont have custom recovery and i cant turn debug mode on
Click to expand...
Click to collapse
I have installed ADB i Android SDK. Everythink is working fine on my Nexus 5 , but i cant do anything with my Nexus 7 which is now constantly rebooting after i managed to go through all the starting steps , when it started to install my 36 apps it rebooted by itself and now it keeps doing it.
i am having similar issue. i have tried the root tool several times with no success. ive been rooting devices since the samsung moment and i cannot get this tablet going at all. with the root tool i am able to flash twrp recovery, but for some reason it will not mount to put a rom on the internal memory. i have even tried pushing a stock rooted rom through adb fastboot and it just hangs. what else can i possibly do? could it be hardware related? this all happened after i was prompted for the latest 5.1.1 update. any tips or suggestions would be greatly appreciated. tia
Hello everybody,
i hope the xdadevs can help me with my problem.
Since two Days i try to recover my Nexus 7 form a bootloop.
A week ago i flashed Kali Nethunter 2.0 via TWRP on my Device (Nexus 7 2003 Wifi) - Everything worked fine till yesterday.
My device run out of energy so i loaded it and startet it shortly after that.
Then i regognized the bootloop. I tried to restart the device but it had no effect.
After that i tried to boot into the Recovery Mode with TWRP to restore my working backup. But it got stucked on the loading screen of TWRP too.
Now i tried to recover some images and fix the problem with some manuals which seemed promising. - no success
After a while i did something incredible stupid and locked my bootloader again (i wanted to try to lock and unlock it since some tools couldnt flash the stock rom).
The situation right now:
I cant boot up normaly: Stuck while "Google" is displayed
I cant boot in Recovery Mode (TWRP): Stuck on the blue TWRP Logo
If i try to use the Skipsoft Toolkit or something else it fails - or do i miss something
Recover the Stock rom by using the "flash-all.bat" fails because of this (pastebin. c0m/ie0dBv1D). I used the stock rom of Android 4.4.4(razor-ktu84p) because every other stockrom says this (pastebin. c0m/Dz31k8qu).
I wonder why the stock rom needs to get the bootloader unlocked... ive red so much about it that it just works out of the box..... am i doing something wrong ?
If i try to unlock again, the selection screen on the tablet shows up. I choose yes and hit the Power button. At the console the output <bootloader> erasing userdata" shows up and "freezes?!"... nothing happens afterwards.
Thats about it and this is where i am stuck. I would really appreciate if someone could help me ! I would even reward or spend some money on help.
I try to fix it meanwhile and update this post if something new happens.
I had to alternate the links because im a new member, im sorry for that !
Thanks in advanced and sorry for the spelling
did you try the nexus root toolkit ?
war your PC detecting (USB) the Nexus prior to this problem?
diehard2013 said:
did you try the nexus root toolkit ?
war your PC detecting (USB) the Nexus prior to this problem?
Click to expand...
Click to collapse
Yeah i tried it but it couldnt fix my problems. Returning to Stock Rom will always tell me that i need the bootloader unlocked... and i cant unlock it.
My PC and Linux Notebook where recognizing before it was bricked. Now it only gets detected in fastboot because it wont start anymore.
Hi all,
i hope to find here some help on how to get Lineage OS on to my Samsung SM-P605. I´m trying now since two days to get it flashed without any luck and i read already a million threads and watched thousands of youtube videos without any luck.
I have a freshly installed Win10 Laptop from where I´m trying to flash my Tablet. The main issue is that i´m not even able to get twrp running on it.
I installed ADB and fastboot on the laptop (wiki.lineageos.org/adb_fastboot_guide.html)
Downloaded the twrp from here (twrp.me/samsung/samsunggalaxynote1012014qcom.html)
Installed also the latest Version of Odin3 v3.12 on the laptop.
When using Odin:
It says that flashing was "passed" but after shutting down the device and restarting with Home + Volume Down + Power. I still get this:
imgur.com/1dIs5eZ
imgur.com/MjstaYz
I tried following versions of twrp:
twrp-3.1.1-0-lt03ltexx.img.tar
twrp-3.0.2-0-lt03ltexx.img.tar
twrp-2.8.7.0-lt03ltexx-4.4.img
When using Fastboot:
Tablet is powered up and connected via USB to the laptop
Using the command "adb reboot bootloader" works fine. Device reboots and goes in "download mode"
After this the device is not reachable anymore command "adb devices" shows nothing connected.
command "fastboot flash recovery twrp_xxxxx.img" only says waiting for device.
Interesting here when starting Odin it recognizes the device.
I followed these instructions:
cyanogenmods.org/forums/topic/install-twrp-recovery-android-using-fastboot/
Does anyone know what i´m doing wrong? USB debugging is activated.
I also tried several drivers i found on the internet but no game changer here.
Any help is really appreciated.
joselitoo said:
Hi all,
i hope to find here some help on how to get Lineage OS on to my Samsung SM-P605. I´m trying now since two days to get it flashed without any luck and i read already a million threads and watched thousands of youtube videos without any luck.
I have a freshly installed Win10 Laptop from where I´m trying to flash my Tablet. The main issue is that i´m not even able to get twrp running on it.
I installed ADB and fastboot on the laptop (wiki.lineageos.org/adb_fastboot_guide.html)
Downloaded the twrp from here (twrp.me/samsung/samsunggalaxynote1012014qcom.html)
Installed also the latest Version of Odin3 v3.12 on the laptop.
When using Odin:
It says that flashing was "passed" but after shutting down the device and restarting with Home + Volume Down + Power. I still get this:
imgur.com/1dIs5eZ
imgur.com/MjstaYz
I tried following versions of twrp:
twrp-3.1.1-0-lt03ltexx.img.tar
twrp-3.0.2-0-lt03ltexx.img.tar
twrp-2.8.7.0-lt03ltexx-4.4.img
When using Fastboot:
Tablet is powered up and connected via USB to the laptop
Using the command "adb reboot bootloader" works fine. Device reboots and goes in "download mode"
After this the device is not reachable anymore command "adb devices" shows nothing connected.
command "fastboot flash recovery twrp_xxxxx.img" only says waiting for device.
Interesting here when starting Odin it recognizes the device.
I followed these instructions:
cyanogenmods.org/forums/topic/install-twrp-recovery-android-using-fastboot/
Does anyone know what i´m doing wrong? USB debugging is activated.
I also tried several drivers i found on the internet but no game changer here.
Any help is really appreciated.
Click to expand...
Click to collapse
Hi, First you have to install Samsung Firmware 5.1.1 with ODIN . After that installation of TWRP 2.8..... with Odin. Did it just yesterday.
Archigo said:
Hi, First you have to install Samsung Firmware 5.1.1 with ODIN . After that installation of TWRP 2.8..... with Odin. Did it just yesterday.
Click to expand...
Click to collapse
I have Firmware 5.1.1 already installed. Which version of Odin are you using? Which TWRP file did you use? There are quite a lot 2.8 ones.
joselitoo said:
I have Firmware 5.1.1 already installed. Which version of Odin are you using? Which TWRP file did you use? There are quite a lot 2.8 ones.
Click to expand...
Click to collapse
I´ve got the same issue, and now I took the twrp-2.8.7.0-lt03ltexx-4.4.img.tar and it worked. , btw, only this worked for me. nothing else I´ve tried.
But it is a hassle with this Samsung Note... I needed several boots to come into the twrp recovery.