Hi,
SM-P600 without ROM, without recovery, Kies and Odin doesn't work.
How can I reflash stock ROM or CM12 rom ?
Device : SM-P600 (with samsung rom stock 4.4!?)
I root my tablet with odin and teamwin 2.8.0.0 (PDA field + tar file)
the root flash should success.
I restart in recovery and install custom rom CM12 + Gapp
the tablet restart and stay to CM12 loading during all the night.
I come back into recevery mode
I try to wipe cache/dalvik => unable to mount cache/dalvik
I try to wipe cache => unable to mount cache
I try to wipe system => unable to mount system
I install Kies on my computer and try to restore the official rom with it.
The download of the rom is ok and Kies try to send the rom to the table a transfer is running during 15min (progress bar into computer windows, but no progress bar into tablet).
After that a second transfer progress bar into computer stay to 0% during 1 hour. I unplug my tablet.
Now I have got a table without recovery. I have access to download mode.
But I cannot transfer stock rom (PDA field) with Odin.
Thx for your help.
Staying at your disposal
I can flash recovery mod (TeamWin) with Odin.
But I cannot send Kies tar file by Odin.
I am downloading old stock rom (*tar) to transfer by Odin 3.09
How can I convert a CM12 zip file in tar file to tranfer it (I haven't SD card)
You could use a USB OTG cable (micro USB plug on one end and a socket like the USB ones on a computer on the other), one of these:
http://m.ebay.com.au/itm/301542874539?nav=SEARCH
And use it to plug a USB stick with the zip file on it into your tablet. You would have to mount it in twrp before flashing the zip.
They are a very useful cable to have, if your screen breaks and touch doesn't work you can use it to plug a mouse into the android device and use that for things like backing up your data before repair or disposal.
Hi I fixed the problem,
Re-Flash TWRP (many time) en try to install an unofficial KitKat version (information were write into NAND) but this version bootloop.
I wipe cache, cache/dalvik, Data, System (some eror were display in red, mount error)
I install the unofficial CM12, then the Android invite was displayed :victory:
I setup the unoficial CM12.
Reboot in recovery mode to install gapp
@Nameless One, thx for your help. In TWRP, the mount doesn't work in my case !? (It works with my Galaxy S4)
Appology for my poor English
Hi Dribounet
Dribounet said:
Hi I fixed the problem,
Re-Flash TWRP (many time) en try to install an unofficial KitKat version (information were write into NAND) but this version bootloop.
I wipe cache, cache/dalvik, Data, System (some eror were display in red, mount error)
I install the unofficial CM12, then the Android invite was displayed :victory:
I setup the unoficial CM12.
Reboot in recovery mode to install gapp
@Nameless One, thx for your help. In TWRP, the mount doesn't work in my case !? (It works with my Galaxy S4)
Appology for my poor English
Click to expand...
Click to collapse
Hi Dribounet
I have similar issue with my SM-P600.
I have tried 10 official roms , official and custom recoveries also , without success. I am absolutely sure that I am not following correctly the procedure using Odin and its version or combination of this plus wrong official ROM and so on.
Also have tried to use PIT file because I think something goes wrong with the partitions but not success again,
Would you advice with your steps you follow in order to succeed installing custom recovery.
Can I install only the recovery without ROM and how I can run in it ( button combinations)
For now I am just able to run in Download mode and with one official ROM to run the process to the middle- then goes in error with Odin and when reboot the device it shows message "Firmware upgrade encountered an issue ..... "
Thanks in advance for all answers
p600 bricked
kafencetu said:
Hi Dribounet
I have similar issue with my SM-P600.
I have tried 10 official roms , official and custom recoveries also , without success. I am absolutely sure that I am not following correctly the procedure using Odin and its version or combination of this plus wrong official ROM and so on.
Also have tried to use PIT file because I think something goes wrong with the partitions but not success again,
Would you advice with your steps you follow in order to succeed installing custom recovery.
Can I install only the recovery without ROM and how I can run in it ( button combinations)
For now I am just able to run in Download mode and with one official ROM to run the process to the middle- then goes in error with Odin and when reboot the device it shows message "Firmware upgrade encountered an issue ..... "
Thanks in advance for all answers
Click to expand...
