Hi,
got this issue after installing RENOVATE final 1 ROM.
cant go now to Recovery mod, when i try it just makes the recovery screen like its loading and after few seconds it goes to ROM INSTALLATION, like im trying to install again the Renovate rom, which im not. (have the same options of choosing red or blue theme).
also, i get notification from the Rom updater - OTA to download new update (Final 3) and install - it gives me the same issue when i try to update.
now, im afraid to try and install a new rom, that it might and will lead to a brick phone?
what do i do?
Does the rom boot up to the OS ? If so....delete the files (ota, full rom) from the sdcard with a file explorer app !
Then try to enter the recovery again.
Yes the rom boots up and i use the phone daily with no problems...
so i just need to delete all those files??
Yes the rom boots up and i use the phone daily with no problems...
so i just need to delete all those files??
Yes delete all ota files. They are probably in the download folder. You need to stop the autoinstall that happends inside the recovery. If it can't find those files it will hold off the updates ......
Related
I'm so confused as to how to use ROM Manager on the slide. And the posts in the slide forum about rom manager aren't really any help.
Can someone please make a howto for the use of rom manager for the slide?
So far, i've updated the recovery to version 2.5.x.x (or something like that). Right now, i'm trying to install ChromaticSlide and i tried to do the "install from sd" option in rom manager. When it reboots to recovery, i get the phone with the green arrow for <1sec and then i get a red ? mark and if i don't touch anything it reboots. If i do press a button, i get the error messages.
How do i go about flashing through rom manager successfully?
If you have clockwork recovery on your SD card, inside a .zip called update.zip, you go into your normal recovery, the stock android one, then you flash that recovery (update.zip). Then it should boot into clockwork.
geoffcorey said:
I'm so confused as to how to use ROM Manager on the slide. And the posts in the slide forum about rom manager aren't really any help.
Can someone please make a howto for the use of rom manager for the slide?
So far, i've updated the recovery to version 2.5.x.x (or something like that). Right now, i'm trying to install ChromaticSlide and i tried to do the "install from sd" option in rom manager. When it reboots to recovery, i get the phone with the green arrow for <1sec and then i get a red ? mark and if i don't touch anything it reboots. If i do press a button, i get the error messages.
How do i go about flashing through rom manager successfully?
Click to expand...
Click to collapse
This can be caused by two things.
A) Do you still have the update.zip from on your sd card from when you rooted?
B) Did you flash the eng build?
migueltherocker said:
This can be caused by two things.
A) Do you still have the update.zip from on your sd card from when you rooted?
B) Did you flash the eng build?
Click to expand...
Click to collapse
A) Yes.
B) Yes.
Still no Clockwork for me.
i can get into clockwork just fine manually. But how do i flash through ROM Manager like other people do in the ENG build? It won't even reboot into recovery when i select the option.
It seems not to like to work on the ENG build (and yes i'm running the ENG build). ROM Manager will download the newest recovery image, but it will only stay in the clockwork folder on the sd card. I did though seem to get it to work after flashing to a CM6 build (it put a recovery-update.zip file in a different folder inside the clockwork folder and when i said boot into recovery to flash a ROM, it has the phone with green arrows and flashed fine, it just won't do it from ENG build)
EDIT FOR CLARITY:
A) I have the update.zip i used for root in the root of the sdcard.
B) I have the ENG build flashed.
I also have free rom manager installed. I selected within rom manager to flash clockwork recovery (which it did and says the current and latest recovery is v2.5.0.1).
It also created a file in sdcard/clockworkmod/koush.tandtgaming.com/recoveries/ called recovery-clockwork-2.5.0.1-espresso.zip.
If i go to flash a rom from within the ENG build using rom manager, i get the option to "backup current rom" and to "wipe data and cache" before flashing. And when it goes to reboot, it doesn't do anything.
However, when i went to flash from ChromaticSlide to CM6 using rom manager, it put a file called recovery-update.zip in one of the clockworkmod folders and rebooted and flashed without any input from me. So i'm confused as how to get ROM manager to work from within the ENG build. I also don't get a SU permission notice about rom manager from within the ENG build but i do get a SU permissions request from within the other ROMs by rom manager
EDIT2: Lol, i just told rom manager to flash clockwork a 2nd time and it gave me the SU permissions request and then when i told it to boot into recovery, it rebooted into recovery. Nevermind about the last stuff.
