[Q] Kindle Fire 1st gen Stuck at Boot Logo - Kindle Fire Q&A, Help & Troubleshooting

Hey Everyone,
I have been using these forums for the last year and a half and It has helped me a whole bunch to successfully root all of the android devices my family has. I have however ran into a problem with a 1st gen Kindle Fire. It is stuck at the orange and white kindle fire logo. So a little background, I have rooted this Kindle in the past and succeeded in flashing Cyanogenmod's jb. I changed it back to the old Kindle interface so that my sisters can use it for reading but they wanted to use it for games. I decided that I should just change it back to jb since I would have to go through the trouble of flashing google play. Now, here's when things go wrong.
I started by using KFU 0.9.6 since I was lazy and didn't want to go through my old method. I granted SU and also installed TWRP and FireFireFire. now, I found a rom by Cyanogenmod cm10.1.3otter and decided to flash it onto my device. Everything went fine but it wouldn't boot past the Cyanogenmod boot screen. So I put another rom on (cm10.1.2) and flashed that. It worked and i started using it under the assumption there was nothing wrong. I later discovered when entering the internet password that my keyboard was not working and nothing would allow it to work. I then decided that I would get the kindle rom back on and factory reset and wipe the device. When I flashed the Kindle rom and restarted it, It got stuck and would not boot past the Orange and white kindle fire logo. After 2 full charges and 48 hours, it is still stuck. I tried to check if the kindle showed up under ADB devices and it does but when I run adb shell(for one of the guides) it comes up with "no such file or directory." When I run KFU, adb is online but boot status is unknown. When I try to run any of the tools in KFU, waiting for device is shown and does not go away despite disconnecting and reconnecting/ power on and off.
I have been looking nonstop for the past two days without any help. I have tried to follow many of the guides online, but I never succeed. Can someone please help me solve this problem, I am completely stuck.

jaredahuey said:
Hey Everyone,
I have been using these forums for the last year and a half and It has helped me a whole bunch to successfully root all of the android devices my family has. I have however ran into a problem with a 1st gen Kindle Fire. It is stuck at the orange and white kindle fire logo. So a little background, I have rooted this Kindle in the past and succeeded in flashing Cyanogenmod's jb. I changed it back to the old Kindle interface so that my sisters can use it for reading but they wanted to use it for games. I decided that I should just change it back to jb since I would have to go through the trouble of flashing google play. Now, here's when things go wrong.
I started by using KFU 0.9.6 since I was lazy and didn't want to go through my old method. I granted SU and also installed TWRP and FireFireFire. now, I found a rom by Cyanogenmod cm10.1.3otter and decided to flash it onto my device. Everything went fine but it wouldn't boot past the Cyanogenmod boot screen. So I put another rom on (cm10.1.2) and flashed that. It worked and i started using it under the assumption there was nothing wrong. I later discovered when entering the internet password that my keyboard was not working and nothing would allow it to work. I then decided that I would get the kindle rom back on and factory reset and wipe the device. When I flashed the Kindle rom and restarted it, It got stuck and would not boot past the Orange and white kindle fire logo. After 2 full charges and 48 hours, it is still stuck. I tried to check if the kindle showed up under ADB devices and it does but when I run adb shell(for one of the guides) it comes up with "no such file or directory." When I run KFU, adb is online but boot status is unknown. When I try to run any of the tools in KFU, waiting for device is shown and does not go away despite disconnecting and reconnecting/ power on and off.
I have been looking nonstop for the past two days without any help. I have tried to follow many of the guides online, but I never succeed. Can someone please help me solve this problem, I am completely stuck.
Click to expand...
Click to collapse
You must enable adb on cm10 for one and the driver has to be modified for the pc to detect it due to pid and vid changes in cm10.

Thepooch said:
You must enable adb on cm10 for one and the driver has to be modified for the pc to detect it due to pid and vid changes in cm10.
Click to expand...
Click to collapse
I am aware of that however, I cannot boot to cm10. If i could boot to cm10, I would know what to do but right now I am still stuck at the kindle fire logo.

Related

[Q] Am I doing something wrong?

