Hello,
Here´s the problem.
I have here a HTC One X, engineer model. (fully factory unlocked)
The problem is that he has 2.17.401.2 and works OK. But can´t upgrade to any version above.
As he came:
Bootloader Unlocked
Model : ENDEAVORU XC Ship S-Off RH
CID : HTC__001
Hboot - 1.12.0000
CPLD - None
MICROP - None
Radio -
eMMC-bootmode : disabled
CPU-bootmode : disabled
HW Secure boot : disabled
Modem PATH : Off
Tried to update by RUU to 3.14.401.31 (I believe it´s the latest official), but an error came along about image error.
So I manually, updated the HBoot to 1.39.0000, and the RUU update now get´s complete, but the phone restart few seconds after power on. And recovery get´s the same restart cycle.
So, I update to RUU 2.17.401.2 and everything works again.
Changed the CID to 1111111 (supercid)
Flashed again the 3.14 and now he is at this point:
Code:
C:\Fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.162.29
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.401.31
INFOserialno: HT21LWxxxxx
INFOimei: 35918xxxxxxxx
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3873mV
INFOdevpower: 60
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Code:
C:\Fastboot>fastboot getvar version-main
version-main: 2.17.401.2
But at any time, I can downgrade to 2.17 or 1.29 and make it work.
BTW, I also tried other methods... when on 2.17, tried to update by CWM with zip file. Relocked the bootloader, unlocked it again... Tried to restore a nandroid backup from a 3.14.** working unit... but all ended in a restart loop. So always came back to 2.17 and get it working.
I think the problem in this unit remains here:
Code:
INFOmodelid: PJ461****
Should be PJ46100... or PJ4610000
If I try to write it on fastboot
Code:
fastboot oem writemid PJ46100
Command error !!!
Not sure if write model ID is supported on this unit.
Any way of writting the model id? or solve the main issue of not updating to 3.14?
Thank you
The model id was fine, what is the name of the files are you trying to flash and what command you used ?
Vcek said:
The model id was fine, what is the name of the files are you trying to flash and what command you used ?
Click to expand...
Click to collapse
Tried a bunch... RUU 3.14.401.27 / 3.14.401.31, tried install zip by cwm (ROM_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31.zip), tried a nandroid backup form a 3.14.401.31 working unit...
Also tried ota update (OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27-2.17.401.2_release_298985n1wwcwzs385c0bvz.zip) by adb... but no sucess.
fastboot oem rebootRUU
fastboot flash zip (ota_file).zip
Came an error saying it android-info.txt file was not found
I´m running out of options...
Thanks
I´m kind in a dead end...
Phone works on all ICS, but if update hboot, and install JB, reboot loop... always, no matter what I do.
Drug_Store said:
I´m kind in a dead end...
Phone works on all ICS, but if update hboot, and install JB, reboot loop... always, no matter what I do.
Click to expand...
Click to collapse
Try twrp to install the rom, or cwm 5.8.4.0
Sent from my HTC One X using xda app-developers app
Vcek said:
Try twrp to install the rom, or cwm 5.8.4.0
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Tried CMW to install zip... flashed, but same result... reboot loop.
Tried to restore a twrp backup from 3.14.401.31, but always end up like this.
why dont you just go back to stock and update through OTA?
robchongke said:
why dont you just go back to stock and update through OTA?
Click to expand...
Click to collapse
If I go back to 2.17, there´s no OTA notify of newer update.
Only if I go to 1.29, then I receive 2.17 OTA notify, install it... but after that no more ota notify.
I am not sure for engineer version, but did you try to do steps like for "normal" One x when you do RUU flash! Need to lock bootloader and in win based systems with administrator control run RUU as administrator, and with phone in fastoboot mode.. I know that's you phone have unlock bootloader and S-Off but try..
And for use of nandroid backup that you mention did you try after flashing backup flash boot.img also..
link to firmware for your CID : http://forum.xda-developers.com/showthread.php?t=1957376, and link for CID match software:http://forum.xda-developers.com/showthread.php?t=2189048
Mis-read, delete please.
hpnxfox said:
I am not sure for engineer version, but did you try to do steps like for "normal" One x when you do RUU flash! Need to lock bootloader and in win based systems with administrator control run RUU as administrator, and with phone in fastoboot mode.. I know that's you phone have unlock bootloader and S-Off but try..
And for use of nandroid backup that you mention did you try after flashing backup flash boot.img also..
link to firmware for your CID : http://forum.xda-developers.com/showthread.php?t=1957376, and link for CID match software:http://forum.xda-developers.com/showthread.php?t=2189048
Click to expand...
Click to collapse
Already tried to flash RUU as Admin, and bootloader locked. But ended up the same... reboot loop.
Can´t recall for sure about flashing boot.img after nandroid backup, but will retry.
Thank you
Same Problem
Drug_Store said:
Already tried to flash RUU as Admin, and bootloader locked. But ended up the same... reboot loop.
Can´t recall for sure about flashing boot.img after nandroid backup, but will retry.
Thank you
Click to expand...
Click to collapse
Hi Drug_Store,
I have same problem. not able to upgrade to JB.
hboot 1.12. Super CID. S-Off. Ver: 2.17.401.2.
Tried all possible things. still no use., boot loop.
Are you able to flash any JB rom apart from RD-MIUI?
http://forum.xda-developers.com/showthread.php?t=1817633
Super CID, not able to upgrade to JB
mods, any inputs on the above?
Having the same issue
I'm having the same issue.
My phone is currently at RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900
but if I try to update it with RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
OTA will download the file fine and wipe the phone, then in the recovery menu (stock) it will reboot after 10 seconds of "installing".
All other RUU's or manual flashes fail and end up in a boot loop.
try to set another CID which is for exmaple from WWE so that it will download for sure the update...maybe it's due to supercid
Didnt work
One-X-master said:
try to set another CID which is for exmaple from WWE so that it will download for sure the update...maybe it's due to supercid
Click to expand...
Click to collapse
Changed cid to HTC__001 & checked with bootloader locked & unlocked. no update available.
vnayrox said:
Changed cid to HTC__001 & checked with bootloader locked & unlocked. no update available.
Click to expand...