Click to collapse
I have the same problem! There is download mode only - NO recovery, NO rom! ((
I have tried to flash original rom from sammobile via Odin. No results.
Who can help???
uno mas said:
I have the same problem! ((
Who can help???
Click to expand...
Click to collapse
Still do not have the answer and solution.I have start thinking that this is hardware issue. But when i have got it intially from the service it was able to boot in a stock bootloader and I have done something wrong with Odin and since then not able event to go in stock or custom bootloader.
Sent from my LG-D855 using Tapatalk
kafencetu said:
Still do not have the answer and solution.I have start thinking that this is hardware issue. But when i have got it intially from the service it was able to boot in a stock bootloader and I have done something wrong with Odin and since then not able event to go in stock or custom bootloader.
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
In other words - should I go to the service?
uno mas said:
In other words - should I go to the service?
Click to expand...
Click to collapse
If you did not do something with it that makes the warranty not valid it is advisable to send it to service, unfortunatelly I have rooted it and they refused to accept it
Sent from my LG-D855 using Tapatalk
kafencetu said:
If you did not do something with it that makes the warranty not valid it is advisable to send it to service, unfortunatelly I have rooted it and they refused to accept it
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
SOLVED!!!
http://forum.xda-developers.com/showthread.php?t=2719750
http://forum.xda-developers.com/galaxy-note-10-2014/help/pit-stock-pit-file-thread-t2989266
uno mas said:
I have rooted also. No the warranty. But it doesn't matter if you have a bricked. ((
The Odin starts writing but no finish.
Click to expand...
Click to collapse
yep this is the case , Odin start process of writing and then suddenly - error - in the middle of the procedure.
I have tried to install only custom bootloader - pass successfully ,but then I am not able to go in bootloader mode ( I am trying with Volume down + Power , do not know is that correct - do you have an idea? )
uno mas said:
SOLVED!!!
http://forum.xda-developers.com/showthread.php?t=2719750
http://forum.xda-developers.com/galaxy-note-10-2014/help/pit-stock-pit-file-thread-t2989266
Click to expand...
Click to collapse
Hello uno mas
would you advice what tools you have used and also what order you have follow.
First update PIT and then installed the ROM or other
Thanks in advance for time and efforts!
This is the first time I've ever done this, but I just hated the UI on the Huawei G8 (laggy) and decided to try the xda way. PS: knowing that it's easier to help someone when they tell all the details, I am going to post all of it. So sorry for the long post.
First thing I did was try to update to unofficial marshmallow downloaded from here. But it didn't work saying installation failed ... Did some research and found out the device OS is from Iran (I'm from the middle east), so probably the reason why it didn't allow me to install an EU update.
What I did then was unlock bootloader by getting the unlock code from emui website. And then unlocking it from the adb terminal (adb.exe)
Then I loaded TWRP and did a backup.
I forgot to copy SuperSu to the SD card, and when TWRP asked me to root I accepted. So it got stuck on the Huawei logo while booting.
I then did a recovery from TWRP which worked perfectly
I should've just downloaded a new rom and flashed that , but I was like maybe it might allow me to install that update now the phone is unlocked so I tried installing it from the updater ->local update. And that's when the looping into recovery happened.
So I tried to do another recovery from my backup , but again it loaded into TWRP . Which I don't understand since I guess it should load the backed up System. Or is there something telling the device to reload the update from the SD card causing it to crash again ?
UPDATE: I went into file manager and renamed the dload folder to dloadxxx but that didnt help. Then I downloaded the latest TWRP and flashed that, and recovered the backed up system and THAT worked . The restore took longer than with the older TWRP . I have no clue why it worked like this. But maybe this can help someone in the future.
Thanks
Had the same thing. Exept that this happend during OTA update ....
Get a stock ROM of your choice (tested with xxxB130xxx).
Use update extractor to extract boot.img, system.img recovery.img
Wipe all partitions (except external SD Card) with TWRP. Select remove data and confirm. (you said you have backup). This allows a clean install.
Bring phone into fastboot mode (Vol down + power)
Flash bootlader with fastboot
Make Reset
Flash recovery and system
After reboot phone should start up normal.
Let me know if you got stuck somewhere.