I purchased a factory cable from this forum. I followed the 3 instructions. Nothing. I had already installed the KindleFireUtility 0.9.6. I installed the drivers for my computer - success. I ran the KFU program. My computer states it installed the drivers and adnroid ADB interface successfully. I am getting nothing. I still have the KindleFire logo. I really don't know what else to do other than mail my KF to someone kind enough to unbrick my KF. I looked into all the questions and answers and tried to follow them. No success. Prior to all of this I rooted it successfully as per instructions. I installed the TWRP. I then installed an ICS ROM which made my KF VERY slow. I tried to uninstall. It then got stuck on their logo. I forgot exactly what I did and now it it stuck on the KF logo. I thought that when I plug in the factory cable, a certain screen would pop up and then would be able to follow everything else. I am in no way saavy in reading all these suggestions here only to get myself so confused. s even shocked that I was able to ROOT it and then put in a ICS ROM. Bottom line, I am just absolutely STUCK!!! Can someone guide me to a specific thread here on this forum to follow exactly and specifically what to do and what to expect to see as I am trying to unbrick my KF, or someone I can mail this to... ; ). I live in the Sacramento (California) area. I am THAT desparate!!!
-AOKP ICS ROM
-6.3.1 version
-TWRP
thanks... Ed
Your factory cable works just as intended. It puts the device in fastboot mode (stuck at Kindle Fire logo). If you were stuck at the Kindle Fire logo to begin with, there was no need for a factory cable in the first place.
You need to change the bootmode from fastboot (4002) to normal (4000). Read the first three posts of the Kindle Fire for Beginners guide for help in fixing your problem.
http://forum.xda-developers.com/showpost.php?p=23747567

[Q] Bricked Kindle Fire?? HELP!

Okay so basically I decided to root my Kindle Fire. I have rooted my android phone and my iPod before so I wasn't too worried about it, but it's gone horribly wrong and I need major help.
So here's what happened:
I got my root from rootkindlefire.com and followed the necessary steps (i'm running on 6.3.1)
It got halfway through and froze and I stupidly unplugged my kindle
Then it was stuck on this screen with a yellow triangle with a flame in it and at the bottom is said press power button for recovery, but when I pressed it nothing happened
So I went messing around online, in my drivers, etc. I ended up deleting my kindle drivers (like the original ones) and now my kindle is freaking out.
I watched this other tutorial on rootkindlefire.com and tried to follow the steps on how to unbrick it but when I managed to get into the recovery (i can't remember what it's called? blue screen with options like install, mount, reboot, etc.) and put the zip drive he said to, in there... i couldn't see it.
I then downloaded KFU and managed to get my kindle to reboot, but it is now stuck on the "Kindle Fire" screen. I can turn it off, get into recovery, etc. I cannot get it to move past the start up screen however.
I do not believe I am in fastboot, but one of the sites I was on could have misled me. Anyway... HELP! please... I'm sad:/
You should be able to find all you need to get it going here http://forum.xda-developers.com/showthread.php?t=1923010
Thepooch said:
You should be able to find all you need to get it going here http://forum.xda-developers.com/showthread.php?t=1923010
Click to expand...
Click to collapse
I followed all the steps and everything worked just like it said....but when my kindle rebooted, it is still stuck at the kindle fire screen but now there's animation...which it did not have before.
Any suggestions?
If your getting animation and it doesn`t go any further this usually indicates a broken system which TWRP are you using ? If you are using 2.3.1.1 there`s a problem with how it formats best you revert to an older version 2.2.2.1 or older then it should work for you. Full wipe except your external storage/sdcard, refalsh rom and gapps. The proper methods for wiping are also provided in the link I gave you.
Very good point though make sure your using the newest version of KFU 9.6 the older version uses burrito root which no longer works on the Kindle Fire. Really though alll you need is a bootloader and recovery rooting is obsolete.
lexibrowni said:
Okay so basically I decided to root my Kindle Fire....
I got my root from rootkindlefire.com and followed the necessary steps (i'm running on 6.3.1)
I watched this other tutorial on rootkindlefire.com and tried to follow the steps on how to unbrick it but when I managed to get into the recovery (i can't remember what it's called? blue screen with options like install, mount, reboot, etc.) and put the zip drive he said to, in there... i couldn't see it.
I do not believe I am in fastboot, but one of the sites I was on could have misled me. Anyway... HELP! please... I'm sad:/
Click to expand...
Click to collapse
First off, definitely listen to Thepooch and Josepho1997. Next, do you just want a rooted KF running the basic 6.3.1 firmware, or will you be switching to ICS or JB?
Next, is the blue screen you mentioned the TWRP screen? (TeamWin screen with 8 different choices)? If you are, then go to (I think) the bottom right and select mount, then mount system or USB or whatever it says. After that you can add files for a custom ROM or whatever you want through your computer. I forgot to mention that you need to of your KF into your computer.
Sent from my Amazon Kindle Fire using Tapatalk 2
lexibrowni said:
Okay so basically I decided to root my Kindle Fire. I have rooted my android phone and my iPod before so I wasn't too worried about it, but it's gone horribly wrong and I need major help.
So here's what happened:
I got my root from rootkindlefire.com and followed the necessary steps (i'm running on 6.3.1)
It got halfway through and froze and I stupidly unplugged my kindle
Then it was stuck on this screen with a yellow triangle with a flame in it and at the bottom is said press power button for recovery, but when I pressed it nothing happened
So I went messing around online, in my drivers, etc. I ended up deleting my kindle drivers (like the original ones) and now my kindle is freaking out.
I watched this other tutorial on rootkindlefire.com and tried to follow the steps on how to unbrick it but when I managed to get into the recovery (i can't remember what it's called? blue screen with options like install, mount, reboot, etc.) and put the zip drive he said to, in there... i couldn't see it.
I then downloaded KFU and managed to get my kindle to reboot, but it is now stuck on the "Kindle Fire" screen. I can turn it off, get into recovery, etc. I cannot get it to move past the start up screen however.
I do not believe I am in fastboot, but one of the sites I was on could have misled me. Anyway... HELP! please... I'm sad:/
Click to expand...
Click to collapse
Hi I am exactly where you were at (Deleted drivers=Freaking Out at yellow triangle). What do i do from here!? Please Help Me!!???
http://forum.xda-developers.com/showthread.php?t=1923010
Help
I have done everything that has been listed here. My kindle is stuck on the kindle fire screen, I can not boot into recovery and I do believe the TWRP that was previously on it, has been removed as well as the OS...My son was messing with it and all I could get out of him was he was on a blue screen and swiped to reboot and he thought it said no OS installed. So, I have the done the Alternate method for rooting, however, when run the kfu, it says its online but boot status is unknown. I can not get it to say any different. What am I doing wrong?

