Has anyone had any success with after market rapid charging solutions? I see the OEM model number of the charger that came with the phone is ETA0U61JBEGSTA.
Has anyone found a generic equivalent for this charger? The last 2 amazon ones I bought were really slow charging & took over 4hrs to fully charge.
I use the monoprice 2.1 amp charger it works great. It may damage your battery but to me it doesn't matter I'll buy a new battery in a year for $15 if I have too.
http://www.monoprice.com/mobile/Pro...Id=108&categoryId=10851&subCategoryId=1085102
It has 4 ports 2 of them are 2.1amp and the others are 500mah I believe so I can plug in my ipod as well
Also bought their 2.1 amp car charger
http://www.amazon.com/gp/aw/ol/B00822J004?c=n&qid=1365830047&sr=8-2
Got it for $6.50 from Planet Mobile and fulfilled by Amazon. Looks and works perfectly.
Razorblood said:
http://www.amazon.com/gp/aw/ol/B00822J004?c=n&qid=1365830047&sr=8-2
Got it for $6.50 from Planet Mobile and fulfilled by Amazon. Looks and works perfectly.
Click to expand...
Click to collapse
6.50? very cheap
After seeing this article http://www.androidcentral.com/acces...mium-charger-rapid-charges-android-phones-too last year, I picked up a couple for $10ea. from an online source that was going out of business. They are available for ~$15 today. This is the only thing BB offers that rocks.
For an inexpensive but quality solution, try Monoprice.
Edit: If I forget to plug in at night, in the time it takes me to get ready to leave for work, I am at 90% or better.
Just FYI, for those commenting about using chargers higher than 1A (1000 mAh), the stock kernel will only allow 1A of current to reach the battery regardless if the charger is of a higher capacity. However there are custom kernels (such as Perseus) that allow this value to be overridden, so that the battery can be charged with more than 1000 mAh of current. It is recommended to not charge the battery with a value higher than 0.7 of the battery's total capacity. For the stock 2100 mAh battery, you will want to set the charging value to 1470 mAh or less.
n023b said:
I use the monoprice 2.1 amp charger it works great. It may damage your battery but to me it doesn't matter I'll buy a new battery in a year for $15 if I have too.
http://www.monoprice.com/mobile/Pro...Id=108&categoryId=10851&subCategoryId=1085102
It has 4 ports 2 of them are 2.1amp and the others are 500mah I believe so I can plug in my ipod as well
Also bought their 2.1 amp car charger
Click to expand...
Click to collapse
It wont damage your device. If you havent altered stock parameters than it wont draw more power than 1 amp
Sent from my GT-I9300 using xda premium
I seem to remember seeing there was a cable mod to make the S3 charge faster? actually pull in more juice quicker? As I recall you had to modify the USB cable with a resistor in the right place?
I have plugged my S3 in a 2.1amp charger and I don't see it charging any faster than the 1.0amp charger. My wife's iPhone 4S however charges MUCH faster on the 2.1amp charger vs the 1.0amp charger
I'd like to figure out a way to make the S3 charger more quickly using a 2.1amp (or 1.0amp) charger if that's possible.... but I didn't book mark the thread when I saw it and can't find it again
Related
I had a question about a charger - I'm interested in getting a second charger for the Vibrant. I see that the charger that comes with the Vibrant says it has an output of 5.0V and 0.7A.
If I have an old LG charger that has an output of 5.1V and 0.7A, would that work. Could it damage the battery in my Vibrant, in anyway.
Thanks.
Not sure about your old charger, but it should work. Try it out at your own risk though.
I did want to comment on the chargers for the Vibrant. The phone seems to want a lot of current to charge properly. I was using an older 5V 500mA charger that served me well with my G1 and older BB Pearl. I had the Vibrant on it and it wouldn't charge fully. I also noticed the same thing when I would hook-up the vibrant to my notebook (typically 500mA max per port).
The good news is that there are a lot of cheap 5V 1A chargers on eBay. Just make sure to check a charger's spec before buying one.
$1.75 wall charger - http://cgi.ebay.com/US-AC-Power-USB...er_MP3_Player_Accessories&hash=item4aa03f4b9a
I also bought 5V 1A car chargers and mini USB to micro USB adapters so that I can use my old USB to mini USB cables when I am on the go.
