Best gaming kernel for Jelly Bean? - Samsung Galaxy W I8150

I flashed CM10 a3 with for vivos kernel and 3D performance is really bad... Last time with xperiaICE v3.1, I got 2235 in quadrant 3D test with CWG kernel (i think)
So are there any kernel for gaming?
Sent from my GT-I8150 using xda app-developers app

Our android development have JB maxmem kernel I think maxmem is most suitable for gaming
Sent from my GT-I8150 using xda premium

Thnks!
ipromeh said:
Our android development have JB maxmem kernel I think maxmem is most suitable for gaming
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Thanks! I flashed the PRIVATE kernel and when i play temple run, it freezes and gave me a pop sound... I can't do anything so i pulled out the battery and restart... So i'm going to flash the MAXMEM kernel!

TiTAN-O-One said:
I flashed CM10 a3 with for vivos kernel and 3D performance is really bad... Last time with xperiaICE v3.1, I got 2235 in quadrant 3D test with CWG kernel (i think)
So are there any kernel for gaming?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Actually though, use stock.
+ Seeders
+ KSM
+ Disable CPU rendering.

You mean stock kernel on CM10? Or what?
Sent from my GT-I8150 using xda app-developers app

Both
Sent from my GT-I8150 using xda premium

TiTAN-O-One said:
You mean stock kernel on CM10? Or what?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Stock kernel on CM10. When you wish to game simply overclock min frequency to 768 and max to 1401 and set governor to performance.

Why performance? Yr device may be very very hot
Sent from my GT-I8150 using xda premium

ipromeh said:
Why performance? Yr device may be very very hot
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
In JB its slightly better. Using ondemand is not quite good though. At the very least use interactive.

KiD3991 said:
Stock kernel on CM10. When you wish to game simply overclock min frequency to 768 and max to 1401 and set governor to performance.
Click to expand...
Click to collapse
Be careful... the performance governor basically runs your CPU at MaxFreq all the time.
Except during Deep Sleeps.

pepoluan said:
Be careful... the performance governor basically runs your CPU at MaxFreq all the time.
Except during Deep Sleeps.
Click to expand...
Click to collapse
Heh Due to personal reasons I rarely exceed 15-20 minutes gaming time. And I have a handy switch between my battery friendly profile and this gaming one.

KiD3991 said:
Actually though, use stock.
+ Seeders
+ KSM
+ Disable CPU rendering.
Click to expand...
Click to collapse
What's KSM

imadiu said:
What's KSM
Click to expand...
Click to collapse
Kernel Samepage Merging... you can find it under the settings/performance/memory management
Sent from my GT-I8150 using xda app-developers app

Thnks!
I tried all and it seems ok... Now, just an experiment, i'm going to try PAC MAN JB ROM... Just to see if there are any perfomance difference...

I am using cm10 alpha 3 with forvivo v2 maxmem kernel.
subway surfers lags in my phone.
how can i disable CPU rendering ?

CPU rendering? What I know is Force GPU rendering and in order to disable that just go settings and under the Developer Option, scroll down till you see a check box and Force GPU Rendering then untick it... I thought its not ticked by default?
Sent from my GT-I8150 using xda app-developers app

Disable CPU rendering is a flashable file found in Android Developments. Its quite old but gold. Enable KSM at memory settings under Performance. Also enable 16bit transparency but disable surface dithering.

http://forum.xda-developers.com/showthread.php?t=1932047
Here you go, this is the thread.
Sent from my GT-I8150 using xda app-developers app

Related

Best cpu manager app?