[Q] Kindle will only boot to TWRP

I'm rooting a kindle, and some weird things happened while I was rooting it, problems with rooting on Windows 8, But now that I have TWRP and FIREFIREFIRE installed, it won't let me boot to system. It flashes on and off of the shiny kindle Fire screen, then boots to TWRP. KFU says it is in Boot STatus 0x5003. Any help?
Ichigo said:
You're in the recovery boot mode. Change it to normal boot mode using kfu.
a.k.a. Josepho1997
Merry Christmas
Click to expand...
Click to collapse
Hello, sorry to bump an old thread, but when I tried to boot into normal boot mode, it tells me "The system cannot find the file specified." I have been stuck in this TWRP recovery mode for so long. Even when I get into Normal Boot mode, how do I get JellyBean installed so it loads that ROM? I have the Jellybean ROM files on the Kindle, which I can access via TWRP, but don't know how to install. HELP!!!
Well, right now I did a factory reset of the Kindle and I was able to get the KF back to it's defaults. I copied the Jellybean .zip file and gapps Jellybean .zip file to the root of the KF. I booted into Recovery Mode and I was finally able to see both .zip files when I clicked on Install. I thought I could do the Permanent Root now that I did the factory reset, but once I ran it under KFU, it would go through the process to install TWRP and then boot the KF into TWRP, but it doesn't look like it completed the root. How do I complete it?
In the meantime, I had went into Recovery Mode, went to Install and currently loading Jellybean onto the KF. I'm currently stuck at Verifiying partition sizes and it's been sitting there for a few minutes. How long does it take before it's updated to JB?
System Only boots to TWRP and KFU will not see kindle
I have a Kindle Fire 1... Not the HD when I got it in Dec of 2011 I got some help to get TWRP and CM7 Installed on it, and it worked great until a couple of days ago and now there is no help in the kindle fire room anymore so I was wondering if there is someone out there who would be willing to help me to get this to work again either through teamviewer or a Chat of some type, Gtalk, IRC anything at this point to get this to work again.
I have tried everything from a Hard reset, and KFU will not see it and I even tried a unbricking tool and that cannot find it either. Please help me out.
Thanks
CloudStrrife said:
I have a Kindle Fire 1... Not the HD when I got it in Dec of 2011 I got some help to get TWRP and CM7 Installed on it, and it worked great until a couple of days ago and now there is no help in the kindle fire room anymore so I was wondering if there is someone out there who would be willing to help me to get this to work again either through teamviewer or a Chat of some type, Gtalk, IRC anything at this point to get this to work again.
I have tried everything from a Hard reset, and KFU will not see it and I even tried a unbricking tool and that cannot find it either. Please help me out.
Thanks
Click to expand...
Click to collapse
What exactly is going on...spare no detail...
Sent from my Nexus 7 using Tapatalk 2
Stuck booting into TWRP
Hello Forum Lords, I hope that I found the proper thread for my problem.
I was simply trying to install Cyanogemod 9 on my wifes replacement KF1 after the first KF1 suffered some sore of hardware malfunction and would no longer take a charge. Somehow, somewhere I went horribly wrong this time around. I got stuck at the KF1 logo and eventually I got it to boot, but only to recovery.
My predicament is this: My KF1 is stuck booting into TWRP. Device manager on Win Vista recognizes the KF1 as Android Composite ADB Interface. When I try to use the KFU to boot the device into Normal Mode it says "cannot find the drive specified".
At the KFU starting menu, it says ADB Status: Online, Boot Status: 0x5003.
My ultimate goal is to get this thing running Cyanogenmod again. I am painfully noob at all of this. Please speak as you would to an escaped chimp who will not let go of the keyboard and mouse.
Thank you, anybody

