I had a question about a charger - I'm interested in getting a second charger for the Vibrant. I see that the charger that comes with the Vibrant says it has an output of 5.0V and 0.7A.
If I have an old LG charger that has an output of 5.1V and 0.7A, would that work. Could it damage the battery in my Vibrant, in anyway.
Thanks.
Not sure about your old charger, but it should work. Try it out at your own risk though.
I did want to comment on the chargers for the Vibrant. The phone seems to want a lot of current to charge properly. I was using an older 5V 500mA charger that served me well with my G1 and older BB Pearl. I had the Vibrant on it and it wouldn't charge fully. I also noticed the same thing when I would hook-up the vibrant to my notebook (typically 500mA max per port).
The good news is that there are a lot of cheap 5V 1A chargers on eBay. Just make sure to check a charger's spec before buying one.
$1.75 wall charger - http://cgi.ebay.com/US-AC-Power-USB...er_MP3_Player_Accessories&hash=item4aa03f4b9a
I also bought 5V 1A car chargers and mini USB to micro USB adapters so that I can use my old USB to mini USB cables when I am on the go.
$2.40 car charger - http://cgi.ebay.com/1000mA-1A-USB-C...er_MP3_Player_Accessories&hash=item4399e189d1
Charge only $1 - http://shop.ebay.com/i.html?LH_BIN=...r&_dmpt=PDA_Accessories&_trksid=p3286.c0.m301
Charge + Data $2 - http://shop.ebay.com/i.html?_nkw=mi...adapter&_osacat=0&_trksid=p3286.c0.m270.l1313
I have used my iphone charger a couple times. Very small letters on the back but I think it says it is 1.0A. Worked fine bit I went back to my vibrant charger. I also found a car charger at a circle K for $9.99. Probably could of got one a little cheaper on ebay but it was there and i needed a charge...lol
Sent from my Samsung Vibrant using XDA App
Vegastouch said:
I have used my iphone charger a couple times. Very small letters on the back but I think it says it is 1.0A. Worked fine bit I went back to my vibrant charger. I also found a car charger at a circle K for $9.99. Probably could of got one a little cheaper on ebay but it was there and i needed a charge...lol
Sent from my Samsung Vibrant using XDA App
Click to expand...
Click to collapse
Tried my old charger .. it works but is really slow compared to the one that came with the Vibrant. Probably going to end up purchasing an extra one for when I travel.
Personally I don't mind something charging slower when I travel as long as I'm getting more power to the phone than I'm using of course.
Monoprice has 1000mA
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
The extra 300mA will not damage the phone. Most smart phones require 700mA-1A to charge properly. But be careful, cheapo charger has potential to fry your phone. Anytime I buy a charger from ebay or cheap vendor, I plug it in to my old MP3 player for a week before I use it with my newer devices.
I have the same one that you see on monoprice. I've been using it for almost 2 years with no problem at all, YMMV tho.
I'd recommend this one. Looks identical to the charger that comes with my 3GS. Works well, I use it every day at work for more than 6 months now. Again, YMMV.
http://www.dealextreme.com/details.dx/sku.26446#open full view
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
the max charge rate for a Li-ion battery is 1C. So you could charge at up to 1500mA.
I ordered that exact charger a few days ago.
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
The amperage rating only tells you the *maximum* possible output. The device (your phone) controls the current draw. As long as the voltage matches (5v), you can use a charger with any amperage rating which is 700mA (0.7A) or higher.
(Note that this only applies to chargers that your phone plugs into. You have to be more careful with the self-contained spare-battery chargers (where you remove the battery from the phone and put it into the charger). But those are normally battery-specific anyway.)
Also, you *might* risk damaging the battery through long-term usage of a charger that can't supply at least the minimum amperage (such as the sfsilicon's 500mA transformer). The end of a charge cycle draws the most power which is probably why sfsilicon couldn't fully charge his battery.
MV10 said:
.......
. The end of a charge cycle draws the most power which is probably why sfsilicon couldn't fully charge his battery.
Click to expand...
Click to collapse
that might explain why my laptop wouldn't always charge to 100% - first few times it did, and i'd find the notification msg when i'd close the laptop, but last few times it didn't
learn something every day
as i use the vibrant tethered every nite while browsing (which is when it was charging), any problem with finishing the charge with the samsung wall charger? ie interrupting the charge when i take it off the laptop?
