I need some help with this I rooted my first gen kindle fire with the kindle fire utility v0.9.6found on this website. Everything went successful I installed superuser, firefirefire and a new rom. I dodn't like it so I downloaded the stock update from amazon and tried to install it using twrp but it said that it filed and when I tried to reboot it it said it had no OS installed. I can make the kindle appear on computer but I can't open it only right-click it. I've tried installing twrp manually but I always get stuck at waiting for device. When the Kindle reboots reconnects and disconnects and then reconnects. But all I see is the kindle fire logo. It can sit there for hours and it doesn't do anything.I've tried KindleUnbrick Utility V0.1 V 1.0 and V1.1 But those don't work because they say the device was offline even it actually wasn't. Iv tried everything unless someone has an idea.
Related
Hi,
I installed Android Jelly Bean using the Kindle Fire Utility 0.9.6, sometime back. It was working fine until one fine morning, when the Kindle failed to boot up. The white-and-blue Kindle Fire logo came up, followed by the Google Nexus animation (this was only on one half of the screen, the other half was blank).
So I rebooted into TWRP recovery mode successfully and tried to reinstall the ROM for 4.2.2, however again the Kindle hung up at the animation screen. I tried to use the Kindle Fire Utility, but the kindle appeared offline in it.
I even installed Soupkit on my Ubuntu laptop and tried to connect my kindle to it. It still showed the kindle as offline.
I really liked the Jelly Bean feel on my kindle and now I am missing it.
I hope someone is able to help me out of this.
Thanking in advance,
Aditya Pratap V.
Which 4.2.2 Rom did you install?
Sent from my Nexus 7 using Tapatalk HD
I have a rooted kindle fire 2 stuck in the boot logo. twrp is installed, I've tried unsuccessfully to use kfu, I have a mac computer and cannot figure out how to get my baby up and running again. I can get it into recovery, I can get the mac to recognize device, i have downloaded the stock through amazon but when I try to install keeps giving me error on update.zip file. Please help me.
Hey Everyone,
I have been using these forums for the last year and a half and It has helped me a whole bunch to successfully root all of the android devices my family has. I have however ran into a problem with a 1st gen Kindle Fire. It is stuck at the orange and white kindle fire logo. So a little background, I have rooted this Kindle in the past and succeeded in flashing Cyanogenmod's jb. I changed it back to the old Kindle interface so that my sisters can use it for reading but they wanted to use it for games. I decided that I should just change it back to jb since I would have to go through the trouble of flashing google play. Now, here's when things go wrong.
I started by using KFU 0.9.6 since I was lazy and didn't want to go through my old method. I granted SU and also installed TWRP and FireFireFire. now, I found a rom by Cyanogenmod cm10.1.3otter and decided to flash it onto my device. Everything went fine but it wouldn't boot past the Cyanogenmod boot screen. So I put another rom on (cm10.1.2) and flashed that. It worked and i started using it under the assumption there was nothing wrong. I later discovered when entering the internet password that my keyboard was not working and nothing would allow it to work. I then decided that I would get the kindle rom back on and factory reset and wipe the device. When I flashed the Kindle rom and restarted it, It got stuck and would not boot past the Orange and white kindle fire logo. After 2 full charges and 48 hours, it is still stuck. I tried to check if the kindle showed up under ADB devices and it does but when I run adb shell(for one of the guides) it comes up with "no such file or directory." When I run KFU, adb is online but boot status is unknown. When I try to run any of the tools in KFU, waiting for device is shown and does not go away despite disconnecting and reconnecting/ power on and off.
I have been looking nonstop for the past two days without any help. I have tried to follow many of the guides online, but I never succeed. Can someone please help me solve this problem, I am completely stuck.
jaredahuey said:
Hey Everyone,
I have been using these forums for the last year and a half and It has helped me a whole bunch to successfully root all of the android devices my family has. I have however ran into a problem with a 1st gen Kindle Fire. It is stuck at the orange and white kindle fire logo. So a little background, I have rooted this Kindle in the past and succeeded in flashing Cyanogenmod's jb. I changed it back to the old Kindle interface so that my sisters can use it for reading but they wanted to use it for games. I decided that I should just change it back to jb since I would have to go through the trouble of flashing google play. Now, here's when things go wrong.