What is the best cpu manager app, to use governor, modified frecuency and that things?
Sorry for my english
i use setCPU to change my cpu settings
I use setCPU too.Work perfectly
Well,It Depends...!
Well,there are lots of cpu manager apps in market but if you ask me which is the best then let me know :
What's your current rom?
Is your device rooted?
Set CPU! !!!
Wrong section btw
I use antutu CPU master for CPU profiles uses less memory
™®© °_° *-*show off is immature *-*
°_° ™®©
I use set CPU
Sent from my GT-S5830
peter_dizai said:
Well,there are lots of cpu manager apps in market but if you ask me which is the best then let me know :
What's your current rom?
Is your device rooted?
Click to expand...
Click to collapse
I stay using ComfortStock v2[ICS], but I will change this for LegendStock Rom v3 this night
Yes, is rooted.
thx for response =)
XDemianX said:
What is the best cpu manager app, to use governor, modified frecuency and that things?
Sorry for my english
Click to expand...
Click to collapse
SetCPU ftw. Peep the link on my signature to get some info on it ;D
set CPU is the best
Market search cpu.
Sent from my GT-S5830 using XDA
NoFrills best for Noobie.... Coz its easyy!
I personally use Set Cpu..
Sent from my GT-S5830 using xda premium
Set CPU, smartassV2
Set CPU
Lagfree, 864Mhz
...... Super smooth!!!
Sent from my GT-S5830 using xda premium
Set that cpu 2 tha max
SetCPU is my personal favourite.
Sent from my GT-I9003 using xda premium
pvrx said:
Set CPU
Lagfree, 864Mhz
...... Super smooth!!!
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
And the battery a crap xD
I use SetCPU, smartassv2
Sent from my SG Ace
Battery is made to USE.... not save...
I like performance, n I pay at the cost of battery!
My battery lasts for max 18Hrs.... That is enough for me!
Sent from my GT-S5830 using xda premium
ANDROIDCUSTOMIZe said:
Set that cpu 2 tha max
Click to expand...
Click to collapse
My CPU goes 921Mhz.... Max
Gets boot on 940Mhz!!
And freezes on 1.036 Mhz... Lol
Sent from my GT-S5830 using xda premium
SetCPU ftw!

[Kernel][JB/ICS/AOSP][Linaro] Covenant Kernel RC3-Voice Fix {OC/UV} 1.4 ghz {12-1-12}

