Hi..my galaxy nexus becomes tooo warm when using it for about 10-15 mins..
I m using purity 4.4 & kernel ak purity v021.. Is it the kernel issue or anything else because it is the first time i have installed a custum kernal...
Kindly help plzzz..
Sent from my Galaxy Nexus using xda app-developers app
Maybe, mine does that occasionally from time to time. But I'm stock everything
Using same setup as you except on Fancy Kernel but when I was previously on Dummy kernel (same Dev) the phone ran very cool. I think you could try flashing Dummy Kernel and using Trickster Mod app to lower GPU clock to 304mhz and min CPU clock to 100+MHz?
edit: or change the governor as for me some governors cause my phone to run at my max clock speed non stop
Sent from my Galaxy Nexus using xda app-developers app
l.Urker said:
Using same setup as you except on Fancy Kernel but when I was previously on Dummy kernel (same Dev) the phone ran very cool. I think you could try flashing Dummy Kernel and using Trickster Mod app to lower GPU clock to 304mhz and min CPU clock to 100+MHz?
edit: or change the governor as for me some governors cause my phone to run at my max clock speed non stop
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Thanx for the reply...i will change to Dummy kernal and try...
l.Urker said:
Using same setup as you except on Fancy Kernel but when I was previously on Dummy kernel (same Dev) the phone ran very cool. I think you could try flashing Dummy Kernel and using Trickster Mod app to lower GPU clock to 304mhz and min CPU clock to 100+MHz?
edit: or change the governor as for me some governors cause my phone to run at my max clock speed non stop
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Hey..i changed to dummy kernel and it works fine now. No heating up.
Thanks a lot..:good:
Related
I flashed CM10 a3 with for vivos kernel and 3D performance is really bad... Last time with xperiaICE v3.1, I got 2235 in quadrant 3D test with CWG kernel (i think)
So are there any kernel for gaming?
Sent from my GT-I8150 using xda app-developers app
Our android development have JB maxmem kernel I think maxmem is most suitable for gaming
Sent from my GT-I8150 using xda premium
Thnks!
ipromeh said:
Our android development have JB maxmem kernel I think maxmem is most suitable for gaming
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Thanks! I flashed the PRIVATE kernel and when i play temple run, it freezes and gave me a pop sound... I can't do anything so i pulled out the battery and restart... So i'm going to flash the MAXMEM kernel!
TiTAN-O-One said:
I flashed CM10 a3 with for vivos kernel and 3D performance is really bad... Last time with xperiaICE v3.1, I got 2235 in quadrant 3D test with CWG kernel (i think)
So are there any kernel for gaming?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Actually though, use stock.
+ Seeders
+ KSM
+ Disable CPU rendering.
You mean stock kernel on CM10? Or what?
Sent from my GT-I8150 using xda app-developers app
Both
Sent from my GT-I8150 using xda premium
TiTAN-O-One said:
You mean stock kernel on CM10? Or what?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Stock kernel on CM10. When you wish to game simply overclock min frequency to 768 and max to 1401 and set governor to performance.
Why performance? Yr device may be very very hot
Sent from my GT-I8150 using xda premium
ipromeh said:
Why performance? Yr device may be very very hot
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
In JB its slightly better. Using ondemand is not quite good though. At the very least use interactive.
KiD3991 said:
Stock kernel on CM10. When you wish to game simply overclock min frequency to 768 and max to 1401 and set governor to performance.
Click to expand...
Click to collapse
Be careful... the performance governor basically runs your CPU at MaxFreq all the time.
Except during Deep Sleeps.
pepoluan said:
Be careful... the performance governor basically runs your CPU at MaxFreq all the time.
Except during Deep Sleeps.
Click to expand...
Click to collapse
Heh Due to personal reasons I rarely exceed 15-20 minutes gaming time. And I have a handy switch between my battery friendly profile and this gaming one.
KiD3991 said:
Actually though, use stock.
+ Seeders
+ KSM
+ Disable CPU rendering.
Click to expand...
Click to collapse
What's KSM
imadiu said:
What's KSM
Click to expand...
Click to collapse
Kernel Samepage Merging... you can find it under the settings/performance/memory management
Sent from my GT-I8150 using xda app-developers app
Thnks!
I tried all and it seems ok... Now, just an experiment, i'm going to try PAC MAN JB ROM... Just to see if there are any perfomance difference...
I am using cm10 alpha 3 with forvivo v2 maxmem kernel.
subway surfers lags in my phone.
how can i disable CPU rendering ?
CPU rendering? What I know is Force GPU rendering and in order to disable that just go settings and under the Developer Option, scroll down till you see a check box and Force GPU Rendering then untick it... I thought its not ticked by default?