Guys i need your help ..i got cm 10.1 jelly bean on my htc one x n on cm updates wheneva i download n install it directly from my htc when the update complete it go on booot loop ..
all i have to do is to wipe the phone complete and re install cm on my phone.. and i saw a post where u need to go to cwm recovery to install it by using install from sdcard can anyone tell me how to do it properly without losing any data .. and another thing do i have to install each update ?
i install by using tHe latest update 20130324 do i have TO INSTALL ALL UPDATE bcz with 20130324 I cant use flash light in camera whereas in previous update 20130323 i could use flash light help me thank you
1. Dl rom using cm updater
2. Boot to recovery
3. Flash it /sdcard/cmupdater
4. Flash the vendor installer
(5) If you bootloop, flash the boot.img also.
No you dont need to install every update. Do it like once a week and youll still get all the changes.
@flashlight There might be some minor flaws because it's an automated build system. If you lose some feature you care about just revert to a backup.
TToivanen said:
1. Dl rom using cm updater
2. Boot to recovery
3. Flash it /sdcard/cmupdater
4. Flash the vendor installer
(5) If you bootloop, flash the boot.img also.
No you dont need to install every update. Do it like once a week and youll still get all the changes.
@flashlight There might be some minor flaws because it's an automated build system. If you lose some feature you care about just revert to a backup.
Click to expand...
Click to collapse
Ty i will try to do it as u say next time by flast ir u mean install it ? From recovery? I select install from sd ?
Yeah.
Hey guys!
First sorry if this is wrong subforum, or there is an anserw for my problem. I spent about 5 hours on trying to do this.
Firstly I'm a noob in this subject.
I want to flash rom X - Gamer or True Smooth. ( are they any good?)
And I flashed generic .62 on my phone (Xperia Arc ) but I don't know what to do next.
I tried doing all those drivers, CWM, kernel things but I'm just lost now.
I can't learn all the things in one day..
Can someone give me links to best versions of things I need and say step by step how to do it? (or link to good toutorial)
Thank you so much for any help guys!
~ J
you need first flash kernel, then you must open cwm and set your zip file of rom from your sd card
So I need to paste it on SD card in zip? K.
When I'm trying to flash it in fastboot mode that appears "ERROR - This action can only be done in fastboot mode"
Do you have unlocked bootloader?
You have to place the ROM .zip file on the SDcard.
Depending on the bootloader status, you have to either install custom kernel for CWM Recovery or install one in system partition, latter being more riskier.
Someguyfromhell said:
Do you have unlocked bootloader?
You have to place the ROM .zip file on the SDcard.
Depending on the bootloader status, you have to either install custom kernel for CWM Recovery or install one in system partition, latter being more riskier.
Click to expand...
Click to collapse
Yup I've gott my bootlader unlocked.
So what next after placing .zip file on SD?
"- Copy ROM setup file to SD card
- Enter CWM and choose the setup file
- Follow instruction in AROMA installer, customize the ROM as you like and click Install. NOTICE: in Extra section, unchecked item means you don't like it to install with this ROM, so it will be removed if it's already existed (in case you re-install the ROM)"
These are isntructions, so how do I intall CWM correctly?
Phone is rooted, I've got recoveyx on it and i installed CWM for GB. But I can't acces recovery mode. I spammed back button, volume down, hold it..
Please help..
If you have unlocked bootloader, get custom kernel for GB (LuPuS or DooMKernel), flash it in fastboot mode, get into the recovery, factory reset, wipe /system and then install zip from sdcard and choose the ROM zip.
Having unlocked bootloader and then rooting phone, installing CWM via an app is useless, time-wasting and caused many issues.
Okay I'm lost again.. I flashed Lupus and my phone didn't want to start. Blue led flashed but screen was still black..
now I've got android version 2.3.4 (4.0.2.A.0.62) generic.
Bootloader is unlocked (100% sure)
Which kernel should I choose to make this work?
Sorry I'm so nooby in this subject
------------------------------------------------------------------------------------
K I kindof sorted everything. Thx for help!
Hi there,
Nice to meet you guys.
Please I'm new here, been looking for where to post this thread.
Please I got an sm-t311 running on android jelly beans, which I wanted to flash with a 6.0 ROM. But I have tried to no avail. I download the resurrection ROM, but when I try to install through recovery mode from via SD card, I get "error installation aborted invalid OTA missing scatter" the phone can't go to download mode, but can go to recovery mode. When try to enter download mode, I get a menu with chinese . I rooted it well, but tried other zip files from recovery mode, I get same error message. I install mobile uncle tools apk, but when I go through the app to try and install any zip file, nothing worked. Sometimes when I click on bootloader from inside mobile uncle tools app, it says no bootloader installed on phone. Please really, really need some help. When I power on the tablet, I get an animation "TUKKER" its having multiple language. I tried using fast boot command from PC, it can't work or its because I don't know what to command. But PC always identify device as SM-T311. PLEASE HELP!!!! but phone is working normal but I need to run android 6.0.