Covenant Kernel RC3​
This is an all new kernel for AOSP(JB or ICS) roms built from source.
I have decided to take over building an all new kernel for CM10 and other AOSP roms to reduce the work load from the greatergood.
But make no mistake about it, thegreatergood helped tremendously in getting me where i am on overclocking and voltage control.
So smack his thanks button as much as possible.
The covenant kernel is the first of many new releases from my newly formed team, The Covenant. Memebers consisting of- "thegreatergood",
"Bo0st", "terinfire", and myself. We are still recruiting members who can contribute in there own skilled way. So if you think you would like to, and can contribute to the Covenant team hit me or one of the other team members up.
Features
OC/UV up to 1400 mhz
OC Range; 1400, 1200, 1100, 1000, 912, 816, 760, 608, 456, 312, 216
GOVERNORS:
SmartassV2
Interactive
Conservative
Ondemand
Powersave
Userspace
Performance
I/O Schedulers:
Noop
Deadline
Cfq
sio(default)
Click to expand...
Click to collapse
Credits
Thegreatergood
terinfire
roothorick(Camera)
Bo0st
DrMario
dbrannon
Raw0w0
And the XDA and glide community!
Click to expand...
Click to collapse
Pac-man users flash last kernel to fix camera
Click to expand...
Click to collapse
Covenant-kernel-V3 Changelog
Camera Fix
Click to expand...
Click to collapse
Covenant-Kernel-V2 Changelog
Removed deadline and cfq I/O schedulers
Fix Microphone and voice search Cm10
OC 1400, 1300, 1200, 1000, 912, 816, 760, 608, 456, 312, 216
Click to expand...
Click to collapse
Downloads
Mine!
Sent from my SGH-I927 using xda premium
Boots up well..
No Boot animation..
slightly longer boot time..(Or feels like, as its only Samsung from start to end)
wipes up cache during flash..
Usually not seen it while installing any kernel..takes a lot of time to rebuild..
Can you remove it.. ?
will OC and post benchmark results later..
VinayS said:
Boots up well..
No Boot animation..
slightly longer boot time..(Or feels like, as its only Samsung from start to end)
wipes up cache during flash..
Usually not seen it while installing any kernel..takes a lot of time to rebuild..
Can you remove it.. ?
will OC and post benchmark results later..
Click to expand...
Click to collapse
Um yes.. boot animation runs.. this only works on CM10.. I tested it 25 times. Booted up in seconds and boot animation ran every time. This will not work on stock ICS based ROMs.
Sent from my SGH-I927 using xda premium
dman3285 said:
Um yes.. boot animation runs.. this only works on CM10.. I tested it 25 times. Booted up in seconds and boot animation ran every time. This will not work on stock ICS based ROMs.
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
Is compatible with lite rom? or only is for CM10?
lorddavid said:
Is compatible with lite rom? or only is for CM10?
Click to expand...
Click to collapse
As the title says.. AOSP.. only for CM10, CM9, AOCP, AOKP, PAC-man, ect, ect... ONLY AOSP roms
Sent from my SGH-I927 using xda premium
dman3285 said:
As the title says.. AOSP.. only for CM10, CM9, AOCP, AOKP, PAC-man, ect, ect... ONLY AOSP roms
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
aaa ok, thanks
dman3285 said:
Um yes.. boot animation runs.. this only works on CM10.. I tested it 25 times. Booted up in seconds and boot animation ran every time. This will not work on stock ICS based ROMs.
Click to expand...
Click to collapse
oh, Time to change back..i am on stock ICS..
In Stock ICS,
Not able to pass lockscreen from second boot onwards..
phone gets struck and hangs.. also does not charge..
VinayS said:
oh, Time to change back..i am on stock ICS..
In Stock ICS,
Not able to pass lockscreen from second boot onwards..
phone gets struck and hangs.. also does not charge..
Click to expand...
Click to collapse
That's because this is Only for AOSP ROMs.. clearly stated in title and OP..
Sent from my SGH-I927 using xda premium
so this really a teaser for upcoming update to the cm10/10.1 and aosp roms
What do you mean by "wakelock enabled" in the op?
Sent from my SAMSUNG-SGH-I727 using xda premium
If I need to explain it you don't need to flash it.
Means you can enable wake lock in settings if supported..
Sent from my GT-I9103 using xda premium
Just a quick question! overclocked to 1400mhz? is that safe? I was having trouble with litekernel clocked to 1.28!! and heat issues while running google maps. and how does that affect the battery life?
dbrannon79 said:
Just a quick question! overclocked to 1400mhz? is that safe? I was having trouble with litekernel clocked to 1.28!! and heat issues while running google maps. and how does that affect the battery life?
Click to expand...
Click to collapse
Its completely stable.. been running it at 1400 with smartassV2 and has been flawless .. not even gotten warm...
Sent from my GT-I9103 using xda premium
dman3285 said:
Its completely stable.. been running it at 1400 with smartassV2 and has been flawless .. not even gotten warm...
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I wish I could use it in Ice Pop rom too! But it's a modified stock rom!
Sent from my SGH-I927 using Tapatalk 2
This was just a quick run on quadrant OC at 1400, UV at 750
Sent from my SGH-I927 using xda premium
dman3285 said:
If I need to explain it you don't need to flash it.
Means you can enable wake lock in settings if supported..
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Do you mean these wakelocks? If yes, I doubt that there is any Android release having such an option. If you disable wakelocks, almost nothing will work on the system.
dman3285 said:
If I need to explain it you don't need to flash it.
Means you can enable wake lock in settings if supported..
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I am not a noob at this I've been flashing roms for a long time and I've never seen the tweak wake lock enabled and I've only seen wake lock referred to as apps or other things keeping your phone awake and killing battery
I'm not trying to be rude i was just curious
Sent from my SAMSUNG-SGH-I727 using xda premium
dman3285 said:
This was just a quick run on quadrant OC at 1400, UV at 750
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
Looks awesome! Is that 750mv at 1400Mhz? I cannot imagine that would be possible, the lowest voltage at the highest frequency. If it is, then the covenant really does work miracles!
Sent from my SGH-I927 using xda app-developers app
What are you using to oc? I am using antutu but can't seem to find 750 Anywhere
Sent from my SGH-I927 using xda app-developers app