[Q] Kindle Fire 8.9 Stuck on static boot screen.

Hello,
I have recently attempted to install the 2nd bootloader, TWRP, and CM-10.2 mods on my Kindle FIre HD 8.9 and ended up with a bootlooping brick. Being as inexperienced as I am, I took the risky road and did not back up my device before attempting this... Lesson learned (Spent days on this problem when a back up takes minutes...) Currently, I can access fastboot and flash files but nomatter what I end up with a similar result of a static boot screen (Orange). I have tried KFHD System.img Restore Tool (Here) many times on different machines. I have tried KFFirstAide and it refuses to let me download from the server and thus aborts re-flashing the kindle. I have tried manually flashing 8.1.4 system, boot, and recovery images again with no results (As well as cleared the cache and userdata each time). I have downgraded the bootloader to 8.1.4 using the file given in Hashcode's Guide to install TWRP (Here). I have flashed these files from a Windows, a Mac, and now a Linux PC. Currently the Kindle is staring at me with a Kindle Fire Orange static boot logo. It is recognized by a computer for about 1-2 seconds after I first hit the power switch(I can catch it in fastboot here). Then it disappears and sits idly at the boot logo. Sometimes it reboots and then repeats the process, sometimes it just stays this way until I turn it off via hard reset.
I check the MD5 sums on each of the files and none of them have been corrupted while downloading. So now after looking through every forum I can bear, I come here. Am I missing something simple? Or is my device a devil spawn that refuses to return to stock images?
Hmm, off flashing from fastboot should typically work, since you were attempting to flash cm 10.2 I have to ask something because I am slightly uncertain of this myself, but did you ever get twrp running at one point before all this happened, and second if so did you ever wipe any of the partitions or try to flash the ROM?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Unfortunately no. I was never able to get into TWRP as the blue logo has never appeared. Directly after my first attempt at this I rebooted and got the red screen or wall of fire. I "fixed" that by reflashing stock boot, bootloader, recovery, and system image partitions to 8.1.4. Yet instead of a working device I now have either a boot loop or a fixed orange logo. I have gotten the device into stock recovery once (haven't been able to reproduce this result) but it shutdown while the process was underway(About half way??). I have also gotten the device to boot into a animated logo that then proceeded to a data corruption screen, but before I could even read the entire message the device shut off and began another set of boot loops. It looked like a amazon stock os prompt screen. Before this even began I had a normal Kindle fire that I had rooted. I forget what software version it was on before all of this unfortunately.
Sounds like the system image is slightly corrupted or something if the os had that kind of error about data corruption but you said the md5's march so that is weird. You try reflashing the boot partition again since reflashing system didn't work? This is frustrating, mainly because with out adb access from a decent recovery I have no Linux commands to work with, if worst comes to worst I think there's a way to reform at the system partition from fastboot but I wouldn't go for that just yet, I don't know the command offhand but if you did the wrong one I think there's a way it would clear all data on all partitions which would be very very bad. I'll ask hashcode what he thinks cause this is weird.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
I have tried flashing all partitions before. Will try again soon. Also, I have another piece of information as well even if it isn't relevant. I originally bricked my Kindle at first, flashed the wrong bootloader. So I bought a for-parts Kindle (Same model) that had a busted screen and took out its motherboard and placed it into my device. Then I rooted the stock os on the new MB and the rest of the story is already in this thread. It still charges and fastboots but nothing other than a static orange boot screen so far. Thank you for helping me out on this; really hope that this can be fixed.
Thinkwithportals said:
Hello,
I have recently attempted to install the 2nd bootloader, TWRP, and CM-10.2 mods on my Kindle FIre HD 8.9 and ended up with a bootlooping brick. Being as inexperienced as I am, I took the risky road and did not back up my device before attempting this... Lesson learned (Spent days on this problem when a back up takes minutes...) Currently, I can access fastboot and flash files but nomatter what I end up with a similar result of a static boot screen (Orange). I have tried KFHD System.img Restore Tool (Here) many times on different machines. I have tried KFFirstAide and it refuses to let me download from the server and thus aborts re-flashing the kindle. I have tried manually flashing 8.1.4 system, boot, and recovery images again with no results (As well as cleared the cache and userdata each time). I have downgraded the bootloader to 8.1.4 using the file given in Hashcode's Guide to install TWRP (Here). I have flashed these files from a Windows, a Mac, and now a Linux PC. Currently the Kindle is staring at me with a Kindle Fire Orange static boot logo. It is recognized by a computer for about 1-2 seconds after I first hit the power switch(I can catch it in fastboot here). Then it disappears and sits idly at the boot logo. Sometimes it reboots and then repeats the process, sometimes it just stays this way until I turn it off via hard reset.
I check the MD5 sums on each of the files and none of them have been corrupted while downloading. So now after looking through every forum I can bear, I come here. Am I missing something simple? Or is my device a devil spawn that refuses to return to stock images?
Click to expand...
Click to collapse
"I have recently attempted to install the 2nd bootloader, TWRP, and CM-10.2 mods on my Kindle FIre HD 8.9 and ended up with a bootlooping brick."
I have the same problem but when I try fastboot mode the computer wont even find the device
Alrighty, well. I woke up this morning and decided to re download all of the system, boot, and recovery image files. I flashed them to the device and it again boot-looped for about an hour. I set it up next to me and started reading through the forums for repair via soldering eMMC to SD card reader. I look down and what is starting back at me? A fully working Kindle waiting in initial setup for input... Yet within about a minute it is back into the old boot looping game again. Hardware problem? A short maybe???
possibly or maybe it has a bad emmc chip.
Sent from my LG-P769 using xda app-developers app
Hm, well I think I might just give up on this MB then. I am considering looking into my hard-bricked motherboard and using Kurohyou's pin-out. Even if my soldering skills are a bit rusty.
Thank you anyway for your help. I will report my progress in the other thread from here on out.
Careful not to melt the contact pads, I just ruined one of my Xbox 360 controllers today unsoldering a trigger, cheap parts.... Long story short controller falls in dogs water bowl, circuit board goes in rice, rice gets stuck under a trigger, I ruin controller unsoldering trigger... Least I have 4 more. But anyways yea careful, I suggest at least an st7 tip and not to let it get to hot, read someone else managed to melt a contact on a kf2 I think it was.
Sent from my Amazon Kindle Fire HD using Tapatalk