Related
I want to get a few extra USB's and an extra chargers... Can someone link me to something that wont mess up my phone/has the right output?
The K-Zoo Kid said:
I want to get a few extra USB's and an extra chargers... Can someone link me to something that wont mess up my phone/has the right output?
Click to expand...
Click to collapse
I bought two of these to use with my existing usb cables and wall chargers. It works great for both charging and file transfering.
http://www.amazon.com/Motorola-RAZR2-Original-Micro-Adapter/dp/B001E5FN20/ref=pd_cp_cps_2
The K-Zoo Kid said:
I want to get a few extra USB's and an extra chargers... Can someone link me to something that wont mess up my phone/has the right output?
Click to expand...
Click to collapse
there is no "right" output
most usb ports will charge up to 500mA
the stock usb wall charger is, i think 750mA, i havent looked at it in awhile since its behind my desk, but i know its not 1A
the oem nexus one wall charger (non usb) will charge up to 1A
I would only recommend a 1A charger because there's no point to use a lower amperage, it just takes that much longer to charge your phone.
Couple of good threads on this topic, both on the vibrant and the i9000 acessories thread. Lots of good info. The deal extreme chargers look promising. Waiting to hear from a person who bought a 2amp charger if the extra 1a is used by the phone especially when using gps.
Sent from my SGH-T959 using XDA App
sfsilicon said:
Couple of good threads on this topic, both on the vibrant and the i9000 acessories thread. Lots of good info. The deal extreme chargers look promising. Waiting to hear from a person who bought a 2amp charger if the extra 1a is used by the phone especially when using gps.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
well, my phone will still charge (slowly) while watching avatar, which i would assume is a pretty high load on the cpu, using the 1amp charger i got from dealextreme.
fwiw, the one i have is a 1A "HTC" wall charger thats square and lights up HTC when charging, it ****s up my screen sensitivity so i wouldnt recommend it, but it was only like four dollars so i'll live with it.
link:
http://www.dealextreme.com/details.dx/sku.41025
AC charger or car charger?
The charger does not dictate the amount of current given to the phone. The phone will only draw what it wants to. The charger can limit the maximum current but if the phone only asks for 700mA, a 2A charger will only provide the 700mA demanded by the phone.
I don't know what the max current our phones will use but having a larger charger will only help if the phone requests the larger current.
Typos and other gibberish courtesy of Swype
ive been using these:
http://www.monoprice.com/products/p...=10311&cs_id=1031106&p_id=6767&seq=1&format=2
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10303#1030307
This is a pointless post and you know it...
Sent from my SGH-T959 using XDA App
turbosix said:
well, my phone will still charge (slowly) while watching avatar, which i would assume is a pretty high load on the cpu, using the 1amp charger i got from dealextreme.
fwiw, the one i have is a 1A "HTC" wall charger thats square and lights up HTC when charging, it ****s up my screen sensitivity so i wouldnt recommend it, but it was only like four dollars so i'll live with it.
link:
http://www.dealextreme.com/details.dx/sku.41025
Click to expand...
Click to collapse
I'm not sure how stressful watching Avatar is from a current draw perspective. The torture test is to turn on 3G, Bluetooth, synch, GPS and run the Navigation app while driving. Some post indicate that only a true 2A charger will be able to do this w/o discharging the battery. 1A ones can only limit the discharge. Cheap ones empty quickly.
Could you check what your charge current file value is for your 1A DE charger? Make sure to use the original Samsung cable and cross check with the original Samsung charger and a USB port.
1) Use an application like ES File Manager or Astro Filemanager
2) /sys/class/power_supply/battery/batt_chg_current
Here are the 2 threads that I've found have a lot of charger info.
Vibrant: http://forum.xda-developers.com/showthread.php?t=749746
Galaxy S: http://forum.xda-developers.com/showthread.php?p=7933978
well, i'll come back and update with samsung usb numbers as i wont have access to it for awhile.
i checked the file when using the HTC cable plugged into my work dell and it said 850-860 after checking a a dozen times
plugged into the wall charger now and its around 700-750
is that supposed to be reporting in mA?
turbosix said:
well, i'll come back and update with samsung usb numbers as i wont have access to it for awhile.
i checked the file when using the HTC cable plugged into my work dell and it said 850-860 after checking a a dozen times
plugged into the wall charger now and its around 700-750
is that supposed to be reporting in mA?