Click to collapse
Try factory reset the phone with cid at HTC_001 and try update again
wigankev said:
Try factory reset the phone with cid at HTC_001 and try update again
Click to expand...
Click to collapse
Yup try that should work ...I just deleted cache and data in all Google things and HTC update thing restarted phone and searched again for and found one...and factory reset should work really, too...
Gesendet von meinem HTC One X mit Tapatalk 2
One-X-master said:
Yup try that should work ...I just deleted cache and data in all Google things and HTC update thing restarted phone and searched again for and found one...and factory reset should work really, too...
Gesendet von meinem HTC One X mit Tapatalk 2
Click to expand...
Click to collapse
Did factory reset via recovery with cid HTC__001, found no updates
vnayrox said:
Did factory reset via recovery with cid HTC__001, found no updates
Click to expand...
Click to collapse
As long as your on the right Hboot you should be ok flashing ARHD or any other Jelly Bean custom rom of your choice.
Related
Hi Everyone,
I have become slightly frustrated as I seem to be unable to flash the stock rom back onto my HTC One X. I have a CID of HTC__001 which seems to be perfect and I am with Orange Uk. I have downloaded the correct RUU for the specific radio I have (2.1204.135.20) and when I run the exe in windows. It starts to work and then says my USB is not connected.
Previously I have been rooted and have flashed the recovery image, which does mean I am connected via use and in fastboot mode. Not sure what is causing this issue. If anyone could provide any assistance that would be fantastic.
Thanks
Andy
Andy,
Ruus need stock recovery. Are you back on stock recovery? Also, phone must be booted up into rom and respond to adb commands such as
Adb devices
This should list your devices serial number as connected. If you see that, then try running the ruu.
Sent from my HTC One X using xda premium
1. If you have HTC__001 then download the 2.17.401.2 RUU from here - http://d-h.st/HoB
2. Relock your bootloader!!
3. Boot the phone into fastboot and connect to the PC
4. Run the RUU
That's it, no stock recovery required
Thanks
Thanks for both of your replies. I have since managed to install the sense jelly bean roms from Insert Coin and also Maximum, realised that I did not need to install the RUU, just need to flash the boot.img. All is now great. The RUU that you posted was the one i tried but failed :s Its ok now though as now I am unable to return to ICS roms
EddyOS said:
1. If you have HTC__001 then download the 2.17.401.2 RUU from here - http://d-h.st/HoB
2. Relock your bootloader!!
3. Boot the phone into fastboot and connect to the PC
4. Run the RUU
That's it, no stock recovery required
Click to expand...
Click to collapse
Hello
Im on the same situation, but i cant get the RUU to install. I flashed the stock recovery, i relock the bootloader, but im always getting Error 155 Im with full batery, i run as administrator but i cant get thr RUU to flash. Any idea? Thanks in advance:fingers-crossed:
DropePT said:
Hello
Im on the same situation, but i cant get the RUU to install. I flashed the stock recovery, i relock the bootloader, but im always getting Error 155 Im with full batery, i run as administrator but i cant get thr RUU to flash. Any idea? Thanks in advance:fingers-crossed:
Click to expand...
Click to collapse
How far does the RUU installer get? I had problems on the weekend where it got to the install shield then stopped. This was resolved by turning off norton and running as administrator.
shadwell_lad said:
How far does the RUU installer get? I had problems on the weekend where it got to the install shield then stopped. This was resolved by turning off norton and running as administrator.
Click to expand...
Click to collapse
I only get into the black screen with HTC logo:silly: I have Microsoft Security Essentials, already flashed RUU without problems, this was the 1st time. Meanwhile, flashed now with football rom, Revolution without any problems. Just wonder if when OTA will be available, if i can install it
thanks so much guys, this helped me a lot!
Help needed!
Hi guys. I'm very new to this so forgive me if I seem a bit stupid at times. I've been reading a lot and trying to learn things about the phone but I've got myself a bit stuck.
I have a HOX with the following;
*** relocked ***
CID HTC__001
Hboot 1.12.0000
radio-2.1204.135.20
Everything was stock, I unlocked and rooted. All went well, everything worked fine. Didn't install any ROM's. Installed CWM. Then JB was released so I unrooted and relocked and flashed stock recovery.
The phone now has;
Android 4.0.4
HTC Sense 4.1
Software 2.17.401.2
API 4.23
HTC Extension 403_1_GA_20
Everything works. I can boot the phone and everything works as it should. The only issue I can see is that it won't boot into recovery. I get the green arrows, press power and up volume, some errors are reported on the screen - Cannot find /cache/recovery/command and Failed to open loopdevice, no such file or directory. The phone then restarts and boots the OS.
My question is, what should I do next to be able to receive the OTA JB update? I assume I'll need to do some combination of flashing the boot.img and recovery.img but I'm unsure what the process is, or even if my assumptions are correct? Help??
EDIT 1 : I found this. http://forum.xda-developers.com/showthread.php?t=1193540
I think it's what I need. I just need to read some more and find out what ROM I need to download. Can anyone advise if this is in fact what I need to do and what ROM I should be looking for?
EDIT 2 : I also found this RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed.exe
Can anyone confirm for me this is the process and the ROM I need to return to stock before I go ahead and run this?
In advance, thank you for any help/advice that's offered.
The RUU should work.
That guide is for a different phone. Check the stickies in the dev section of this forum.
BenPope said:
The RUU should work.
That guide is for a different phone. Check the stickies in the dev section of this forum.
Click to expand...
Click to collapse
Thanks for the reply BenPope. Yea, I saw the guide was for a different device, but the steps are virtually identical. I went ahead and ran the RUU. Everything flashed OK, no errors, no issues. Re-locked the bootloader. Still can't run recovery tho. Still getting the same errors. As I understand it I won't be able to get OTA updates installed if Recovery isn't working correctly. Have I got this right? Any ideas?
You're saying everything in the wrong order. Please be more clear.
To run the RUU, your hboot needs to be locked. If after the RUU you can't access recovery something went wrong and the RUU failed. What errors are you getting?
g12__ said:
EDIT 2 : I also found this RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed.exe
Can anyone confirm for me this is the process and the ROM I need to return to stock before I go ahead and run this?
In advance, thank you for any help/advice that's offered.
Click to expand...