[Q] The best kernel galaxy w

What's the best kernel for gaming instead of saving power battery? i'm using CM 9 beta 4 right now.. thanks
Dio Galih said:
What's the best kernel for gaming instead of saving power battery? i'm using CM 9 beta 4 right now.. thanks
Click to expand...
Click to collapse
I'm using Yoon.Kernel 1.6 and it's work good :good:
Set it to interactive then install Seeder. Works like a damn charm.
eza azami said:
I'm using Yoon.Kernel 1.6 and it's work good :good:
Click to expand...
Click to collapse
Thanks te:good: but how's about battery life? is it stable with it?
KiD3991 said:
Set it to interactive then install Seeder. Works like a damn charm.
Click to expand...
Click to collapse
Seeder from google market bro? thanks mate..
Dio Galih said:
Thanks te:good: but how's about battery life? is it stable with it?
Seeder from google market bro? thanks mate..
Click to expand...
Click to collapse
No. Its free for XDA users . Go to the search all forums search tab and search for it. CHEERS!
Interactive is my first choice if it comes to the original kernel.
Ohh i see.. thanks so much
What I/O scheduler for Interaxtive Governor?
"Back to CM9" -TiTAN
Is it just me or using a custom kernel seems to be slower compared to Arco's stock kernel?
allkpop said:
Is it just me or using a custom kernel seems to be slower compared to Arco's stock kernel?
Click to expand...
Click to collapse
It depends. Sometimes user feel faster with a custom kernel but sometimes not. It depends on some users configure the custom kernels.
For me using smartassv2 + sio scheduler even on 1ghz max freq it feels faster than stock ondemand / conservative. And sometimes it affects from the kernel developer who really have finished optimised their custom kernel or not.
Sent From Viperized Beats Sensation XE
I believe that we have a great CPU with 1.4 Ghz ,, So all the games problems is comming from the RAM.. So i think that Yoon Maxmem Kernel (4xx Mb RAM) Is the best for gamming ,, but remember it don't have working camera
Sent from my GT-I8150 using xda app-developers app
i guess arco cm9 RC4 3.0 kernel is very good.
:good:

[Q] cm9 or cm10 or cm10.1????????

I'm looking for the best For taking picture and play game
sry for my bad eng
I'm using CM9 rc2 + Honeyx Kernel and some tweaks and mods, with this combination I get 6358 points on antutu benchmark, one of the bigger scores for this phone. When I overclock the CPU to 1.8GHz and put Aggressive in Seeder, I'm enabled to run all games I want without lags.
This rom is awesome with pics too.
Sent from my GT-I8150 using Tapatalk 4 Beta
FelixMG said:
I'm using CM9 rc2 + Honeyx Kernel and some tweaks and mods, with this combination I get 6358 points on antutu benchmark, one of the bigger scores for this phone. When I overclock the CPU to 1.8GHz and put Aggressive in Seeder, I'm enabled to run all games I want without lags.
This rom is awesome with pics too.
Sent from my GT-I8150 using Tapatalk 4 Beta
Click to expand...
Click to collapse
You did the test with antutu at 1.8 GHz? And which tweaks and mods are you using? And your phone is often Hot or not?
Sent from my GT-I8150 using xda app-developers app
FelixMG said:
I'm using CM9 rc2 + Honeyx Kernel and some tweaks and mods, with this combination I get 6358 points on antutu benchmark, one of the bigger scores for this phone. When I overclock the CPU to 1.8GHz and put Aggressive in Seeder, I'm enabled to run all games I want without lags.
This rom is awesome with pics too.
Sent from my GT-I8150 using Tapatalk 4 Beta
Click to expand...
Click to collapse
why cm9 rc2 not eol
walter98100 said:
You did the test with antutu at 1.8 GHz? And which tweaks and mods are you using? And your phone is often Hot or not?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Yes! I'm using greenify and seeder, and Touchwiz mods.
My phone is rarely hot, almost all time he's normal.
midou16 said:
why cm9 rc2 not eol
Click to expand...
Click to collapse
I don't know, I'm kinda lazy to change it, restore all my apps, etc. Haha
Sent from my GT-I8150 using Tapatalk 4 Beta
with 1.4 GHz i reach 5800 or 5700 on oneofakind hybrid 25.1 .. but my phone costantly Hot... so i don't know if would be better go on JB or this cm9 rc2.. do u deleted some System apps or not?
Sent from my GT-I8150 using xda app-developers app
walter98100 said:
with 1.4 GHz i reach 5800 or 5700 on oneofakind hybrid 25.1 .. but my phone costantly Hot... so i don't know if would be better go on JB or this cm9 rc2.. do u deleted some System apps or not?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
All JB roms that I've tested don't gave me the stability and smoothness like CM9 rc2 gave.
Yes, I deleted some system apps.
Sent from my GT-I8150 using Tapatalk 4 Beta
last question.. do u enabled 16 bit disabled dithering zram force gpu rendering ?
Sent from my GT-I8150 using xda app-developers app
FelixMG said:
All JB roms that I've tested don't gave me the stability and smoothness like CM9 rc2 gave.
Yes, I deleted some system apps.
Sent from my GT-I8150 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The same for me. That´s also the reason why I finally created the 7up kernel for RC2. The only reason I moved to CM9 final was because many people requested a 3.0.x 7up kernel for it. The only advantage the final is having is MTP and OTG but well. I´m not using OTG and MTP is still sometimes causing troubles. Therefore I still am using mass storage mode in CM9 final.
walter98100 said:
last question.. do u enabled 16 bit disabled dithering zram force gpu rendering ?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
I enabled 16 bit, disabled dithering, disabled zram and disabled gpu rendering.
honeyx said:
The same for me. That´s also the reason why I finally created the 7up kernel for RC2. The only reason I moved to CM9 final was because many people requested a 3.0.x 7up kernel for it. The only advantage the final is having is MTP and OTG but well. I´m not using OTG and MTP is still sometimes causing troubles. Therefore I still am using mass storage mode in CM9 final.
Click to expand...
Click to collapse
Exactly!
Sent from my GT-I8150 using Tapatalk 4 Beta