Chilli
Edit: Root cause for the problem seems that Hauwei needs stock recovery for some update actions. -> When ever you want to make OTA or dload update flash back to stock recovery before (better flash completely to stock ).
vlatkozelka said:
This is the first time I've ever done this, but I just hated the UI on the Huawei G8 (laggy) and decided to try the xda way. PS: knowing that it's easier to help someone when they tell all the details, I am going to post all of it. So sorry for the long post.
First thing I did was try to update to unofficial marshmallow downloaded from here. But it didn't work saying installation failed ... Did some research and found out the device OS is from Iran (I'm from the middle east), so probably the reason why it didn't allow me to install an EU update.
What I did then was unlock bootloader by getting the unlock code from emui website. And then unlocking it from the adb terminal (adb.exe)
Then I loaded TWRP and did a backup.
I forgot to copy SuperSu to the SD card, and when TWRP asked me to root I accepted. So it got stuck on the Huawei logo while booting.
I then did a recovery from TWRP which worked perfectly
I should've just downloaded a new rom and flashed that , but I was like maybe it might allow me to install that update now the phone is unlocked so I tried installing it from the updater ->local update. And that's when the looping into recovery happened.
So I tried to do another recovery from my backup , but again it loaded into TWRP . Which I don't understand since I guess it should load the backed up System. Or is there something telling the device to reload the update from the SD card causing it to crash again ?
UPDATE: I went into file manager and renamed the dload folder to dloadxxx but that didnt help. Then I downloaded the latest TWRP and flashed that, and recovered the backed up system and THAT worked . The restore took longer than with the older TWRP . I have no clue why it worked like this. But maybe this can help someone in the future.
Thanks
Click to expand...
Click to collapse
h t t ps://mega.nz/#!P04D2S5Y!Yn2CL5wLC8ISb5AcNR9MTxzhAq3yVH3weG60go5zQCA download this archive, change twrp inside it with the lastest one that surdu_pertu provide.
go twrp wipe all things there
than
using adb "fastboot flash recovery stock.img"
after the first boot phone gonna think a new firmware is being installed just skip it and power off the phone
this will give you a nice start for flashing the Marshmallow from the begining.
Hello Demage,
I would be looking forward to having an Marshmallow image (if it supports my basebands). But Mega says the key is invalid. Can you double check?
Chilli
Thankfully, I managed to fix it.
1- Download Marshmallow G8 stock ROM.
2- Download Huawei update extractor, then extract recovery.img using the previous tool from the stock ROM Update.app file.
3- Go to the bootloader, then flash the extracted recovery.img into recovery.
4- Reboot by the command fastboot reboot.
5- You will get the default loading screen saying the device is reset, then you will be directed to the system welcome screen.
6- You can flash TWRP again, then superSU.
Hi,
I have installed MIUI in my OP3 this morning, which was working fine. There was an OTA update, after installing it, device rebooted and entered into recovery mode and it was hanging there for more than an hour. Whrn I tried to reboot, it was off and never came up. Tried unbrick using MSM Download Tool and then I am able to get into boot loader screen. From there I have tried to flash TWRP, but if I reboot, I am getting this message only. Currently I have access to bootloader, if I flash TWRP and choose to boot from recovery (from pc), I have access to OTG also. But even after flashing a ROM, If I reboot, I am getting attached screen only.
I have access to TWRP, only when I chiose to reboot from All in one tool from PC.
Please help me.
you have to use method 2of unbrick not method1.it will flash whole stock rom , then reboot enable developer options etc then flash twrp recovery then go ahead.
Use Method 2. Make sure to follow all steps. Please do quote me otherwise i do not know if you need any further help.
You flashed oficial beta update on mui rom and you have a mess.
Download official OP 4.1.6 rom and try to flash it.
if its not fixed the try wipe everythng (system data ect) and then flash the rom
Puddi_Puddin said:
Use Method 2. Make sure to follow all steps. Please do quote me otherwise i do not know if you need any further help.
Click to expand...
Click to collapse
Hi,
I am following method 2 now. I have switched off the phone and connecting to laptop, as soon as I connect to laptop, it is getting into bootloop (without pressing any button). Phone is not detected in laptop.
colossus_r said:
You flashed oficial beta update on mui rom and you have a mess.
Download official OP 4.1.6 rom and try to flash it.
if its not fixed the try wipe everythng (system data ect) and then flash the rom
Click to expand...