Click to collapse
Take boot_signed.img and recovery_signed and Rom.zip from the RUU. Boot to fastboot, flash boot_signed.img and recovery.img . Boot to recovery and flash the rom.zip.
Sent from my HTC One X using xda premium
Your problem was due to flashing stock recovery AFTER relock.
Try this:
1. Unlock again.
2. Fastboot flash stock recovery.
3. Then, relock.
4. Boot your phone.
Try to update then.
Sent from my HTC One X using XDA Premium HD app
EddyOS said:
1. If you have HTC__001 then download the 2.17.401.2 RUU from here - http://d-h.st/HoB
2. Relock your bootloader!!
3. Boot the phone into fastboot and connect to the PC
4. Run the RUU
That's it, no stock recovery required
Click to expand...
Click to collapse
is this RUU same for cid_032????????????????
yode said:
is this RUU same for cid_032????????????????
Click to expand...
Click to collapse
2.17.401.2 RUU is for :
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__203
cidnum: HTC__102
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__A07
cidnum: HTC__304
cidnum: HTC__M27
cidnum: HTC__032
cidnum: HTC__016
cidnum: HTC__J15
I have a stupid question.
I've flashed my device with the official European JB RUU 3.14.401.27 (if i'm correct).
I've relocked my bootloader etc, and RUU update is done.
But the bootloader said it's **RELOCKED**.
Is there a way to remove that text without SuperCID?
And will it be a problem to send my device back to HTC repair center? (for the G-sensor.. )
Thanks in advance!
****head said:
I have a stupid question.
I've flashed my device with the official European JB RUU 3.14.401.27 (if i'm correct).
I've relocked my bootloader etc, and RUU update is done.
But the bootloader said it's **RELOCKED**.
Is there a way to remove that text without SuperCID?
And will it be a problem to send my device back to HTC repair center? (for the G-sensor.. )
Thanks in advance!
Click to expand...
Click to collapse
It's impossible to change or remove that text .
You will have to pay for repair unless you are extremely lucky.
Sent from my HTC One X
TToivanen said:
It's impossible to change or remove that text .
You will have to pay for repair unless you are extremely lucky.
Sent from my HTC One X
Click to expand...
Click to collapse
sigh ....
thanks for the info.
do you know how much they will ask for the repair?
****head said:
do you know how much they will ask for the repair?
Click to expand...
Click to collapse
No but there is a slight chance it could be covered by warranty since it is a hardware fault. Sorry for your loss man.
Sent from my HTC One X
I'm trying to revive my WFS which i think is softbrick (stuck at htc logo)
I can access the bootloader and fastboot but not adb
I've tried all the all the tutorial here but none seem to work
Please help!:crying:
phone spec
marvel pvt ship s-on rl
hboot - 0.90.000
microp - 0451
radio - 7.46.35.08
Apr 8 2011, 17:45:10
main version 11.33.401.22
cidnum htc_044
p0pc0m said:
I'm trying to revive my WFS which i think is softbrick (stuck at htc logo)
I can access the bootloader and fastboot but not adb
I've tried all the all the tutorial here but none seem to work
Please help!:crying:
phone spec
marvel pvt ship s-on rl
hboot - 0.90.000
microp - 0451
radio - 7.46.35.08
Apr 8 2011, 17:45:10
Click to expand...
Click to collapse
your phone is not rooted i think.
remove battery.
insert battery again.
press volume down + power button
and you will see hboot menu.
try to factory reset your phone.
root? or unlock first?
do i need to root it before i unlock it?
i already did "clear storage" but it didn't work
i want to return at least to stock rom
p0pc0m said:
do i need to root it before i unlock it?
i already did "clear storage" but it didn't work
i want to return at least to stock rom
Click to expand...
Click to collapse
first thing you need unlocked bootloader to flash anything like recovery and all..
after unlocking bootloader u can flash roms and all & also root ur phone..
since if never root your phone..stock rom still in ur phone..nothing changed.
so you just need to factory reset via hboot menu..
if you wana root your phone..
unlock bootloader via htcdev and use htcsupertool..
then you can flash cwm recovery via hboot and also then you can flash stock rom too..if your phn still stuck at htc logo..
and also if u nvr root phn u cn directly go to service center they cn flash stock rom easily and that ll solve ur prob fast
Sent from my Wildfire S A510e using Tapatalk 2
crossfire77 said:
first thing you need unlocked bootloader to flash anything like recovery and all..
after unlocking bootloader u can flash roms and all & also root ur phone..
since if never root your phone..stock rom still in ur phone..nothing changed.
so you just need to factory reset via hboot menu..
if you wana root your phone..
unlock bootloader via htcdev and use htcsupertool..
then you can flash cwm recovery via hboot and also then you can flash stock rom too..if your phn still stuck at htc logo..
and also if u nvr root phn u cn directly go to service center they cn flash stock rom easily and that ll solve ur prob fast
Sent from my Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the advice.
I tried unlocking it using htcdev but it didnt work
Europe RUU works but it did not update the hboot
Other RUU gives me "Error 191"
Proceed to getting the token but it gives me a command error
p0pc0m said:
Thanks for the advice.
I tried unlocking it using htcdev but it didnt work
Europe RUU works but it did not update the hboot
Other RUU gives me "Error 191"
Proceed to getting the token but it gives me a command error
Click to expand...
Click to collapse
hmm what is ur software version 2.13 or 2.26 because in htcdev if you have 2.13 you have to download file or if 2.26 you dont have to.
and second without unlocking bootloader ruu won't work.
if you have unlocked bootloader+cwm recovery then you can flash any ruu.
crossfire77 said:
hmm what is ur software version 2.13 or 2.26 because in htcdev if you have 2.13 you have to download file or if 2.26 you dont have to.
and second without unlocking bootloader ruu won't work.
if you have unlocked bootloader+cwm recovery then you can flash any ruu.
Click to expand...