Click to expand...
Click to collapse
Yes, but I haven't heard that anyone has measured it. The numbers you are getting are consistent with what others have see. 800-900 for USB. The original Samsung 700mA charger is getting 900-1100.
If you have another Android phone try that one as well to see the differences (e.g. G1 ~300-400).
sfsilicon said:
Yes, but I haven't heard that anyone has measured it. The numbers you are getting are consistent with what others have see. 800-900 for USB. The original Samsung 700mA charger is getting 900-1100.
If you have another Android phone try that one as well to see the differences (e.g. G1 ~300-400).
Click to expand...
Click to collapse
fwiw, gf's oem nexus one wall charger (non usb)
1100-1200mA
I just bought this dual usb charger so I could charge my Vibrant and my wifes blackberry. It's 2Amp (1A per port) and works great, if a little pricey, but worth it imo. I shouldn't need to buy another charger for a long time.
Griffin PowerBlock Dual Universal Charger for MP3 Players and USB Devices
(can't post links yet, google it)
Sent from the future on my Samsung Vibrant
Anybody come across a car charger that is high current like the HTC wall charger?
Most car chargers are classified as "rapid".
Anything designed to charge an iPad (2.1A versus the typical 1A) will give you plenty of juice. I use the Scosche reVIVE II with Pandora, Bluetooth, and GPS Navigation all on and still have enough power to positively charge my battery.
Fair warning, though, this will cause the phone to get real hot (I've had the overheating warning lights flash twice so far), so make sure you have plenty of ventilation around the phone, keep it out of the sun, etc etc.
Any charger that is at least 1 amp. will do. The phone 'pulls' a max of around 0.85 amps. No need for more then 1 amp.
If it has a replaceable cable, it must be the heaviest gauge, shortest cable, that you can use. I have seen long cheap thin cables that drop over a volt, and the Thunderbolt charges really slowly.
The charger or cable have to state that they for rapid charging. To rapid charge, you need to have the USB D- and D+ lines shorted. If that are not shorted, the Thunderbolt limits the charge current to around 0.35 amps. thinking it is connected to a PC. If they are shorted, letting the Thunderbolt know it can be rapid charged, you get up there around 0.85. You can easily modify the charger for high rate if it is good for at least an amp.
And in the end is heat. Heat and lots of it. It will damage the battery. So put it out of the sun and in cool air like near a vent.
Motorola Rapid Charger on Amazon is the best. I bought two.
http://www.amazon.com/Motorola-Vehi...Q9CA/ref=sr_1_1?ie=UTF8&qid=1309959388&sr=8-1
Review off Amazon
Genuine Motorola charger in retail packaging. 4.75-5.25V 950mA output, works w/ most micro-USB phones like Incredible, etc., June 11, 2010
By
David Pearlman "sound fanatic" (Arlington, MA) - See all my reviews
(TOP 500 REVIEWER) (VINE VOICE) (REAL NAME)
Amazon Verified Purchase(What's this?)
There are so many sketchy sellers selling phone chargers out there, that it can be a bit scary. The problem is that if the charger is poorly made, the output of the charger can be out of spec and can, in some cases, fry the phone you connect to it.
For that reason, when it comes to phone chargers, you should stick to name brands. (They are all made in China, but the name brand ones are usually subject to stricter QA).
When I found this charger on Amazon, SOLD BY AMAZON, I jumped on it. It's a MICRO USB car charger, made for Motorola and sold under the Motorola name, in retail packaging. The rated output is 4.75-5.25V and 950mA.
This charger should work fine with most any phone that uses the MICRO USB connector. The key number to pay attention to is the second one, the rated amperage. This is the MAXIMUM amount of current that the phone can request from the charger. A typical USB port on a PC provides as little as 100mA, and few provide more than 500mA. So this charger should charge your phone faster than when it's connected to a PC. A few phones out now can use up to 1000mA. But that just means they CAN use that amount. If 950mA is provided, they'll still charge, just a bit more slowly.