Click to collapse
I have tried to by wiping everything and tried to restore from OTG pendrive. Tried to flash Firmware + Modem, tried to flash different ROM. Nothing helped.
I am in travel now, having limited internet connectivity. I will reach home and then try to download official OP as you suggested.
I do not have data in phone, all the data is already copied to laptop.
colossus_r said:
You flashed oficial beta update on mui rom and you have a mess.
Download official OP 4.1.6 rom and try to flash it.
if its not fixed the try wipe everythng (system data ect) and then flash the rom
Click to expand...
Click to collapse
Finally, method 2 worked. Thanks a lot.
nagurvidyasagar said:
Finally, method 2 worked. Thanks a lot.
Click to expand...
Click to collapse
I was having the same problem like you how did you solve it ?
Hello everyone !
I have a xiaomi Mi A2 lite for few days, based on Pie 9.0. I decided to install a custom rom on it (resurrection or lineage OS16) so I unlocked the bootloader, rooted properly the phone, and then tryed to use TWRP to install a new ROM.
Unfortunatly, I never succeeded to do so: each time I tried, the installation failed, showing an "error 1".
Trying to fix this issue, I unfortunatly deleted the OS of my phone, and still can't install a new ROM. I tried to flash a stock ROM from xiaomi site, following this thread: https://forum.xda-developers.com/mi-a2-lite/help/os-image-please-help-t3885625/page3 , but Mi flash tool doesn't work well on my computer (it's still showing an "unhandled exception" error, whatever I'm trying to do.
Here we are, I've got two problems and I don't really know what to do, despite my searching on the web. My phone is now unusable (I can access to the TWRP recovery, can use fastboot, but that's all..)
Do you have any advice to clean up all the mess I did ?
Thank you a lot for your time !
Download the stock rom (preferably 10.0.3.0) extract it along with adb and fastboot into the same folder, install the drivers, boot into fastboot, connect it to PC and run flash_all.bat and you should be back onto stock rom! If you want to install a custom rom follow this: github. com/tkchn/daisyinstall/blob/master/README.md
Armandpewpew said:
Hello everyone !
I have a xiaomi Mi A2 lite for few days, based on Pie 9.0. I decided to install a custom rom on it (resurrection or lineage OS16) so I unlocked the bootloader, rooted properly the phone, and then tryed to use TWRP to install a new ROM.
Unfortunatly, I never succeeded to do so: each time I tried, the installation failed, showing an "error 1".
Trying to fix this issue, I unfortunatly deleted the OS of my phone, and still can't install a new ROM. I tried to flash a stock ROM from xiaomi site, following this thread: https://forum.xda-developers.com/mi-a2-lite/help/os-image-please-help-t3885625/page3 , but Mi flash tool doesn't work well on my computer (it's still showing an "unhandled exception" error, whatever I'm trying to do.
Here we are, I've got two problems and I don't really know what to do, despite my searching on the web. My phone is now unusable (I can access to the TWRP recovery, can use fastboot, but that's all..)
Do you have any advice to clean up all the mess I did ?
Thank you a lot for your time !
Click to expand...
Click to collapse
Are you sure that you followed the procedure to install a custom rom? Can you tell which steps did you do? And about the error of MiFlash you can try with other version so there are many versions uploaded that don´t match well.
If you can't use the fastboot u need to force EDL Mode.. The best and simple way to install the ROM stock is using MI Flash Tool, u can find a tutorial in here or in YouTube it's easy if you follow all the steps! Good Luck
Armandpewpew said:
Hello everyone !
I have a xiaomi Mi A2 lite for few days, based on Pie 9.0. I decided to install a custom rom on it (resurrection or lineage OS16) so I unlocked the bootloader, rooted properly the phone, and then tryed to use TWRP to install a new ROM.
Unfortunatly, I never succeeded to do so: each time I tried, the installation failed, showing an "error 1".
Trying to fix this issue, I unfortunatly deleted the OS of my phone, and still can't install a new ROM. I tried to flash a stock ROM from xiaomi site, following this thread: https://forum.xda-developers.com/mi-a2-lite/help/os-image-please-help-t3885625/page3 , but Mi flash tool doesn't work well on my computer (it's still showing an "unhandled exception" error, whatever I'm trying to do.