Click to collapse
how do you know your software version? i can't boot my device, it's stuck at htc logo
this is what appear at 'fastboot getvar all'
version: 0.5
version-bootloader: 0.90.0000
version-baseband: 7.46.35.08
version-cpld: None
version-microp: 0451
version-main: 11.33.401.2
serialno: HT14KTR01305
imei: 358225047104741
product: marvel
platform: HBOOT-7227
modelid: PG7610000
cidnum: HTC__044
battery-status: good
battery-voltage: 3895mV
partition-layout: HTC
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-720d6ffc
hbootpreupdate: 12
gencheckpt: 0
p0pc0m said:
how do you know your software version? i can't boot my device, it's stuck at htc logo
this is what appear at 'fastboot getvar all'
version: 0.5
version-bootloader: 0.90.0000
version-baseband: 7.46.35.08
version-cpld: None
version-microp: 0451
version-main: 11.33.401.2
serialno: HT14KTR01305
imei: 358225047104741
product: marvel
platform: HBOOT-7227
modelid: PG7610000
cidnum: HTC__044
battery-status: good
battery-voltage: 3895mV
partition-layout: HTC
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-720d6ffc
hbootpreupdate: 12
gencheckpt: 0
Click to expand...
Click to collapse
do you have marvel or marvelc?
and software no is under settings>about phone>software information
and see software number.
and yeah try this link.this might help you.you can here root without htcdev help.
http://forum.xda-developers.com/showthread.php?t=1809751
seem like nothing works
crossfire77 said:
do you have marvel or marvelc?
and software no is under settings>about phone>software information
and see software number.
and yeah try this link.this might help you.you can here root without htcdev help.
http://forum.xda-developers.com/showthread.php?t=1809751
Click to expand...
Click to collapse
so after days of searching and trying i still cant revive my wfs
so far what i've done
> download and tried different ruu from shippedroms > gives me error 131
> i tried the wfs all in one toolkit > when i try to get token id i get a command error
> ruu from htcdev gives me an error 191
> when i try to flash images (hboot, system, recovery) > give a checksum or something like that error
^^ i think this because im not rooted or boot loader unlocked
i haven't tried creating a gold card using it and that would be my next step
my question is can i try making it using another phone (a xperia x10 mini)?
or do i need another wfs?
p0pc0m said:
so after days of searching and trying i still cant revive my wfs
so far what i've done
> download and tried different ruu from shippedroms > gives me error 131
> i tried the wfs all in one toolkit > when i try to get token id i get a command error
> ruu from htcdev gives me an error 191
> when i try to flash images (hboot, system, recovery) > give a checksum or something like that error
^^ i think this because im not rooted or boot loader unlocked
i haven't tried creating a gold card using it and that would be my next step
my question is can i try making it using another phone (a xperia x10 mini)?
or do i need another wfs?
Click to expand...
Click to collapse
With goldcard you can flash any ruu but still im confused about your phone version.
Its marvel(GSM) OR marvelc(CDMA)?
But for using goldcard you need two things:
Bootloader unlocked
Cwm recovery
Sent from my HTC Wildfire S A510e using Tapatalk 2
crossfire77 said:
With goldcard you can flash any ruu but still im confused about your phone version.
Its marvel(GSM) OR marvelc(CDMA)?
But for using goldcard you need two things:
Bootloader unlocked
Cwm recovery
Sent from my HTC Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
its gsm sorry i forgot to tell that earlier
the other phone (x10mini) that i'll use to create goldcard is both bootloader unlocked and and has cwm
but its a SE not HTC, can i use that goldcard for wfs?
p0pc0m said:
its gsm sorry i forgot to tell that earlier
the other phone (x10mini) that i'll use to create goldcard is both bootloader unlocked and and has cwm
but its a SE not HTC, can i use that goldcard for wfs?
Click to expand...
Click to collapse
You need your com to create a goldcard I think.
Sent from my HTC Sensation 4G using xda app-developers app
p0pc0m said:
its gsm sorry i forgot to tell that earlier
the other phone (x10mini) that i'll use to create goldcard is both bootloader unlocked and and has cwm
but its a SE not HTC, can i use that goldcard for wfs?
Click to expand...
Click to collapse
Nopes..sony and htc are different.if you want to create goldcard you need your phone ,sdcard and computer.
Because sdcard uses as copy CID.and you cnt use x10 mini goldcard.
But still you needs unlocked bootloader and cwm recovery to use bl-tool..then you can flash any ruu..
Dnt compare both phone.they are different..
First you need to unlocked ur phone..goldcard and all things comes later if you your phone is bricked and you need stock rom,update radio etc.
EDIT:
first of all you need to root your phone,your bootloader is not updated so you need to update is via htcdev.and then root it.still htcdev not working.i have no idea how to unlock it.
Sent from my HTC Wildfire S A510e using Tapatalk 2
You just want to run stock ROM?? If yes go to service center they will do it for you..
Hello all.
A friend of mine has recently asked me for advice about how to RMA his phone due to some serious hardware fault (WiFi network not functioning and lower screen buttons not responding from time to time). It is a second-hand phone, and he has boot unlocked and cyanogenmod installed in it.
I have read that, among the conditions to get a successful RMA from HTC, it is needed to send the phone with the boot locked and an original RUU installed on it.
I have get both the CID and RUU needed through the fastboot command prompt and I would need to find the RUU to match these parameters:
RUU: 3.18.401.1
CID: HTC_203
I can only find either the RUU 3.18.401.1 but for different CIDs, or an older RUU (3.14) matching the area code (401) and CID (HTC_203). I have also read that one cannot flash an older RUU on the phone. Will it brick it?
I have to choose to flash one of this RUUs:
3.18.401.1 CID HTC__032
3.18.401.1 CID HTC__001
3.18.401.1 CID HTC__E11
3.18.401.1 CID HTC__405
Neither of them matches the CID on the phone.
3.14.401.31 CID HTC__203
Or this. This is the newest RUU matching the CID, but is it older than the one originally flashed on the phone.
Could I get any help?
Thanks so much in advance!
PD: Sorry for my English.
You can't run a RUU because there's no ruu for 3.18.401.1 base... You will need to restore this backup:
http://d-h.st/hFn
This is for HTC__E11 but it will work if the base is the same!
PS: Take a backup of the current rom or have a rom.zip in your phone so that if anything goes wrong, you can flash that!
vin4yak said:
You can't run a RUU because there's no ruu for 3.18.401.1 base... You will need to restore this backup:
This is for HTC__E11 but it will work if the base is the same!
PS: Take a backup of the current rom or have a rom.zip in your phone so that if anything goes wrong, you can flash that!
