Hi:
In the last day i was trying to flash the LEAK 4.1.2 build 6.2.B.0.203 , using DooMLork kernel , the problem was facing me is that my phone still do reboot after the first logo.
Then my phone turned off and i can't do any thing like flash mode or fastboot or charge of vibrate , even no led.
After like 4 hours of charging my phone show red led apear and disapear evry 20 second.
Today in the morning i can see a red led that still apear all the charging time and nothing happen.
From 2 minuits suddenly i saw that my phone turned on and show the first logo "Free Xperia" and after 5 second getted dead again and the same , only red led.
Any help to get into flashmood?
Again i had the boot logo , i tried to press VPL up + Power bottom and it do restart , tried to get 3 viberates and after i had it dead again.
Hi folks, i bricked my phone too. i was on leaked JB too and its worked like a charm. i founded an article about Chainfire so i tried but the phone went bootloop and then i red how to uninstall it. need adb mode on recovery. but the leaked twrp kernel cannot be on adb mode so i decided i flash a regular ics cwm kernel. so i flashed than tap tap tap on sony logo but nothing happened but bootloop. tried a lot times but same. so i decided i flash back the leaked twrp and flash the rom again so pressed the power and vol up until 3 vibrations it powered off and thats all. doesnt respond. cant power off cant flash mode cannot fasboot mode. now is on wall charger but nothing happen. what should i do for now? please help i love my ion especially with JB. :crying::crying::crying::crying:
edit: and its full charged because it was on wall charger while i slept :/
edit: SOLVED
i couldnt wait so i disassembled and unplugged the battery cable than plug and its working!
goodnightPal said:
Hi folks, i bricked my phone too. i was on leaked JB too and its worked like a charm. i founded an article about Chainfire so i tried but the phone went bootloop and then i red how to uninstall it. need adb mode on recovery. but the leaked twrp kernel cannot be on adb mode so i decided i flash a regular ics cwm kernel. so i flashed than tap tap tap on sony logo but nothing happened but bootloop. tried a lot times but same. so i decided i flash back the leaked twrp and flash the rom again so pressed the power and vol up until 3 vibrations it powered off and thats all. doesnt respond. cant power off cant flash mode cannot fasboot mode. now is on wall charger but nothing happen. what should i do for now? please help i love my ion especially with JB. :crying::crying::crying::crying:
edit: and its full charged because it was on wall charger while i slept :/
edit: SOLVED
i couldnt wait so i disassembled and unplugged the battery cable than plug and its working!
Click to expand...
Click to collapse
Lol i am not going to disassemble my phone. From some minuits i had my phone on and it showed Free Xperia logo but after 3 viberates i died.
I am waiting it to come on again and then i will try to flash the software without turn it off.
The $niper said:
Lol i am not going to disassemble my phone. From some minuits i had my phone on and it showed Free Xperia logo but after 3 viberates i died.
I am waiting it to come on again and then i will try to flash the software without turn it off.
Click to expand...
Click to collapse
phone is for you not you are for your phone... have a tutorial on youtube, and its safe if you are do it smartly. i was impatient.. its your choice, your phone.
goodnightPal said:
phone is for you not you are for your phone... have a tutorial on youtube, and its safe if you are do it smartly. i was impatient.. its your choice, your phone.
Click to expand...
Click to collapse
The reason why i don't want to do it because if i did it my phone will be cheaper because it will called "Fixed Phone".
Now i got the first logo again while it's connected to the PC , i tried to press VOL- but flashtool didn't detect it and came dead again.
Maybe the next time i can get into recovery , but what can i do?
The $niper said:
The reason why i don't want to do it because if i did it my phone will be cheaper because it will called "Fixed Phone".
Now i got the first logo again while it's connected to the PC , i tried to press VOL- but flashtool didn't detect it and came dead again.
Maybe the next time i can get into recovery , but what can i do?
Click to expand...
Click to collapse
if its not working now is cheaper. but you have to tell nobody that you disassembled it to fix ur phone.
but if you have time try this one:
http://forum.xda-developers.com/showpost.php?p=31618617&postcount=32
Thats what i am trying to do.