Note that the amperage (second number) merely tells you how much the charger CAN supply, if requested. The phone itself is responsible for asking for the current. That is to say, if this charger can provide 950mA, but your phone can only use 300mA--no problem. Your phone asks for 300mA and the charger provides all of what is requested. If, on the other hand, your phone can use 1000mA, this charger will provide all it can, which is 950mA--a wee bit less than the max asked for. That's also not a problem; it just means your phone will charge a little bit (not much in this case) more slowly. The rated voltage for this charger is presented in a range of 4.75-5.25V. The "ideal" voltage for a USB charger of any type if 5V. And most chargers for home use are rated right at 5V. But car chargers work in a noisier environment and thus you have the range. This is where a cheapo charger can really do damage, as some of them are poorly regulated and can provide voltages that are WAY out of spec. Again, when you can get a name brand charger from a seller you can trust (Amazon) for such a reasonable price, it's very foolish to consider the cheapo no-names.
This is an excellent quality name brand travel micro USB charger at a price that beats the no-name junk from third party sellers. What's not to like?
BE SURE TO ORDER IT FROM AMAZON AND NOT ONE OF THE THIRD PARTY SELLERS, as some of those have been known to make mistakes with respect to what they ship relative to the listing. I can confirm that Amazon is shipping the P513 /89143N charger, as pictured.
Click to expand...
Click to collapse
ddgarcia05 said:
Motorola Rapid Charger on Amazon is the best. I bought two.
http://www.amazon.com/Motorola-Vehi...Q9CA/ref=sr_1_1?ie=UTF8&qid=1309959388&sr=8-1
Review off Amazon
Click to expand...
Click to collapse
I've been contemplating buying this one, but I'd like to ask you if it charges your battery with navigation+music going? I have a usb charger in my truck, and with both of those going it just manages to keep my battery level where its at, sometimes losing a % or two.
kr0n1c said:
I've been contemplating buying this one, but I'd like to ask you if it charges your battery with navigation+music going? I have a usb charger in my truck, and with both of those going it just manages to keep my battery level where its at, sometimes losing a % or two.
Click to expand...
Click to collapse
From what I've read in the past here on XDA and on the reviews for the charger (on amazon) you shouldn't have a problem. The second review for the charger on amazon states that the reviewer was looking for a charger which actually charged his phone will using GPS and that he found it. It's a very well built charger and cheap. It's made my Motorola and sold by Amazon so buy with confidence.
kr0n1c said:
I've been contemplating buying this one, but I'd like to ask you if it charges your battery with navigation+music going? I have a usb charger in my truck, and with both of those going it just manages to keep my battery level where its at, sometimes losing a % or two.
Click to expand...
Click to collapse
It does indeed charge. I've had it since my original Droid and was concerned when I updated to the TB but it will charge the TB no matter what you're doing (I've had Nav running while on a phone call with BT and searching the internet and it still showed it was charging). Just be prepared for your phone to get HOT!! Great charger.
worwig said:
Any charger that is at least 1 amp. will do. The phone 'pulls' a max of around 0.85 amps. No need for more then 1 amp.
Click to expand...
Click to collapse
Actually, the phone will pull more than 850 mA. You're probably basing that on using a battery monitor, which only shows the flow of current into/out of the battery. I've seen 800 mA into the battery at the same time I have display, GPS and a phone call going, which is definitely more than an additional 50 mA. It wouldn't surprise me if the phone can take advantage of something more than 1A, since I see a battery drain of more than 200 mA with all of that going when not on the charger.
kr0n1c said:
I've been contemplating buying this one, but I'd like to ask you if it charges your battery with navigation+music going? I have a usb charger in my truck, and with both of those going it just manages to keep my battery level where its at, sometimes losing a % or two.
Click to expand...
Click to collapse
I have that Motorola charger and am a heavy GPS user. It charges the battery as if it were plugged into the wall. You'll be very satisfied.
mike.s said:
Actually, the phone will pull more than 850 mA. You're probably basing that on using a battery monitor, which only shows the flow of current into/out of the battery. I've seen 800 mA into the battery at the same time I have display, GPS and a phone call going, which is definitely more than an additional 50 mA. It wouldn't surprise me if the phone can take advantage of something more than 1A, since I see a battery drain of more than 200 mA with all of that going when not on the charger.
Click to expand...