What is TWEAK??

Hey all can anyone tell me what is tweak? Means?
And i'm on cm11 am i need it?
And how to do it if?
Sent from my GT-I9082 using XDA Premium 4 mobile app
Showman2020 said:
Hey all can anyone tell me what is tweak? Means?
And i'm on cm11 am i need it?
And how to do it if?
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Tweak is of optimization. Tweak can means Overclock, Debloat, RAM optimization, etc
On cm11 tweak (Overclock) is optional because not everyone need high-speed CPU. but Ram optimization in needed by me.
black87 said:
Tweak is of optimization. Tweak can means Overclock, Debloat, RAM optimization, etc
On cm11 tweak (Overclock) is optional because not everyone need high-speed CPU. but Ram optimization in needed by me.
Click to expand...
Click to collapse
Thanks so much
So it's good to make it?
How can i make it for my grand cm11
Sent from my GT-I9082 using XDA Premium 4 mobile app
Showman2020 said:
Thanks so much
So it's good to make it?
How can i make it for my grand cm11
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
For overclock just flash one of the kernel availabe for CM11 (k2wl's Evolution kernel or xenon92's Nebula kernel)
then press the build number in "about phone" 7-10 times (im forgot). The performance setting will appear in settings menu (not "about phone"). Grant superuser if asked. then change the governor or cpu clock. JUST, dont overclock your cpu too high because its only drain your battery quickly and shorten the CPU life
black87 said:
For overclock just flash one of the kernel availabe for CM11 (k2wl's Evolution kernel or xenon92's Nebula kernel)
then press the build number in "about phone" 7-10 times (im forgot). The performance setting will appear in settings menu (not "about phone"). Grant superuser if asked. then change the governor or cpu clock. JUST, dont overclock your cpu too high because its only drain your battery quickly and shorten the CPU life
Click to expand...
Click to collapse
Build number ...seven times....
And nebula will include performance control app anyway
Sent from my GT-I9082 using Tapatalk
Sorry but nebulla is bad and i hate it
I reflash the rom again -.-
I was getting alot of reboots
Sent from Galaxy Grand CM11 LAST BUILD 1.1.2014
Showman2020 said:
Sorry but nebulla is bad and i hate it
I reflash the rom again -.-
I was getting alot of reboots
Sent from Galaxy Grand CM11 LAST BUILD 1.1.2014
Click to expand...
Click to collapse
I know that feel bro
Sent from my GT-I9082 using Tapatalk
Showman2020 said:
Sorry but nebulla is bad and i hate it
I reflash the rom again -.-
I was getting alot of reboots
Sent from Galaxy Grand CM11 LAST BUILD 1.1.2014
Click to expand...
Click to collapse
Yap. random reboots on Omni Rom. try Evolution kernel

Categories

Resources