$2.40 car charger - http://cgi.ebay.com/1000mA-1A-USB-C...er_MP3_Player_Accessories&hash=item4399e189d1
Charge only $1 - http://shop.ebay.com/i.html?LH_BIN=...r&_dmpt=PDA_Accessories&_trksid=p3286.c0.m301
Charge + Data $2 - http://shop.ebay.com/i.html?_nkw=mi...adapter&_osacat=0&_trksid=p3286.c0.m270.l1313
I have used my iphone charger a couple times. Very small letters on the back but I think it says it is 1.0A. Worked fine bit I went back to my vibrant charger. I also found a car charger at a circle K for $9.99. Probably could of got one a little cheaper on ebay but it was there and i needed a charge...lol
Sent from my Samsung Vibrant using XDA App
Vegastouch said:
I have used my iphone charger a couple times. Very small letters on the back but I think it says it is 1.0A. Worked fine bit I went back to my vibrant charger. I also found a car charger at a circle K for $9.99. Probably could of got one a little cheaper on ebay but it was there and i needed a charge...lol
Sent from my Samsung Vibrant using XDA App
Click to expand...
Click to collapse
Tried my old charger .. it works but is really slow compared to the one that came with the Vibrant. Probably going to end up purchasing an extra one for when I travel.
Personally I don't mind something charging slower when I travel as long as I'm getting more power to the phone than I'm using of course.
Monoprice has 1000mA
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
The extra 300mA will not damage the phone. Most smart phones require 700mA-1A to charge properly. But be careful, cheapo charger has potential to fry your phone. Anytime I buy a charger from ebay or cheap vendor, I plug it in to my old MP3 player for a week before I use it with my newer devices.
I have the same one that you see on monoprice. I've been using it for almost 2 years with no problem at all, YMMV tho.
I'd recommend this one. Looks identical to the charger that comes with my 3GS. Works well, I use it every day at work for more than 6 months now. Again, YMMV.
http://www.dealextreme.com/details.dx/sku.26446#open full view
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
the max charge rate for a Li-ion battery is 1C. So you could charge at up to 1500mA.
I ordered that exact charger a few days ago.
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
The amperage rating only tells you the *maximum* possible output. The device (your phone) controls the current draw. As long as the voltage matches (5v), you can use a charger with any amperage rating which is 700mA (0.7A) or higher.
(Note that this only applies to chargers that your phone plugs into. You have to be more careful with the self-contained spare-battery chargers (where you remove the battery from the phone and put it into the charger). But those are normally battery-specific anyway.)
Also, you *might* risk damaging the battery through long-term usage of a charger that can't supply at least the minimum amperage (such as the sfsilicon's 500mA transformer). The end of a charge cycle draws the most power which is probably why sfsilicon couldn't fully charge his battery.
MV10 said:
.......
. The end of a charge cycle draws the most power which is probably why sfsilicon couldn't fully charge his battery.
Click to expand...
Click to collapse
that might explain why my laptop wouldn't always charge to 100% - first few times it did, and i'd find the notification msg when i'd close the laptop, but last few times it didn't
learn something every day
as i use the vibrant tethered every nite while browsing (which is when it was charging), any problem with finishing the charge with the samsung wall charger? ie interrupting the charge when i take it off the laptop?
In the meantime I got inspired by some threads in which people claimed that 2A (amp) charger will make it faster to charge up my note then original 1A charger. I bought original Samsung 2A charger for Samsung galaxy tab and tried that out and I must say that during the first week or two the charging time decreased from around 2.5 - 3 hours into something around 1h 40-50 min.
Later on everything returned to standard 3 hours though, charging with 2A charger is almost identical to 1A charger so from my experience there is no added value with this approach (unless ICS will make a change, or some custom rom).
For anyone interested I enclosed picture where in the top row you may see charging with 1A charger after 1h50min, 2h40min (both just random pics), then when this app (https://market.android.com/details?id=net.whph.android.battery) said it is 100% and the last picture is when galaxy note (Android) system said it is 100% (green battery icon). In the bottom row there is the same scenario with 2A charger. I am on the stock rom 2.6.35.7-N7000XXKKA.
Im not sure but I think you need a kernel that allows more than 1A charging for the 2A charger to work.
EarlZ said:
Im not sure but I think you need a kernel that allows more than 1A charging for the 2A charger to work.
Click to expand...