Now i get my phone on again , and i got into recovery and reboot it to fastboot , flashed stock kernel.sin.
Then i turned it on and it show sony logo then i did 3 vibrates to get it off to flash a stock rom but dead again.
Now i am thinking how to get to flashmode?
The $niper said:
Thats what i am trying to do.
Now i get my phone on again , and i got into recovery and reboot it to fastboot , flashed stock kernel.sin.
Then i turned it on and it show sony logo then i did 3 vibrates to get it off to flash a stock rom but dead again.
Now i am thinking how to get to flashmode?
Click to expand...
Click to collapse
that what i tried me too, flashed stock with cwm tap tap tap but nothing happened.. once is working once not... try flash stock with twrp it is working.
Last updates:
All what i can get ofter connecting to PC for a long time is the device start up and show Sony logo then the logo disapear and reboot then do it again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again then stop booting and got dead.
Edit 1: When it show Sony logo i tried to press VOL+ and connect the usb but no fastboot , the same with flash mode.
Edit 2: When it start rebooting wave again i tried to press VOL+ and - then it got stuck with black screen , Flashtool can detect it in USB debigging off mode and it can't be turned off with the 3 vibrates trick.
Edit 3: By removing the sim card the phone turned off. Now back to the first stage with only red led and after long time connecting to PC it show Sony logo then reboot.
The $niper said:
Last updates:
All what i can get ofter connecting to PC for a long time is the device start up and show Sony logo then the logo disapear and reboot then do it again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again then stop booting and got dead.
Edit 1: When it show Sony logo i tried to press VOL+ and connect the usb but no fastboot , the same with flash mode.
Edit 2: When it start rebooting wave again i tried to press VOL+ and - then it got stuck with black screen , Flashtool can detect it in USB debigging off mode and it can't be turned off with the 3 vibrates trick.
Edit 3: By removing the sim card the phone turned off. Now back to the first stage with only red led and after long time connecting to PC it show Sony logo then reboot.
Click to expand...
Click to collapse
I think: you should turn off but when it trying turning off it goes brick, get stuck... i dont know you have to turn off manual ( with disassemble) and connenct usb and vol up because now it cannot be in fastboot or flash mode. or you should leave it to full discharge than it will turn off but it may take several weeks.
goodnightPal said:
I think: you should turn off but when it trying turning off it goes brick, get stuck... i dont know you have to turn off manual ( with disassemble) and connenct usb and vol up because now it cannot be in fastboot or flash mode. or you should leave it to full discharge than it will turn off but it may take several weeks.
Click to expand...
Click to collapse
Now it's not stuck , it's off and connecting to the charger with red led.
Than i don't know what should you do srry
Sent from my LT28h using xda app-developers app
goodnightPal said:
Than i don't know what should you do srry
Sent from my LT28h using xda app-developers app
Click to expand...
Click to collapse
No problem , thank you for trying help.
Charging for 10 hours , only red led.
while on a loop, press the volume down button and connect it to the PC. If it doesn't work, press power+vol up till it vibrates once keeping the vol down button pressed as well. if it goes into flashmode, forget everything and flash stock ftf.
on a red led situation, hold the vol down and connect it to PC. It will show no led but keep holding it for long, it will go into flashmode
Posted by Sony Xperia™ Ion via xda-premium
ARNOB said:
while on a loop, press the volume down button and connect it to the PC. If it doesn't work, press power+vol up till it vibrates once keeping the vol down button pressed as well. if it goes into flashmode, forget everything and flash stock ftf.
on a red led situation, hold the vol down and connect it to PC. It will show no led but keep holding it for long, it will go into flashmode
Posted by Sony Xperia™ Ion via xda-premium
Click to expand...
Click to collapse
I tried that to make it restart with one vibrate but no flashmode , i will try it again with holding the VOL- before i do the vibrate.
For the led when i connect it to the PC holding VOL- the red led apear , why?
**** **** **** **** **** **** me , whn it start the rebooting i pressed the VOL+ and = and the power bottom and it start to connect and dis connect again on MTP debugging off mode and after a while i got the green led and flash mode but the ftf waz compressed and while it's extracting the green led gone....