Click to collapse
No, that was measured at the 5 volt power supply, based upon a lab power supply. I did a lot of experimenting when I developed the charger and phone mount for my motorcycle. And to get the 850ma from the power supply, I used a very short, maybe 8 inch, USB cable, and a charge voltage close to 5.3 volts. With 5 volts at the power supply, it would only pull about 650ma from the power supply. That was due to the voltage drop in the USB cable. With the 5.3 volts at the power supply, I was getting close to an actual 5 volts at the Thunderbolt. I never measured the current at the battery, but I could see it being a bit more then the 850ma in, if there were a switch mode supply in there.
Though I like the Battery Monitor widget as a rough guide, I never tested to see if the battery current and the battery monitor are accurate.
Does anyone know if the included HTC ac adapter and cable will charge faster than using your pc with the included USB cable?
happimeal said:
Does anyone know if the included HTC ac adapter and cable will charge faster than using your pc with the included USB cable?
Click to expand...
Click to collapse
Absolutely.
A PC USB port is limited to under 500ma. The Thunderbolt appears to to limit PC USB draw to about 350ma. I haven't measured the actual current in the HTC charger, but it is a high current charger, and charges my Thunderbolt very quickly. Battery Monitor widget shows high battery charge rates. I suspect it is getting near the max rate up near 1 amp.
worwig said:
Absolutely.
A PC USB port is limited to under 500ma. The Thunderbolt appears to to limit PC USB draw to about 350ma. I haven't measured the actual current in the HTC charger, but it is a high current charger, and charges my Thunderbolt very quickly. Battery Monitor widget shows high battery charge rates. I suspect it is getting near the max rate up near 1 amp.
Click to expand...
Click to collapse
HTC charger states 5V/1A on the charger itself.
You can use the Palm car charger for $3.75+tax, free shipping. it is 5V/1A, same rating as the HTC wall charger.
Go here for 25% off
http://www.wireless.att.com/cell-ph...otion/accessories.jsp?source=EC0A0011600jtl10
Add product here, must add to cart to see 25% discount.
http://www.wireless.att.com/cell-ph...027&q_sku=sku4720234&q_manufacturer=&q_model=
Also, if so inclined, you can lop the top off of the charger so that you can use any usb cable (ipod, iphone, anything)
dpham00 said:
HTC charger states 5V/1A on the charger itself.
Click to expand...
Click to collapse
That doesn't mean much. That is the MAX the charger can output. The amount that the Thunderbolt will pull varies. If it thinks it is plugged into a USB, it will be less then 500ma. even if the charger is capable of 10 amps.
worwig said:
That doesn't mean much. That is the MAX the charger can output. The amount that the Thunderbolt will pull varies. If it thinks it is plugged into a USB, it will be less then 500ma. even if the charger is capable of 10 amps.
Click to expand...
Click to collapse
i have used the Palm car charger, checking with bmw, it shows around 850ma, same as on my htc charger.
worwig said:
Any charger that is at least 1 amp. will do. The phone 'pulls' a max of around 0.85 amps. No need for more then 1 amp.
If it has a replaceable cable, it must be the heaviest gauge, shortest cable, that you can use. I have seen long cheap thin cables that drop over a volt, and the Thunderbolt charges really slowly.
The charger or cable have to state that they for rapid charging. To rapid charge, you need to have the USB D- and D+ lines shorted. If that are not shorted, the Thunderbolt limits the charge current to around 0.35 amps. thinking it is connected to a PC. If they are shorted, letting the Thunderbolt know it can be rapid charged, you get up there around 0.85. You can easily modify the charger for high rate if it is good for at least an amp.
And in the end is heat. Heat and lots of it. It will damage the battery. So put it out of the sun and in cool air like near a vent.
Click to expand...
Click to collapse
um, i am aware that any charger that will do 1A will do. that was my question, what car charger will do 1A. Alot of times, they dont have that info listed on pages that are selling them.
and the whole thing about the D- and D+ shorted together, i do not believe. the HTC cable that came with the phone does rapid charging and i use it for data all the time too. if they D- and D+ was shorted, i would not be able to use it for data transfer. not unless the HTC charger shorts them internally inside the charger.
leoingle said:
unless the HTC charger shorts them internally inside the charger.
Click to expand...