Sent from my GT-I8150 using xda app-developers app
Disable CPU rendering is a flashable file found in Android Developments. Its quite old but gold. Enable KSM at memory settings under Performance. Also enable 16bit transparency but disable surface dithering.
http://forum.xda-developers.com/showthread.php?t=1932047
Here you go, this is the thread.
Sent from my GT-I8150 using xda app-developers app
I see that when running the neak kernel on the uNeak app, theres a section where there are steps for the GPU clock speeds. To oc do you just raise the last step or what? Do I have to add a step if so how do I add one?
Also what is the highest clock you guys have run GPU up to on the note 2? On my n7, I ran it up to 700mhz without issues and 750mhz with occasional lockups
I'd like to do this on carbon with the kernel it comes with if possible.
Sent from my GT-N7105 using Tapatalk 2
Bump?
Sent from my SGH-T889 using Tapatalk 2
nemesis93 said:
I see that when running the neak kernel on the uNeak app, theres a section where there are steps for the GPU clock speeds. To oc do you just raise the last step or what? Do I have to add a step if so how do I add one?
Also what is the highest clock you guys have run GPU up to on the note 2? On my n7, I ran it up to 700mhz without issues and 750mhz with occasional lockups
I'd like to do this on carbon with the kernel it comes with if possible.
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
I have OC'd up to 800MHz, but I usually keep it at 733MHz and underclock the CPU a bit. I don't think the Neak kernel supports OC'ing of any kind. You're better of with Perseus in that regards. By flashing the kernel the STweaks app is also automatically flashed and you can change settings from there.
Sent from my SGH-T889 using Tapatalk 2
minhajmsd said:
I have OC'd up to 800MHz, but I usually keep it at 733MHz and underclock the CPU a bit. I don't think the Neak kernel supports OC'ing of any kind. You're better of with Perseus in that regards. By flashing the kernel the STweaks app is also automatically flashed and you can change settings from there.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Oc is supported for the gpu in the neak I wanna know if its possible to add a step instead of overclocking every step or just the last step
Cpu oc is not available though.
Sent from my SGH-T889 using Tapatalk 2
Hello All,
I can't seem to find the location on this ROM that allows you to change the governor settings... I swear I've looked everywhere!
i dont use that ROM but just FYI, kernel control features may not be built into it. as a matter of fact, a lot of ROMs dont have any built in kernel setting controls. where you using it before and it had it? saw a user running slimbean this morning with ktoonsez kernel. full control
Probably...
xBeerdroiDx said:
i dont use that ROM but just FYI, kernel control features may not be built into it. as a matter of fact, a lot of ROMs dont have any built in kernel setting controls. where you using it before and it had it? saw a user running slimbean this morning with ktoonsez kernel. full control
Click to expand...
Click to collapse
It's the kernel that came with the ROM, 3.4.41-slim-g846750a. I just read of people talking about changing their governors and wanted to give it a try..
i use (and only use) ktoonsez kt747 kernel with any ROM i am on (tasks latest currently). it comes packaged with an app that allows me to select and make governor and scheduler adjustments as well as tweak many other things in order to improve stability and battery life. highly recommend.
You can enable the developers settings by going into settings>about phone>and tap on build number 6 or 7 times and that will unlock the performance options
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Thanks for all the help guys. I activated the developer options, but there are still no governor settings. I think I'll try flashing the KT rom suggested above.
Sent from my SAMSUNG-SGH-I747 using xda premium
Did u try tapping performance >OK and then the option to change I/o scheduler or the option to change CPU governor and clock speed? It will be there
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
drs1og said:
Did u try tapping performance >OK and then the option to change I/o scheduler or the option to change CPU governor and clock speed? It will be there
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
DOH! There it is! THANKS!!!
I suggest asswax and row, good performance and battery life!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
hey guys recently i have noticed something while benchmarking.....my max cpu frequency is locked at 1.3 ghz...i use xm 305 with arhd 21 and if i set my max freq to 1.5 ghz with performance governor on so it should clock my cpu to 1.5 ghz regardless what i do right????but my cpu is still displayed to be at 1.3 ghz(its displaying in trickster app info page)
i tried setting min freq to 1.5 ghz and it is still clocked at 1.3 ghz???
because of that i am kinda lagging in vice city and getting a little low score in benchmarking....
so should i reflash the kernel??or use different app?
Turn power saving off
Sent from my HTC One X using xda app-developers app
Stefan0vic said:
Turn power saving off
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
it is off -_-...still turned on and off again and my phone is still at 1.3 ghz -.-
aseferfan said:
it is off -_-...still turned on and off again and my phone is still at 1.3 ghz -.-
Click to expand...