Here we are, I've got two problems and I don't really know what to do, despite my searching on the web. My phone is now unusable (I can access to the TWRP recovery, can use fastboot, but that's all..)
Do you have any advice to clean up all the mess I did ?
Thank you a lot for your time !
Click to expand...
Click to collapse
The first problem with TWRP Error code :1 - the problem is with twrp itself- install a different version ,i am using 3.3.1-0 by offain ,i've had this error on allmost every twrp besides the offain versions and dees_troy.
The second problem : with the deleted os : you have 2 options :
1. Download the latest MiFlash from the official site and install it ,on the top left of the screen, you can see Drivers button ,click on install. Then navigate to stock rom folder ,go in fastboot mode on your device and connect to PC ,hit refresh ,then flash.
2. If this doesn't help ,custom rom is an option ,there are 2 links
https://daisyfiles.pp.ua/Firmwares/MIUI/ - from here download miui version Golden Master 1.1
https://forum.xda-developers.com/mi...ol-one-driversunlocktwrpfactory-t3866191/amp/ - download this all in one tool, you can lock ,relock ,install twrp recovery ,custom roms ,it is perfect!
For the installation - put the rom on sd card ,install twrp version that doesnt give Error 1 code ,then format data,system,cache,dalvik/art ,internal storage.
And the last thing - install the ROM zip and try MIUI 10.5 This is the best temporary solution,until you set MiFlash the right way ,or on another PC
Hello !
First of all, thank you very much for your quick and complete answer
I finally succedeed to flash a stock ROM on the phone, using Mi flash tool, so I'm back on track ! About the "unhandled exception" error, i've just fixed it by creating a "log folder" in the MI flash tool folder, it's good to know, maybe It will help someone else one day ^^
When I tried to install a custom ROM last time, I used the 3.3.1 version of TWRP. Because it didn't work (error 1), I used the 3.3.0 one and I had the same exact error code. Do you think I should try older versions one by one ?
I'm going to unlock it and root it right now,
Thank you again,
Arnaud
PS: Oh, last thing, when TWRP recovery will be properly installed on my phone, shall I root it by using magisk ?
Armandpewpew said:
I'm going to unlock it and root it right now,
Click to expand...
Click to collapse
Updating my situation:
So I successfully installed TWRP 3.3.3-0 on the phone and did a huge backup to avoid deleting my OS again.
Now I'm confused about what to do: I did understand that I need to root my phone (using magisk) BEFORE trying to install a custom ROM, but I'm really not sure about it, should I ?
I tried, and it still doesn't work (error1), I noticed that error 1 shows some interresting details:
"error installing zip file '/sdcard/TWRP/RR-P-v7.0.2-20190907-daisy-Official.zip' "
The point is I do not have any sd card in my phone (for the moment), is it possible that it can't install the ROM because TWRP is trying to install the ROM on an non-existing storage ? I will try to get an sdcard somewhere to check how it behave.
Thank you again,
Armandpewpew said:
Updating my situation:
So I successfully installed TWRP 3.3.3-0 on the phone and did a huge backup to avoid deleting my OS again.
Now I'm confused about what to do: I did understand that I need to root my phone (using magisk) BEFORE trying to install a custom ROM, but I'm really not sure about it, should I ?
I tried, and it still doesn't work (error1), I noticed that error 1 shows some interresting details:
"error installing zip file '/sdcard/TWRP/RR-P-v7.0.2-20190907-daisy-Official.zip' "
The point is I do not have any sd card in my phone (for the moment), is it possible that it can't install the ROM because TWRP is trying to install the ROM on an non-existing storage ? I will try to get an sdcard somewhere to check how it behave.
Thank you again,
Click to expand...
Click to collapse
Nope ,as i said ,error code is with the version of twrp ,i am using TWRP 3.3.3-1 dees_troy ,i've had the same problem as yours ,i was trying to flash from internal memory ,tried flash from sd card,the problem was the same.So i have tried 3 or 4 different versions ,3.3.3-0 (2 different versions ) gave me error 7 ,another 3.3.3-0 destroyed my system image ,3.2.3-0 don't show my sd card in twrp .So download TWRP 3.3.3-1by dees_troy ,i am using it right now ,but i am using the all in one tool ,that i have mentioned in my previous post - no errors ,no mistakes
Okay, I will try the TWRP 3.2.3 then, this is the only one I didn't try
What about magisk ?