Click to collapse
I guess so, what makes me slightly uncertain is that initially, charging time was around 2 hours ...
This is an interesting thread. I'd like to get more information about 2A chargers and whether they really make a difference.
Also I heard that when plugged to a TV (using the MHL cable) the phone may actually consume the battery more, even when plugged to the charger simultaneously. therefore if 2A chargers charge faster, it may also solve this problem.
Qvp said:
This is an interesting thread. I'd like to get more information about 2A chargers and whether they really make a difference.
Also I heard that when plugged to a TV (using the MHL cable) the phone may actually consume the battery more, even when plugged to the charger simultaneously. therefore if 2A chargers charge faster, it may also solve this problem.
Click to expand...
Click to collapse
I actually have both, micro USB to USB and micro USB to MHL cables. Wasn't able to test them for a longer time as they sometimes work and sometimes don't, especially mhl cable shows videos for like 30 seconds and then there is a lost signal message on my TV, then it wakes up, then it is gone again ... I could fiddle wit it, but will rather wait for ICS upgrade and then will return to it again.
Sent from my SGN
Iphone charger
I am using the iPhone charger. It is a 2A and so far I see an improvement in the battery life. With the original charger (and BB one) the battery reading was 2100mAh . Now is 2600mAh. I don't know why or how.
Also I see a sightly improvement in how the battery lasts for normal use. I get around 18hours
antonioeram said:
I am using the iPhone charger. It is a 2A and so far I see an improvement in the battery life. With the original charger (and BB one) the battery reading was 2100mAh . Now is 2600mAh. I don't know why or how.
Also I see a sightly improvement in how the battery lasts for normal use. I get around 18hours
Click to expand...
Click to collapse
the iPhone charger is 1a... Only the ipad charger is 2a
Sent from my Galaxy Nexus
What we need is someone with 2 notes with dead batteries and plug the original charger 1a on one and a 2a charger on the other and see which one gets fully charged first! Maybe its me but I can definitely see a difference between the original and the one I'm using (playbook charger 1.8a)
Sent from my Galaxy Nexus
big samm said:
What we need is someone with 2 notes with dead batteries and plug the original charger 1a on one and a 2a charger on the other and see which one gets fully charged first! Maybe its me but I can definitely see a difference between the original and the one I'm using (playbook charger 1.8a)
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I did it, and while not with 2 notes side by side, you can have a look at the pictures at the 1st post, the time and charging rate shows its pretty same on the stock rom whether you use 1A or 2A charger. (Although it was very different first one or two weeks, after that battery get used to 2A charger and charging is as slow as with 1A ...)
antonioeram said:
I am using the iPhone charger. It is a 2A and so far I see an improvement in the battery life. With the original charger (and BB one) the battery reading was 2100mAh . Now is 2600mAh. I don't know why or how.
Also I see a sightly improvement in how the battery lasts for normal use. I get around 18hours
Click to expand...
Click to collapse
How did you measure the current in mAh or what app did you use? Thanks.
My bad. I am using the iPad chargers. not iPhone . Those are 2A. To verify I am using battery pro monitor.
Here is a screenshot.
Sent from my GT-N7000 using XDA
SGN stock batt with ipad charger?
Hi, I see some of you are using 2A/ipad charger to charge you SGN. My question is, will there be any side effects on that could harm the stock batt in short or long run?
FYI, atm, I have an ipad charger for home and car and i intend to just use the same charger to charge all devices including my SGN. Im not looking for a fast charging option, but just a hassle free and conveniences.
I appreciate if you could give suggestion on a dual port charger (for home and car) where I can charge my devices simultaneously at one time.
No harm as long as the volatage output from your charger is 5v. This is what pushes the current to ur device. Higher it goes more it pushes.
However the current that the charger provides decides how fast it can charge. This will also depend on the device. If the device is manufactured to charge at 1 amp and u use a 2 amp charger then it will only use 1amp. If however u use a 750mah charger it can only use 750mah and charge slowly.
@Taptalk-GalaxyNote
Hi,
Initially i was thinking about getting a bigger 3000+mah battery or something but i've realized that i like the form factory of the GNex so i won't go for it.
Now i have 2 batteries the 2100mah and the original one that came with Verizon GNex.
I have looking for a external battery charger and found this
Has anyone here tried these, they seem to be the cheapest way to make use of both batteries.