Click to collapse
Bingo!!
leoingle said:
um, i am aware that any charger that will do 1A will do. that was my question, what car charger will do 1A. Alot of times, they dont have that info listed on pages that are selling them.
and the whole thing about the D- and D+ shorted together, i do not believe. the HTC cable that came with the phone does rapid charging and i use it for data all the time too. if they D- and D+ was shorted, i would not be able to use it for data transfer. not unless the HTC charger shorts them internally inside the charger.
Click to expand...
Click to collapse
Yes, it is hard to find the current info online or even on the package sometimes.
Yes, it is shorted in the charger. I have seen it done in the cable and the cable can't be used for data of course. Not sure why anyone would do that, but they do.
I see that the wall charger for the Galaxy Nexus outputs 5V and 1A. Unfortunately, none of the extra chargers I'd like to use as additional chargers have this output. Some of them are 5.1V, and some of them all put out under 1A.
From what I understand, using a charger w/ a higher voltage could potentially damage the phone. I know that this unlikely considering it's only an extra .1V in my case, but I don't want to risk it.
As for the amps, I believe that using lower amps isn't dangerous, but may result in charging taking longer than normal.
Are these two assumptions correct? Also, does anyone know of any cheap chargers that put out 5V/1A? If you put in "phone charger" in Amazon, the second hit is a Samsung OEM charger that puts out 5V/0.7A, but I'd rather get one that is going to be an exact match.
700-800mah are fine and acceptable for charging. But if wanting to play games on a charger and still get some kind of charge, go with a 1000 mah charger. 1000 mah charger is also best to use while using mhl so you can hopefully not lose battery charge while streaming video over hdmi.
Sent from my samsung gt i9250 which is in the wrong country.
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
http://www.amazon.com/Samsung-Micro-Travel-Charger-M540/dp/B002HJBM04
http://www.amazon.com/Samsung-Travel-Charger-Adapter-MicroUSB/dp/B0049IE70I
Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33
alee said:
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33
Click to expand...
Click to collapse
it's.. 24 bucks ... for a charger..
lol fml
Dmw017 said:
it's.. 24 bucks ... for a charger..
lol fml
Click to expand...
Click to collapse
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.
alee said:
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.
Click to expand...
Click to collapse
...you say it folds too huh :/ ....
but for that price, i wonder if there are any samsung chargers that are just as good if not better..
that is Apple, after all
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts
I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium
Dmw017 said:
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts
Click to expand...
Click to collapse
Same one.
Good question on whether it's putting out a full 1A. I guess what I do is check the charge times tomorrow with a few different 1A chargers to see if it measures up.
I use this for home:
http://www.amazon.com/Cellet-Charger-Retractable-Cable-myTouch/dp/B004XVM1T0
And this for the car:
http://www.amazon.com/Griffin-Powerjolt-Dual-Universal-Micro/dp/B0042B9U8Q
Both are dual-USB and put out 1amp. Charges my GNEX and iPhone 4 (work) at the same time without issues.
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I've read that the wall charger drops the battery down to 90ish % after it hits 100% and just goes between the two levels until you unplug your charger
While a USB charge is slower and charges your device up to a "fuller" charge
...I may be unfathomably wrong though
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
man that little Apple charger is so damn cute ... lol , ill probably end up buying it once the 1A volt charge is confirmed
edit: just bought it lol, oh well.. it will probably maybe more or less somewhat possibly work like it should at 1A :}
assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I'm not an expert on the subject but I was under the impression that cycles (charge + discharge) were a bigger factor on battery life than something like this. The longer a current is running through the battery (charge or discharge) is detrimental to it's life span.
Leaving a laptop plugged in all the time ruins its battery is my source on this one. I would say it's because it has a constant charge running through the battery.
qreffie said:
I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
That takes a lot longer vs plugging it into the wall
rashad1 said:
That takes a lot longer vs plugging it into the wall
Click to expand...
Click to collapse
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk
[hfm] said:
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
500mA is the max before the PC will disable the port. So your actually get less current.
There are some ports, depending on the motherboard that have a option of outputting more power for charging devices, and also have the port powered when the computer is off. But a normal usb 2.0 port is limited to 500mA max per spec... so a normal usb 2.0 port charging a phone is drawing less then 500mA, or it would get and over current condition and disable the port.