Click to collapse
if you use Set-Cpu see if u have some Profile on that cap cpu at 1.3Ghz
It's XM305 that is at fault. On ARHD21 and XM305 I, and others, have frequency locked at 1.3GHz.
XMister isn't available until September I think when he should return.
Change kernel and all should be well.
Tigerlight said:
It's XM305 that is at fault. On ARHD21 and XM305 I, and others, have frequency locked at 1.3GHz.
XMister isn't available until September I think when he should return.
Change kernel and all should be well.
Click to expand...
Click to collapse
ah,thought so.......
so i guess all xm version have this problem?or is there a version which doesnt have this...?
also your using trip's kernel...is this the thread?
http://forum.xda-developers.com/showthread.php?t=2307051
gonna try trips kernel
aseferfan said:
ah,thought so.......
so i guess all xm version have this problem?or is there a version which doesnt have this...?
also your using trip's kernel...is this the thread?
http://forum.xda-developers.com/showthread.php?t=2307051
gonna try trips kernel
Click to expand...
Click to collapse
No, not all of them do. I know for a FACT #285 works fine because I was using that before #305.
I tested #303 and #304 and they had the same issue.
Beyond that I don't know.
I tested Trip's NEXT Tegra 4, very nice and fast, but found the battery usage a little high and it's a little light on features, no S2W or LP OC for example.
ATM I am using n3okernel v44 and very happy with it.
Tigerlight said:
No, not all of them do. I know for a FACT #285 works fine because I was using that before #305.
I tested #303 and #304 and they had the same issue.
Beyond that I don't know.
I tested Trip's NEXT Tegra 4, very nice and fast, but found the battery usage a little high and it's a little light on features, no S2W or LP OC for example.
ATM I am using n3okernel v44 and very happy with it.
Click to expand...
Click to collapse
ah,thanks for the info :good:
guess i will try n3o's ncx and trip kernel
aseferfan said:
ah,thanks for the info :good:
guess i will try n3o's ncx and trip kernel
Click to expand...
Click to collapse
Try trickster mod to change the cpu speed.
Sent from my HTC One X using xda app-developers app
treebill said:
Try trickster mod to change the cpu speed.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Trickster, SetCPU, fauxClock, System Tuner, they will all let you SET max CPU speed to 1.5GHz but there is something in the kernel clock-locking some CPU's at 1.3GHz and until XMister returns...
DISCLAIMER: I take absolutely no responsibility for any possible damage to your device.
The settings and values I post could potentially break your device due to massive overheating and I will detail which ones.
VIDEO GUIDE IN POST #3
To unlock CPU/GPU Overclocking:
In /system/bin, rename mpdecision to mpdecision.back and remove permissions.
In /system/bin, rename thermald to thermald.back and remove permissions.
Replace your thermald.conf in /system/etc with the one I posted in the downloads and set permissions.
--unsure if this step is needed--
In TricksterMod, after a reboot, you should no longer see MPDecision. Turn on intelliplug. There is also an MP-Decision Control. Go into it and set both options that are on to off.
WIP
Stable voltages for 162MHz-1944MHz PVS 1+
81MHz - 600mV
162MHz - 625mV
216MHz - 650mV
270MHz - 675mV
324MHz - 700mV
378MHz - 725mV
384MHz - 750mV
486MHz - 775mV
594MHz - 800mV
702MHz - 825mV
810MHz - 850mV
918MHz - 875mV
1026MHz - 900mV
1134MHz - 925mV
1242MHz - 950mV
1350MHz - 975mV
1458MHz - 1000mV
1566MHz - 1037.5mV
1674MHz - 1062.5mV
1728MHz - 1087.5mV
1782MHz - 1112.5mV
1836MHz - 1137.5mV
1890MHz - 1162.5mV
1944MHz - 1162.5mV
1998MHz - 1175mV
2052MHz - 1175mV
2106MHz - 1187.5mV
2133MHz - 1200mV
2160MHz - 1225mV
2214MHz - 1250mV
2295MHz - 1275mV
Downloads
Modified thermald.conf - https://app.box.com/s/9m0id573ayuojqteuri8
Here's a guide on how to prevent your max frequency CPU frequency from resetting to 1728MHz and GPU resetting to 320MHz.
https://www.youtube.com/watch?v=ue2K943prVs&feature=youtube_gdata_player
Tasker Scripts - Will upload once I make a guide for them.
Hi i tryed it out when i was on Bam about two days ago, i changed permissions and replaced file but it didnt unlock OC. Is there something i missed, im using an e988
You also need to change the name and permissions of mpdecision in /system/bin.
I would not encourage going higher then 1.89GHz. A few of us had some nasty side effects and had to send in for a new phone.