SubwayChamp said:
Are you sure that you followed the procedure to install a custom rom? Can you tell which steps did you do? And about the error of MiFlash you can try with other version so there are many versions uploaded that don´t match well.
Click to expand...
Click to collapse
Hi !
I basically followed the procedure here: https://www.the***********.com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/
And then https://gmtechweb.com/resurrection-remix-v7-galaxy-s6/
Thanks for your time
Error 1 is for use official twrp, please read before, only twrp for custom ROMs is offain's twrp 3.3-1.0
Os_Herdz said:
Error 1 is for use official twrp, please read before, only twrp for custom ROMs is offain's twrp 3.3-1.0
Click to expand...
Click to collapse
Sorry I didn't undestand that at all
I will follow the ghitub step by step by using all pieces they provide. Only one thing, they give the Offain TWRP 3.3.0-0. Do you know where I can find the 3.3.3-1 you're all talking about ?
Armandpewpew said:
Hi !
I basically followed the procedure here: https://www.the***********.com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/
And then https://gmtechweb.com/resurrection-remix-v7-galaxy-s6/
Thanks for your time
Click to expand...
Click to collapse
The first link did take me to any place and the second is for other completely different device, I don´t know why following a procedure for a device with a different scheme partition.
It could be that previously you must have a determined firmware as base before to flash any custom rom, in this case you have to flash it using MiFlash tool checking on "clean all" option (preferably)
The moves basically are these:
1.- Boot to twrp-daisy-3.3.1-0-offain.img using fastboot (just boot to, don´t flash it)
2.- Wipe system, dalvik/cache, data from the previous.
3.- In the case is indicated by developer Format data.
4.- Flash the desired rom.
5.- Flash the twrp-daisy-3.3.1-0-offain installer zip (it´s not the same that the boot image) you can use adb sideload or previously move the file to your external SDCard or then to format data transfer the file to your internal SDCard.
6.- Go to the main menu on TWRP and in reboot options change to the other slot from A to B and viceversa, then to switch reboot again to recovery.
7.- Now flash the Disable-Force-Encryption.
8.- In the case (most likely you want) Flash the GApps and flash Magisk at last, then reboot normally.
The links for TWRP are these:
https://androidfilehost.com/?fid=6006931924117887098
https://androidfilehost.com/?fid=6006931924117887097
Hi !
They are too many flashing procedures everywhere, it's a giant mess and it's really hard to find the proper one when we don't use to it
Anyway, I finally succeeded to properly install a custom ROM on my phone by using this procedure: https://github.com/tkchn/daisyinstall/blob/master/README.md
Everything is now working well, thank you all for your help, you saved my day
HELP! I am getting the same error message, i know what I need to do, download the Offain version of TWRP, but none of the links work! Android File Host DOES NOT WORK for some reason. Can someone upload these files somewhere else for me? Please? I have no other way of getting these files, they don't exist anywhere else on the web... I have already tried every other available versions of TWRP and am getting the same error message (1) as OP.
Tipsymario said:
Download the stock rom (preferably 10.0.3.0) extract it along with adb and fastboot into the same folder, install the drivers, boot into fastboot, connect it to PC and run flash_all.bat and you should be back onto stock rom! If you want to install a custom rom follow this: github. com/tkchn/daisyinstall/blob/master/README.md
Click to expand...
Click to collapse
hey sir , i download 10.0.13 sinc emy internet sucks i can't just go and download another 1.5go of 10.0.3.0 , the probleme is i can't find flash_all.bat even miflash and all in one tool say they can't find flash_all.bat can u help me here where can i find it or build it ?
Alecjasonn said:
HELP! I am getting the same error message, i know what I need to do, download the Offain version of TWRP, but none of the links work! Android File Host DOES NOT WORK for some reason. Can someone upload these files somewhere else for me? Please? I have no other way of getting these files, they don't exist anywhere else on the web... I have already tried every other available versions of TWRP and am getting the same error message (1) as OP.
Click to expand...
Click to collapse
Try using this link if AFH is not working : https://daisyfiles.pp.ua/TWRP/