So I have a stock rooted T889v and i have the stock kernel as well. I downloaded set cpu today just to see if I can change governors. To my surprise, I have options to do so. It was with the pegasusq governor before I changed it to on demand.
Is this right? Does the stock kernel really offer these governors?
Sent from my SGH-T889V using xda app-developers app
Related
I have changed kernels, governors, and io schedulers so many times that I no longer remember what the stock settings are. Can someone who hasn't changed kernels nor modified these tell me what the stock settings are?
Thanks.
I believe it's ondemand and cfq (maybe noop)
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
I'm pretty sure it's ondemand and noop. Perrtttyyyyy sure. Have been wrong though
Sent from my SGH-I747M using Tapatalk 2
Ondemand and cfq.
Is the Pegasusq governer not in the fk23 kernel?
piexil said:
Is the Pegasusq governer not in the fk23 kernel?
Click to expand...
Click to collapse
No
Sent from my SPH-D710 using xda app-developers app
Well that's strange then because it doesn't show up as a governer for any of the programs I use (Setcpu 2.2.4 (the free one) or no-frills cpu control)
piexil said:
Well that's strange then because it doesn't show up as a governer for any of the programs I use (Setcpu 2.2.4 (the free one) or no-frills cpu control)
Click to expand...
Click to collapse
Its not there. Pegasusq isn't a stock governor included in stock kernels, its added into custom kernels
Sent from my hand to your eyes!
We are legion, for we are many!
Oh, I see. I thought it was a samsung made governor.
Hi..my galaxy nexus becomes tooo warm when using it for about 10-15 mins..
I m using purity 4.4 & kernel ak purity v021.. Is it the kernel issue or anything else because it is the first time i have installed a custum kernal...
Kindly help plzzz..
Sent from my Galaxy Nexus using xda app-developers app
Maybe, mine does that occasionally from time to time. But I'm stock everything
Using same setup as you except on Fancy Kernel but when I was previously on Dummy kernel (same Dev) the phone ran very cool. I think you could try flashing Dummy Kernel and using Trickster Mod app to lower GPU clock to 304mhz and min CPU clock to 100+MHz?
edit: or change the governor as for me some governors cause my phone to run at my max clock speed non stop
Sent from my Galaxy Nexus using xda app-developers app
l.Urker said:
Using same setup as you except on Fancy Kernel but when I was previously on Dummy kernel (same Dev) the phone ran very cool. I think you could try flashing Dummy Kernel and using Trickster Mod app to lower GPU clock to 304mhz and min CPU clock to 100+MHz?
edit: or change the governor as for me some governors cause my phone to run at my max clock speed non stop
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Thanx for the reply...i will change to Dummy kernal and try...
l.Urker said:
Using same setup as you except on Fancy Kernel but when I was previously on Dummy kernel (same Dev) the phone ran very cool. I think you could try flashing Dummy Kernel and using Trickster Mod app to lower GPU clock to 304mhz and min CPU clock to 100+MHz?
edit: or change the governor as for me some governors cause my phone to run at my max clock speed non stop
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Hey..i changed to dummy kernel and it works fine now. No heating up.
Thanks a lot..:good:
I see that when running the neak kernel on the uNeak app, theres a section where there are steps for the GPU clock speeds. To oc do you just raise the last step or what? Do I have to add a step if so how do I add one?
Also what is the highest clock you guys have run GPU up to on the note 2? On my n7, I ran it up to 700mhz without issues and 750mhz with occasional lockups
I'd like to do this on carbon with the kernel it comes with if possible.
Sent from my GT-N7105 using Tapatalk 2
Bump?
Sent from my SGH-T889 using Tapatalk 2
nemesis93 said:
I see that when running the neak kernel on the uNeak app, theres a section where there are steps for the GPU clock speeds. To oc do you just raise the last step or what? Do I have to add a step if so how do I add one?
Also what is the highest clock you guys have run GPU up to on the note 2? On my n7, I ran it up to 700mhz without issues and 750mhz with occasional lockups
I'd like to do this on carbon with the kernel it comes with if possible.
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
I have OC'd up to 800MHz, but I usually keep it at 733MHz and underclock the CPU a bit. I don't think the Neak kernel supports OC'ing of any kind. You're better of with Perseus in that regards. By flashing the kernel the STweaks app is also automatically flashed and you can change settings from there.
Sent from my SGH-T889 using Tapatalk 2
minhajmsd said:
I have OC'd up to 800MHz, but I usually keep it at 733MHz and underclock the CPU a bit. I don't think the Neak kernel supports OC'ing of any kind. You're better of with Perseus in that regards. By flashing the kernel the STweaks app is also automatically flashed and you can change settings from there.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Oc is supported for the gpu in the neak I wanna know if its possible to add a step instead of overclocking every step or just the last step
Cpu oc is not available though.
Sent from my SGH-T889 using Tapatalk 2
Hello All,
I can't seem to find the location on this ROM that allows you to change the governor settings... I swear I've looked everywhere!
i dont use that ROM but just FYI, kernel control features may not be built into it. as a matter of fact, a lot of ROMs dont have any built in kernel setting controls. where you using it before and it had it? saw a user running slimbean this morning with ktoonsez kernel. full control
Probably...
xBeerdroiDx said:
i dont use that ROM but just FYI, kernel control features may not be built into it. as a matter of fact, a lot of ROMs dont have any built in kernel setting controls. where you using it before and it had it? saw a user running slimbean this morning with ktoonsez kernel. full control
Click to expand...
Click to collapse
It's the kernel that came with the ROM, 3.4.41-slim-g846750a. I just read of people talking about changing their governors and wanted to give it a try..
i use (and only use) ktoonsez kt747 kernel with any ROM i am on (tasks latest currently). it comes packaged with an app that allows me to select and make governor and scheduler adjustments as well as tweak many other things in order to improve stability and battery life. highly recommend.
You can enable the developers settings by going into settings>about phone>and tap on build number 6 or 7 times and that will unlock the performance options
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Thanks for all the help guys. I activated the developer options, but there are still no governor settings. I think I'll try flashing the KT rom suggested above.
Sent from my SAMSUNG-SGH-I747 using xda premium
Did u try tapping performance >OK and then the option to change I/o scheduler or the option to change CPU governor and clock speed? It will be there
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
drs1og said:
Did u try tapping performance >OK and then the option to change I/o scheduler or the option to change CPU governor and clock speed? It will be there
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
DOH! There it is! THANKS!!!
I suggest asswax and row, good performance and battery life!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app