5kstore said:
Hi there,
Nice to meet you guys.
Please I'm new here, been looking for where to post this thread.
Please I got an sm-t311 running on android jelly beans, which I wanted to flash with a 6.0 ROM. But I have tried to no avail. I download the resurrection ROM, but when I try to install through recovery mode from via SD card, I get "error installation aborted invalid OTA missing scatter" the phone can't go to download mode, but can go to recovery mode. When try to enter download mode, I get a menu with chinese . I rooted it well, but tried other zip files from recovery mode, I get same error message. I install mobile uncle tools apk, but when I go through the app to try and install any zip file, nothing worked. Sometimes when I click on bootloader from inside mobile uncle tools app, it says no bootloader installed on phone. Please really, really need some help. When I power on the tablet, I get an animation "TUKKER" its having multiple language. I tried using fast boot command from PC, it can't work or its because I don't know what to command. But PC always identify device as SM-T311. PLEASE HELP!!!! but phone is working normal but I need to run android 6.0.
Click to expand...
Click to collapse
Jelly Bean? I believe Kitkat must be installed for you to update to lollipop or marshmallow. I also own an sm-t311 (3g version).
I also had trouble installing custom roms on it, but after some minor changes inside the installation files, any rom can be installed.
So first thing is, backup your stuff, backup EFS folder too if you can, and then proceed to update your tablet to latest official Kitkat.
I would flash it with Odin software, but since you say you cannot enter download mode, i would try to update it with the
samsung software Kies3 , if that does not work, Smartswitch. These last ones will even put the phone in a "special" download mode for you.
If that does not work i would try to download latest kitkat manually (http://www.sammobile.com/firmwares/database/SM-T311/ check latest version for your country/carrier )
After you manage to install the stock latest Kitkat rom, in order to upgrade it to android 5 or 6 , you will need to install a "custom recovery" like TWRP etc. Did you do that ? you cannot install custom roms via "stock recovery", you must first have a custom recovery installed and afterwards you will be able to update (the stock kitkat) into any custom : Cyanogenmod, RessurectionRemix, Nolekat, Bliss, OMNi etc
Since i own the same device, feel free to contact me in case you need help, we can chat via Hangouts/Skype/Whatsapp and we can do it together step-by-step.
Cheers from Brazil,
Piridroid
Hi in this thread I am going to explain a few steps to get back to STOCK when you are in CUSTOM ROM
.....NO PC Required.....
.....ROOT REQUIRED....
.....Charge upto 60.....
Note:-
-Need root with SuperSU or Magisk(<v14.2) or CM/Lineage SU for Working
-FlashFire Development is stopped and may not work on newer android versions.. I tested it on Nougat and Marshmallow only
0. Take Backup before continuing.
1. Download the stock ROM for your specific device and keep it in your Internal or sd card.
2. Download "Flash Fire" app
3. Grant SuperUser permission and Tap on + icon, select wipe option and by putting it default tap on on the top right corner.
4. Again Tap on + , select Firmware Package that you downloaded before.
5. After scanning archive deselect Recovery and tap on on the top right corner.
6. Finally tap on FLASH.
After a minute or two the process begins....
If not pull down the battery and restart as usual and repeat same after charging over 60%.
Note:- Internal Storage is not wiped after flashing in S4 mini so don't worry about it....
That's it....
I tested many times in my mobile I9192....because I don't have PC ????
Reserved
Reserved#2
Must it be Custom ROM?
For example, if i want to upgrade my Stock ROM to a newer version?
theheartbenvn said:
Must it be Custom ROM?
For example, if i want to upgrade my Stock ROM to a newer version?
Click to expand...
Click to collapse
No need to be in a custom rom...
It is very powerful app...
If you dont know how to flash stock rom and unbrick your device... dont use FlashFire app...
You can use that app for upgrading to newer version too..
HemanthJabalpuri said:
No need to be in a custom rom...
It is very powerful app...
If you dont know how to flash stock rom and unbrick your device... dont use FlashFire app...
You can use that app for upgrading to newer version too..
Click to expand...
Click to collapse
I do know those. It's just i'm temporary separated from my computer right now, and as i've heard, ROM flashing should only be done via bootloader level ( e.g through ODIN... ).