Click to expand...
Click to collapse
Thanks so much for the help! Much appreciated!
I will do it as soon as possible
jfromeo said:
Thanks so much for the help! Much appreciated!
I will do it as soon as possible
Click to expand...
Click to collapse
So, I have extracted the recovery.img and flashed it with:
"fastboot flash recovery recovery.img"
Then relocked the bootloader with:
"fastboot oem lock"
But when I was going to flash the RUU following the tutorial, I have realised that it is not in exe mode, it is a rar and I cannot "right click -> run as administrator" as the tutorial says.
Is there any way I can flash the original RUU to the phone in fastboot mode? Or an alternative RUU X.XX.401.X in exe format?
jfromeo said:
So, I have extracted the recovery.img and flashed it with:
"fastboot flash recovery recovery.img"
Then relocked the bootloader with:
"fastboot oem lock"
But when I was going to flash the RUU following the tutorial, I have realised that it is not in exe mode, it is a rar and I cannot "right click -> run as administrator" as the tutorial says.
Is there any way I can flash the original RUU to the phone in fastboot mode? Or an alternative RUU X.XX.401.X in exe format?
Click to expand...
Click to collapse
That's not a RUU, it's a nandroid backup!
You need to unlock your bootloader, flash this recovery : https://www.dropbox.com/s/p35p0tqf41jbj8b/recovery.img
Then transfer the all the 'files' to /clockworkmod/backup/04-06-2013/. Copy the boot.img to fastboot folder.
flash the boot.img and then go to recovery and wipe everything and then restore the backup!
jfromeo said:
So, I have extracted the recovery.img and flashed it with:
"fastboot flash recovery recovery.img"
Then relocked the bootloader with:
"fastboot oem lock"
But when I was going to flash the RUU following the tutorial, I have realised that it is not in exe mode, it is a rar and I cannot "right click -> run as administrator" as the tutorial says.
Is there any way I can flash the original RUU to the phone in fastboot mode? Or an alternative RUU X.XX.401.X in exe format?
Click to expand...
Click to collapse
if you are referring to the one vin4yak gave to you, it is a nandroid backup from another HOX not the RUU. you need to flash it via recovery.
Oh sorry, thanks for the clarification!
I will try it again as soon as I arrive home.
Spook HECDur
I have followed the above steps, but now in the bootloader, it appears a message above:
*** RELOCKED ***
And if I try to do anything, it appears a:
*** SECUTIRY WARNING ***
What could I do? I would need to send it as stock to HTC RMA, and I do not know if they could see that RELOCKED text, it could be suspicious...
I flashed the recovery.img, boot.img and restore the backup (now the phone is at stock ROM, but it is in German :S). What annoys me the most is that RELOCKED message at bootloader.
Thanks again!
jfromeo said:
I have followed the above steps, but now in the bootloader, it appears a message above:
*** RELOCKED ***
And if I try to do anything, it appears a:
*** SECUTIRY WARNING ***
What could I do? I would need to send it as stock to HTC RMA, and I do not know if they could see that RELOCKED text, it could be suspicious...
I flashed the recovery.img, boot.img and restore the backup (now the phone is at stock ROM, but it is in German :S). What annoys me the most is that RELOCKED message at bootloader.
Thanks again!
Click to expand...
Click to collapse
Did you flash the stock recovery before relocking the bootloader?
and what does your bootloader say? endeavoru or evita??
You can not change the ****relocked**** part...
vin4yak said:
Did you flash the stock recovery before relocking the bootloader?
and what does your bootloader say? endeavoru or evita??
You can not change the ****relocked**** part...
Click to expand...
Click to collapse
Oh, maybe not. I flashed the recovery.img from the dropbox link (it seems to be a modded cwm 6.X recovery), but I did not flash any other after restoring the backup.
It says Endeavoru.
May I need to unlock it again using the HTCDev method?
jfromeo said:
Oh, maybe not. I flashed the recovery.img from the dropbox link (it seems to be a modded cwm 6.X recovery), but I did not flash any other after restoring the backup.
It says Endeavoru.
May I need to unlock it again using the HTCDev method?
Click to expand...
Click to collapse
No need to do the whole process again... You must have the unlock code bin file right?
Use this to unlock your bootloader : fastboot flash unlocktoken unlock_code.bin
If you don't have your unlock code file, you will need to again get it from htcdevi...
Download this stock recovery : https://www.dropbox.com/s/xzshnnuz3jdcodv/stock recovery 3.14.img put it in your fastboot folder and then flash the recovery...
Again relock your bootloader... the security warning must go now? Try these steps and report back
vin4yak said:
No need to do the whole process again... You must have the unlock code bin file right?
Use this to unlock your bootloader : fastboot flash unlocktoken unlock_code.bin
If you don't have your unlock code file, you will need to again get it from htcdevi...
Download this stock recovery : https://www.dropbox.com/s/xzshnnuz3jdcodv/stock recovery 3.14.img put it in your fastboot folder and then flash the recovery...
Again relock your bootloader... the security warning must go now? Try these steps and report back
Click to expand...
Click to collapse
Thanks so much again.
I have followed the steps and the security warning is gone!
Unlock bootloader, flash stock recovery, lock bootloader.
But it says again ***RELOCKED***, is it normal? Could the HTC RMA deny it for this reason?
I have already changed the stock ROM to the native language.
So, the phone is right now, with recovery_stock flashed, stock ROM installed, native language, all set to default (factory reset), but bootloader "relocked", which is the only thing that would differ from a not modified one. Could it be a problem?
Thanks so much again!
jfromeo said:
Thanks so much again.
I have followed the steps and the security warning is gone!
Unlock bootloader, flash stock recovery, lock bootloader.
But it says again ***RELOCKED***, is it normal? Could the HTC RMA deny it for this reason?
I have already changed the stock ROM to the native language.
So, the phone is right now, with recovery_stock flashed, stock ROM installed, native language, all set to default (factory reset), but bootloader "relocked", which is the only thing that would differ from a not modified one. Could it be a problem?
Thanks so much again!
Click to expand...
Click to collapse
Yes, chances are always there of warranty being void with a relocked bootloader!
You have complete stock rom+recovery+bootloader locked... So you have done your best! Send it to HTC and lets hope for the best!