I design electronics and work with USB and batteries often, so let me clear some stuff up in no particular order:
- PC ports are limited to 500mA so will only ever output a max of 500mA
- You can use a wall charger that outputs 1000mA but on most devices the data pins on the micro USB need to be shorted to tell the phone it can try to draw more than 500mA. This is true for HTC devices for example. That means if you get a cheap charger that doesn't short the data pins, when you plug your standard micro-usb cable into it, it will still only charge your phone at 500mA.
- The charging controller is actually in the phone. It decides based on temperature (there's a sensor in the battery), current, voltage across the battery (current charge) and characteristics of the type of battery to figure out how much current to allow into the battery. Although its true that a 500mA charger may have different affects than 1000mA chargers, there usually is very little perceivable difference. Which is (slightly) better really depends on the charging controller and how it decides when to stop charging.
- When the battery is full, the phone continues to 'trickle charge' for a period of time. This isn't a bad thing. Overcharging a Lithium battery can be extremely dangerous, so normal charging occurs at a high speed and then slows down at a safe limit below the 'true' 100%. After that the phone continues to trickle charge to top up the battery. This is the reason you read in phone manuals you should charge the phone for 8 hours or overnight for its first charge.
- When charging at 500mA, the battery does not get as hot. This usually means you get closer to the true 100% before 'trickle charging' starts. With a 1000mA charge the battery heats up a lot more so charging may switch to trickle much sooner. Here's an example with made up figures.
Lets say you charge your battery with a 500mA charger, and it takes 2 hours. When the phone shows 100% it may actually be at 99%, and trickle charging. Leaving it for another 30 mins may take it to its full capacity.
Now, lets say you charge your battery with a 1000mA charger, and it takes 1 hour. When the phone shows 100% it may actually be at 98%, and trickle charging - It stopped sooner because the battery was hotter. Leaving it for another 30 mins may take it to full capacity.
Conclusion.. the 500mA charger took 2.5 hours, while the 1000mA charger took 1.5 hours. However if you unplugged both when the phone showed 100%, the 500mA charged battery may last longer, and so you think the 500mA somehow resulted in a more thorough charge!
At the end of the day, it doesn't matter which you use. the absolute charge cycles is what counts. Charge to 100%, then dont charge till its 0 for best battery care. Constantly plugging into a charger or dock all day on and off is bad. But having said that, your phone is there to be used, so a sensible balance of the two is the best bet.
Thank you so much for the detailed response, kam187. Would you recommend avoiding using a 5.1V charger, considering the phone came with a 5V charger?
Sent from my Galaxy Nexus using Tapatalk
I wouldn't use it. The 0.1v probably won't make any difference, but it may not be regulated. Chargers with these odd values sometimes don't have any regulator inside them. That could damage your phone as the voltage could shoot up and down as the current draw changes.
Just search amazon/ebay for any MicroUSB charger, and pick one from a reputable manufacturer like Motorola, HTC, Samsung etc. Since all phones now use MicroUSB, there's loads of these chargers around from previous phone models etc.
Here's just one I saw on amazon.com:
http://www.amazon.com/Samsung-Trave...E70I/ref=sr_1_3?ie=UTF8&qid=1322808220&sr=8-3
I just lost my USB wall charger and realized my spares don't charge as fast as my previous one...
My previous charger had my phone at +700ma while in sleep, two of my spares can do 400 and one can only do 200!
One time I used a car charger that had me at +900ma in sleep so I would like to try and find a new wall charger that can get me +900.
BTW all the chargers I have used have said they are 5v 1000ma, so clearly I can't just go by the specs they list- I need a first hand experience of a quality charger.
So I open it to the forums. Anyone here have experience of a particularly strong USB wall charger?
I got a good Motorola one on Amazon for pretty cheap and it's been going strong for a while.
Sent from my GT-N7100 using xda app-developers app
Well, you do need one that's 1000mAh.
You just need one from a reliable manufacturer that's not mis-labelled crap.
I'd just look for a quality brand. I got lucky with one for $1.50 on eBay but the seller isn't selling them any more.
