Check and could not find an answer to this issue.
Quick and dirty explaination
Have windows 7 Laptop
have usb cable to sync T989
have 2 T989's
my T989 connects to samsung Kies fine. Kies see's phone and updated firmware
wife's T989 doesn't connect but charges when connected to laptop. Windows 7 says the usb device drives cant be recognized so Kies wont see phone.
Now the question. Is there any other way to connect the T989 to Kies for the update beside the cable?
MAC20 said:
Check and could not find an answer to this issue.
Quick and dirty explaination
Have windows 7 Laptop
have usb cable to sync T989
have 2 T989's
my T989 connects to samsung Kies fine. Kies see's phone and updated firmware
wife's T989 doesn't connect but charges when connected to laptop. Windows 7 says the usb device drives cant be recognized so Kies wont see phone.
Now the question. Is there any other way to connect the T989 to Kies for the update beside the cable?
Click to expand...
Click to collapse
No try it with odin :thumbup:
Sent from my SGH-T989 using Tapatalk 2
MAC20 said:
Check and could not find an answer to this issue.
Quick and dirty explaination
Have windows 7 Laptop
have usb cable to sync T989
have 2 T989's
my T989 connects to samsung Kies fine. Kies see's phone and updated firmware
wife's T989 doesn't connect but charges when connected to laptop. Windows 7 says the usb device drives cant be recognized so Kies wont see phone.
Now the question. Is there any other way to connect the T989 to Kies for the update beside the cable?
Click to expand...
Click to collapse
i had the same problem with Kies when i tried to update to JB. several hours of problems with Kies. eventually i gave up and used TWRP to flash the ROM. Much much faster way to do it.
Related
I can't get USB mounting to work on my linux PC, windows PC, or work windows laptop.
The computer completely fails to recognize the phone, even when I manually tell it to connect as usb storage device.
I've tried three different USB cables.
ODIN mode isn't recognized either, no USB devices are detected and Odin does not display an ID for the phone.
So WTF do I do know? I believe I need to return to stock firmware but I don't know how without using Odin.
You need to download the drivers for your computer in order for it to read your device. I believe its somewhere here in the forums if not Google it. I would post a link but I'm not on my computer
Sent from my SGH-T989 using xda premium
You can download the drivers from the how to root thread in the dev section.
Sent from my SGH-T989 using xda premium
Are you using the original samsung cable? Mine refuses to be recognized by my pc's if it's not the original cable, works fine with the original but the system never picks it up with any others.
keenerb said:
I can't get USB mounting to work on my linux PC, windows PC, or work windows laptop.
The computer completely fails to recognize the phone, even when I manually tell it to connect as usb storage device.
I've tried three different USB cables.
ODIN mode isn't recognized either, no USB devices are detected and Odin does not display an ID for the phone.
So WTF do I do know? I believe I need to return to stock firmware but I don't know how without using Odin.
Click to expand...
Click to collapse
i to just went thru this tried 3 cables 3 pcs and 4 operating systems and all my phone would do is charge. flashed stock rom, flashed malice, now on slick mod and still no usb conectivety . called samsung and went thru there trouble shooting..... no luck. called tmobile and went thru there trouble shooting....no luck. so now tmobile is sending me a new phone and should be here today(free overnight with out me asking, think they may be seeing alot of this lately)
Thanks for all the help everyone.
I was using the provided Samsung cable, I have installed the USB drivers.
It's just not working.
T-Mo is sending me a new one.
Did you try installing Kies SW from the Samsung site? Installing this SW will also install all of the appropriate drivers on your PC.
http://www.samsung.com/us/support/owners/product/SGH-T989ZKBTMB
Rod3 said:
Did you try installing Kies SW from the Samsung site? Installing this SW will also install all of the appropriate drivers on your PC.
http://www.samsung.com/us/support/owners/product/SGH-T989ZKBTMB
Click to expand...
Click to collapse
samsung had me install kies and the driver package seperatly . thats the thing thou i have been using my phone just fine up to 2 days ago then it just would not connect to the computer.
slamindamalibu said:
samsung had me install kies and the driver package seperatly . thats the thing thou i have been using my phone just fine up to 2 days ago then it just would not connect to the computer.
Click to expand...
Click to collapse
And?? Solve the problem or what? We been hanging here for years
Alright I am running cm9 and have been for weeks with no issues. I got the new galaxy s3 and installed the drivers on my pc to root it and all that. I want to change roms on my E4GT though so I go to plug it in and it charges but will not connect so I figured I had to reinstall the usb drivers for my e4gt so I did and still nothing. I am in no way a newb i have flashed tons of roms and I know I did not do anything wrong. I believe I am just missing a driver. Can someone point me in the right direction? I have the latest version of kies installed and the drivers straight from samsungs website.
Made a little progress but not much. I realized I didnt have usb debugging enabled so I enabled that but now when I plug it in it just says usb debugging enabled instead of asking if I want to mount as storage device I have tried rebooting phone and pc several times. I am running out of ideas.