Do keep us posted!
Thanks again.
Could this thread work for getting a LOCKED state instead of a RELOCKED one?
http://forum.xda-developers.com/showthread.php?t=2168578
I will try the warranty claim anyway.
I hope that, given it is a hardware fault (Wifi not working from the second month) , a relocked bootloader has nothing to do.
jfromeo said:
Thanks again.
Could this thread work for getting a LOCKED state instead of a RELOCKED one?
http://forum.xda-developers.com/showthread.php?t=2168578
I will try the warranty claim anyway.
I hope that, given it is a hardware fault (Wifi not working from the second month) , a relocked bootloader has nothing to do.
Click to expand...
Click to collapse
That is for s-off phones only... There's isn't a way to edit Bootloader for S-on phones!
-Sent from my IceCold One X!
Thanks again.
I will try to RMA and let you know
jfromeo said:
Thanks again.
I will try to RMA and let you know
Click to expand...
Click to collapse
Ohkk! All the best! :good:
-Sent from my IceCold One X!
Help Needed please
version: 0.5a
version-bootloader: 1.36.0000
version-baseband: 5.1204.162.29
version-cpld: None
version-microp: None
version-main: 3.14.720.24
serialno: HT245W121191
imei: 35918XXX1XXX301
product: endeavoru
platform: HBOOT-T30S
modelid: PJ461XX00
cidnum: HTC__038
battery-status: low
battery-voltage: 2854mV
devpower: 0
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
Can Any one suggest me which Ruu should i boot for this device i have tried falsshing
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_India_1.26.720.2_Ra dio_1.1204.90.13_release_251419_signed ---> its showing 140 Boot vershion error please help me ASAP my phone is not booting into os as well please let me know thanks in advance
There is no ruu, go to the general section here and look for the stock backup collection thead. Read it.....completely......twice ..... and follow the guideline !
http://forum.xda-developers.com/showthread.php?t=1975140
Hi,
I read a few threads on XDA as well as on other forums, but none that could address my specific issue. I have an HTC ONE X which was on 4.1.1 (rooted) as it is a phone bought from HK and the seller unlocked it for use in India.
The camera was working perfectly when it was on 4.1.1 and Sense 4, however I gave it to a shop to upgrade it to 4.2.2 and Sense 5. The phone is working perfectly, only issue is that the camera does not focus at all either for close or far objects, so its completely useless. .
The guy who did it says he cannot downgrade it and i am not much experienced in Rooting etc.Attached are the screen shot of my phone's current state (of firmware/kernel) , as i read somewhere that flashing an upgraded kernel fixed a similar issue for one user on XDA.
The phone is out of warranty so cant send it back to HTC.
Also, When i boot the phone by pressing the volume down and power button the screen shows ****UNLOCKED*** at the top
Now i know that it is not expected from the members to completely guide me from a dummies perspective, but if someone can guide me towards a solution , i would be more than willing to read up stuff and learn.
Looking forward to getting support from fellow XDA members as usual
prafulk1987 said:
Hi,
I read a few threads on XDA as well as on other forums, but none that could address my specific issue. I have an HTC ONE X which was on 4.1.1 (rooted) as it is a phone bought from HK and the seller unlocked it for use in India.
The camera was working perfectly when it was on 4.1.1 and Sense 4, however I gave it to a shop to upgrade it to 4.2.2 and Sense 5. The phone is working perfectly, only issue is that the camera does not focus at all either for close or far objects, so its completely useless. .
The guy who did it says he cannot downgrade it and i am not much experienced in Rooting etc.Attached are the screen shot of my phone's current state (of firmware/kernel) , as i read somewhere that flashing an upgraded kernel fixed a similar issue for one user on XDA.
The phone is out of warranty so cant send it back to HTC.
Also, When i boot the phone by pressing the volume down and power button the screen shows ****UNLOCKED*** at the top
Now i know that it is not expected from the members to completely guide me from a dummies perspective, but if someone can guide me towards a solution , i would be more than willing to read up stuff and learn.
Looking forward to getting support from fellow XDA members as usual
Click to expand...
Click to collapse
You should first try factory reset, that could fix small problems after updating...
nikola016 said:
You should first try factory reset, that could fix small problems after updating...
Click to expand...
Click to collapse
Tried it through the OS and the Safe boot interface. .
Does Not fix the camera
I will try and install this : http://forum.xda-developers.com/showthread.php?t=2107669 using this :http://forum.xda-developers.com/showthread.php?t=2437459
Will it work on my phone, how do i check ?
prafulk1987 said:
Tried it through the OS and the Safe boot interface. .
Does Not fix the camera
I will try and install this : http://forum.xda-developers.com/showthread.php?t=2107669 using this :http://forum.xda-developers.com/showthread.php?t=2437459
Will it work on my phone, how do i check ?
Click to expand...
Click to collapse
Post fastboot getvar all result, and delete imei and serial number
nikola016 said:
Post fastboot getvar all result, and delete imei and serial number
Click to expand...
Click to collapse
Hi,
THis is what the the result gave me :
INFOversion: 0.5a
INFOversion-bootloader: 1.73.0000
INFOversion-baseband: 5.1204.167.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.708.1
INFOserialno: SH2XXXXXXXXX
INFOimei: 35342XXXXXXXXXX
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4151mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.821s
You can install any ruu since u have s-off and supercid. As I have done in my phone, you can go to http://androidruu.com/?developer=Endeavor and DL the last ruu http://androidruu.com/getdownload.p...Radio_5.1204.162.29_release_302015_signed.exe Put the phone in fastboot, make sure the phone is locked or relocked, right click on the ruu file and run it as administrator.
Edit: as per your op, phone is unlocked. You need to lock it: fastboot oem lock
Sent from my Nexus 7
prafulk1987 said:
Hi,
THis is what the the result gave me :
INFOversion: 0.5a
INFOversion-bootloader: 1.73.0000
INFOversion-baseband: 5.1204.167.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.708.1
INFOserialno: SH2XXXXXXXXX
INFOimei: 35342XXXXXXXXXX
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4151mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.821s
Click to expand...
Click to collapse
And if you want to flash recovery to install custom rom you need to flash PHILZ 5.x version, because your bootloader version is high and on any other your touch in recovery won't work.