Hm so I guess OEM or genuine name brands should reliably be up to their specs, then? Well, I guess I'm going to shop around for one that maybe says 1500ma or more because I believe my phone can take more than a 1A charger can give it, and it probably won't disappoint
Samsung note II have a battery of 3,100mAh, the charger is 2000mA(2A). but my i can use the same charger for my S2. so i guess that the amphere doesn't really matter. just that the higher the amphere of the charger, the faster it charge. But you sure need a higher amphere charger for bigger battery. Hope this help.
seacreature said:
Samsung note II have a battery of 3,100mAh, the charger is 2000mA(2A). but my i can use the same charger for my S2. so i guess that the amphere doesn't really matter. just that the higher the amphere of the charger, the faster it charge. But you sure need a higher amphere charger for bigger battery. Hope this help.
Click to expand...
Click to collapse
I've read that smartphones (at least android phones) have controlled charging circuits that will only allow for as much amperage as they are set to allow. So if you connect a 2000mA charger to the phone but it's limited to 1000mA then it will only draw 1000mA. However as I have noticed just because a charger says it can output 1000mA doesn't mean that it can. I have tried 4 different 1000mA chargers each with pretty different outputs- and if they don't output as much as your phone will take it WILL charge slower. The point of this thread was to gather information on which chargers are reliably fast and ideally economical ones (there's enough OEM chargers I can find for 10x the price of off-brand ones that would hopefully do the job right).
Has anyone had any success with after market rapid charging solutions? I see the OEM model number of the charger that came with the phone is ETA0U61JBEGSTA.
Has anyone found a generic equivalent for this charger? The last 2 amazon ones I bought were really slow charging & took over 4hrs to fully charge.
I use the monoprice 2.1 amp charger it works great. It may damage your battery but to me it doesn't matter I'll buy a new battery in a year for $15 if I have too.
http://www.monoprice.com/mobile/Pro...Id=108&categoryId=10851&subCategoryId=1085102
It has 4 ports 2 of them are 2.1amp and the others are 500mah I believe so I can plug in my ipod as well
Also bought their 2.1 amp car charger
http://www.amazon.com/gp/aw/ol/B00822J004?c=n&qid=1365830047&sr=8-2
Got it for $6.50 from Planet Mobile and fulfilled by Amazon. Looks and works perfectly.
Razorblood said:
http://www.amazon.com/gp/aw/ol/B00822J004?c=n&qid=1365830047&sr=8-2
Got it for $6.50 from Planet Mobile and fulfilled by Amazon. Looks and works perfectly.
Click to expand...
Click to collapse
6.50? very cheap
After seeing this article http://www.androidcentral.com/acces...mium-charger-rapid-charges-android-phones-too last year, I picked up a couple for $10ea. from an online source that was going out of business. They are available for ~$15 today. This is the only thing BB offers that rocks.
For an inexpensive but quality solution, try Monoprice.
Edit: If I forget to plug in at night, in the time it takes me to get ready to leave for work, I am at 90% or better.
Just FYI, for those commenting about using chargers higher than 1A (1000 mAh), the stock kernel will only allow 1A of current to reach the battery regardless if the charger is of a higher capacity. However there are custom kernels (such as Perseus) that allow this value to be overridden, so that the battery can be charged with more than 1000 mAh of current. It is recommended to not charge the battery with a value higher than 0.7 of the battery's total capacity. For the stock 2100 mAh battery, you will want to set the charging value to 1470 mAh or less.
n023b said:
I use the monoprice 2.1 amp charger it works great. It may damage your battery but to me it doesn't matter I'll buy a new battery in a year for $15 if I have too.
http://www.monoprice.com/mobile/Pro...Id=108&categoryId=10851&subCategoryId=1085102
It has 4 ports 2 of them are 2.1amp and the others are 500mah I believe so I can plug in my ipod as well
Also bought their 2.1 amp car charger
Click to expand...
Click to collapse
It wont damage your device. If you havent altered stock parameters than it wont draw more power than 1 amp
Sent from my GT-I9300 using xda premium
I seem to remember seeing there was a cable mod to make the S3 charge faster? actually pull in more juice quicker? As I recall you had to modify the USB cable with a resistor in the right place?
I have plugged my S3 in a 2.1amp charger and I don't see it charging any faster than the 1.0amp charger. My wife's iPhone 4S however charges MUCH faster on the 2.1amp charger vs the 1.0amp charger
I'd like to figure out a way to make the S3 charger more quickly using a 2.1amp (or 1.0amp) charger if that's possible.... but I didn't book mark the thread when I saw it and can't find it again