Did you get the drivers by installing Samsung Kies?
I ran into a similar issue once. I removed all Samsung software with all devices disconnected, did a reboot, re-installed a new copy of Kies, and when I plugged in the device, I opened the notification and told it to skip searching Windows Update.
Also, make sure you are plugging it into a powered USB port, so one on the back of your computer. Sometimes laptops don;t provide enough power either. My girlfriend's OG Epic refused to flash on my MacBook Pro, but worked fine on a desktop.
Latest version of Samsung Kies: http://org.downloadcenter.samsung.com/content/SW/201105/20110512115717796/Kies_2.3.2.12054_20_1.exe
Thank you very much i will give it a try and report back.
Sent from my SPH-D710 using XDA
Mattheyu said:
Did you get the drivers by installing Samsung Kies?
I ran into a similar issue once. I removed all Samsung software with all devices disconnected, did a reboot, re-installed a new copy of Kies, and when I plugged in the device, I opened the notification and told it to skip searching Windows Update.
Also, make sure you are plugging it into a powered USB port, so one on the back of your computer. Sometimes laptops don;t provide enough power either. My girlfriend's OG Epic refused to flash on my MacBook Pro, but worked fine on a desktop.
Latest version of Samsung Kies: http://org.downloadcenter.samsung.com/content/SW/201105/20110512115717796/Kies_2.3.2.12054_20_1.exe
Click to expand...
Click to collapse
Actually no i did not get the drivers by installing kies because I already had it i got the sprint sph d710 usb drivers. Should I uninstall those and just install kies?
Well this is a rediculus problem that I am having now.. I cant install kies because it is saying I am not connected to the internet and I clearly am as I am posting this on the same pc that I am trying to install on.. I have tried rebooting the pc that does nothing.
Alright I got kies to install but still the same thing when I plug the phone in it says usb debugging enabled i really have no idea what is going on.
have you tried different ports on your computer, also have you maybe tried a different computer. If not it could be phone issue I fried my usb board on mine. best bet to try that is to flash another rom if possible and see if it you can connect to computer
scud626 said:
have you tried different ports on your computer, also have you maybe tried a different computer. If not it could be phone issue I fried my usb board on mine. best bet to try that is to flash another rom if possible and see if it you can connect to computer
Click to expand...
Click to collapse
I have tried different ports but not a different comp. Ya I am gonna flash a new rom and see if that helps. How could I have fried the usb board though? I havent touched the phone in days since I got the gs3.
Yup Just flashed the new Super Nova rom and now everything is working again, thank you very much for all the help and if anyone hasnt checked out that rom yet they need to its awesome!
Hi since the last firmware update on note 2(4.1.2) my usb connection to computer have stopped working i plug it and just charge, odin, kies and windows device manager dont recognize it, i have tried in 3 differents computers with 2 differents cables, also a s3 have worked in all computers with both cables, also have restored to factory settings. The charge speed its the same and phone port seems fine. The phone is 2.5 months old, and wasnt rooted.
Can it be firmware problem or its hardware? did the warranty cover this? Also is someone with the same problem?
Should i try flashing to other rom?(with the recovery mode only)
Thanks and sorry for bad english.
i think its firmware problem, if i go download mode the phone is recognized and can flash it with odin
Try changimg to mass storage (ums) imstead of mtp...
Sent from my GT-N7000 using xda app-developers app
Hi i have a strange problem, my phone has been working fine for the last 8 months until just the other day when i connected to my PC via USB and Windows would not detect the phone neither would Kies but the phone does charge and heres the strange bit the phone is detected when in download mode and i am able to flash firmwares via Odin. I have tried resetting the phone flashing fresh stock firmware on, tried 2 different PC's and also 2 different USB cables and all with the same result. So guys any ideas?
DARKKRAKEN said:
Hi i have a strange problem, my phone has been working fine for the last 8 months until just the other day when i connected to my PC via USB and Windows would not detect the phone neither would Kies but the phone does charge and heres the strange bit the phone is detected when in download mode and i am able to flash firmwares via Odin. I have tried resetting the phone flashing fresh stock firmware on, tried 2 different PC's and also 2 different USB cables and all with the same result. So guys any ideas?
Click to expand...
Click to collapse
Hi,
Do you have the proper drivers installed?
Simone said:
Hi,
Do you have the proper drivers installed?
Click to expand...
Click to collapse
Yes, as i said the phone connected fine the last 8 months.
Try toggling usb debugging.
Sent from my Galaxy Note II using xda premium
OK I bought a note 10.1 2014 off Craigslist. .. the thing is pristine. I can not get it to connect to my pc. I installed the drivers, I even tried my Mac. Both jodin and the computer didn't recognize it. I am out of answers, I am worried is a hardware issue. Any suggestions?
did you download Kies 2 on your PC?
Nope I only used Odin