Also the current wall charger i have reads the following:
input: 0.4A
Output: 5.3V=2.0A
Is the ebay charger in the above link close to the above specs as i don't know what they actually mean
Thanks in advance
I can't answer your first question but I can answer your second one.
Basically, your current charger is capable of charging the spare battery at a faster rate than the eBay charger.
The "charging rate" of 2.0A/2000mA versus the eBay charger's 0.8A/800mA.
When I'm looking for chargers, I prefer chargers that have an output of 1.0A/1000mA or greater so that my battery or phone is charged faster.
800mA is better than average. I'd find that acceptable.
I find most chargers have an output of 500mA. As a comparison, the OEM Samsung USB wall charger has an output of 1.0A/1000mA.
EDIT: In case anyone's worried about blowing up their battery using a charger with a higher amperage output then OEM, here's some reading material... bit.ly/xl2NPI
The only downside to using anything over 1.0A is that it may shorten the lifespan of your battery (the higher the amperage, the faster the charge, but it also comes with more heat, and more heat is bad for your battery).
What kind of wall charger are you using?
I bought a Cellet dock/charger. It can charge the phone and an extra battery at the same time. I mostly use it to only charge an extra battery. Sometimes it takes 4+ hours to charge a battery that is connected in the extra battery slot. WTF??? 4+ Hours?
ChappellHeel said:
What kind of wall charger are you using?
I bought a Cellet dock/charger. It can charge the phone and an extra battery at the same time. I mostly use it to only charge an extra battery. Sometimes it takes 4+ hours to charge a battery that is connected in the extra battery slot. WTF??? 4+ Hours?
Click to expand...
Click to collapse
I'm just using the OEM Samsung USB wall charger that came with my phone. It's sometimes listed as a "travel" wall charger. It has an output of 1.0A.
What's the output of your Cellet adapter (i.e. what you plug into the wall)? I'm pretty sure it has an output of 1.0A from what I've read.
Have you tried one of these?....IMO its better than carrying a couple of batteries around.
http://www.amazon.com/PowerGen-Exte...d=1348865471&sr=1-1&keywords=portable+charger
Sent from my Galaxy Nexus using xda premium
707BeastMode707 said:
Have you tried one of these?....IMO its better than carrying a couple of batteries around.
http://www.amazon.com/PowerGen-Exte...d=1348865471&sr=1-1&keywords=portable+charger
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Good for traveling, but not good for when you're on the go.
Sent from my Galaxy Nexus using Tapatalk 2
ChappellHeel said:
What kind of wall charger are you using?
I bought a Cellet dock/charger. It can charge the phone and an extra battery at the same time. I mostly use it to only charge an extra battery. Sometimes it takes 4+ hours to charge a battery that is connected in the extra battery slot. WTF??? 4+ Hours?
Click to expand...
Click to collapse
I am using the official HP touchpad charger, they are monstrous.
It charges the 2100mah battery from being dead to 100% with sync on in 1.5 hrs.
4+ hrs. is too long.
You can get on wallmart here or on ebay.
I haven't been this lucky with other chargers i've bought on ebay.
707BeastMode707 said:
Have you tried one of these?....IMO its better than carrying a couple of batteries around.
http://www.amazon.com/PowerGen-Exte...d=1348865471&sr=1-1&keywords=portable+charger
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Ya i like these, but i would have to carry a cable and a battery at the same time, plus i don't have a tablet or any other gadget that uses microUSB charging.
On another note do these come with 2A charging instead of 1A??
if yes than i might just pick one up.
Alternative?
I've recently purchased this official charger. Does the job perfectly fine and is very small and sleek
http://www.google.co.uk/search?q=Samsung+Battery+Charger+Stand+without+Battery+for+Galaxy+Nexus&oq=Samsung+Battery+Charger+Stand+without+Battery+for+Galaxy+Nexus&sugexp=chrome,mod=10&sourceid=chrome&ie=UTF-8#q=Samsung+Battery+Charger+Stand+without+Battery+for+Galaxy+Nexus&hl=en&prmd=imvns&source=univ&tbm=shop&tbo=u&sa=X&ei=Q3VnUJWgH4WyhAeEhIHwAg&ved=0CDoQrQQ&bav=on.2,or.r_gc.r_pw.r_qf.&fp=5842132675ef9dd1&biw=1366&bih=653
Pretty sure you'll be able to get that in the states. Found it on Amazon UK here
I just lost my USB wall charger and realized my spares don't charge as fast as my previous one...