Fixed!!!!
This is small guide what to do:
1- Charge your phone with PC or wall charger until you get a stable red led (Stable led not flashing led) maybe that will take hours.
2- Now connect your phone to the PC , you will find the red led back again.
3- The idea now is that your phone will auto start after some time , you need to be holding the VOL- bottom before it start up that you can get a green led and you can flash the rom with flashtool.
Some times it got start up after like 4 minuits after you connect it to PC , and other times maybe it will take like 20 minuits to start. So you have to hold the VOL- bottom almost the time and there is no problem if you let the bottom for some seconds , but be carefull that it will suddenly boot up so you have to be holding the bottom.
If you success with rom flashing , connect your phone to the charger and wait until it will start first time and get dead , then start again normaly
Charge ur phone with wall charger (its faster than pc) until u get green led. After that, hold Vol - and connect the phone to pc.
Dear friends,
I am here in need of u guys as i am in a critical position with my xperia SL
I am based on [ROM][S, SL][JB][LB,UB][6.2.B.0.200] eXistenZ | V2 | HDR [10/06]
today this morning i have tried to install [STABLE][FINAL VERSION][Based on 6.2.B.1.96]LeOpArDx RoM V3.2 Very Smooth--Very Fast
i was able to install it but there was no mobile network connectivity after installing the ROM, So i have reset the phone back to factory settings to wipe out all the settings in the phone and restarted the phone that is where my phone locked into the boot loop now i am unable to boot the mobile. i can say that i have pressed the Power+Volume Up button and powered off the mobile after the three vibrates. If i connect my mobile with the laptop it vibrates and charges properly..
I am really need of u guys in helping me friends.. Kindly help me
Thanks in Advance...
Parani said:
Dear friends,
I am here in need of u guys as i am in a critical position with my xperia SL
I am based on [ROM][S, SL][JB][LB,UB][6.2.B.0.200] eXistenZ | V2 | HDR [10/06]
today this morning i have tried to install [STABLE][FINAL VERSION][Based on 6.2.B.1.96]LeOpArDx RoM V3.2 Very Smooth--Very Fast
i was able to install it but there was no mobile network connectivity after installing the ROM, So i have reset the phone back to factory settings to wipe out all the settings in the phone and restarted the phone that is where my phone locked into the boot loop now i am unable to boot the mobile. i can say that i have pressed the Power+Volume Up button and powered off the mobile after the three vibrates. If i connect my mobile with the laptop it vibrates and charges properly..
I am really need of u guys in helping me friends.. Kindly help me
Thanks in Advance...
Click to expand...
Click to collapse
You are on the right track. Press and hold the volume up+power button until you get three vibrations. Then use Flashtool and flash the latest stock ftf file. When prompted to connect your phone, connect it while holding the volume down key. You will get a green led on your phone and the flashing process should start. Once it is complete, disconnect your phone and start it normally,
Regards,
abcdjdj
abcdjdj said:
You are on the right track. Press and hold the volume up+power button until you get three vibrations. Then use Flashtool and flash the latest stock ftf file. When prompted to connect your phone, connect it while holding the volume down key. You will get a green led on your phone and the flashing process should start. Once it is complete, disconnect your phone and start it normally,
Regards,
abcdjdj
Click to expand...
Click to collapse
Bro, u r genies, it worked like a magic.. I thought i have to go to service center but i just followed it as u said and i am back now.. thanks a ton buddy..
Cant find flashtool
i am not able to find a proper flash tool!!
SOLVED : BATTERY WAS DRAINED AT THE MAX, never seen that.
Hello all,
This kind of discussion has already been mentionned but i didn't found anything (may be bad search).
After flashing a rom (PureIon rom) through CMW and without the requiered kernel (in this case the .211 or something like that was needed) the phone was stuck on boot "Sony".
A this moment i cannot enter neither in flash mode or fastboot mode.
If i keep it on the wall poser supply, it stays turned off with red led (not blinking, constant), after a while he automatically turns on and stuck on the Sony logo.