And yeah you can instal any ruu
n1kos said:
You can install any ruu since u have s-off and supercid. As I have done in my phone, you can go to http://androidruu.com/?developer=Endeavor and DL the last ruu http://androidruu.com/getdownload.p...Radio_5.1204.162.29_release_302015_signed.exe Put the phone in fastboot, make sure the phone is locked or relocked, right click on the ruu file and run it as administrator.
Edit: as per your op, phone is unlocked. You need to lock it: fastboot oem lock
Sent from my Nexus 7
Click to expand...
Click to collapse
Hi,
So basically if I get it right :
1. Put the phone in Fast boot by pressing the power button and voulume down. .
2. Run the RUU file (.exe) as administrator . .
3. How do make sure phone is locked (or unlocked) and what is this step for ?
Is this like installing official RUU from HTC ? I just want to install/update to a different image as my camera is not working
Reboot in bootloader and it will say on top Locked or unlocked or relocked. To flash ruu phone has to be locked or relocked. Yours I think it is unlocked. You need to relock it. Check tho and see what it says.
Sent from my Nexus 7
Fastboot oem lock
Will lock it.
nikola016 said:
And if you want to flash recovery to install custom rom you need to flash PHILZ 5.x version, because your bootloader version is high and on any other your touch in recovery won't work.
And yeah you can instal any ruu
Click to expand...
Click to collapse
So if I get this right . .
1. Bootloader is already unlocked ?
2. Flash Custom Recovery with PHILZ 6x version (latest one out now)
3. Flash custom ROM. . is the one that i have selected OK ? (OneX The Next Chapter! v1.2 | 4.18.401.3| APM | EQS| WIFI FIX| SENSE 5)
4. Flash custome kernel (which comes along with the image)
Done ?
n1kos said:
Reboot in bootloader and it will say on top Locked or unlocked or relocked. To flash ruu phone has to be locked or relocked. Yours I think it is unlocked. You need to relock it. Check tho and see what it says.
Sent from my Nexus 7
Click to expand...
Click to collapse
Mine shows ***UNLOCKED** .
Mr Hofs said:
Fastboot oem lock
Will lock it.
Click to expand...
Click to collapse
Can you just clarify one thing. .loading this RUU is basically like loading an official RUU by HTC ? So for that i basically i have to lock the bootloader again ? It is a reversible process right ?
This is official ruu by HTC. It will downgrade you to 4.1.1 to see if the camera will work again. From there you will get ota to the latest version if u want.
Sent from my Nexus 7
n1kos said:
This is official ruu by HTC. It will downgrade you to 4.1.1 to see if the camera will work again. From there you will get ota to the latest version if u want.
Sent from my Nexus 7
Click to expand...
Click to collapse
Oh i see. . How do i get to know if its 4.1.1 ? THere are two kind of RUUs..
1. OTA_ENDEAVOR_U_JB_45_S_hTC_Asia_TW_3.14.709.16-2.17.709.7_release_290501b59ldhm19jb48jdy.zip
2. RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_HK_3.14.708.28_Radio_5.1204.162.29_release_299865_signed.exe
Try the .708. which matches yours. The first one is OTA.
Sent from my HTC One X
prafulk1987 said:
So if I get this right . .
1. Bootloader is already unlocked ?
2. Flash Custom Recovery with PHILZ 6x version (latest one out now)
3. Flash custom ROM. . is the one that i have selected OK ? (OneX The Next Chapter! v1.2 | 4.18.401.3| APM | EQS| WIFI FIX| SENSE 5)
4. Flash custome kernel (which comes along with the image)
Done ?
Click to expand...
Click to collapse
1. Your bootloader is unlocked, so if you want to flash rom that's good, but if you want to instal ruu you must lock it
2. Flash 5.x version, because on 5.x you won't have problem with touchscreen, i think that 6.x version has touch problem
3. Yeah that's fine
4. Flash custom kernel in recovery, than reboot in bootloader and flash boot.img from kernel.zip via fastboot
nikola016 said:
1. Your bootloader is unlocked, so if you want to flash rom that's good, but if you want to instal ruu you must lock it
2. Flash 5.x version, because on 5.x you won't have problem with touchscreen, i think that 6.x version has touch problem
3. Yeah that's fine
4. Flash custom kernel in recovery, than reboot in bootloader and flash boot.img from kernel.zip via fastboot
Click to expand...
Click to collapse
Thanks for all the help guys. .with your help i was able to install the custom ROM. However it did not solve the camera issue. .
So i have to now try with 4.1.1 as it was earlier working with this version. .
So I have one doubt :
Before relocking the bootloader and installing stock 4.1.1 RUU as suggested by members here, can i try loading "Clean Rom 4.1.1 Version" on the existing setup ? I mean my phone is on 4.2.2, so can i install a ROM which is based on 4.1.1 ?
Or do you suggest i relock the bootloader and put 4.1.1 only ?
I had the same issue with the camera when i upgraded to the latest version. After a while I noticed that I can make the camera focus nicely when on close shot by knocking the phone. Guess the best way or traditional way of solving problem is still knocking...
Well knocking doesnt help in my case. .
CAn i directly flash a 4.1.1 based custom ROM on a 4.2.2 based custom ROM ?
prafulk1987 said:
Well knocking doesnt help in my case. .
CAn i directly flash a 4.1.1 based custom ROM on a 4.2.2 based custom ROM ?
Click to expand...
Click to collapse
Jes you can...full wipe, flash boot.img from 4.1.1 and flash rom from recovery
Sent from my EndeavorU using xda app-developers app
Hi,
I have an UK HOX which is running CM11. I am giving it my father and want to revert to stock beforehand. I don't have a nandroid backup & can't seem to find one which will work. Is this possible or will I be stuck on CM?
I'm currently on HBOOT 1.36 & radio 5.1204 (not sure if that's relevant). Please let me know if there's more info I can provide.
GX45 said:
Hi,
I have an UK HOX which is running CM11. I am giving it my father and want to revert to stock beforehand. I don't have a nandroid backup & can't seem to find one which will work. Is this possible or will I be stuck on CM?
I'm currently on HBOOT 1.36 & radio 5.1204 (not sure if that's relevant). Please let me know if there's more info I can provide.
Click to expand...