My previous charger had my phone at +700ma while in sleep, two of my spares can do 400 and one can only do 200!
One time I used a car charger that had me at +900ma in sleep so I would like to try and find a new wall charger that can get me +900.
BTW all the chargers I have used have said they are 5v 1000ma, so clearly I can't just go by the specs they list- I need a first hand experience of a quality charger.
So I open it to the forums. Anyone here have experience of a particularly strong USB wall charger?
I got a good Motorola one on Amazon for pretty cheap and it's been going strong for a while.
Sent from my GT-N7100 using xda app-developers app
Well, you do need one that's 1000mAh.
You just need one from a reliable manufacturer that's not mis-labelled crap.
I'd just look for a quality brand. I got lucky with one for $1.50 on eBay but the seller isn't selling them any more.
Hm so I guess OEM or genuine name brands should reliably be up to their specs, then? Well, I guess I'm going to shop around for one that maybe says 1500ma or more because I believe my phone can take more than a 1A charger can give it, and it probably won't disappoint
Samsung note II have a battery of 3,100mAh, the charger is 2000mA(2A). but my i can use the same charger for my S2. so i guess that the amphere doesn't really matter. just that the higher the amphere of the charger, the faster it charge. But you sure need a higher amphere charger for bigger battery. Hope this help.
seacreature said:
Samsung note II have a battery of 3,100mAh, the charger is 2000mA(2A). but my i can use the same charger for my S2. so i guess that the amphere doesn't really matter. just that the higher the amphere of the charger, the faster it charge. But you sure need a higher amphere charger for bigger battery. Hope this help.
Click to expand...
Click to collapse
I've read that smartphones (at least android phones) have controlled charging circuits that will only allow for as much amperage as they are set to allow. So if you connect a 2000mA charger to the phone but it's limited to 1000mA then it will only draw 1000mA. However as I have noticed just because a charger says it can output 1000mA doesn't mean that it can. I have tried 4 different 1000mA chargers each with pretty different outputs- and if they don't output as much as your phone will take it WILL charge slower. The point of this thread was to gather information on which chargers are reliably fast and ideally economical ones (there's enough OEM chargers I can find for 10x the price of off-brand ones that would hopefully do the job right).
My car charger broke, so I'm in the market for a new one.
I know 2.1 amps should be pretty safe, but I also see some with 3 amps. Is that still safe?
What do you guys use?
Pretty sure the S3 limits the amperage coming in so anything 1 amp and above should work fine in a car.
Best Buy sells one by Rocketfish that's micro USB and it also has a USB outlet on the plug itself and it's not bulky at all.
I generally shy away from car chargers completely but that charger won me over with it's build quality and specs.
Sent from my HTC6435LVW using Tapatalk 2
pappcam said:
Pretty sure the S3 limits the amperage coming in so anything 1 amp and above should work fine in a car.
Click to expand...
Click to collapse
Is that to say that anything over 1 amp is "throttled" to 1 amp so I shouldn't bother getting a 2amp?
re: rocketfish.
I see a bunch on there around the $20 mark. Looks overpriced, just like everything else I've ever seen by rocketfish.
1000 amps would be safe. As long as the voltage is 5v your good. The device will only take a certain amount of amperage, and the output device will only supply what the device needs. Voltage is different, too much of it can damage circuitry.
Sent from my SPH-L710 using xda premium
Okay, so how much can the phone effectively use? Surely 1amp is better than 1/2 for charge speed, but does 2 give you fatter charging than 1,or no?
According to BMW Pro my phone will charge at up to 1200ma on the stock battery and 2000ma when using my Anker 4400mah battery when plugged into a 2.1amp charger. I can confirm that the charging time for the extended battery is only slightly longer than the standard battery but still lasts twice as long in use. So I do believe the phone is capable off making use of a 2.1amp charger it just limits the charge rate to around .5C to protect the battery.
Sent from my cm_tenderloin using xda app-developers app
I use a new Trent 2 amp charger and it works fine. I used to use a 1 amp Motorola charger and it barely charged couple of percent when I had bluetooth, music, waze, gps, and screen on during a 20 minute ride. With the 2 amp charger, I easily get an extra 7% or so after a 20 minute ride.