Sent from my LG-E980 using XDA Premium 4 mobile app
What do I rename the mpdesicion file to? And do I change permissions to rw r r
Sorry I'm a bit noob
riki126 said:
What do I rename the mpdesicion file to? And do I change permissions to rw r r
Sorry I'm a bit noob
Click to expand...
Click to collapse
Remove all permissions and rename it bak.mpdecision.bak
Sent from my Optimus G Pro using xda app-developers app
Is it compatible with Stock Rom as well?
fosunite said:
Is it compatible with Stock Rom as well?
Click to expand...
Click to collapse
One is for 4.3 and one is for 4.4... So no
Sent from my Optimus G Pro using xda app-developers app
Ok so I've done everything you've told me and still OC hasn't unlocked. I'm using bam 4.4.2 ROM on e988. I replaced file and did permissions and made mpdesicion to mpdesicion.back and removed permissions. Is there anything else? Thanks
riki126 said:
Ok so I've done everything you've told me and still OC hasn't unlocked. I'm using bam 4.4.2 ROM on e988. I replaced file and did permissions and made mpdesicion to mpdesicion.back and removed permissions. Is there anything else? Thanks
Click to expand...
Click to collapse
I forgot to mention changing thermald to thermald.back and removing permissions in /system/bin as well. Didn't think this step was needed with the modified thermald.conf but I was wrong.
Sent from my LG-E980 using XDA Premium 4 mobile app
You da man, Neroga! Thanx for the new voltages. Imma try em out
Sent from my e980 using xda app-developers app
Nigglenuts said:
You da man, Neroga! Thanx for the new voltages. Imma try em out
Sent from my e980 using xda app-developers app
Click to expand...
Click to collapse
Not a problem. They're gonna change frequently over this next week until I get them perfectly stable as low as I can push lol.
Sent from my BAM 4.4 LG-E980
Neroga said:
Not a problem. They're gonna change frequently over this next week until I get them perfectly stable as low as I can push lol.
Sent from my BAM 4.4 LG-E980
Click to expand...
Click to collapse
Word up! It just gets better hahaha
Sent from my e980 using xda app-developers app
I factory reset and reinstalled bam and tryed it again but its still not unlocking OC and in trickster mod theres no option for intellidemand :/
riki126 said:
I factory reset and reinstalled bam and tryed it again but its still not unlocking OC and in trickster mod theres no option for intellidemand :/
Click to expand...
Click to collapse
This thread is meant for OC'd kernels which we only have 1 available for 4.3 and 4.4 ROMs, here:
http://forum.xda-developers.com/showthread.php?p=50079215
The steps are meant for "unlocking" the ability to OC so they don't reset back to 1728MHz.
If we get more OC'd kernels that play nicely with mpdecision and thermald, these steps won't even be needed.
--edit--
Anyone think I should start making video guides for things? Really just looking for a way to test the screen recording option with audio through the mic on BAM. I could definitely pack a lot more information into 3-5minute videos than I'd care to type out.. xD
Sent from my BAM 4.4 LG-E980
Neroga said:
This thread is meant for OC'd kernels which we only have 1 available for 4.3 and 4.4 ROMs, here:
http://forum.xda-developers.com/showthread.php?p=50079215
The steps are meant for "unlocking" the ability to OC so they don't reset back to 1728MHz.
If we get more OC'd kernels that play nicely with mpdecision and thermald, these steps won't even be needed.
--edit--
Anyone think I should start making video guides for things? Really just looking for a way to test the screen recording option with audio through the mic on BAM. I could definitely pack a lot more information into 3-5minute videos than I'd care to type out.. xD
Sent from my BAM 4.4 LG-E980
Click to expand...
Click to collapse
Yeah. Sure sounds like a great idea
Sent from my LG-E980 using Tapatalk
Just thought I'd share this.
Running the 1/26 BAM build
CPU 162MHz - 1944MHz
GPU 531MHz
Sent from my BAM 4.4 LG-E980
Neroga said:
Just thought I'd share this.
Running the 1/26 BAM build
CPU 162MHz - 1944MHz
GPU 531MHz
Sent from my BAM 4.4 LG-E980
Click to expand...
Click to collapse
I've never tried pushing the GPU that far... But when I set it to 450, I get equivalent scores
Sent from my Optimus G Pro using xda app-developers app
Nigglenuts said:
I've never tried pushing the GPU that far... But when I set it to 450, I get equivalent scores
Sent from my Optimus G Pro using xda app-developers app
Click to expand...
Click to collapse
That's with using some more battery friendly settings. What do you get under GPU 3D graphics? I got 7680. If it's about the same I'll probably drop mine down lol.
Sent from my BAM 4.4 LG-E980