Click to collapse
give the result from command fastboot getvar version-main and then we will see
Thanks,
version-main: 3.14.206.27
GX45 said:
Thanks,
version-main: 3.14.206.27
Click to expand...
Click to collapse
now you must find nandroid backup with this numbers for One X or ask @T3nd3rB33£ to upload for you
Here's the link to the post,
http://forum.xda-developers.com/showthread.php?p=55550765
Hope it helps
GX45 said:
Thanks,
version-main: 3.14.206.27
Click to expand...
Click to collapse
This is what you search and don't forget to say thanks to T3nd3rB33£
Thanks to you both!
Hi just read the thread properly, I have confused you in my pm, Thant is right, your on hboot 1.36 so you need my nand not glenbrownies. This is the stock nand from before the jb update which has the hboot version 1.1? You will need to update in settings about phone check for updates and you'll then have sense 5 installed.
You can install a nand which has a lower hboot version but not a nand that has a higher hboot version.
T3nd3rB33£ said:
Hi just read the thread properly, I have confused you in my pm, Thant is right, your on hboot 1.36 so you need my nand not glenbrownies. This is the stock nand from before the jb update which has the hboot version 1.1? You will need to update in settings about phone check for updates and you'll then have sense 5 installed.
You can install a nand which has a lower hboot version but not a nand that has a higher hboot version.
Click to expand...
Click to collapse
No worries. Thanks a million for the help
Can I just get one last noob question out the way - in the nandroid backup folder, are they both the stock boot.img and recovery.img I need to flash after restoring? Or do I need to find a separate stock boot & recovery img?
I've successfully reverted back to stock. Only issue I have now is that the official OTA update won't install. It downloads and boots into the stock recovery, then about a third of the way up the progress bar the process stops and the recovery icon changes to the red triangle with the exclamation mark in it.
I've also tried it again after doping a factory reset with no luck. Any experience with this happening?
GX45 said:
I've successfully reverted back to stock. Only issue I have now is that the official OTA update won't install. It downloads and boots into the stock recovery, then about a third of the way up the progress bar the process stops and the recovery icon changes to the red triangle with the exclamation mark in it.
I've also tried it again after doping a factory reset with no luck. Any experience with this happening?
Click to expand...
Click to collapse
you must to put the stock recovery for 3.14 base
T3nd3rB33£ said:
Hi just read the thread properly, I have confused you in my pm, Thant is right, your on hboot 1.36 so you need my nand not glenbrownies. This is the stock nand from before the jb update which has the hboot version 1.1? You will need to update in settings about phone check for updates and you'll then have sense 5 installed.
You can install a nand which has a lower hboot version but not a nand that has a higher hboot version.
Click to expand...
Click to collapse
Thant said:
you must to put the stock recovery for 3.14 base
Click to expand...
Click to collapse
I've flashed the stock recovery & still no joy. Also tried flashing the 'firemware.zip' file from the OTA and trying to install the it manually with no success, either.
GX45 said:
I've flashed the stock recovery & still no joy. Also tried flashing the 'firemware.zip' file from the OTA and trying to install the it manually with no success, either.
Click to expand...
Click to collapse
take the recovery.img from firmware.zip and flash it report back the backup must be with the same numbers like your
Thant said:
take the recovery.img from firmware.zip and flash it report back the backup must be with the same numbers like your
Click to expand...
Click to collapse
Just flashed the recovery from the firmware.zip file & the OTA update fails at same stage.
My bootloader is unlocked, should it be relocked for this to work?
Edit: Relocked bootloader & tried with the same result. I noticed the hboot img file in the 'firmware' zip is a higher version than mine (1.36) ... Would it be worth flashing this then trying again?
GX45 said:
Just flashed the recovery from the firmware.zip file & the OTA update fails at same stage.
My bootloader is unlocked, should it be relocked for this to work?
Edit: Relocked bootloader & tried with the same result. I noticed the hboot img file in the 'firmware' zip is a higher version than mine (1.36) ... Would it be worth flashing this then trying again?
Click to expand...
Click to collapse
don't use the recovery from OTA update use previos one or this for your main version and must be recovery for your main version
other way is to lock the bootloader flash firmware.zip then flash custom rom or stock nandroid backup. But you need to see your main version again after flashing the zip
Thant said:
don't use the recovery from OTA update use previos one or this for your main version and must be recovery for your main version
other way is to lock the bootloader flash firmware.zip then flash custom rom or stock nandroid backup. But you need to see your main version again after flashing the zip
Click to expand...
Click to collapse
Here's the 'getvar all' info
version: 0.5a
version-bootloader: 1.72.
version-baseband: 5.1204.
version-cpld: None
version-microp: None
version-main: 4.18.206.4
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: O2___001
devpower: 92
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
Now the wifi and SIM card/mobile data won't work. Where do I go from here?
GX45 said:
Here's the 'getvar all' info
version: 0.5a
version-bootloader: 1.72.
version-baseband: 5.1204.
version-cpld: None
version-microp: None
version-main: 4.18.206.4
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: O2___001
devpower: 92
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
Now the wifi and SIM card/mobile data won't work. Where do I go from here?
Click to expand...
Click to collapse
Now you must unlock your bootloader flash Philz 5.15.9 find nand backup 4.18.206.4 copy to sd card install it flash boot.img and flash recovery from OTA and you are full stock or you can install custom rom near to stock like Maximus HD or ARHD or som kitkat roms
Thant said:
don't use the recovery from OTA update use previos one or this for your main version and must be recovery for your main version
other way is to lock the bootloader flash firmware.zip then flash custom rom or stock nandroid backup. But you need to see your main version again after flashing the zip
Click to expand...
Click to collapse
Thant said:
Now you must unlock your bootloader flash Philz 5.15.9 find nand backup 4.18.206.4 copy to sd card install it flash boot.img and flash recovery from OTA and you are full stock or you can install custom rom near to stock like Maximus HD or ARHD or som kitkat roms
Click to expand...
Click to collapse
Awesome, that's worked! Got the JB update restored, runs great! It does say there's another update to install but I get an HTC error saying basically the device is rooted (I installed the new recovery & relocked bootloader, it's def not rooted anymore) but I don't care to be perfectly honest.
Thank you guys so much for all your help!