I started by using KFU 0.9.6 since I was lazy and didn't want to go through my old method. I granted SU and also installed TWRP and FireFireFire. now, I found a rom by Cyanogenmod cm10.1.3otter and decided to flash it onto my device. Everything went fine but it wouldn't boot past the Cyanogenmod boot screen. So I put another rom on (cm10.1.2) and flashed that. It worked and i started using it under the assumption there was nothing wrong. I later discovered when entering the internet password that my keyboard was not working and nothing would allow it to work. I then decided that I would get the kindle rom back on and factory reset and wipe the device. When I flashed the Kindle rom and restarted it, It got stuck and would not boot past the Orange and white kindle fire logo. After 2 full charges and 48 hours, it is still stuck. I tried to check if the kindle showed up under ADB devices and it does but when I run adb shell(for one of the guides) it comes up with "no such file or directory." When I run KFU, adb is online but boot status is unknown. When I try to run any of the tools in KFU, waiting for device is shown and does not go away despite disconnecting and reconnecting/ power on and off.
I have been looking nonstop for the past two days without any help. I have tried to follow many of the guides online, but I never succeed. Can someone please help me solve this problem, I am completely stuck.
Click to expand...
Click to collapse
You must enable adb on cm10 for one and the driver has to be modified for the pc to detect it due to pid and vid changes in cm10.
Thepooch said:
You must enable adb on cm10 for one and the driver has to be modified for the pc to detect it due to pid and vid changes in cm10.
Click to expand...
Click to collapse
I am aware of that however, I cannot boot to cm10. If i could boot to cm10, I would know what to do but right now I am still stuck at the kindle fire logo.
I rooted my kindle and installed a 2nd bootloader and TWRP it worked fine for a few days but then i decided to upgrade my TWRP and i some how corrupted my bootloader and now my kindle is stuck on the boot screen which shows the logo Kindle in White and Fire in Orange it does not go ahead. My pc does not even detect my kindle so I read this thread
http://forum.xda-developers.com/show....php?t=1869297
but i am not able to solve this problem.
It does not go into fastboot.
I tried to upgrade from TWRP 2.6.0.0 to 2.8
I think the problem was that i did not install FireFireFire in my kindle
I used usb 3.0 to do all of this.
Please Help
check here for solution
http://forum.xda-developers.com/showpost.php?p=59900685&postcount=4
I was trying to install CM 12.1 to my Kindle Fire HD 8.9 and I believe it is bricked. I feel as if there is an easy fix but I have been trying for 2 month to no avail. So I finally decided to make an account to try to fix it. So I was using a tutorial to root my Kindle Fire, (I'm a new user so I can't post outside links yet) and everything was going fine until it would only boot into the blue Kindle Fire logo. After about a month I figured out that it was just my terrible, broken volume buttons, and I eventually booted my device into TWRP. From there, I tried to add the CM 12.1 to the Kindle, but it wouldn't recognize my device so I couldn't get into the device to add the files. So I just backed up my OS, and tried to boot into my recovery. I read somewhere that it is a big no-no. Who knows? Anyways, it booted into a normal Kindle Fire logo, just stuck. I did get my device into fastboot, but it won't recognize the device. Every time I try to use any recovery tool, KFHD SRT in specific, it just says no device found. I've been messing with drivers for ages. I've tried using the Amazon driver installer, tried using Android_winusb.inf (I don't even know if I was supposed to do that) and somehow every time I'd uninstall the driver, it would re-install as Android ADB Interface, and wouldn't be recognized by anything. Not ADB, or any recovery. Any help please? Sorry if this was posted in the wrong section, but please, someone just help me get my device running in CM 12.1 or any CM.