Kindle Fire HD 8.9 recovery brick?

I was trying to install CM 12.1 to my Kindle Fire HD 8.9 and I believe it is bricked. I feel as if there is an easy fix but I have been trying for 2 month to no avail. So I finally decided to make an account to try to fix it. So I was using a tutorial to root my Kindle Fire, (I'm a new user so I can't post outside links yet) and everything was going fine until it would only boot into the blue Kindle Fire logo. After about a month I figured out that it was just my terrible, broken volume buttons, and I eventually booted my device into TWRP. From there, I tried to add the CM 12.1 to the Kindle, but it wouldn't recognize my device so I couldn't get into the device to add the files. So I just backed up my OS, and tried to boot into my recovery. I read somewhere that it is a big no-no. Who knows? Anyways, it booted into a normal Kindle Fire logo, just stuck. I did get my device into fastboot, but it won't recognize the device. Every time I try to use any recovery tool, KFHD SRT in specific, it just says no device found. I've been messing with drivers for ages. I've tried using the Amazon driver installer, tried using Android_winusb.inf (I don't even know if I was supposed to do that) and somehow every time I'd uninstall the driver, it would re-install as Android ADB Interface, and wouldn't be recognized by anything. Not ADB, or any recovery. Any help please? Sorry if this was posted in the wrong section, but please, someone just help me get my device running in CM 12.1 or any CM.

Categories

Resources