If I just shut off (simple keep power+volume up) there is no way to turn on the phone, i have to re-plug the phone against the wall power supply and wait.
The hard reset (3 vibrations after keeping 10sec the power+vol up) is not working anymore
Someone has already had this king of behaviour ?
Thank you in advance.
Regards.
hello everybody
I have xperia s with unlocked boatloader
I was downgrading from paranoid android 4.6 to HUSIXPERIA V3
I followed the instructions pretty well
after i finish installing the rom and i was rebooting to start the new rom
my xperia s does't work
it give a black lighted screen
when I press power button with volume up it close then open again giving purple notification for a second followed by blue one for a second , sony logo and return to the same black screen !!
and it doesn't power off at all , only restart in that pattern !
help please !
and when i try sony ericsson xperia flasher -- fast boot via ADB , it tell me ( error - this action needs a connected device in ADB mode )
me too D;
mine stuck in twrp menu cant restore too.
Have you got the possibility to connect your mobile phone to a Linux computer? Maybe work with Linux. Can be helpful
Blackjackxx said:
hello everybody
I have xperia s with unlocked boatloader
I was downgrading from paranoid android 4.6 to HUSIXPERIA V3
I followed the instructions pretty well
after i finish installing the rom and i was rebooting to start the new rom
my xperia s does't work
it give a black lighted screen
when I press power button with volume up it close then open again giving purple notification for a second followed by blue one for a second , sony logo and return to the same black screen !!
and it doesn't power off at all , only restart in that pattern !
help please !
Click to expand...
Click to collapse
That happens to me too. Try waiting for it first for several minutes. And if takes too long, maybe more than 5 mins, try pressing power+volUP until it vibrates three times. Then power it on again. And also this happens too while my phone is charging.
ronin1728 said:
That happens to me too. Try waiting for it first for several minutes. And if takes too long, maybe more than 5 mins, try pressing power+volUP until it vibrates three times. Then power it on again. And also this happens too while my phone is charging.
Click to expand...
Click to collapse
guys, you could have written this in my project, I would have helped you immediately!! Just install a stock based kernel again or the stock kernel. Stock kernel: http://d-h.st/o0M
Hello,
I have left my Sm-p605 power off for a while so when i tried to power it on nothing happened (flat battery I assume)
So I plugged it on the charger and this is what happen now:
- When plugged on the charger after few seconds I can see the battery sign (with the flash in the middle) then after few seconds I get the screen :
Samsung Galaxy note 1 2014 edition for about ten seconds then black screen and after a short while Samsung ...... screen.
- This scenario is obtained without any pres on any key ! looks like it start booting by it self.
- During the boot loop if I press Vol + the next boot will be in recovery but again boot loop
- During the boot loop if I press Vol - I get to the download screen and there no boot loop ! I have to do a long press on the power button to exit !
- If tablet not plugged on the charger: dead !
I thought that the battery was dead so I replaced it : same with the new battery !
As I can access download mode I was thinking to flash the ROM but there is no way as the USB port is busy with the charger and if I disconnect the charger the scren goes black.
I have tried a lot of tips found on the net but so fa no success !
What looks strange to me is the fact that the tablet seems to start by it self without the need of pressing the power switch !
But this switch looks OK as it works to exit the download mode !
Anybody has an idea of what could be done to get out of this situation ? Any idea will be welcome.
Thanks in advance !
Hello,
I have exactly the same problems with this model (SM-P605). I've tried several ROMS via different versions of ODIN and also with PIT-file, repartion etc. My tablet stucks always in the boot loop and I cannot enter the recovery menu. Also I soldered wires and power the tablet from an external power supply but still no luck.
Few people have managed to fix the problem but I think they had a WIFI model and not the LTE version like mine.
Is there anybody out there who could solve this problem with the SM-P605?
Kind regards
Franz
francesco34 said:
... I've tried several ROMS via different versions of ODIN and also with PIT-file, repartion etc. My tablet stucks always in the boot loop and I cannot enter the recovery menu.....
Click to expand...
Click to collapse
Just saw this.
As you can flash I'd try flahing latest multiple part stock and if that works I'd start from scratch.
Didn't say if you tried that.